AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

138-9286 ROTATING GP-PUMP S/N 5ZL106-UP PART OF 138-4817 PUMP GP-PISTON 5130 MINING EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
FILTER GP
MOTOR GP
SWIVEL GP

MINING EXCAVATOR 5130 MINING EXCAVATOR 5ZL
 5130 Excavator 5ZL00001-UP (MACHINE) POWERED BY 3508 Engine SEBP2225 5130 5ZL   (1992)

HYDRAULIC SYSTEM

PUMP GP
ROTATING GP-PUMP
105-5174 ROTATING GP-PUMP
ROTATING GP-PUMP
138-9217 ROTATING GP-PUMP
ROTATING GP-PUMP
138-9286 ROTATING GP-PUMP
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
100-8205 VALVE GP-PUMP CONTROL
 

#SEBP22250760
 

138-9286: ROTATING GP-PUMP

138-9286 ROTATING GP-PUMP
S/N 5ZL106-UP
PART OF 138-4817 PUMP GP-PISTON
i00609608 SEBP2225
1389286 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 295-9231 [1] COVER  
2. 6E-3337 [1] SEAL-SHAFT  
3. 102-0743 [1] SWASHPLATE  
4. 6E-3845 [1] PLATE-RETAINING  
5. 6E-3846 [1] RETAINER-BALL  
6. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
7. 6E-3840 [2] ROD  
8. 5H-3252 [1] SEAL-O-RING  
9. 105-5173 [1] FLANGE  
10. 6E-1033 [1] SPRING SET-CUP  
11. 6E-3841 B [1] SHIM (1.2-MM THK)  
13. 105-5172 [1] SHAFT-DRIVE  
14. 138-9219 [1] BARREL AS  
15. 6E-3847 [2] RETAINER-SEGMENT  
16. 095-7948 [1] RING-RETAINING  
17. 102-0746 [1] BEARING AS  
18. 102-0740 [1] BEARING  
19. 5F-3999 [1] SEAL-O-RING  
20. 6I-6788 [1] RING-RETAINING  
21. 6E-1574 [2] PIN  
22. 9X-6420 [2] PIN-SPRING  
23. 6E-3842 B [1] SHIM (1-MM THK)  
24. 6E-3843 B [1] SHIM (0.8-MM THK)  
25. 6E-3844 B [1] SHIM (0.6-MM THK)  
26. 111-9913 [1] PISTON AS  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22250761
 

6E-6571: ROTATING GP-PUMP

6E-6571 ROTATING GP-PUMP
S/N 5ZL1-UP
PART OF 124-9962, 6E-6047, 6E-6048 PUMP GP-PISTON
ALSO AN ATTACHMENT
i00090611 SEBP2225
6E6571 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6604 [2] PLATE-SPACER  
2. 6E-6605 [2] PLATE-LIMITER  
3. 3T-0849 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 9T-7755 [1] SPRING  
5. 009-2069 [1] RING  
6. 9T-7754 [1] GUIDE-OUTER  
7. 9T-7757 [1] BARREL  
8. 9T-7756 [1] GUIDE-INNER  
9. 9T-7759 [1] PLATE-RETAINING  
10. 9T-7761 [9] PISTON  
  M   METRIC PART
 

#SEBP22250762
 

9T-2031: ROTATING GP-PUMP

9T-2031 ROTATING GP-PUMP
S/N 5ZL48-UP
PART OF 6E-5477 PUMP GP-PISTON
AN ATTACHMENT
i00169354 SEBP2225
9T2031 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3868 [1] KIT-PISTON (PUMP ROTATING GROUP)  
    (INCLUDES PISTONS)
2. 9T-3860 [1] PLATE  
3. 9T-3859 [1] WASHER (1.068X1.139X0.099-MM THK)  
4. 9T-3862 [1] RETAINER  
5. 9T-3857 [3] PIN  
6. 9T-3863 [1] BARREL  
7. 9T-3861 [1] WASHER (1.062X1.58X0.095-MM THK)  
8. 9T-3858 [1] SPRING  
9. 9T-3864 [1] WASHER (1.2X1.58X0.095-MM THK)  
10. 004-1683 [1] RING-SNAP  
 

#SEBP22250763
 

100-5428: SCREEN GP-HYDRAULIC

100-5428 SCREEN GP-HYDRAULIC
S/N 5ZL1-UP
PART OF 6I-7458 FILTER & MTG GP-OIL
i00090825 SEBP2225
1005428 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3895 [2] SCREEN AS-HIGH PRESSURE (HYDRAULIC)  
2. 5P-6302 [2] SEAL-O-RING  
3. 104-4310 [2] SEAL-O-RING  
4. 104-3898 [2] SOCKET AS  
5. 104-3897 [2] SWITCH AS (DIFFERENTIAL PRESSURE)  
6. 3E-4288 [4] SEAL-O-RING  
7. 112-2936 [2] PLUG  
8. 112-2941 [2] SEAL  
 

#SEBP22250764
 

100-5429: SCREEN GP-HYDRAULIC

100-5429 SCREEN GP-HYDRAULIC
S/N 5ZL1-UP
PART OF 6I-7458 FILTER & MTG GP-OIL
i00090826 SEBP2225
1005429 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-4310 [1] SEAL-O-RING  
2. 104-3895 [1] SCREEN AS-HIGH PRESSURE (HYDRAULIC)  
3. 104-3897 [1] SWITCH AS (DIFFERENTIAL PRESSURE)  
4. 3E-4288 [2] SEAL-O-RING  
5. 5P-6302 [1] SEAL-O-RING  
6. 104-3898 [1] SOCKET AS  
7. 112-2940 [1] PLUG  
8. 112-2942 [1] SEAL  
 

#SEBP22250765
 

112-2943: SCREEN GP-HYDRAULIC

112-2943 SCREEN GP-HYDRAULIC
S/N 5ZL1-UP
PART OF 6I-7458 FILTER & MTG GP-OIL
i00090234 SEBP2225
1122943 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3895 [2] SCREEN AS-HIGH PRESSURE (HYDRAULIC)(HYDRAULIC HIGH PRESSURE)  
2. 5P-6302 [2] SEAL-O-RING  
3. 104-4310 [2] SEAL-O-RING  
5. 159-0749 [2] SWITCH AS (DIFFERENTIAL PRESSURE)  
    (EACH INCLUDES)
  104-3898 [1] SOCKET AS  
  158-6157 [1] PLUG AS  
  095-1581 [1] SEAL-O-RING  
6. 3E-4288 [4] SEAL-O-RING  
7. 197-0027 [2] PLUG  
8. 3K-0360 [2] SEAL-O-RING  
9. 112-9118 M [8] BOLT-SOCKET HEAD (M4X0.7X30-MM)  
10. 115-9429 [2] HOUSING AS  
11. 118-8310 [2] SEAL  
  M   METRIC PART
 

#SEBP22250766
 

112-2944: SCREEN GP-HYDRAULIC

112-2944 SCREEN GP-HYDRAULIC
S/N 5ZL1-UP
PART OF 6I-7458 FILTER & MTG GP-OIL
i00090235 SEBP2225
1122944 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-4310 [1] SEAL-O-RING  
2. 104-3895 [1] SCREEN AS-HIGH PRESSURE (HYDRAULIC)(IMPLEMENT & STEERING OIL)  
3. 159-0749 [1] SWITCH AS (DIFFERENTIAL PRESSURE)  
3A. 104-3898 [1] SOCKET AS  
3B. 158-6157 [1] PLUG AS  
3C. 095-1581 [1] SEAL-O-RING  
4. 3E-4288 [2] SEAL-O-RING  
5. 5P-6302 [1] SEAL-O-RING (RUBBER)  
7. 9S-4181 [1] PLUG (1-5/16-12-THD)  
8. 7M-8485 [1] SEAL-O-RING  
9. 121-7708 [1] PLUG AS  
10. 3K-0360 [1] SEAL-O-RING  
11. 113-0920 M [4] BOLT-SOCKET HEAD (M4X0.7X35-MM)  
12. 115-9429 [1] HOUSING AS  
13. 118-8310 [1] SEAL (PLASTIC)  
  M   METRIC PART
 

#SEBP22250767
 

9T-2282: SHAFT GP-HYDRAULIC MOTOR

9T-2282 SHAFT GP-HYDRAULIC MOTOR
S/N 5ZL1-UP
PART OF 9T-2010 ROTATING GP-MOTOR
i00090803 SEBP2225
9T2282 SHAFT GP-HYDRAULIC MOTOR Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1326 [1] SHAFT  
2. 9T-2004 [1] LOCKNUT-BEARING  
3. 9T-1638 [1] RING-BEARING  
4. 9W-2107 [1] CONE-BEARING  
5. 9W-2108 [1] CUP-BEARING  
6. 9W-2103 [1] CONE-BEARING  
7. 9W-2104 [1] CUP-BEARING  
 

#SEBP22250768
 

130-5129: SWIVEL GP

130-5129 SWIVEL GP
S/N 5ZL73-UP
PART OF 106-3626 CHASSIS AR
i00091267 SEBP2225
1305129 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6264 [1] COVER  
2. 6E-6262 [1] HOUSING  
3. 6E-6263 [1] ROTOR  
4. 7Y-4842 [8] SEAL  
5. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
6. 095-1728 [2] SEAL-O-RING  
7. 8T-6685 M [6] BOLT (M10X1.5X110-MM)  
8. 130-3367 [1] RETAINER  
9. 137-3894 B [5] SHIM (0.5-MM THK)  
10. 130-4738 [2] RACE-THRUST BEARING  
11. 114-5207 [1] SEAL AS  
12. 130-3368 [1] RETAINER  
13. 130-3369 [1] SPACER  
14. 9D-8042 [1] SEAL-O-RING  
15. 130-4737 [1] BEARING AS-NEEDLE  
16. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22250769
 

6E-6261: SWIVEL GP

6E-6261 SWIVEL GP
S/N 5ZL1-72
PART OF 106-3626 CHASSIS AR
i00090608 SEBP2225
6E6261 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 5130 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [6] BOLT (M10X1.5X35-MM)  
2. 3E-8004 M [3] BOLT (M12X1.75X45-MM)  
3. 095-1728 [1] SEAL-O-RING  
4. 116-4195 [1] RETAINER  
5. 7Y-4842 [8] SEAL  
6. 6E-6264 [1] COVER  
7. 6E-6262 [1] HOUSING  
8. 6E-6263 [1] ROTOR  
9. 114-5207 [1] SEAL AS  
  M   METRIC PART
 

Information:

Special Instruction
Inspection Procedure for the 5130 and 5130B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Inspection Procedure for the 5130 and 5130B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Service Letter-NACD
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Service Letter-Australia
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Service Letter-CFEL
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Service Letter-CSARL
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Service Letter-Americas
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Technical Information Bulletin
Initial Setup Dimensions For Minimum And Maximum Adjustment For Displacement Stop Screws In Piston Pump Groups
Initial Setup Dimensions For Minimum And Maximum Adjustment For Displacement Stop Screws In Piston Pump Groups
New Hydraulic Test And Adjust Procedure For Initial Destroking Pressure
New Hydraulic Test And Adjust Procedure For Initial Destroking Pressure
Specifications
Gear Pump (Pump Drive Lubrication)
5130 Excavator Hydraulic System
Gear Pump (Pilot)
5130 Excavator Hydraulic System
Gear Pump (Pilot)
5130 Excavator Hydraulic System
Piston Pump (Hydraulic Cooling)
5130 Excavator Hydraulic System
Piston Pump (Radiator Cooling)
5130 Excavator Hydraulic System
Piston Pump (Swing)
5130 Excavator Hydraulic System
Piston Pump (Swing)
5130 Excavator Hydraulic System
Piston Pump (Swing)
5130 Excavator Hydraulic System
Piston Pump (Implement)
5130 Excavator Hydraulic System
Piston Pump (Implement)
5130 Excavator Hydraulic System
Piston Pump (Implement)
5130 Excavator Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Service Letter-Asia
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Systems Operation
Gear Pump (Pilot)
5130 Excavator Hydraulic System
Piston Pump (Implement)
5130 Excavator Hydraulic System
Piston Pump (Swing)
5130 Excavator Hydraulic System
Piston Pump (Swing)
5130 Excavator Hydraulic System
Piston Pump (Hydraulic and Radiator Cooling)
5130 Excavator Hydraulic System
Gear Pump (Pump Drive Lubrication)
5130 Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
Service Letter Cancellation
Service Letter Cancellation
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
Product Support Program For Updating The Swivel On The Plates And Bolts To Prevent Leaking On Certain 5130 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
A New Screen Assembly Needs To Be Installed In The Pump Drive Lubrication System To Prevent Debris From Blocking The Orifice On Certain 5130 And 5230 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
The G-Port Valve Groups Need To Be Replaced On Certain 5130 Excavators
Testing and Adjusting
Piston Pump (Hydraulic Cooling) - Test and Adjust
5130 Excavator Hydraulic System
Piston Pump (Implement) - Test and Adjust
5130 Excavator Hydraulic System
Piston Pump (Radiator Cooling) - Test and Adjust
5130 Excavator Hydraulic System
Piston Pump (Swing) - Test and Adjust
5130 Excavator Hydraulic System
M1 Port Pressure - Check
5130 Excavator Hydraulic System
Minimum Angle Servo - Inspect
5130 Excavator Hydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Main Hydraulic Pumps (Implement)
5130 EXCAVATOR MACHINE SYSTEMS
Pilot System Pump
5130 EXCAVATOR MACHINE SYSTEMS
Hydraulic Oil Cooler Fan Drive Pump
5130 EXCAVATOR MACHINE SYSTEMS
Swing Pump
5130 EXCAVATOR MACHINE SYSTEMS
Engine Coolant Fan Drive Pump
5130 EXCAVATOR MACHINE SYSTEMS
Pump Drive Lubrication Pump
5130 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Improved Clamps Now Used To Improve Tube Assembly Service Life In Pump Lines Group{5057}
1995/06/26
New Adapter (Orifice) Used In Hydraulic Pump Case Drain To Eliminate Pressure Spikes{5084,5070}
1995/07/24
Bleed Ports Added To Hydraulic Implement And Swing Pumps {5070,5473,5057}
1995/10/02
Serviceable Parts For Implement Pump Group Are Now Available{5070}
1995/10/16
New Dipsticks Are Used In Swing Drives, Pump Drives and Final Drives For Easier Visual Inspection{7560,5459,4050,3108}
1995/10/16
New Radiator Fan Pump Pressure Compensator Valve Used {1387,5070,5086}
1995/11/13
Improved Support Bracket With Wider Contact Area Used To Improve Hydraulic Tank Suction Tubes Service Life{5057}
1996/06/03
New Grooved Piston Assemblies Available For Piston Pump Rotating Groups {5070}
1996/08/12
New Piston Pumps With Improved Barrels, Better Pressure Balance Between The Port Plate And Barrel, And New "G" Port Valve Used For Implement And Swing Systems {5070,5084,5473}
1997/03/24
High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24
New Pump Supply Tube Assembly And Hose Assembly Used For Hydraulic Excavator For Improved Service Life {5057}
1997/03/31
New Procedure To Adjust Margin Pressure For Implement Pump Groups {5070,5084,5086}
1997/05/12
Margin Pressure Adjustment During Machine Assembly/Commissioning And After New Pump Installation {5070,5084,5086}
1997/06/16
Unique Seal Included In 121-3300 Plug On Pump Drive Group Of 5130/5230 Excavators {3108}
1997/06/30
New Control Valve Group For Implement Pump Groups{5051,5070,5084}
1997/09/08
Margin Pressure Adjustment During Machine Assembly/Commissioning And After New Pump Installation{5070,5084,5086}
1997/09/08
New Actuator Rods For Piston Pump Group{5070,5080}
1998/02/23
A New Switch Used In High Pressure Screens Of Discharge Lines From Hydraulic Pumps Is Resistant To Internal Leakage Of Hydraulic Oil {5050}
1998/05/11
Preload Adjustment Changed For Shaft Bearings And Barrel Face In Piston Motors {5058}
1998/06/01
New Chip Detector Used To Increase Reliability {5084,5473}
1998/08/24
New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups {1312}
1998/09/28
The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
A New Pump Control Valve Group is Available {5455}
2006/04/17
An Improved Inspection Checklist Has Been Added to the Inspection Procedures for Certain Excavators {1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
2010/12/24

Caterpillar Parts SIS Catalog 5130 :

ROTATING GP-PUMP
138-9217 ROTATING GP-PUMP
ROTATING GP-PUMP
105-5174 ROTATING GP-PUMP
ROTATING GP-PUMP
105-5021 ROTATING GP-PUMP
ROTATING GP-MOTOR
9T-2010 ROTATING GP-MOTOR
ROTATING GP-MOTOR
178-4005 ROTATING GP-MOTOR
ROTATING GP-MOTOR
122-9402 ROTATING GP-MOTOR
ROTATING GP-MOTOR
106-2429 ROTATING GP-MOTOR
ROTATING GP-MOTOR
106-1255 ROTATING GP-MOTOR
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP
SCREEN GP-HYDRAULIC
100-5428 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
100-5429 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
112-2943 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
112-2944 SCREEN GP-HYDRAULIC
SHAFT GP-HYDRAULIC MOTOR
9T-2282 SHAFT GP-HYDRAULIC MOTOR
SWIVEL GP
130-5129 SWIVEL GP

Truck sale:

1996 CAT 5130
USD $84,425 
1996 CAT 5130

Empire Machinery
Eloy, Arizona
1995 CAT 5130
Call 
1995 CAT 5130

FAIZ BROTHERS CO. LTD.
SEOUL, South Korea
2008 CAT 5130
Call 
2008 CAT 5130

Winwin Used Machinery
Seoul, KOREA, South Korea
CATERPILLAR 5130 1996
$148,500 USD 
CATERPILLAR 5130 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
1995 CAT 5130
USD $235,900 
1995 CAT 5130

American Empire Equipment
NORTHVILLE, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.