AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

108-7774 GOVERNOR GP S/N 5YL1-60 PART OF 105-1756 GOVERNOR GP-UNIT INJECTOR 3114 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
FILTER GP-FUEL
CONTROL GP-FUEL RATIO
GOVERNOR GP
PUMP GP-FUEL INJECTION

TRUCK ENGINE 3114 TRUCK ENGINE 5YL
 3114 Truck Engine 5YL00001-UP SEBP2223 3114 5YL   (1992)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP
106-4581 GOVERNOR GP
GOVERNOR GP
108-7774 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-4499 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
105-1707 GOVERNOR GP-UNIT INJECTOR
105-1756 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP22230090
 

108-7774: GOVERNOR GP

108-7774 GOVERNOR GP
S/N 5YL1-60
PART OF 105-1756 GOVERNOR GP-UNIT INJECTOR
i00485859 SEBP2223
1087774 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 111-1722 [1] CAM AS  
3. 109-3407 [1] SPRING GP  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-5605 B [4] SHIM (0.5-MM THK)  
7. 100-4391 [1] SPRING-OIL SIDE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP22230091
 

100-4499: GOVERNOR GP-UNIT INJECTOR

100-4499 GOVERNOR GP-UNIT INJECTOR
PART OF 106-4581 GOVERNOR GP
i00188152 SEBP2223
1004499 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7587 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-SHAFT  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 100-6810 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4P-8694 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP22230092
 

100-8271: GOVERNOR GP-UNIT INJECTOR

100-8271 GOVERNOR GP-UNIT INJECTOR
S/N 5YL1-60
PART OF 108-7774 GOVERNOR GP
i00190317 SEBP2223
1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme 1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8272 [1] HOUSING AS  
    SHAFT
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 8T-0269 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [1] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING  
31. 100-5740 [1] SPRING-TORSION  
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
35. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
39. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (0.25-MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] PLATE  
51. 7W-1440 B [8] SHIM (0.12-MM THK)  
52. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
57. 7C-5150 [1] PIN  
58. 100-5743 [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 4P-4983 [1] SLEEVE  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 100-4387 [1] COVER-FUEL RATIO CONTROL  
71. 100-4388 [1] STOP-PRELOAD  
72. 7W-5324 [1] BEARING  
73. 5P-6620 [1] SEAL-O-RING  
74. 100-4390 [1] SPRING  
75. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
76. 100-4395 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 100-4389 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT (M6X0.5-THD)  
87. 2M-9780 [1] SEAL-O-RING  
88. 105-4916 M [1] PLUG  
89. 101-2870 [1] RING-RETAINING  
90. 105-2945 [1] VALVE-GOVERNOR SERVO  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22230093
 

105-1707: GOVERNOR GP-UNIT INJECTOR

105-1707 GOVERNOR GP-UNIT INJECTOR
i00478262 SEBP2223
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  106-4581 Y [1] GOVERNOR GP  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22230094
 

105-1756: GOVERNOR GP-UNIT INJECTOR

105-1756 GOVERNOR GP-UNIT INJECTOR
S/N 5YL1-60
i00478321 SEBP2223
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  108-7774 Y [1] GOVERNOR GP  
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22230095
 

6I-2694: LINES GP-FUEL FILTER

6I-2694 LINES GP-FUEL FILTER
i00395009 SEBP2223
6I2694 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8397 [5] SEAL-O-RING (12.83MM OD)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 9S-4191 [1] PLUG (9/16-18-THD)(9/16-18THD)  
4. 6V-8724 [1] ELBOW (90 DEGREE-9/16-18THD)  
5. 7W-7693 [1] TUBE AS  
6. 7E-5190 [1] TUBE AS  
7. 5P-1442 E HOSE (78 CM)  
8. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
9. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
10. 3J-1907 [8] SEAL-O-RING (15.85MM OD)  
11. 8T-0151 [1] ADAPTER  
12. 7E-5189 [1] VALVE AS (FUEL)  
13. 5F-7054 [1] SEAL-O-RING  
14. 7X-2459 [1] ADAPTER-TEE  
15. 3N-3252 [1] SPRING  
16. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
17. 5P-1046 [1] CONNECTOR  
18. 5P-7813 [1] SEAL-O-RING  
19. 3S-2093 [1] STRAP-CABLE  
20. 5P-4961 [2] CLAMP-HOSE  
21. 115-4184 [1] TEE-O-RING PORT  
22. 115-4233 [1] TUBE AS  
23. 6V-8774 [1] TEE  
24. 8T-0788 [1] ELBOW  
25. 1P-1670 B [1] PLUG-SEAL  
26. 4K-8864 [1] CLIP (CIRCULAR)  
27. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
28. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
29. 119-2955 [1] CLIP  
30. 5C-7261 M [1] NUT (M8X1.25-THD)  
31. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
32. 068-9526 [1] CAP-TUBE  
33. 3J-1907 B [1] SEAL-O-RING  
34. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22230096
 

105-1769: LINES GP-FUEL RATIO CONTROL

105-1769 LINES GP-FUEL RATIO CONTROL
i00478368 SEBP2223
1051769 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. 105-1768 [1] TUBE AS  
  6V-8552 [1] NUT-FACE SEAL (9/16-18-THD)  
  6V-8553 [1] NUT (11/16-16-THD)  
  6V-9622 [1] SLEEVE-REDUCER  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP  
 

#SEBP22230097
 

106-9149: LINES GP-FUEL RATIO CONTROL

106-9149 LINES GP-FUEL RATIO CONTROL
i00492528 SEBP2223
1069149 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. [1] TUBE AS  
  6V-8552 [1] NUT-FACE SEAL (9/16-18-THD)  
  6V-8553 [1] NUT (11/16-16-THD)  
  6V-8559 [1] SLEEVE-FACE SEAL  
  6V-9622 [1] SLEEVE-REDUCER  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP  
 

#SEBP22230098
 

7W-8434: LINES GP-GOVERNOR OIL

7W-8434 LINES GP-GOVERNOR OIL
PART OF 105-1707, 105-1756 GOVERNOR GP-UNIT INJECTOR
i00187776 SEBP2223
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 7W-0367 [1] TUBE AS  
3. 6V-8647 [1] CONNECTOR  
4. 3J-7354 [2] SEAL-O-RING  
5. 4J-5477 [2] SEAL-O-RING  
 

#SEBP22230099
 

105-1764: PUMP GP-FUEL INJECTION

105-1764 PUMP GP-FUEL INJECTION
i00478323 SEBP2223
1051764 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3114 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1765 [1] INJECTOR GP-FUEL  
2. 6V-6228 [1] SEAL-O-RING  
3. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
  M   METRIC PART
 

Information:

Truck Engine News
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Transfer Pump
3114 & 3116 DIESEL TRUCK ENGINES
Fuel Shutoff Solenoid
3114 & 3116 DIESEL TRUCK ENGINES
Wiring Connections For Fuel Shutoff Solenoid<BR> Nonlatching Type (ETR)
3114 & 3116 DIESEL TRUCK ENGINES
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor &amp; Fuel Transfer Pump
3114 AND 3116 DIESEL TRUCK ENGINES
Fuel Shutoff Solenoid
3114 AND 3116 DIESEL TRUCK ENGINES
Unit Fuel Injectors
3114 AND 3116 DIESEL TRUCK ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3114 :

GOVERNOR GP
106-4581 GOVERNOR GP
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-8600 CONTROL GP-FUEL INJECTION
115-4067 TURBOCHARGER GP
TURBOCHARGER GP
107-7588 TURBOCHARGER GP
GOVERNOR GP-UNIT INJECTOR
100-4499 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
105-1707 GOVERNOR GP-UNIT INJECTOR
105-1756 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL FILTER
6I-2694 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
105-1769 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
106-9149 LINES GP-FUEL RATIO CONTROL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL

Truck sale:

CAT 3114
USD $5,878 
CAT 3114

DPX Power
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
 
 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
CAT 3114
Call 
CAT 3114

L & L Equipment Sales
La Vergne, Tennessee
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.