8N-0744 COOLER GP-HYDRAULIC OIL S/N 73W14800-UP PART OF 105-6574, 137-4987 ENGINE AR D10N TRACK-TYPE TRACTOR

Part No	Qty	Parts name
9T-9203 Y	[1]	CYLINDER GP-DUAL TILT
9T-9204 Y	[1]	CYLINDER GP-TILT (BULLDOZER)
9W-3245 Y	[1]	LINES GP-TILT CYLINDER
		-OR-
110-4728 Y	[1]	LINES GP-TILT CYLINDER
9W-5145 Y	[1]	LINK GP-STABILIZER
		-OR-
110-4724 Y	[1]	LINK GP-STABILIZER
Y		SEPARATE ILLUSTRATION

#SEBP22370332

9T-2869: CYLINDER GP-BULLDOZER LIFT

CYLINDER GP-BULLDOZER LIFT

9T-2869 CYLINDER GP-BULLDOZER LIFT
S/N 7RH1-UP; 7WH1-UP; 3SK1-UP
158.75-MM (6.25-IN) BORE X 1652.9-MM (65.1-IN) STROKE
PART OF 101-0702 VALVE & CYLINDER GP
AN ATTACHMENT

i00433159 SEBP2237

9T2869 CYLINDER GP-BULLDOZER LIFT Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-0564	[1]	LOCKNUT (2-12-THD)
2.	5J-3326	[1]	RING-WEAR
3.	9T-7061	[1]	PISTON AS
4.	9T-7059	[2]	PLUNGER
	1J-8569	[4]	INSERT-PISTON
5.	2J-1740	[1]	SPACER (2.033X3.5X0.372-IN THK)
6.	9T-2868	[1]	CYLINDER AS
7.	5J-1193	[2]	BUSHING
8.	8F-8733	[1]	SEAL-O-RING
9.	4J-9223	[1]	RING
10.	104-7838	[1]	HEAD
11.	1D-4628	[4]	BOLT (7/8-9X3.25-IN)
12.	2H-3856	[2]	BOLT (7/8-9X3.75-IN)
13.	5P-8249	[6]	WASHER-HARD (24X41.5X4-MM THK)
14.	8C-9127	[1]	SEAL AS
15.	5J-4990	[1]	SEAL AS
16.	8T-6746	[1]	RING-WEAR
17.	8C-5219	[1]	SEAL-LIP TYPE
18.	5J-8350	[1]	SEAL-U-CUP
19.	9T-2865	[1]	ROD AS
20.	1J-2192	[1]	BUSHING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370333

9T-2869: CYLINDER GP-BULLDOZER LIFT

CYLINDER GP-BULLDOZER LIFT

9T-2869 CYLINDER GP-BULLDOZER LIFT
S/N 7RH1-99999; 7WH1-99999; 3SK1-99999
158.75-MM (6.25-IN) BORE X 1652.9-MM (65.1-IN) STROKE
PART OF 101-0702 VALVE & CYLINDER GP
AN ATTACHMENT

i00433163 SEBP2237

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2J-0564	[1]	LOCKNUT (2-12-THD)
2.	5J-3326	[1]	RING-WEAR
3.	142-2725	[1]	PISTON AS
4.	9T-7059	[2]	PLUNGER
	1J-8569	[4]	INSERT-PISTON
5.	2J-1740	[1]	SPACER (2.033X3.5X0.372-IN THK)
6.	9T-2868	[1]	CYLINDER AS
7.	5J-1193	[2]	BUSHING
8.	6V-5657	[1]	SEAL-O-RING
9.	6V-5658	[1]	RING-BACKUP
10.	142-2723	[1]	HEAD
11.	1D-4628	[4]	BOLT (7/8-9X3.25-IN)
12.	2H-3856	[2]	BOLT (7/8-9X3.75-IN)
13.	5P-8249	[6]	WASHER-HARD (24X41.5X4-MM THK)
14.	142-2633	[1]	SEAL-BUFFER
15.	8T-1788	[1]	SEAL AS
16.	132-4907 C	[1]	RING-WEAR
17.	8C-5219	[1]	SEAL-LIP TYPE
18.	5J-8350	[1]	SEAL-U-CUP
19.	9T-2865	[1]	ROD AS
20.	1J-2192	[1]	BUSHING
21.	2H-3755 C	[4]	BOLT (5/16-18X0.43-IN)
22.	7S-6369 C	[4]	WASHER (0.344X0.75X0.188-IN THK)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370334

232-0652: CYLINDER GP-DUAL TILT

CYLINDER GP-DUAL TILT

232-0652 CYLINDER GP-DUAL TILT -LH
S/N 3SK1-UP
235-MM (9.25-IN) BORE X 241-MM (9.48-IN) STROKE

i02048385 SEBP2237

2320652 CYLINDER GP-DUAL TILT Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	4J-8734	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-3667	[1]	HEAD
4.	9T-9682	[1]	ROD AS
4A.	117-3006	[1]	BEARING
	5L-4756	[2]	RING-RETAINING
5.	107-0576	[2]	WASHER (85X120X4.76-MM THK)
6.	315-7856	[1]	PISTON AS
6A.	118-0611	[4]	INSERT
6B.	314-6901	[2]	PLUNGER
7.	234-0144	[1]	CYLINDER AS (LH)
7A.	4J-2379	[2]	BUSHING
8.	158-3032 J	[1]	RING-BACKUP
9.	311-9319 J	[1]	SEAL AS-BUFFER
10.	311-9320 J	[1]	SEAL-U-CUP
11.	1U-3174 J	[1]	SEAL-O-RING
12.	311-9321 J	[1]	SEAL-WIPER
13.	3S-1349	[6]	WASHER-HARD (31X52.5X6-MM THK)
14.	4T-4143 J	[1]	SEAL AS
15.	5M-0544	[6]	BOLT (1-1/8-7X4.5-IN)
16.	7J-2087 J	[1]	RING-WEAR
17.	8T-6747 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	246-0648 J	[1]	KIT-HYDRAULIC CYLINDER
			(ALSO INCLUDES HEAD SEAL)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370335

232-0653: CYLINDER GP-DUAL TILT

CYLINDER GP-DUAL TILT

232-0653 CYLINDER GP-DUAL TILT -RH
S/N 3SK1-UP
235-MM (9.25-IN) BORE X 241-MM (9.48-IN) STROKE

i02048500 SEBP2237

2320653 CYLINDER GP-DUAL TILT Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	4J-8734	[1]	LOCKNUT (2-3/4-12-THD)
3.	6E-3667	[1]	HEAD
4.	9T-9682	[1]	ROD AS
	5L-4756	[2]	RING-RETAINING
	117-3006	[1]	BEARING
5.	107-0576	[2]	WASHER (85X120X4.76-MM THK)
6.	315-7856	[1]	PISTON AS
6A.	118-0611	[4]	INSERT
7.	234-0143	[1]	CYLINDER AS
	4J-2379	[2]	BUSHING
8.	158-3032	[1]	RING-BACKUP
9.	167-2216	[1]	SEAL AS-BUFFER
10.	167-2331	[1]	SEAL-U-CUP
11.	1U-3174	[1]	SEAL-O-RING
12.	225-3287	[1]	SEAL-WIPER
13.	3S-1349	[6]	WASHER-HARD (31X52.5X6-MM THK)
14.	4T-4143	[1]	SEAL AS
15.	5M-0544	[6]	BOLT (1-1/8-7X4.5-IN)
16.	7J-2087	[1]	RING-WEAR
17.	8T-6747	[1]	RING-WEAR
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370336

9T-9203: CYLINDER GP-DUAL TILT

CYLINDER GP-DUAL TILT

9T-9203 CYLINDER GP-DUAL TILT -RH
S/N 3SK1-UP
235MM (9.25IN) BORE X 238MM (9.40IN) STROKE. TWIN TILT BLADE
PART OF 4T-8285 CYLINDER AR-TILT
FIELD REPLACEMENT ORDER @@@@@232-0653@@@@@
AN ATTACHMENT

i00437389 SEBP2237

9T9203 CYLINDER GP-DUAL TILT Parts scheme

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-9201	[1]	CYLINDER AS (RH)
1A.	4J-2379	[2]	BUSHING
1B.	1U-2532	[2]	BAR
1C.	1U-3658	[1]	HANDLE
2.	4J-8734	[1]	LOCKNUT (2-3/4-12-THD)
3.	7J-2087	[1]	RING-WEAR
4.	4T-4143	[1]	SEAL AS
5.	118-0609 C	[1]	PISTON AS
5A.	118-0612	[2]	PLUNGER
5B.	118-0611	[4]	INSERT
6.	6E-3667	[1]	HEAD
7.	5M-0544	[6]	BOLT (1-1/8-7X4.5-IN)
8.	3S-1349	[6]	WASHER-HARD (31X52.5X6-MM THK)
9.	167-2216 C	[1]	SEAL AS-BUFFER
10.	167-2331 C	[1]	SEAL-U-CUP
11.	9T-9682	[1]	ROD AS
11A.	117-3006	[1]	BEARING
11B.	5L-4756	[2]	RING-RETAINING
12.	225-3287 C	[1]	SEAL-WIPER
13.	1U-3174	[1]	SEAL-O-RING
14.	158-3032 C	[1]	RING-BACKUP
15.	8T-6747	[1]	RING-WEAR
16.	107-0576 C	[2]	WASHER (85X120X4.76-MM THK)
17.	3B-8489 C	[1]	FITTING-GREASE (1/8-27 PTF)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370337

4T-5111: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

4T-5111 CYLINDER GP-RIPPER -LH
S/N 7LH1-99999; 7MH1-99999
235MM (9.25 IN.) BORE X 535MM (21 IN.) STROKE
PART OF 6I-8810, 6I-8811 RIPPER AR
AN ATTACHMENT

i00376760 SEBP2237

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-5114	[1]	CYLINDER AS
2.	3G-7624	[1]	BUSHING
3.	173-7756 C	[2]	WASHER (70.08X114X6.35-MM THK)
4.	7J-2087	[1]	RING-WEAR
5.	4T-4143 C	[1]	SEAL AS
6.	7J-4083	[1]	PISTON
7.	9J-6556	[1]	ROD AS-PISTON
8.	9J-6549	[1]	BUSHING
9.	4J-0520 C	[2]	SEAL-O-RING
	5H-4019 C	[2]	COVER
10.	8T-8383 C	[1]	SEAL-HEAD
11.	6E-6199 C	[1]	HEAD
12.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
13.	8T-6744	[1]	RING-WEAR
14.	8C-9121	[1]	SEAL AS
15.	5J-8325	[1]	SEAL-U-CUP
16.	8T-8389	[1]	SEAL-WIPER
17.	5P-8250	[6]	WASHER (28X49X5-MM THK)
	1D-4637	[6]	BOLT (1-8X3.25-IN)
18.	5S-7382 C	[8]	BOLT (3/8-16X1.375-IN)
	8T-4896 C	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
19.	1P-4577 C	[4]	FLANGE-HALF
20.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
21.	1U-3173 C	[1]	RING-BACKUP
22.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
23.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
24.	1U-3174 C	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370338

4T-5112: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

4T-5112 CYLINDER GP-RIPPER -RH
S/N 7LH1-99999; 7MH1-99999
235MM (9.25 IN.) BORE X 535MM (21 IN.) STROKE
PART OF 6I-8810, 6I-8811 RIPPER AR
AN ATTACHMENT

i00376763 SEBP2237

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
2.	7J-2087	[1]	RING-WEAR
3.	173-7756 C	[2]	WASHER (70.08X114X6.35-MM THK)
4.	4T-5114	[1]	CYLINDER AS
5.	3G-7624	[1]	BUSHING
6.	1U-3174 C	[1]	SEAL-O-RING
7.	1U-3173 C	[1]	RING-BACKUP
8.	9J-6556	[1]	ROD AS-PISTON
9.	9J-6549	[1]	BUSHING
10.	8T-8389	[1]	SEAL-WIPER
11.	5J-8325	[1]	SEAL-U-CUP
12.	8C-9121	[1]	SEAL AS
13.	6E-6199 C	[1]	HEAD
14.	1D-4637	[6]	BOLT (1-8X3.25-IN)
	5P-8250	[6]	WASHER (28X49X5-MM THK)
15.	7J-4083	[1]	PISTON
16.	4T-4143 C	[1]	SEAL AS
17.	4J-6888	[1]	LOCKNUT (2-3/4-12-THD)
18.	8T-6744	[1]	RING-WEAR
19.	8T-8383 C	[1]	SEAL-HEAD
20.	1P-4577 C	[4]	FLANGE-HALF
21.	4J-0520 C	[2]	SEAL-O-RING
	5H-4019 C	[2]	COVER
22.	5S-7382 C	[8]	BOLT (3/8-16X1.375-IN)
	8T-4896 C	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
23.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
24.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22370339

4T-9977: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

4T-9977 CYLINDER GP-RIPPER
S/N 7LH1-99999; 7MH1-99999
209.6-MM (8.25-IN) BORE X 660-MM (26-IN) STROKE
PART OF 6I-8810, 6I-8811 RIPPER AR
AN ATTACHMENT

i00377357 SEBP2237

For full view, you need register

Parts for your D10N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
2.	105-4172 C	[1]	PISTON
3.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
4.	8T-6745 J	[1]	RING-WEAR
5.	4J-7376 J	[1]	RING-WEAR
6.	5J-5559 J	[1]	SEAL AS
7.	119-8455 C	[2]	WASHER (57.3X100X6.35-MM THK)
8.	8J-4386 CJ	[1]	SEAL-O-RING
9.	3G-3747 CJ	[1]	RING-BACKUP
10.	1D-4631	[2]	BOLT (7/8-9X4.25-IN)
11.	5P-8249	[8]	WASHER-HARD (24X41.5X4-MM THK)
12.	105-4169 C	[1]	ROD AS
13.	3J-6484	[2]	BUSHING
	4J-4955	[1]	SPACER (3X100X5-MM THK)
14.	8T-8389 J	[1]	SEAL-WIPER
15.	5J-8325 J	[1]	SEAL-U-CUP
16.	8C-9121 J	[1]	SEAL AS
17.	1D-4627	[6]	BOLT (7/8-9X3-IN)
18.	100-9965 C	[1]	HEAD
19.	9T-0085	[1]	CYLINDER AS
20.	3J-6484	[2]	BUSHING
21.	4J-4955	[1]	SPACER (3X100X5-MM THK)
22.	8T-8382 CJ	[1]	SEAL-HEAD
23.	2H-3755 C	[4]	BOLT (5/16-18X0.43-IN)
	7S-6369 C	[4]	WASHER (0.344X0.75X0.188-IN THK)
24.	1P-4577 C	[4]	FLANGE-HALF
25.	5S-7382 C	[8]	BOLT (3/8-16X1.375-IN)
26.	8T-4896 C	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
27.	5H-4019 C	[2]	COVER
	4J-0520 C	[2]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	7X-2715 CJ	[1]	KIT-HYDRAULIC CYLINDER SEAL
			(INCLUDES SEAL-O RING & RING-BACK UP)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J ALSO INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE