4P-9571 BOX GP-CONTROL PANEL S/N 5JD20-UP PART OF 109-4692 WIRING GP-INSTR & IGNITION G3512 GAS ENGINE



OPERATOR STATION
PANEL GP
CONTROL GP-EMCP ELECTRONIC

GAS ENGINE G3512 GAS ENGINE 5JD
 G3512 Gas Engine Electronic Ignition System 5JD00001-UP SEBP2232 G3512 5JD   (1991)

OPERATOR STATION

PANEL GP
BOX GP-CONTROL PANEL
450-9621 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
4P-9571 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
4P-9571 BOX GP-CONTROL PANEL
BOX GP-INSTRUMENT PANEL
418-6662 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
418-6662 BOX GP-INSTRUMENT PANEL
CONTROL GP-ENGINE MONITORING
108-7871 CONTROL GP-ENGINE MONITORING
 

#SEBP22320850
 

4P-9571: BOX GP-CONTROL PANEL

4P-9571 BOX GP-CONTROL PANEL
S/N 5JD20-UP
PART OF 109-4692 WIRING GP-INSTR & IGNITION
i00540616 SEBP2232
4P9571 BOX GP-CONTROL PANEL Parts scheme 4P9571 BOX GP-CONTROL PANEL Parts scheme 4P9571 BOX GP-CONTROL PANEL Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 3E-0105 [2] MOUNT  
2. 3E-0356 [2] BLOCK-TERMINAL  
3. 3E-0357 [2] DIODE AS  
4. 3E-2286 C [1] STRIP-CONTACT  
5. 3E-5503 [2] BAR-FIXED BRIDGE  
6. 3E-8542 Y [1] CONTROL GP-ENGINE MONITORING  
7. 3N-6744 C [2] WASHER  
8. 3T-3048 [6] CLIP AS  
9. 4B-4278 [5] WASHER (10.2X20.5X1.6-MM THK)  
10. 4P-1539 [1] BUSHING-TERMINAL  
11. 4P-9572 [1] BOX-TERMINAL  
  9X-6442 E SEAL (267 CM)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
  9P-6895 [4] PIN  
  3B-5300 [4] PIN-COTTER  
12. 4S-5719 C [2] SPACER (10.31X25X12.7-MM THK)  
13. 7R-3029 [1] CAP-DUST  
14. 8L-8413 [3] STRAP-CABLE (WHITE)  
15. 9U-6461 [1] SCREWDRIVER  
16. 9X-9616 C [1] COVER-END  
17. 9X-9675 [4] BRACKET-END  
18. 104-3651 [1] LOCKNUT (1-11-1/2 NPT THD)  
19. 108-1701 C [1] KIT-MARKER  
20. 108-1702 C [50] TERMINAL  
21. 109-6507 C [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
22. 110-6170 C [1] BUSHING (CAPPED)  
23. 111-1323 C [1] BLOCK-CONTACT (1-POLE)  
24. 111-1324 C [1] BLOCK-CONTACT (1-POLE)  
25. 114-1143 C [1] CIRCUIT BREAKER AS (16-AMPERE)  
26. 115-1322 C [17] TERMINAL (DOUBLE)  
27. 115-2538 C [2] COVER-END  
28. 116-5137 C [1] SPACER (TERMINAL)  
29. 116-5140 C [8] TERMINAL  
30. 116-5142 C [3] TERMINAL (DOUBLE)  
31. 116-5193 [1] COVER-END  
32. 121-0816 [8] MOUNT-FLEXIBLE  
33. 123-5220 C [1] GASKET  
34. 123-5223 C [1] PLATE  
35. 131-4888 [1] GASKET  
36. 132-8487 [1] NUT-RING  
37. 202-7418 [1] FILM (CONTROL PANEL)  
38. 121-0817 [8] GASKET  
39. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
40. 2P-6896 [1] GASKET  
41. 3B-4501 C [34] LOCKWASHER  
42. 4P-7581 [5] CLIP (LADDER)  
43. 4P-8134 C [3] CLIP (LADDER)  
44. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 5S-4245 [4] SCREW-MACHINE (4-40X0.5-IN)  
46. 6D-5801 [16] LOCKNUT (8-32-THD)  
47. 6V-8801 [5] NUT (3/8-16-THD)  
48. 7S-1197 C [34] SCREW-MACHINE (8-32X0.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP22320851
 

418-6662: BOX GP-INSTRUMENT PANEL

418-6662 BOX GP-INSTRUMENT PANEL
OCP 4.3
Type 1
FIELD REPLACEMENT FOR @@@@@ 6V-6148@@@@@, @@@@@ 6V-6149@@@@@
AN ATTACHMENT
i05465164 SEBP2232
4186662 BOX GP-INSTRUMENT PANEL Parts scheme 4186662 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 1G-6660 [2] CONNECTOR-CORD  
2. 7C-3659 [1] STRIP-TERMINAL  
3. 7R-3029 [3] CAP-DUST  
4. 8T-5570 [6] SOCKET  
5. 087-0546 [1] RELAY (24-VOLT)(STARTING MOTOR)  
5A. 087-0546 [1] RELAY (24-VOLT)(FUEL CONTROL)  
5B. 087-0546 [1] RELAY (24-VOLT)(STARTING AID)  
5C. 087-0546 [1] RELAY (24-VOLT)(ENGINE STARTED)  
5D. 087-0546 [1] RELAY (24-VOLT)(ENGINE FAILURE)  
5E. 087-0546 [1] RELAY (24-VOLT)(ENGINE COOLDOWN)  
6. 103-6272 [1] SEAL  
7. 104-3649 [2] LOCKNUT (1-1/4-11-1/2-THD)  
8. 105-7543 [9] BLOCK-FUSE  
9. 109-6507 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
  398-1723 [1] NUT (3/16X18-THD)  
10. 111-1325 [1] BLOCK-CONTACT (2-POLE)  
11. 111-2111 [1] GUARD  
12. 116-5140 [83] TERMINAL  
13. 124-3176 [1] COVER  
14. 125-9969 [3] RAIL (PERFORATED)  
15. 235-3008 [1] FUSE (30-AMPERE)  
16. 244-9613 [1] GASKET  
17. 279-0515 [1] MODULE GP-ALARM  
18. 314-9101 [6] BRACKET-END  
19. 368-7106 Y [1] CONTROL GP-GENERATOR SET  
20. 390-2764 [1] BRACKET  
21. 418-7990 [1] BOX AS-CONTROL (EIS)  
22. 418-7991 [1] PANEL AS  
23. 418-8853 Y [1] HARNESS AS-PANEL  
24. 421-7872 [1] PLATE AS  
25. 422-1193 [1] FILM-IDENTIFICATION (ANNUNCIATOR)  
26. 422-1194 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
27. 422-1195 [1] MARKER AS-TERMINAL  
28. 422-1196 [3] SPACER (6.4X12.7X63.5-MM THK)  
29. 424-2206 [3] SCREW-FLAT HEAD (M6X1X80-MM)  
30. 099-6418 M [10] NUT (M6X1-THD)  
31. 110-6197 [3] GASKET  
32. 156-6175 [2] CLIP (LADDER)(LADDER)  
33. 311-5307 M [2] SCREW-BUTTON HEAD (M6X1X16-MM)  
34. 3B-4501 [4] LOCKWASHER  
35. 3S-2093 [6] STRAP-CABLE  
36. 4B-4863 [6] WASHER (4.7X11X1.2-MM THK)  
37. 4B-5324 [7] WASHER (3.9X9.6X1.2-MM THK)  
38. 5C-7261 M [4] NUT (M8X1.25-THD)  
39. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
40. 5S-4245 [12] SCREW-MACHINE (4-40X0.5-IN)  
41. 6B-4540 [12] NUT (4-40-THD)  
42. 6B-4542 [12] LOCKWASHER  
43. 7K-1181 B [5] STRAP-CABLE  
44. 7T-0037 [1] FUSE (0.75-AMPERE)  
45. 8T-6631 [10] SCREW-MACHINE (8-32X0.5-IN)  
46. 9D-3721 [1] SWITCH-TOGGLE (SINGLE POLE)(DIAGNOSTIC RESET)  
47. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
48. 9X-6258 [7] SCREW-MACHINE (6-32X0.5-IN)  
49. 9Y-6027 [7] FUSE-CERAMIC (10-AMPERE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22320852
 

418-6662: BOX GP-INSTRUMENT PANEL

418-6662 BOX GP-INSTRUMENT PANEL
OCP 4.3
Type 2
FIELD REPLACEMENT FOR @@@@@ 6V-6148@@@@@, @@@@@ 6V-6149@@@@@
AN ATTACHMENT
i06950262 SEBP2232
4186662 BOX GP-INSTRUMENT PANEL Parts scheme 4186662 BOX GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 1G-6420 C [6] SPRING (HOLD DOWN)  
2. 3E-2286 C [3] STRIP-CONTACT  
3. 3S-2093 [6] STRAP-CABLE  
4. 4P-6748 C [2] BUSHING-TERMINAL  
5. 7C-3659 [1] STRIP-TERMINAL  
6. 7K-1181 B [5] STRAP-CABLE  
7. 7R-3029 [3] CAP-DUST  
8. 8T-5570 [6] SOCKET  
9. 087-0546 [1] RELAY (24-VOLT)(STARTING MOTOR)  
9A. 087-0546 [1] RELAY (24-VOLT)(FUEL CONTROL)  
9B. 087-0546 [1] RELAY (24-VOLT)(STARTING AID)  
9C. 087-0546 [1] RELAY (24-VOLT)(ENGINE STARTED)  
9D. 087-0546 [1] RELAY (24-VOLT)(ENGINE FAILURE)  
9E. 087-0546 [1] RELAY (24-VOLT)(ENGINE COOLDOWN)  
10. 103-6272 [1] SEAL  
11. 105-7543 [9] BLOCK-FUSE  
12. 109-6507 [1] SWITCH AS-PUSH BUTTON (EMERGENCY STOP)  
  398-1723 [1] NUT (3/16X18-THD)  
13. 111-1325 [1] BLOCK-CONTACT (2-POLE)  
14. 111-2111 [1] GUARD  
15. 115-2538 C [2] COVER-END  
16. 116-5140 [83] TERMINAL  
17. 121-9195 C [1] RESISTOR AS  
18. 124-3176 [1] COVER  
19. 147-1960 [3] RAIL  
20. 235-3008 [1] FUSE (30-AMPERE)  
21. 244-9613 [1] GASKET  
22. 279-0515 [1] MODULE GP-ALARM  
23. 314-9101 [6] BRACKET-END  
24. 368-7106 Y [1] CONTROL GP-GENERATOR SET  
25. 418-7990 [1] BOX AS-CONTROL (EIS)  
26. 418-7991 [1] PANEL AS  
27. 418-8853 Y [1] HARNESS AS-PANEL  
28. 421-7872 [1] PLATE AS  
29. 422-1193 [1] FILM-IDENTIFICATION (ANNUNCIATOR)  
30. 422-1194 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
31. 422-1195 [1] MARKER AS-TERMINAL  
32. 422-1196 [3] SPACER (6.4X12.7X63.5-MM THK)  
33. 424-2206 [3] SCREW-FLAT HEAD (M6X1X80-MM)  
34. 062-5388 C [2] LOCKNUT (1-11-1/2-THD)  
35. 099-6418 M [10] NUT (M6X1-THD)  
36. 110-6197 [3] GASKET  
37. 156-6175 [2] CLIP (LADDER)(LADDER)  
38. 3B-4501 [4] LOCKWASHER  
39. 4B-4863 [6] WASHER (4.7X11X1.2-MM THK)  
40. 4B-5324 [7] WASHER (3.9X9.6X1.2-MM THK)  
41. 5C-7261 M [4] NUT (M8X1.25-THD)  
42. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 6V-2480 [12] SCREW (4-40X0.5-IN)  
44. 6B-4540 [12] NUT (4-40-THD)  
45. 6B-4542 [12] LOCKWASHER  
46. 7T-0037 [1] FUSE (0.75-AMPERE)  
47. 8T-6631 [10] SCREW-MACHINE (8-32X0.5-IN)  
48. 9D-3721 [1] SWITCH-TOGGLE (SINGLE POLE)(DIAGNOSTIC RESET)  
49. 9X-6258 [7] SCREW-MACHINE (6-32X0.5-IN)  
50. 9Y-6027 [7] FUSE-CERAMIC (10-AMPERE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22320853
 

101-0225: CONTROL GP-EMCP ELECTRONIC

101-0225 CONTROL GP-EMCP ELECTRONIC
AC TRANSFORMER BOX
PART OF 119-6031, 136-6924 PANEL GP-CONTROL
AN ATTACHMENT
i00462426 SEBP2232
1010225 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. [1] HOUSING AS (TRANSFORMER BOX-EMCP II)  
1A. 3N-5977 [1] BLOCK-FUSE (30-AMPERE)  
1B. 107-5696 [1] STRIP-TERMINAL  
1C. 107-5907 [1] FILM-IDENTIFICATION (TERMINAL MARKER)  
2. [1] CHANNEL AS (TRANSFORMER-EMCP II)  
2A. 4B-2049 [1] NUT (10-32-THD)  
2B. 8F-1434 [1] LOCKWASHER  
2C. 186-3736 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2D. 102-8816 [1] SEAL  
2E. 4B-4274 [11] WASHER (5.5X13X1.2-MM THK)  
2F. 155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 108-8127 [8] SCREW-PAN HEAD (10-24X0.25-IN)  
 

#SEBP22320854
 

118-0175: CONTROL GP-EMCP ELECTRONIC

118-0175 CONTROL GP-EMCP ELECTRONIC
AC TRANSFORMER BOX +
PART OF 158-6171, 158-6172, 318-6263 CONVERSION AR, 332-8866, 333-2392, 333-2393 KIT-ELECTRONIC CONVERSION
AN ATTACHMENT
i00478777 SEBP2232
1180175 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 4W-5276 [1] STRIP-TERMINAL  
1A. 3N-5977 [1] BLOCK-FUSE (30-AMPERE)  
2. 108-8127 [8] SCREW-PAN HEAD (10-24X0.25-IN)  
3. 3E-3386 [1] WEDGE-PLUG LOCK  
3A. 155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3B. 5P-1475 [7] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
3C. 5P-1476 [3] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
3D. 8L-8413 [16] STRAP-CABLE (WHITE)  
3E. 186-3736 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3F. 4B-2049 [9] NUT (10-32-THD)  
3G. 186-3736 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3H. 4B-4274 [15] WASHER (5.5X13X1.2-MM THK)  
4. 5N-5159 [3] JUMPER-STRIP  
 

#SEBP22320855
 

118-2070: CONTROL GP-EMCP ELECTRONIC

118-2070 CONTROL GP-EMCP ELECTRONIC
GENERATOR SET CONTROL +
PART OF 332-8866 KIT-ELECTRONIC CONVERSION, 194-0907 PANEL GP-CONTROL
AN ATTACHMENT
i00480772 SEBP2232
1182070 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 133-9850 [1] CONTROL GP-ELECTRONIC (RELAY MODULE)  
1A. 1S-4974 [1] SEAL-O-RING  
2. 4B-4863 [10] WASHER (4.7X11X1.2-MM THK)  
3. 9W-1464 [6] SCREW (1/4-20X1-IN)  
4. 3J-7354 [1] SEAL-O-RING  
5. 9S-8002 [1] PLUG (7/16-20-THD)  
   
  130-9715 F [1] FILM-INFORMATION (GENERATOR SET CONTROL +)  
  159-1798 F [1] FILM-CONTROL PANEL (GENERATOR SET CONTROL +)  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22320856
 

118-2122: CONTROL GP-EMCP ELECTRONIC

118-2122 CONTROL GP-EMCP ELECTRONIC
PART OF 119-6031, 136-6924 PANEL GP-CONTROL
AN ATTACHMENT
i00480859 SEBP2232
1182122 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 118-2121 Y [1] CONTROL GP-ENGINE ELECTRONIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22320857
 

133-6350: CONTROL GP-EMCP ELECTRONIC

133-6350 CONTROL GP-EMCP ELECTRONIC
S/N 5JD1-127
GENERATOR SET CONTROL
PART OF 194-0907 PANEL GP-CONTROL
FIELD REPLACEMENT ORDER @@@@@332-8866@@@@@, @@@@@333-2392@@@@@, @@@@@333-2393@@@@@
AN ATTACHMENT
i00751321 SEBP2232
1336350 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 1S-4974 [1] SEAL-O-RING  
2. 3J-7354 [1] SEAL-O-RING  
3. 108-8500 [1] CONTROL GP-ELECTRONIC (RELAY MODULE)  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 4B-4863 [10] WASHER (4.7X11X1.2-MM THK)  
6. 9W-1464 [6] SCREW (1/4-20X1-IN)  
   
  4P-6407 F [1] FILM-EMCP II  
  130-9716 F [1] FILM-INFORMATION (CONTROL PANEL)  
  F   NOT SHOWN
 

#SEBP22320858
 

137-5525: CONTROL GP-EMCP ELECTRONIC

137-5525 CONTROL GP-EMCP ELECTRONIC
GENERATOR SET CONTROL +
PART OF 137-5526 CONTROL GP-EMCP ELECTRONIC, 333-2392 KIT-ELECTRONIC CONVERSION
AN ATTACHMENT
i01098024 SEBP2232
1375525 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 1S-4974 [1] SEAL-O-RING  
2. 3J-7354 [1] SEAL-O-RING  
3. 4B-4863 [10] WASHER (4.7X11X1.2-MM THK)  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9W-1464 [6] SCREW (1/4-20X1-IN)  
6. 138-1778 [1] HOUSING AS-RELAY  
 

#SEBP22320859
 

137-5526: CONTROL GP-EMCP ELECTRONIC

137-5526 CONTROL GP-EMCP ELECTRONIC
GENERATOR SET CONTROL +
PART OF 158-6171, 158-6172, 318-6263 CONVERSION AR
AN ATTACHMENT
i01097935 SEBP2232
1375526 CONTROL GP-EMCP ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

Pos. Part No Qty Parts name Comments
1. 137-5525 Y [1] CONTROL GP-EMCP ELECTRONIC (GENERATOR SET CONTROL +)  
2. 130-9715 [1] FILM-INFORMATION (GENERATOR SET CONTROL +)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
New Electronic Pyrometer And Instrument Panel Mounting Group Improves Reliability{7451,7466}
1997/05/01
Manifold Inlet Air Temperature Indicator Probe Relocated To Improve Gauge Reliability {7450}
1997/12/16
New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01
Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
1998/12/01
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}
1999/04/01
New Repair Kit For Status Control Module Helps Prevent False Overcrank Faults {7451,1900}
1999/11/01
A New Pyrometer Is Available {7451, 7466}
2006/04/03
Revised Service Manual, RENR4911 , "Exhaust Temperature Scanner" {7451, 7466}
2006/04/03
A New Service Support Center Is Available For The Products That Are Assembled At The Large Engine Center {1000, 4490, 7002, 7274}
2001/09/01
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
An Improved Hose Assembly for the Gauge Assembly is Being Used {7454, 7455, 7456}
2004/06/01
New Instrument Panel Box Gp Is Now Available On Certain Cat<SUP>&reg;</SUP> Engines and Gensets {7451}
2013/05/17
New Instrument Panel Box Gp Is Now Available as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {4490}
2014/08/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Gauges and Indicators
G3500 Engines
Alarms and Shutoffs
G3500 Engines
Control Panel - Inspect
G3500 Engines
Engine Air Cleaner Service Indicator - Inspect
G3500 Engines
Control Panel
G3500 Engines
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Procedure to Upgrade the EMCP 1 to the Operator Control Panel (OCP) 4.3 {4490, 7451}
Procedure to Upgrade the EMCP 1 to the Operator Control Panel (OCP) 4.3 {4490, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REWIRING THE EMCPII PANEL ON CERTAIN G3508, G3512, AND G3516 GAS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWIRING THE EMCPII PANEL ON CERTAIN G3508, G3512, AND G3516 GAS ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
AC Factory Calibration Setpoint Viewing OP2-2
EMCPII+ for Gas Engines
AC Offset Adjustment OP10
EMCPII+ for Gas Engines
Alarm Mode
EMCPII+ for Gas Engines
Diagnostic Codes
EMCPII+ for Gas Engines
Engine Setpoint Verification OP9
EMCPII+ for Gas Engines
Engine/Generator Setpoint Viewing OP2-0
EMCPII+ for Gas Engines
Fault Log Clearing OP4
EMCPII+ for Gas Engines
Fault Log Viewing OP1
EMCPII+ for Gas Engines
Programmable Kilowatt Level Output
EMCPII+ for Gas Engines
Programmable Spare Output
EMCPII+ for Gas Engines
Programmable Spare Relay Outputs
EMCPII+ for Gas Engines
Protective Relaying Setpoint Viewing OP2-1
EMCPII+ for Gas Engines
SP Fault Codes
EMCPII+ for Gas Engines
Voltmeter/Ammeter Programming OP8
EMCPII+ for Gas Engines
Password Entry OP3
EMCPII+ for Gas Engines
Fault Description
EMCPII+ for Gas Engines
AL Fault Codes
EMCPII+ for Gas Engines
Component Location
EMCPII+ for Gas Engines
Data Link
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set)
EMCPII+ for Gas Engines
Instrument Panel
EMCPII+ for Gas Engines
Normal Mode
EMCPII+ for Gas Engines
General Information
EMCPII+ for Gas Engines
Modes Of Operation
EMCPII+ for Gas Engines
Spare Input/Output Programming OP6
EMCPII+ for Gas Engines
Engine/Generator Programming OP5-0
EMCPII+ for Gas Engines
Hourmeter Programming OP7
EMCPII+ for Gas Engines
General Information
EMCP3
Real Time Clock Programming
EMCP3
Setpoint Programming
EMCP3
Electronic Control Module (Generator Set)
EMCP3
Data Link
EMCP3
Event Resetting
EMCP3
Event Viewing
EMCP3
Thermocouple Module
EMCP3
Resistive Temperature Device Module
EMCP3
Discrete Input/Output Module
EMCP3
Password Entry
EMCP3
Voltage and Frequency Adjustment
EMCP3
Component Location
EMCP3
Digital Input Programming
EMCP3
Spare Analog Input Programming
EMCP3
Relay Output Programming
EMCP3
Digital Output Programming
EMCP3
System Operation
EMCP3
Shutdown Mode
EMCPII+ for Gas Engines
MUI Engine Monitoring and Control
EMCP3
Text String Programming
EMCP3
Cycle Timer Programming
EMCP3
Trip Point Programming
EMCP3
Monitoring Software for Computer
EMCP3
General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Status Control Module
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Operation Sequence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REWIRING THE EMCPII PANEL ON CERTAIN G3508, G3512, AND G3516 GAS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWIRING THE EMCPII PANEL ON CERTAIN G3508, G3512, AND G3516 GAS ENGINES
Testing and Adjusting
Symbols
EMCPII+ for Gas Engines
Connector Contact Identification of Generator Set Control
EMCPII+ for Gas Engines
Service Record
EMCPII+ for Gas Engines
External Potential Transformer Connections
EMCPII+ for Gas Engines
AC Voltage Range - Adjust
EMCPII+ for Gas Engines
Relay Module - Replace
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set) - Replace
EMCPII+ for Gas Engines
Typical Generator Abbreviations
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set) - Flash Program
EMCPII+ for Gas Engines
Block Diagram of Generator Set Control
EMCPII+ for Gas Engines
Typical Generator Abbreviations
EMCP3
External Potential Transformer Connections
EMCP3
Electronic Control Module (Generator Set) - Replace
EMCP3
Electronic Control Module (Generator Set) - Configure
EMCP3
Electronic Control Module (Generator Set) - Flash Program
EMCP3
ECM Connections
EMCP3
Engine Setpoint Verification - Test
EMCP3
Setpoint Programming
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Relay Module - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Starting Motor Magnetic Switch - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Overspeed Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
High Coolant Temperature Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Low Oil Pressure Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Troubleshooting
GSC CID 0500 - FMI 12
EMCPII+ for Gas Engines
GSC CID 0268 - FMI 02
EMCPII+ for Gas Engines
GSC CID 0336 - FMI 02
EMCPII+ for Gas Engines
General Information
EMCP3
GSC CID 0334 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0859 - FMI 03
EMCPII+ for Gas Engines
SP Fault Code
EMCPII+ for Gas Engines
Troubleshooting Dedicated Shutdown Indicators
EMCPII+ for Gas Engines
GSC CID 0448 - FMI 12
EMCPII+ for Gas Engines
Indicator for Engine Overspeed
EMCPII+ for Gas Engines
GSC CID 0859 - FMI 04
EMCPII+ for Gas Engines
Indicator for Low Coolant Level
EMCPII+ for Gas Engines
GSC Operation Is Erratic
EMCPII+ for Gas Engines
GSC CID 0334 - FMI 04
EMCPII+ for Gas Engines
AL Fault Code
EMCPII+ for Gas Engines
Indicator for Overcrank
EMCPII+ for Gas Engines
Fault Identification
EMCPII+ for Gas Engines
Display of Voltage or Current Is Zero
EMCPII+ for Gas Engines
Display of Voltage or Current or Power Is Inaccurate
EMCPII+ for Gas Engines
Troubleshooting Diagnostic Codes
EMCPII+ for Gas Engines
GSC CID 0442 - FMI 12
EMCPII+ for Gas Engines
GSC CID 0443 - FMI 12
EMCPII+ for Gas Engines
Indicator for Emergency Stop
EMCPII+ for Gas Engines
Indicator for High Water Temperature
EMCPII+ for Gas Engines
Indicator for Low Oil Pressure
EMCPII+ for Gas Engines
GSC CID 0446 - FMI 12
EMCPII+ for Gas Engines
Engine Does Not Shutdown (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0248 - FMI 09 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0441 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0444 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0445 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0447 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0566 - FMI 07 (for Engine with EIS)
EMCPII+ for Gas Engines
MID 014 - CID 0321 - FMI 04 Diagnostic Reset Switch short to ground
G3500 Engines
MID 018 - CID 0321 - FMI 04 Diagnostic Reset Switch short to ground
G3500 Engines
Diagnostic Reset Switch
G3500 Engines
Engine Cooldown Warning
EMCP3
Engine Overcrank Warning
EMCP3
Engine Speed Warning
EMCP3
Generator Control Not in Automatic Warning
EMCP3
Generator Overcurrent Warning
EMCP3
Generator Overfrequency Warning
EMCP3
Generator Overvoltage Warning
EMCP3
Generator Reverse Power Warning
EMCP3
Generator Underfrequency Warning
EMCP3
Generator Undervoltage Warning
EMCP3
Service Maintenance Interval Warning
EMCP3
Analog Input Circuit Fault
EMCP3
Data Link Circuit Fault
EMCP3
Digital Input Circuit Fault
EMCP3
Digital Output Circuit Fault
EMCP3
Engine Speed Circuit Fault
EMCP3
Unexpected Engine Shutdown
EMCP3
Generator Output Sensing Circuit Fault
EMCP3
Engine Overspeed Warning
EMCP3
Engine Underspeed Warning
EMCP3
General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Service Tools
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Symptom Troubleshooting
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Shutdown Unexpected and All Fault Indicators Are Flashing
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Fault Indicator Does Not Reset
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Overcrank Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Overspeed Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Low Oil Pressure Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
High Coolant Temperature Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Emergency Stop Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Auxiliary Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Does Not Shutdown
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Shutdown Unexpected without Any Annunciation
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Indicators of Alarm Module or Remote Annunciator Are Constantly Flashing
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Diagnostic Trouble Codes
G3412C, G3508, G3512 and G3516 Engines Status Control Module
04 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
05 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
06 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
07 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Disassembly and Assembly
Service Meter - Remove and Install
G3500 Engines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23
New Instrument Panel Box Gp Is Now Available as Service Replacement for Certain Cat<SUP>&reg;</SUP> Engines {7451, 7490}
2013/01/04
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog G3512 :

BOX GP-CONTROL PANEL
4P-9571 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
450-9621 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
368-7107 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
195-4769 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
194-2461 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
194-0883 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
194-0883 BOX GP-CONTROL PANEL
BOX GP-CONTROL PANEL
194-0882 BOX GP-CONTROL PANEL
BOX GP-INSTRUMENT PANEL
418-6662 BOX GP-INSTRUMENT PANEL
BOX GP-INSTRUMENT PANEL
418-6662 BOX GP-INSTRUMENT PANEL
CONTROL GP-EMCP ELECTRONIC
101-0225 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
118-0175 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
118-2070 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
118-2122 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
133-6350 CONTROL GP-EMCP ELECTRONIC
CONTROL GP-EMCP ELECTRONIC
137-5525 CONTROL GP-EMCP ELECTRONIC

Truck sale:

Caterpillar G3512, Construction
124,000 USD 
Caterpillar G3512, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
616,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
525,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
639,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
Caterpillar G3512EP, Construction
85,000 
Caterpillar G3512EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY