133-3556 PUMP GP-PISTON S/N 5ZL73-105 PART OF 133-3554 PUMP GP-PISTON 5130 MINING EXCAVATOR

HYDRAULIC SYSTEM

PUMP GP

0. 133-3556 PUMP GP-PI
1. 133-3557 PUMP GP-PI
2. 138-4815 PUMP GP-PI
3. 138-4816 PUMP GP-PI
4. 138-4817 PUMP GP-PI
5. 138-4821 PUMP GP-PI
6. 6E-5477 PUMP GP-PI
7. 6E-6047 PUMP GP-PI
8. 6E-6047 PUMP GP-PI
9. 6E-6047 PUMP GP-PI
0. INFORMATION

MINING EXCAVATOR 5130 MINING EXCAVATOR 5ZL
5130 Excavator 5ZL00001-UP (MACHINE) POWERED BY 3508 Engine SEBP2225 5130 5ZL (1992)

HYDRAULIC SYSTEM

PUMP GP

133-3554 PUMP GP-PISTON

133-3555 PUMP GP-PISTON

133-3556 PUMP GP-PISTON

133-3557 PUMP GP-PISTON

138-4815 PUMP GP-PISTON

138-4816 PUMP GP-PISTON

#SEBP22250740

133-3556: PUMP GP-PISTON

PUMP GP-PISTON

133-3556 PUMP GP-PISTON
S/N 5ZL73-105
PART OF 133-3554 PUMP GP-PISTON

i00091282 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7951	[1]	DOWEL
2.	6E-1027	[1]	HOUSING
3.	9X-8482 M	[1]	SETSCREW-SOCKET (M12X1.75X70-MM)
4.	6E-3283 M	[2]	LOCKNUT (M12X1.75-THD)
5.	9S-9334	[1]	PLUG (1-5/16-12-THD)
6.	4I-7693 Y	[1]	ACTUATOR GP-PUMP (MAXIMUM ANGLE)
7.	107-6440 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(IMPL PUMP REGULATOR CONTROL)
8.	6E-1030	[1]	SEAL-DISC
9.	7X-2910	[1]	RING-RETAINING
10.	8T-6594 M	[4]	BOLT-SOCKET HEAD (M16X2X35-MM)
11.	7D-9014	[1]	SEAL-O-RING
12.	6E-1028	[1]	COVER
13.	096-8058	[2]	RING-RETAINING
14.	6E-3334 B	[1]	SHIM (0.1-MM THK)
15.	105-5028	[1]	IMPELLER
16.	6E-3333	[1]	KEY
17.	105-5022 Y	[1]	HEAD GP-PUMP
18.	6E-1026 Y	[1]	ACTUATOR GP-PUMP (MINIMUM ANGLE)
19.	105-5174 Y	[1]	ROTATING GP-PUMP (IMPLEMENT)
20.	9X-8483 M	[1]	SETSCREW-SOCKET (M12X1.75X80-MM)
21.	7M-8485	[1]	SEAL-O-RING
22.	6E-3335 B	[1]	SHIM (0.2-MM THK)
23.	6E-3336 B	[1]	SHIM (1-MM THK)
24.	102-0801 Y	[1]	VALVE GP-SHUTTLE (RESOLVER)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250741

133-3557: PUMP GP-PISTON

PUMP GP-PISTON

133-3557 PUMP GP-PISTON
S/N 5ZL73-105
PART OF 106-5132 PUMP & MTG GP-SWING

i00091283 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6419	[1]	DOWEL
2.	4I-7692	[1]	HOUSING
3.	9X-8482 M	[1]	SETSCREW-SOCKET (M12X1.75X70-MM)
4.	6E-3283 M	[2]	LOCKNUT (M12X1.75-THD)
5.	6E-1025 Y	[1]	ACTUATOR GP-PUMP
6.	106-1434 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
7.	6E-1030	[1]	SEAL-DISC
8.	7X-2910	[1]	RING-RETAINING
9.	106-2384 Y	[1]	COUPLING & MTG GP-PUMP
10.	096-8058	[2]	RING-RETAINING
11.	6E-3336 B	[1]	SHIM (1-MM THK)
12.	105-5028	[1]	IMPELLER
13.	6E-3333	[1]	KEY
14.	105-5022 Y	[1]	HEAD GP-PUMP
15.	114-2052 Y	[1]	ACTUATOR GP-PUMP
16.	105-5021 Y	[1]	ROTATING GP-PUMP
17.	9X-8483 M	[1]	SETSCREW-SOCKET (M12X1.75X80-MM)
18.	9X-6153 M	[1]	BOLT (M6X1X10-MM)
19.	6E-3334 B	[1]	SHIM (0.1-MM THK)
20.	6E-3335 B	[1]	SHIM (0.2-MM THK)
21.	112-4630	[1]	SCREW (1-5/16-THD)
22.	102-0801 Y	[1]	VALVE GP-SHUTTLE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250742

138-4815: PUMP GP-PISTON

PUMP GP-PISTON

138-4815 PUMP GP-PISTON
S/N 5ZL106-UP
PART OF 106-5131 PUMP & MTG GP-IMPLEMENT

i00606981 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	138-4817 Y	[1]	PUMP GP-PISTON (IMPLEMENT)
2.	138-4816 Y	[1]	PUMP GP-PISTON (IMPLEMENT)
3.	7X-2563 M	[4]	BOLT (M20X2.5X60-MM)
4.	095-0821	[4]	LOCKWASHER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP22250743

138-4816: PUMP GP-PISTON

PUMP GP-PISTON

138-4816 PUMP GP-PISTON
S/N 5ZL106-UP
PART OF 138-4815 PUMP GP-PISTON

i00611378 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7951	[1]	DOWEL
2.	4I-7692	[1]	HOUSING
3.	9X-8482 M	[1]	SETSCREW-SOCKET (M12X1.75X70-MM)
4.	6E-3283 M	[2]	LOCKNUT (M12X1.75-THD)
5.	9S-9334	[1]	PLUG (1-5/16-12-THD)
6.	4I-7693 Y	[1]	ACTUATOR GP-PUMP (MAXIMUM ANGLE)
7.	107-6440 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(IMPL PUMP REGULATOR CONTROL)
8.	6E-1030	[1]	SEAL-DISC
9.	7X-2910	[1]	RING-RETAINING
10.	4I-7695 Y	[1]	COVER GP-PUMP (IMPLEMENT)
11.	096-8058	[2]	RING-RETAINING
12.	6E-3336 B	[1]	SHIM (1-MM THK)
13.	105-5028	[1]	IMPELLER
14.	6E-3333	[1]	KEY
15.	105-5022 Y	[1]	HEAD GP-PUMP (IMPLEMENT)
16.	6E-1026 Y	[1]	ACTUATOR GP-PUMP (MINIMUM ANGLE)
17.	138-9217 Y	[1]	ROTATING GP-PUMP (IMPLEMENT)
18.	9X-8483 M	[1]	SETSCREW-SOCKET (M12X1.75X80-MM)
19.	9X-6153 M	[1]	BOLT (M6X1X10-MM)
20.	6E-3334 B	[1]	SHIM (0.1-MM THK)
21.	6E-3335 B	[1]	SHIM (0.2-MM THK)
22.	7M-8485	[1]	SEAL-O-RING
23.	138-6779 Y	[1]	VALVE GP-SHUTTLE (RESOLVER)
24.	128-8981	[2]	CAP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250744

138-4817: PUMP GP-PISTON

PUMP GP-PISTON

138-4817 PUMP GP-PISTON
S/N 5ZL106-UP
PART OF 138-4815 PUMP GP-PISTON

i00609647 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7951	[1]	DOWEL
2.	6E-1027	[1]	HOUSING
3.	9X-8482 M	[1]	SETSCREW-SOCKET (M12X1.75X70-MM)
4.	6E-3283 M	[2]	LOCKNUT (M12X1.75-THD)
5.	9S-9334	[1]	PLUG (1-5/16-12-THD)
6.	4I-7693 Y	[1]	ACTUATOR GP-PUMP (MAXIMUM ANGLE)
7.	107-6440 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(IMPL PUMP REGULATOR CONTROL)
8.	6E-1030	[1]	SEAL-DISC
9.	7X-2910	[1]	RING-RETAINING
10.	8T-6594 M	[4]	BOLT-SOCKET HEAD (M16X2X35-MM)
11.	7D-9014	[1]	SEAL-O-RING
12.	6E-1028	[1]	COVER
13.	096-8058	[2]	RING-RETAINING
14.	6E-3334 B	[1]	SHIM (0.1-MM THK)
15.	105-5028	[1]	IMPELLER
16.	6E-3333	[1]	KEY
17.	105-5022 Y	[1]	HEAD GP-PUMP (IMPLEMENT)
18.	6E-1026 Y	[1]	ACTUATOR GP-PUMP (MINIMUM ANGLE)
19.	138-9286 Y	[1]	ROTATING GP-PUMP (IMPLEMENT)
20.	9X-8483 M	[1]	SETSCREW-SOCKET (M12X1.75X80-MM)
21.	7M-8485	[1]	SEAL-O-RING
22.	6E-3335 B	[1]	SHIM (0.2-MM THK)
23.	6E-3336 B	[1]	SHIM (1-MM THK)
24.	138-6779 Y	[1]	VALVE GP-SHUTTLE (RESOLVER)
25.	128-8981	[2]	CAP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250745

138-4821: PUMP GP-PISTON

PUMP GP-PISTON

138-4821 PUMP GP-PISTON
S/N 5ZL106-UP
PART OF 106-5132 PUMP & MTG GP-SWING

i00615910 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6419	[1]	DOWEL
2.	4I-7692	[1]	HOUSING
3.	9X-8482 M	[1]	SETSCREW-SOCKET (M12X1.75X70-MM)
4.	6E-3283 M	[2]	LOCKNUT (M12X1.75-THD)
5.	6E-1025 Y	[1]	ACTUATOR GP-PUMP (SWING)
6.	106-1434 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(SWING PUMP)
7.	6E-1030	[1]	SEAL-DISC
8.	7X-2910	[1]	RING-RETAINING
9.	106-2384 Y	[1]	COUPLING & MTG GP-PUMP (SWING)
10.	096-8058	[2]	RING-RETAINING
11.	6E-3336 B	[1]	SHIM (1-MM THK)
12.	105-5028	[1]	IMPELLER
13.	6E-3333	[1]	KEY
14.	105-5022 Y	[1]	HEAD GP-PUMP (SWING)
15.	114-2052 Y	[1]	ACTUATOR GP-PUMP (SWING)
16.	138-9217 Y	[1]	ROTATING GP-PUMP (SWING)
17.	9X-8483 M	[1]	SETSCREW-SOCKET (M12X1.75X80-MM)
18.	9X-6153 M	[1]	BOLT (M6X1X10-MM)
19.	6E-3334 B	[1]	SHIM (0.1-MM THK)
20.	6E-3335 B	[1]	SHIM (0.2-MM THK)
21.	112-4630	[1]	SCREW (1-5/16-THD)
22.	138-6779 Y	[1]	VALVE GP-SHUTTLE (SWING PUMP)
23.	128-8981	[2]	CAP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250746

6E-5477: PUMP GP-PISTON

PUMP GP-PISTON

6E-5477 PUMP GP-PISTON
S/N 5ZL48-UP
SLIPPER
PART OF 3Z-6031 GENERATOR GP-HYDRAULIC
AN ATTACHMENT

i00401631 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-2002	[1]	GASKET
2.	5F-9144	[1]	SEAL-O-RING
3.	7L-0688	[4]	BOLT-SOCKET HEAD (10-24X1.2-IN)
4.	101-0971 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
5.	9T-2172	[1]	PISTON
6.	9T-2170	[1]	ROD-PISTON
7.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
8.	2M-9780	[1]	SEAL-O-RING
9.	8F-9206	[1]	SEAL-O-RING
10.	9T-2003	[1]	RING
11.	9T-2000 B	[1]	KIT-SPACER
12.	9T-2232	[1]	PLATE-WAFER
13.	7T-9752	[1]	CONE-BEARING
14.	7T-9753	[1]	CUP-BEARING
15.	9T-1752	[1]	GASKET
16.	8T-5089	[2]	PIN-SPRING
17.	9T-2001	[1]	PIN
18.	9T-2176	[1]	HEAD-VALVE BLOCK
19.	100-4709	[1]	SHAFT-PUMP
20.	9T-3867	[1]	SPRING
21.	5P-0076	[6]	BOLT-12 POINT HEAD (3/8-16X1.5-IN)
22.	9T-2168	[1]	SPRING
23.	9T-2171	[1]	SEAT
24.	9T-2173	[1]	SEAT
25.	8J-8308	[1]	PIN-ROLL
26.	002-3455	[1]	RING-RETAINING
27.	3E-6748	[1]	SEAL-LIP TYPE
28.	101-7188	[1]	HOUSING-PUMP
29.	7T-9755	[1]	CUP-BEARING
30.	7T-9754	[1]	CONE-BEARING
31.	9T-2231	[1]	SWASHPLATE
32.	7T-9831	[2]	CONE-BEARING
33.	3P-8680	[2]	CUP-BEARING
34.	9T-2017	[2]	SPACER (12.2-MM THK)
35.	005-8593	[2]	SEAL-O-RING
36.	9T-2011 B	[1]	SHIM PACK
37.	9T-2014	[2]	COVER
38.	9S-2011	[8]	SCREW-MACHINE (1/4-20X0.5-IN)
39.	9F-2247	[1]	PLUG-PIPE
40.	9T-1636	[1]	SEAT
41.	9T-1710	[1]	POPPET
42.	9T-2031 Y	[1]	ROTATING GP-PUMP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP22250747

6E-6047: PUMP GP-PISTON

PUMP GP-PISTON

6E-6047 PUMP GP-PISTON
S/N 5ZL1-UP
PART OF 6I-7194 PUMP & MTG GP-PISTON
Type 1

i00090602 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-6594	[1]	BEARING-SWASH
2.	6E-4224	[1]	PLUG-SWASHPLATE
	033-6036	[1]	SEAL-O-RING
3.	100-8204	[1]	COUPLING-SHAFT
4.	100-8201	[1]	HEAD-PUMP
5.	9T-1699	[1]	SPRING
6.	9T-1710	[1]	POPPET
7.	9T-1636	[1]	SEAT
8.	6E-6596	[1]	COVER-TRUNNION
9.	6V-3834	[1]	SEAL-O-RING
10.	3E-4302 M	[2]	SCREW-FLAT HEAD (M4X0.7X10-MM)
11.	6V-8214 M	[3]	BOLT (M6X1X20-MM)
12.	6E-6597	[1]	BEARING-SWASH
13.	6V-8004 M	[2]	BOLT (M12X1.75X120-MM)
14.	8T-0372 M	[4]	BOLT (M12X1.75X90-MM)
15.	100-8205 Y	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
16.	8T-5039	[3]	SEAL-O-RING
17.	6V-8337 M	[4]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
18.	095-0888	[2]	PIN-SPRING
19.	100-8202	[1]	SHAFT-PUMP
20.	100-8203	[1]	HOUSING-PUMP
21.	006-8663	[1]	RING
22.	8T-4750	[1]	SEAL-LIP TYPE
23.	6E-6599	[1]	KIT-BIAS PISTON
			(INCL SPRING, ROD, PISTON & SEAL)
24.	6E-6600	[1]	SPRING-BIAS
25.	6E-6571 Y	[1]	ROTATING GP-PUMP
26.	6E-6601	[1]	GASKET
27.	7L-9061	[2]	SEAL-O-RING
28.	3E-7417	[2]	PLUG
29.	8T-7876	[2]	SEAL-O-RING
30.	9T-1633	[1]	PLATE
31.	9T-2197 B	[1]	SHIM PACK (INCLUDES 17-SHIMS)
			(INCLUDES 17 SHIMS)
32.	7T-8273	[1]	CUP-BEARING
	7T-8272	[1]	CONE-BEARING
33.	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
34.	9T-1652	[1]	PIN
35.	6E-6602	[1]	KIT-PISTON CONTROL
			(INCLUDES ROD,PISTON & SEAL)
36.	6E-6603	[1]	SWASHPLATE GP
	6E-4223	[2]	STOP
37.	1P-6872	[1]	CUP-BEARING
	004-9040	[1]	CONE-BEARING
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250748

6E-6047: PUMP GP-PISTON

PUMP GP-PISTON

6E-6047 PUMP GP-PISTON
S/N 5ZL1-UP
PART OF 6I-7194 PUMP & MTG GP-PISTON
Type 2

i00090603 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-6594	[1]	BEARING-SWASH
2.	6E-4224	[1]	PLUG-SWASHPLATE
	033-6036	[1]	SEAL-O-RING
3.	100-8204	[1]	COUPLING-SHAFT
4.	100-8201	[1]	HEAD-PUMP
5.	9T-1699	[1]	SPRING
6.	9T-1710	[1]	POPPET
7.	9T-1636	[1]	SEAT
8.	6E-6596	[1]	COVER-TRUNNION
9.	6V-3834	[1]	SEAL-O-RING
10.	3E-4302 M	[2]	SCREW-FLAT HEAD (M4X0.7X10-MM)
11.	6V-8214 M	[3]	BOLT (M6X1X20-MM)
12.	6E-6597	[1]	BEARING-SWASH
13.	6V-8004 M	[2]	BOLT (M12X1.75X120-MM)
14.	8T-0372 M	[4]	BOLT (M12X1.75X90-MM)
15.	110-6951 CY	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)
16.	8T-5039	[3]	SEAL-O-RING
17.	6V-8337 M	[4]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
18.	095-0888	[2]	PIN-SPRING
19.	100-8202	[1]	SHAFT-PUMP
20.	100-8203	[1]	HOUSING-PUMP
21.	006-8663	[1]	RING
22.	8T-4750	[1]	SEAL-LIP TYPE
23.	6E-6599	[1]	KIT-BIAS PISTON
			(INCLUDES SPRING, ROD, PISTON & SEAL)
24.	6E-6600	[1]	SPRING-BIAS
25.	6E-6571 Y	[1]	ROTATING GP-PUMP
26.	6E-6601	[1]	GASKET
27.	7L-9061	[2]	SEAL-O-RING
28.	3E-7417	[2]	PLUG
29.	8T-7876	[2]	SEAL-O-RING
30.	9T-1633	[1]	PLATE
31.	9T-2197 B	[1]	SHIM PACK (INCLUDES 17-SHIMS)
			(INCLUDES 17 SHIMS)
32.	7T-8273	[1]	CUP-BEARING
	7T-8272	[1]	CONE-BEARING
33.	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
34.	9T-1652	[1]	PIN
35.	6E-6602	[1]	KIT-PISTON CONTROL
			(INCLUDES ROD, PISTON & SEAL)
36.	6E-6603	[1]	SWASHPLATE GP
	6E-4223	[2]	STOP
37.	1P-6872	[1]	CUP-BEARING
	004-9040	[1]	CONE-BEARING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP22250749

6E-6047: PUMP GP-PISTON

PUMP GP-PISTON

6E-6047 PUMP GP-PISTON
S/N 5ZL1-UP
PART OF 6I-7194 PUMP & MTG GP-PISTON
Type 3

i00090604 SEBP2225

For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6E-6594	[1]	BEARING-SWASH
2.	6E-4224	[1]	PLUG-SWASHPLATE
	033-6036	[1]	SEAL-O-RING
3.	100-8204	[1]	COUPLING-SHAFT
4.	100-8201	[1]	HEAD-PUMP
5.	9T-1699	[1]	SPRING
6.	9T-1710	[1]	POPPET
7.	9T-1636	[1]	SEAT
8.	6E-6596	[1]	COVER-TRUNNION
9.	6V-3834	[1]	SEAL-O-RING
10.	3E-4302 M	[2]	SCREW-FLAT HEAD (M4X0.7X10-MM)
11.	6V-8214 M	[3]	BOLT (M6X1X20-MM)
12.	6E-6597	[1]	BEARING-SWASH
13.	6V-8004 M	[2]	BOLT (M12X1.75X120-MM)
14.	8T-0372 M	[4]	BOLT (M12X1.75X90-MM)
15.	110-6952 CY	[1]	VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(RADIATOR COOLING PUMP)
16.	8T-5039	[3]	SEAL-O-RING
17.	6V-8337 M	[4]	BOLT-SOCKET HEAD (M8X1.25X35-MM)
18.	095-0888	[2]	PIN-SPRING
19.	100-8202	[1]	SHAFT-PUMP
20.	100-8203	[1]	HOUSING-PUMP
21.	006-8663	[1]	RING
22.	8T-4750	[1]	SEAL-LIP TYPE
23.	6E-6599	[1]	KIT-BIAS PISTON
			(INCLUDES SPRING, ROD, PISTON & SEAL)
24.	6E-6600	[1]	SPRING-BIAS
25.	6E-6571 Y	[1]	ROTATING GP-PUMP (RADIATOR COOLING)
26.	6E-6601	[1]	GASKET
27.	7L-9061	[2]	SEAL-O-RING
28.	3E-7417	[2]	PLUG
29.	8T-7876	[2]	SEAL-O-RING
30.	9T-1633	[1]	PLATE
31.	9T-2197 B	[1]	SHIM PACK (INCLUDES 17-SHIMS)
32.	7T-8273	[1]	CUP-BEARING
	7T-8272	[1]	CONE-BEARING
33.	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
34.	9T-1652	[1]	PIN
35.	6E-6602	[1]	KIT-PISTON CONTROL
			(INCLUDES ROD,PISTON & SEAL)
36.	6E-6603	[1]	SWASHPLATE GP
	139-0532	[2]	BLOCK-STOP
	8F-7219	[2]	SEAL-O-RING
37.	1P-6872	[1]	CUP-BEARING
	004-9040	[1]	CONE-BEARING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

PUMP GP

Special Instruction

Inspection Procedure for the 5130 and 5130B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Inspection Procedure for the 5130 and 5130B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Service Letter-NACD

Service Letter Cancellation
Service Letter Cancellation

Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators

A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Service Letter-Australia

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Service Letter-CFEL

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Service Letter-CSARL

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Service Letter-Americas

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Technical Information Bulletin

Initial Setup Dimensions For Minimum And Maximum Adjustment For Displacement Stop Screws In Piston Pump Groups
Initial Setup Dimensions For Minimum And Maximum Adjustment For Displacement Stop Screws In Piston Pump Groups

New Hydraulic Test And Adjust Procedure For Initial Destroking Pressure
New Hydraulic Test And Adjust Procedure For Initial Destroking Pressure

Specifications

Gear Pump (Pump Drive Lubrication)
5130 Excavator Hydraulic System

Gear Pump (Pilot)
5130 Excavator Hydraulic System

Piston Pump (Hydraulic Cooling)
5130 Excavator Hydraulic System

Piston Pump (Radiator Cooling)
5130 Excavator Hydraulic System

Piston Pump (Swing)
5130 Excavator Hydraulic System

Piston Pump (Implement)
5130 Excavator Hydraulic System

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Service Letter-China

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Service Letter-Asia

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Systems Operation

Gear Pump (Pilot)
5130 Excavator Hydraulic System

Piston Pump (Implement)
5130 Excavator Hydraulic System

Piston Pump (Swing)
5130 Excavator Hydraulic System

Piston Pump (Hydraulic and Radiator Cooling)
5130 Excavator Hydraulic System

Gear Pump (Pump Drive Lubrication)
5130 Excavator Hydraulic System

Reuse And Salvage Guidelines

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Service Letter-APD

Service Letter Cancellation
Service Letter Cancellation

The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators

Testing and Adjusting

Piston Pump (Hydraulic Cooling) - Test and Adjust
5130 Excavator Hydraulic System

Piston Pump (Implement) - Test and Adjust
5130 Excavator Hydraulic System

Piston Pump (Radiator Cooling) - Test and Adjust
5130 Excavator Hydraulic System

Piston Pump (Swing) - Test and Adjust
5130 Excavator Hydraulic System

M1 Port Pressure - Check
5130 Excavator Hydraulic System

Minimum Angle Servo - Inspect
5130 Excavator Hydraulic System

Bench Test Procedures

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}

Disassembly and Assembly

Main Hydraulic Pumps (Implement)
5130 EXCAVATOR MACHINE SYSTEMS

Pilot System Pump
5130 EXCAVATOR MACHINE SYSTEMS

Hydraulic Oil Cooler Fan Drive Pump
5130 EXCAVATOR MACHINE SYSTEMS

Swing Pump
5130 EXCAVATOR MACHINE SYSTEMS

Engine Coolant Fan Drive Pump
5130 EXCAVATOR MACHINE SYSTEMS

Pump Drive Lubrication Pump
5130 EXCAVATOR MACHINE SYSTEMS

Service Magazine

Improved Clamps Now Used To Improve Tube Assembly Service Life In Pump Lines Group{5057}
1995/06/26

New Adapter (Orifice) Used In Hydraulic Pump Case Drain To Eliminate Pressure Spikes{5084,5070}
1995/07/24

Bleed Ports Added To Hydraulic Implement And Swing Pumps {5070,5473,5057}
1995/10/02

Serviceable Parts For Implement Pump Group Are Now Available{5070}
1995/10/16

New Dipsticks Are Used In Swing Drives, Pump Drives and Final Drives For Easier Visual Inspection{7560,5459,4050,3108}
1995/10/16

New Radiator Fan Pump Pressure Compensator Valve Used {1387,5070,5086}
1995/11/13

Improved Support Bracket With Wider Contact Area Used To Improve Hydraulic Tank Suction Tubes Service Life{5057}
1996/06/03

New Grooved Piston Assemblies Available For Piston Pump Rotating Groups {5070}
1996/08/12

New Piston Pumps With Improved Barrels, Better Pressure Balance Between The Port Plate And Barrel, And New "G" Port Valve Used For Implement And Swing Systems {5070,5084,5473}
1997/03/24

High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24

New Pump Supply Tube Assembly And Hose Assembly Used For Hydraulic Excavator For Improved Service Life {5057}
1997/03/31

New Procedure To Adjust Margin Pressure For Implement Pump Groups {5070,5084,5086}
1997/05/12

Margin Pressure Adjustment During Machine Assembly/Commissioning And After New Pump Installation {5070,5084,5086}
1997/06/16

Unique Seal Included In 121-3300 Plug On Pump Drive Group Of 5130/5230 Excavators {3108}
1997/06/30

New Control Valve Group For Implement Pump Groups{5051,5070,5084}
1997/09/08

Margin Pressure Adjustment During Machine Assembly/Commissioning And After New Pump Installation{5070,5084,5086}
1997/09/08

New Actuator Rods For Piston Pump Group{5070,5080}
1998/02/23

A New Switch Used In High Pressure Screens Of Discharge Lines From Hydraulic Pumps Is Resistant To Internal Leakage Of Hydraulic Oil {5050}
1998/05/11

Preload Adjustment Changed For Shaft Bearings And Barrel Face In Piston Motors {5058}
1998/06/01

New Chip Detector Used To Increase Reliability {5084,5473}
1998/08/24

New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups {1312}
1998/09/28

The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

A New Pump Control Valve Group is Available {5455}
2006/04/17

An Improved Inspection Checklist Has Been Added to the Inspection Procedures for Certain Excavators {1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
2010/12/24

Caterpillar Parts SIS Catalog 5130 :

133-3555 PUMP GP-PISTON

133-3554 PUMP GP-PISTON

124-9962 PUMP GP-PISTON

106-4309 PUMP GP-PISTON

106-4308 PUMP GP-PISTON

105-5020 PUMP GP-PISTON

105-5017 PUMP GP-PISTON

9T-0436 PUMP GP-GEAR

133-3557 PUMP GP-PISTON

138-4815 PUMP GP-PISTON

138-4816 PUMP GP-PISTON

138-4817 PUMP GP-PISTON

138-4821 PUMP GP-PISTON

6E-5477 PUMP GP-PISTON

6E-6047 PUMP GP-PISTON

Truck sale:

USD $84,425

1996 CAT 5130

Empire Machinery
Eloy, Arizona

Call

1995 CAT 5130

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea

Call

2008 CAT 5130

Winwin Used Machinery
Seoul, KOREA, South Korea

$148,500 USD

CATERPILLAR 5130 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States

USD $235,900

1995 CAT 5130

American Empire Equipment
NORTHVILLE, Michigan