AVSPARE.COM
parts catalog

4P-6571 CYLINDER HEAD AS PART OF 122-8851, 4P-8300 CYLINDER HEAD AS, 4P-6570 CYLINDER HEAD GP FIELD REPLACEMENT ORDER @@@@@ 4P-8300@@@@@ G3508




BASIC ENGINE

CYLINDER HEAD GP
 

#SEBP22310060
 

4P-6571: CYLINDER HEAD AS

4P-6571 CYLINDER HEAD AS
PART OF 122-8851, 4P-8300 CYLINDER HEAD AS, 4P-6570 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 4P-8300@@@@@
i00384609 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [5] PLUG-CUP  
2. 9S-8002 [2] PLUG (7/16-20-THD)  
3. 3J-7354 [2] SEAL-O-RING  
4. 3B-0645 [5] PLUG-CUP  
5. 6I-1713 [4] INSERT-VALVE SEAT  
6. 4P-6925 [1] SLEEVE-OIL  
 

#SEBP22310061
 

4P-8300: CYLINDER HEAD AS

4P-8300 CYLINDER HEAD AS
S/N 9TG1-32; 9TG40-UP
FIELD REPLACEMENT FOR @@@@@ 4P-6571@@@@@, 4P-6572 CYLINDER HEAD
i00371422 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-6571 Y [1] CYLINDER HEAD AS  
2. 9Y-1846 [2] GUIDE-VALVE (EXHAUST)  
3. 7N-1902 [2] DOWEL  
4. 9Y-1847 [2] GUIDE-VALVE (INTAKE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310062
 

123-8649: CYLINDER HEAD GP

123-8649 CYLINDER HEAD GP
S/N 9TG33-39
i00515594 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 [1] PLUG-PIPE  
2. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
3. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
4. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
5. 110-6991 [1] GASKET-CYLINDER HEAD  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 123-8650 Y [1] CYLINDER HEAD GP  
8. 126-1112 [4] SEAL  
9. 126-1113 [4] SEAL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310063
 

123-8650: CYLINDER HEAD GP

123-8650 CYLINDER HEAD GP
S/N 9TG33-39
PART OF 123-8649 CYLINDER HEAD GP
i00515602 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-8851 Y [1] CYLINDER HEAD AS  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 2W-2662 [4] SEAT-SPRING  
4. 7N-1904 [4] SPRING-VALVE OUTER  
5. 133-3814 [4] ROTOCOIL AS  
6. 2A-4429 [8] LOCK-RETAINER  
7. 104-7184 [4] VALVE  
8. 7N-1902 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310064
 

206-1555: CYLINDER HEAD GP

206-1555 CYLINDER HEAD GP
S/N 9TG302-UP
PART OF 206-1556 CYLINDER HEAD GP
i02212546 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [5] PLUG-CUP  
2. 3B-0645 [5] PLUG-CUP  
3. 214-7566 [2] SEAL-O-RING  
5. 4P-6925 [1] SLEEVE-OIL  
6. 191-6760 [2] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  206-1546 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  206-1547 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  322-3658 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
7. 257-9166 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  257-9168 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  257-9169 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  311-4018 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
8. 9S-8002 [2] PLUG (7/16-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP22310065
 

206-1556: CYLINDER HEAD GP

206-1556 CYLINDER HEAD GP
S/N 9TG302-389
PART OF 206-1558 CYLINDER HEAD GP
i01981597 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1903 [4] SPRING-VALVE INNER  
2. 209-0962 [4] WASHER (17.8X45X7.29-MM THK)  
3. 7N-1904 [4] SPRING-VALVE OUTER  
4. 197-6999 [4] ROTOCOIL AS  
5. 2A-4429 [8] LOCK-RETAINER  
6. 104-7184 [2] VALVE (INLET)  
6A. 104-7184 [2] VALVE (EXHAUST)  
7. 7N-1902 [2] DOWEL  
8. 191-6766 [2] GUIDE-VALVE (INLET)(STANDARD)  
  206-1544 AB GUIDE-VALVE (0.25-MM OS, INLET)  
  206-1545 AB GUIDE-VALVE (0.508-MM OS, INLET)  
9. 206-1541 [2] GUIDE-VALVE (EXHAUST)(STANDARD)  
  206-1542 AB GUIDE-VALVE (0.25-MM OS, EXHAUST)  
  206-1543 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
10. 206-1555 Y [1] CYLINDER HEAD GP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310066
 

206-1556: CYLINDER HEAD GP

206-1556 CYLINDER HEAD GP
S/N 9TG390-UP
PART OF 206-1558 CYLINDER HEAD GP
Type 1
i02195606 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1903 [4] SPRING-VALVE INNER  
2. 209-0962 [4] WASHER (17.8X45X7.29-MM THK)  
3. 7N-1904 [4] SPRING-VALVE OUTER  
4. 197-6999 [4] ROTOCOIL AS  
5. 2A-4429 [8] LOCK-RETAINER  
6. 210-2542 C [2] VALVE-INLET  
7. 7N-1902 [2] DOWEL  
8. 191-6766 [2] GUIDE-VALVE (INLET)(STANDARD)  
  206-1544 AB GUIDE-VALVE (0.25-MM OS, INLET)  
  206-1545 AB GUIDE-VALVE (0.508-MM OS, INLET)  
9. 206-1541 [2] GUIDE-VALVE (EXHAUST)(STANDARD)  
  206-1542 AB GUIDE-VALVE (0.25-MM OS, EXHAUST)  
  206-1543 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
10. 206-1555 Y [1] CYLINDER HEAD GP  
11. 104-7184 [2] VALVE (EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310067
 

206-1556: CYLINDER HEAD GP

206-1556 CYLINDER HEAD GP
S/N 9TG390-UP
PART OF 206-1558 CYLINDER HEAD GP
Type 2
i02249894 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [8] LOCK-RETAINER  
2. 7N-1903 [4] SPRING-VALVE INNER  
3. 7N-1904 [4] SPRING-VALVE OUTER  
4. 500-8527 [2] VALVE-EXHAUST  
5. 191-6766 [2] GUIDE-VALVE (INLET)(STANDARD)  
  206-1544 AB GUIDE-VALVE (0.25-MM OS, INLET)  
  206-1545 AB GUIDE-VALVE (0.508-MM OS, INLET)  
6. 197-6999 [4] ROTOCOIL AS  
7. 206-1555 CY [1] CYLINDER HEAD GP  
8. 209-0962 [4] WASHER (17.8X45X7.29-MM THK)  
9. 468-8824 [2] VALVE-INLET  
10. 255-0897 C [2] GUIDE-VALVE (EXHAUST)(STANDARD)  
  255-1261 AB GUIDE-VALVE (0.25-MM OS, EXHAUST)  
  255-1262 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
11. 7N-1902 C [2] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310068
 

206-1558: CYLINDER HEAD GP

206-1558 CYLINDER HEAD GP
S/N 9TG301-UP
i01909817 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
2. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
3. 5B-7890 [1] PLUG-PIPE  
4. 206-1556 Y [1] CYLINDER HEAD GP  
5. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 110-6991 [1] GASKET-CYLINDER HEAD  
8. 420-0653 [4] SEAL AS-WATER  
9. 420-0652 [4] SEAL AS-WATER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22310069
 

206-1560: CYLINDER HEAD GP

206-1560 CYLINDER HEAD GP
LOW SWIRL
PART OF 206-1561 CYLINDER HEAD GP
AN ATTACHMENT
i01719875 SEBP2231
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0623 [5] PLUG-CUP  
2. 3B-0645 [5] PLUG-CUP  
3. 214-7566 [2] SEAL-O-RING  
5. 4P-6925 [1] SLEEVE-OIL  
6. 191-6760 [2] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  206-1546 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  206-1547 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  322-3658 AB [1] INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
7. 266-8718 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  266-8719 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  266-8720 AB INSERT-VALVE SEAT (0.508-MM OS, INLET)  
8. 9S-8002 [2] PLUG (7/16-20-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Engine News
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Australia
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CFEL
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-CSARL
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Americas
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Brazil
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Service Letter-Truck/Ag/Marine
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Cylinder Head
G3500 Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Service Letter-Asia
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Systems Operation
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED G3500 CYLINDER HEADS
PRODUCT LINE ADDITIONS: REMANUFACTURED G3500 CYLINDER HEADS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Certain 0R3839 And 0R3840 Remanufactured Cylinder Heads Used For G3500 Engines Need To Be Inspected To Determine If A 4P6925 Oil Sleeve Has Been Installed In The Center Cam Follower Bore
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A New Riser Tube Flange To Cylinder Head Gasket On Certain G3508, G3512, And G3516 Engines
Testing and Adjusting
Disassembly and Assembly
Service Magazine

Caterpillar Parts SIS Catalog G3508 :

Truck sale:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.