AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

366-4622 KIT-SERVICE METER RELEASED TO PROVIDE A SERVICE KIT FOR DIGITAL HOURMETER WITH IMPROVED ELECTRICAL PROTECTION PART OF 107-9020 METER GP-SERVICE AN ATTACHMENT G3508


OPERATOR STATION
PANEL GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
CONTACTOR GP
HEATER GP

GAS ENGINE G3508 GAS ENGINE 4WD
 G3508 Standard Engine Electronic Ignition System 4WD00001-UP SEBP2233 G3508 4WD   (1991)

OPERATOR STATION

PANEL GP
GAUGE GP-OIL FILTER PRESS DIFF
130-8164 GAUGE GP-OIL FILTER PRESS DIFF
366-4622 KIT-SERVICE METER
107-9027 AMMETER GP
AMMETER GP
3N-9012 AMMETER GP
123-6323 BOX GP-CONTROL PANEL
 

#SEBP22330580
 

366-4622: KIT-SERVICE METER

366-4622 KIT-SERVICE METER
RELEASED TO PROVIDE A SERVICE KIT FOR DIGITAL HOURMETER WITH IMPROVED ELECTRICAL PROTECTION
PART OF 107-9020 METER GP-SERVICE
AN ATTACHMENT
i05340278 SEBP2233
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22330581
 

8N-8481: LINES GP-AIR STARTING

8N-8481 LINES GP-AIR STARTING
Type 1
FOR USE WITH AIR START OR AIR START WITH ELECTRIC PRELUBRICATION
CANNOT BE USED WITH NATURAL GAS WITH GREATER THAN 0.1 PERCENT HYDROGEN SULFIDE
AN ATTACHMENT
i00415358 SEBP2233
8N8481 LINES GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7666 [1] ELBOW  
2. 6B-3685 [1] ELBOW  
3. 4N-3411 J [1] VALVE GP-RELAY  
4. 4N-7556 Y [1] LUBRICATOR GP-AIR MOTOR  
5. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
6. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 5B-7643 C [2] NIPPLE-PIPE  
8. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
9. 3L-8993 C [1] FITTING  
10. 6F-5985 I [1] HOSE AS  
11. 5N-2728 [1] ELBOW  
12. 3B-6552 [1] ELBOW-PIPE  
13. 4M-5317 [2] BUSHING-REDUCER  
14. 6N-3169 I [1] HOSE AS  
15. 3J-7355 [2] UNION-FLARED  
16. 3N-4622 I [1] HOSE AS  
17. 5L-2534 [1] U-BOLT  
18. 8N-8449 [1] BRACKET  
19. 2L-2811 [2] FITTING  
20. 6K-1972 [1] ELBOW-FLARED  
21. 6N-3170 CI [1] HOSE AS  
22. 3B-6492 [1] COUPLING-PIPE (1-1/2-11-1/2 NPT THD)  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 BJ KIT-VALVE SEAL (AIR STARTING)  
    (KIT INCLUDES SEALS, BUMPER, & RETAINER)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22330582
 

8N-8481: LINES GP-AIR STARTING

8N-8481 LINES GP-AIR STARTING
Type 2
FOR USE WITH AIR START OR AIR START WITH ELECTRIC PRELUBRICATION
CANNOT BE USED WITH NATURAL GAS WITH GREATER THAN 0.1 PERCENT HYDROGEN SULFIDE
AN ATTACHMENT
i00415362 SEBP2233
8N8481 LINES GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6492 [1] COUPLING-PIPE (1-1/2-11-1/2 NPT THD)  
2. 5B-7666 C [3] ELBOW  
3. 4N-3411 J [1] VALVE GP-RELAY (AIR STARTING)  
4. 119-6284 YC [1] LUBRICATOR GP-AIR MOTOR  
5. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
6. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 5B-7643 [2] NIPPLE-PIPE  
8. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
9. 6F-5985 I [1] HOSE AS  
10. 4M-5317 [2] BUSHING-REDUCER  
11. 3J-7355 C [1] UNION-FLARED  
12. 3N-4622 CI [2] HOSE AS  
13. 5L-2534 [1] U-BOLT  
14. 8N-8449 [1] BRACKET  
15. 2L-2811 C [1] FITTING  
16. 6K-1972 [1] ELBOW-FLARED  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 BJ KIT-VALVE SEAL (AIR STARTING)  
    (KIT INCLUDES SEALS, BUMPER & RETAINER)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22330583
 

8N-8481: LINES GP-AIR STARTING

8N-8481 LINES GP-AIR STARTING
Type 3
FOR USE WITH AIR START OR AIR START WITH ELECTRIC PRELUBRICATION
CANNOT BE USED WITH NATURAL GAS WITH GREATER THAN 0.1 PERCENT HYDROGEN SULFIDE
AN ATTACHMENT
i01587613 SEBP2233
8N8481 LINES GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-2811 C [2] FITTING  
3. 3J-7355 [1] UNION-FLARED  
4. 3N-4622 CI [1] HOSE AS  
5. 4N-3411 J [1] VALVE GP-RELAY (AIR STARTING)  
6. 6B-3685 C [2] ELBOW  
7. 6F-5985 I [1] HOSE AS  
8. 6N-3170 CI [1] HOSE AS  
10. 8N-8449 [1] BRACKET  
11. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
12. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
13. 3L-8993 C [1] FITTING  
14. 4M-5317 [2] BUSHING-REDUCER  
15. 204-0241 [1] FITTING  
16. 5B-7666 C [1] ELBOW  
17. 5L-2534 [1] U-BOLT  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 5P-8245 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 6K-1972 [1] ELBOW-FLARED  
21. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 BJ KIT-VALVE SEAL (AIR STARTING)  
    (INCLUDES SEALS, BUMPER & RETAINER)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J AVAILABLE FOR PART MARKED J
  Y   SEPARATE ILLUSTRATION
 

#SEBP22330584
 

119-6282: LUBRICATOR GP-AIR MOTOR

119-6282 LUBRICATOR GP-AIR MOTOR
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
AN ATTACHMENT
i00073320 SEBP2233
1196282 LUBRICATOR GP-AIR MOTOR Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2192 [1] BOWL  
2. 6N-2191 [1] SEAT  
3. 6N-2190 [1] SPRING  
4. 6N-2188 [2] BALL  
5. 7C-4429 [1] SEAL  
6. 6N-2185 [2] PLUG-FILLER  
7. 6N-2184 [1] GASKET  
8. 6N-2193 [1] TUBE-SIPHON  
 

#SEBP22330585
 

119-6283: LUBRICATOR GP-AIR MOTOR

119-6283 LUBRICATOR GP-AIR MOTOR
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
AN ATTACHMENT
i01128259 SEBP2233
1196283 LUBRICATOR GP-AIR MOTOR Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22330586
 

119-6284: LUBRICATOR GP-AIR MOTOR

119-6284 LUBRICATOR GP-AIR MOTOR
PART OF 8N-8481 LINES GP-AIR STARTING
FIELD REPLACEMENT FOR @@@@@119-6282@@@@@, @@@@@119-6283@@@@@
AN ATTACHMENT
i00071705 SEBP2233
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  119-6282 Y [1] LUBRICATOR GP-AIR MOTOR  
    -OR-
  119-6283 Y [1] LUBRICATOR GP-AIR MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22330587
 

4N-7556: LUBRICATOR GP-AIR MOTOR

4N-7556 LUBRICATOR GP-AIR MOTOR
PART OF 8N-8481 LINES GP-AIR STARTING
AN ATTACHMENT
i00370927 SEBP2233
4N7556 LUBRICATOR GP-AIR MOTOR Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4429 C [1] SEAL  
2. 6N-2185 [2] PLUG-FILLER  
3. 6N-2188 [2] BALL  
4. 6N-2192 [1] BOWL  
5. 6N-2193 [1] TUBE-SIPHON  
6. 6N-2191 [1] SEAT  
7. 6N-2190 [1] SPRING  
8. 6N-2184 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22330588
 

103-1956: MOUNTING GP-CONTACTOR

103-1956 MOUNTING GP-CONTACTOR
FOR USE WITH EMPC II
AN ATTACHMENT
i00468645 SEBP2233
1031956 MOUNTING GP-CONTACTOR Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-0263 [1] ADAPTER  
2. 3J-7354 [1] SEAL-O-RING  
 

#SEBP22330589
 

136-9728: MOUNTING GP-JACKET WTR HEATER

136-9728 MOUNTING GP-JACKET WTR HEATER -RH
S/N 4WD1-22
CANNOT BE USED WITH HEAVY DUTY AIR CLEANER, RH SUMP PUMP, RH PRELUBRICATION CONVERSION
AN ATTACHMENT
i00794188 SEBP2233
1369728 MOUNTING GP-JACKET WTR HEATER Parts scheme
  For full view, you need register

Parts for your G3508 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-3098 [1] TUBE AS  
2. 1S-2303 [2] SPACER (1.062X1.75X1.44-IN THK)  
3. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
4. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 5P-8250 [2] WASHER (28X49X5-MM THK)  
6. 0S-1619 [2] BOLT (3/8-16X3-IN)  
7. 6H-8297 [2] ELBOW  
8. 034-0728 [2] CLIP  
9. 7K-3377 [2] PIPE  
10. 136-9730 I [1] HOSE AS  
11. 6F-0496 [1] TEE-PIPE  
12. 3E-7430 [1] PLUG-PIPE  
13. 3E-7404 [2] CLAMP-HOSE  
14. 144-2159 I [1] HOSE AS  
15. 9S-1368 [2] BOLT (1-14X3.5-IN)  
16. 7C-1707 [1] BRACKET AS  
17. 3B-6498 [1] ELBOW  
18. 8C-1358 [2] VALVE-BALL  
19. 4W-2110 [1] RING-RETAINING  
20. 134-3100 [1] FLANGE  
21. 4W-2109 [2] RETAINER  
22. 030-8307 [1] CONNECTOR  
23. 3B-7728 [1] ELBOW  
24. 004-7270 [1] FITTING-PIPE  
25. 0S-1594 [4] BOLT (3/8-16X1-IN)  
26. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
27. 9M-4849 [1] SEAL-O-RING  
28. 6B-9081 [2] BUSHING-REDUCER  
29. 7C-4354 [1] CLIP  
30. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
32. 8B-0544 [1] SPACER  
33. 3B-7745 [1] NIPPLE-PIPE  
34. 7N-4945 [1] GASKET  
35. 1K-6937 [1] ELBOW-PIPE  
36. 3P-2021 [1] NIPPLE-PIPE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Engine News
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01
New Air Filter Restriction Indicator Now Reads 25 Inches Maximum{7452,1051}
1995/06/01
New Electronic Pyrometer And Instrument Panel Mounting Group Improves Reliability{7451,7466}
1997/05/01
Manifold Inlet Air Temperature Indicator Probe Relocated To Improve Gauge Reliability {7450}
1997/12/16
New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01
Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
1998/12/01
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}
1999/04/01
New Repair Kit For Status Control Module Helps Prevent False Overcrank Faults {7451,1900}
1999/11/01
A New Pyrometer Is Available {7451, 7466}
2006/04/03
Revised Service Manual, RENR4911 , "Exhaust Temperature Scanner" {7451, 7466}
2006/04/03
A New Service Support Center Is Available For The Products That Are Assembled At The Large Engine Center {1000, 4490, 7002, 7274}
2001/09/01
Improved Troubleshooting Procedures for EMCPII, EMCPII+, and EMCPII+P Annunciators {4490}
2001/10/01
An Improved Hose Assembly for the Gauge Assembly is Being Used {7454, 7455, 7456}
2004/06/01
New Instrument Panel Box Gp Is Now Available On Certain Cat<SUP>&reg;</SUP> Engines and Gensets {7451}
2013/05/17
New Instrument Panel Box Gp Is Now Available as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {4490}
2014/08/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Gauges and Indicators
G3500 Engines
Alarms and Shutoffs
G3500 Engines
Control Panel - Inspect
G3500 Engines
Engine Air Cleaner Service Indicator - Inspect
G3500 Engines
Control Panel
G3500 Engines
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1494 Service Meter Kit {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Installation Instructions for the 9W-1490, 9W-1491, 9W-1494, 9W-1495 Service Meter Kits {7478}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Procedure to Upgrade the EMCP 1 to the Operator Control Panel (OCP) 4.3 {4490, 7451}
Procedure to Upgrade the EMCP 1 to the Operator Control Panel (OCP) 4.3 {4490, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Systems Operation
AC Factory Calibration Setpoint Viewing OP2-2
EMCPII+ for Gas Engines
AC Offset Adjustment OP10
EMCPII+ for Gas Engines
Alarm Mode
EMCPII+ for Gas Engines
Diagnostic Codes
EMCPII+ for Gas Engines
Engine Setpoint Verification OP9
EMCPII+ for Gas Engines
Engine/Generator Setpoint Viewing OP2-0
EMCPII+ for Gas Engines
Fault Log Clearing OP4
EMCPII+ for Gas Engines
Fault Log Viewing OP1
EMCPII+ for Gas Engines
Programmable Kilowatt Level Output
EMCPII+ for Gas Engines
Programmable Spare Output
EMCPII+ for Gas Engines
Programmable Spare Relay Outputs
EMCPII+ for Gas Engines
Protective Relaying Setpoint Viewing OP2-1
EMCPII+ for Gas Engines
SP Fault Codes
EMCPII+ for Gas Engines
Voltmeter/Ammeter Programming OP8
EMCPII+ for Gas Engines
Password Entry OP3
EMCPII+ for Gas Engines
Fault Description
EMCPII+ for Gas Engines
AL Fault Codes
EMCPII+ for Gas Engines
Component Location
EMCPII+ for Gas Engines
Data Link
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set)
EMCPII+ for Gas Engines
Instrument Panel
EMCPII+ for Gas Engines
Normal Mode
EMCPII+ for Gas Engines
General Information
EMCPII+ for Gas Engines
Modes Of Operation
EMCPII+ for Gas Engines
Spare Input/Output Programming OP6
EMCPII+ for Gas Engines
Engine/Generator Programming OP5-0
EMCPII+ for Gas Engines
Hourmeter Programming OP7
EMCPII+ for Gas Engines
General Information
EMCP3
Real Time Clock Programming
EMCP3
Setpoint Programming
EMCP3
Electronic Control Module (Generator Set)
EMCP3
Data Link
EMCP3
Event Resetting
EMCP3
Event Viewing
EMCP3
Thermocouple Module
EMCP3
Resistive Temperature Device Module
EMCP3
Discrete Input/Output Module
EMCP3
Password Entry
EMCP3
Voltage and Frequency Adjustment
EMCP3
Component Location
EMCP3
Digital Input Programming
EMCP3
Spare Analog Input Programming
EMCP3
Relay Output Programming
EMCP3
Digital Output Programming
EMCP3
System Operation
EMCP3
Shutdown Mode
EMCPII+ for Gas Engines
MUI Engine Monitoring and Control
EMCP3
Text String Programming
EMCP3
Cycle Timer Programming
EMCP3
Trip Point Programming
EMCP3
Monitoring Software for Computer
EMCP3
General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Status Control Module
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Operation Sequence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Testing and Adjusting
Symbols
EMCPII+ for Gas Engines
Connector Contact Identification of Generator Set Control
EMCPII+ for Gas Engines
Service Record
EMCPII+ for Gas Engines
External Potential Transformer Connections
EMCPII+ for Gas Engines
AC Voltage Range - Adjust
EMCPII+ for Gas Engines
Relay Module - Replace
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set) - Replace
EMCPII+ for Gas Engines
Typical Generator Abbreviations
EMCPII+ for Gas Engines
EMCP Electronic Control (Generator Set) - Flash Program
EMCPII+ for Gas Engines
Block Diagram of Generator Set Control
EMCPII+ for Gas Engines
Typical Generator Abbreviations
EMCP3
External Potential Transformer Connections
EMCP3
Electronic Control Module (Generator Set) - Replace
EMCP3
Electronic Control Module (Generator Set) - Configure
EMCP3
Electronic Control Module (Generator Set) - Flash Program
EMCP3
ECM Connections
EMCP3
Engine Setpoint Verification - Test
EMCP3
Setpoint Programming
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Relay Module - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Starting Motor Magnetic Switch - Test
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Overspeed Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
High Coolant Temperature Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Low Oil Pressure Protection - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Troubleshooting
GSC CID 0500 - FMI 12
EMCPII+ for Gas Engines
GSC CID 0268 - FMI 02
EMCPII+ for Gas Engines
GSC CID 0336 - FMI 02
EMCPII+ for Gas Engines
General Information
EMCP3
GSC CID 0334 - FMI 03
EMCPII+ for Gas Engines
GSC CID 0859 - FMI 03
EMCPII+ for Gas Engines
SP Fault Code
EMCPII+ for Gas Engines
Troubleshooting Dedicated Shutdown Indicators
EMCPII+ for Gas Engines
GSC CID 0448 - FMI 12
EMCPII+ for Gas Engines
Indicator for Engine Overspeed
EMCPII+ for Gas Engines
GSC CID 0859 - FMI 04
EMCPII+ for Gas Engines
Indicator for Low Coolant Level
EMCPII+ for Gas Engines
GSC Operation Is Erratic
EMCPII+ for Gas Engines
GSC CID 0334 - FMI 04
EMCPII+ for Gas Engines
AL Fault Code
EMCPII+ for Gas Engines
Indicator for Overcrank
EMCPII+ for Gas Engines
Fault Identification
EMCPII+ for Gas Engines
Display of Voltage or Current Is Zero
EMCPII+ for Gas Engines
Display of Voltage or Current or Power Is Inaccurate
EMCPII+ for Gas Engines
Troubleshooting Diagnostic Codes
EMCPII+ for Gas Engines
GSC CID 0442 - FMI 12
EMCPII+ for Gas Engines
GSC CID 0443 - FMI 12
EMCPII+ for Gas Engines
Indicator for Emergency Stop
EMCPII+ for Gas Engines
Indicator for High Water Temperature
EMCPII+ for Gas Engines
Indicator for Low Oil Pressure
EMCPII+ for Gas Engines
GSC CID 0446 - FMI 12
EMCPII+ for Gas Engines
Engine Does Not Shutdown (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0248 - FMI 09 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0441 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0444 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0445 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0447 - FMI 12 (for Engine with EIS)
EMCPII+ for Gas Engines
GSC CID 0566 - FMI 07 (for Engine with EIS)
EMCPII+ for Gas Engines
MID 014 - CID 0321 - FMI 04 Diagnostic Reset Switch short to ground
G3500 Engines
MID 018 - CID 0321 - FMI 04 Diagnostic Reset Switch short to ground
G3500 Engines
Diagnostic Reset Switch
G3500 Engines
Engine Cooldown Warning
EMCP3
Engine Overcrank Warning
EMCP3
Engine Speed Warning
EMCP3
Generator Control Not in Automatic Warning
EMCP3
Generator Overcurrent Warning
EMCP3
Generator Overfrequency Warning
EMCP3
Generator Overvoltage Warning
EMCP3
Generator Reverse Power Warning
EMCP3
Generator Underfrequency Warning
EMCP3
Generator Undervoltage Warning
EMCP3
Service Maintenance Interval Warning
EMCP3
Analog Input Circuit Fault
EMCP3
Data Link Circuit Fault
EMCP3
Digital Input Circuit Fault
EMCP3
Digital Output Circuit Fault
EMCP3
Engine Speed Circuit Fault
EMCP3
Unexpected Engine Shutdown
EMCP3
Generator Output Sensing Circuit Fault
EMCP3
Engine Overspeed Warning
EMCP3
Engine Underspeed Warning
EMCP3
General Information
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Service Tools
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Symptom Troubleshooting
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Shutdown Unexpected and All Fault Indicators Are Flashing
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Fault Indicator Does Not Reset
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Overcrank Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Overspeed Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Low Oil Pressure Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
High Coolant Temperature Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Emergency Stop Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Auxiliary Shutdown Occurrence
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Does Not Shutdown
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Engine Shutdown Unexpected without Any Annunciation
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Indicators of Alarm Module or Remote Annunciator Are Constantly Flashing
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Diagnostic Trouble Codes
G3412C, G3508, G3512 and G3516 Engines Status Control Module
04 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
05 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
06 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
07 dIAG
G3412C, G3508, G3512 and G3516 Engines Status Control Module
Disassembly and Assembly
Service Meter - Remove and Install
G3500 Engines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23
New Instrument Panel Box Gp Is Now Available as Service Replacement for Certain Cat<SUP>&reg;</SUP> Engines {7451, 7490}
2013/01/04
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog G3508 :

512-9822 INSTALLATION GP-COMMUNICATION
464-6133 INSTALLATION GP-COMMUNICATION
464-6132 INSTALLATION GP-COMMUNICATION
IGNITION GP-GAS ENGINE
4P-8192 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
4P-8192 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
4P-8192 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
4P-8192 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
4P-8192 IGNITION GP-GAS ENGINE
LINES GP-AIR STARTING
8N-8481 LINES GP-AIR STARTING
LINES GP-AIR STARTING
8N-8481 LINES GP-AIR STARTING
LINES GP-AIR STARTING
8N-8481 LINES GP-AIR STARTING
LUBRICATOR GP-AIR MOTOR
119-6282 LUBRICATOR GP-AIR MOTOR
LUBRICATOR GP-AIR MOTOR
119-6283 LUBRICATOR GP-AIR MOTOR
119-6284 LUBRICATOR GP-AIR MOTOR
LUBRICATOR GP-AIR MOTOR
4N-7556 LUBRICATOR GP-AIR MOTOR
MOUNTING GP-CONTACTOR
103-1956 MOUNTING GP-CONTACTOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.