AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8Y-8248 HYDRAULIC AR S/N 6SL1-UP; 7XL1-UP; 9TS1-UP PART OF 138-7068, 8Y-8150, 8Y-8151 GENERAL AR D3C III


HYDRAULIC SYSTEM
HYDRAULIC GP
LINES GP-CYLINDER
LINES GP-HYDRAULIC
LINES GP-PUMP

TRACK-TYPE TRACTOR D3C III TRACK-TYPE TRACTOR 6SL
 D3C & D3C LGP,XL Series III Tractors Power Shift 6SL00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2241 D3C III 6SL   (1993)

HYDRAULIC SYSTEM

HYDRAULIC GP
116-6382 HYDRAULIC AR
8Y-5065 HYDRAULIC AR
8Y-5068 HYDRAULIC AR
8Y-7126 HYDRAULIC AR
8Y-8248 HYDRAULIC AR
117-3532 HYDRAULIC AR-3 VALVE
 

#SEBP22410280
 

8Y-8248: HYDRAULIC AR

8Y-8248 HYDRAULIC AR
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 138-7068, 8Y-8150, 8Y-8151 GENERAL AR
i00746946 SEBP2241
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8Y-5053 Y [1] CONTROL GP-HYDRAULIC HAND  
  8Y-5054 Y [1] LINES GP-HYDRAULIC  
  111-3811 Y [1] LINES GP-PUMP  
  112-1173 Y [1] PUMP GP-GEAR (IMPLEMENT)  
    -OR-
  137-0300 Y [1] PUMP GP-GEAR (IMPLEMENT)  
  8Y-8205 Y [1] TANK & FILTER GP-HYDRAULIC  
  8Y-5055 Y [1] VALVE & MTG GP-CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22410281
 

117-3532: HYDRAULIC AR-3 VALVE

117-3532 HYDRAULIC AR-3 VALVE
S/N 6SL1-UP; 7XL1-UP
AN ATTACHMENT
i00198053 SEBP2241
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-3530 Y [1] CONTROL GP-HYDRAULIC HAND  
  5G-0543 Y [1] LINES GP-REAR ATTACHMENT  
  107-0408 Y [1] VALVE GP-BANK 3  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22410282
 

105-2789: LINES GP-ANGLE & TILT

105-2789 LINES GP-ANGLE & TILT
S/N 9RH1-UP; 8KP1-UP
PART OF 6I-9722 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00197965 SEBP2241
1052789 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0326 [4] BOLT (1/2-13X3-IN)  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
2. 6S-4663 I [4] HOSE AS  
3. 6S-4710 I [2] HOSE AS  
4. 005-4362 [4] ELBOW  
5. 3K-0360 [6] SEAL-O-RING  
6. 030-8144 [6] REDUCER-FLARED  
  1P-1441 [6] NUT-FLARED (3/4-16-THD)  
7. 6S-8021 [2] GUARD AS  
    (EACH INCLUDES)
  3S-3158 [2] PIPE  
8. 7B-1598 [2] CLIP  
9. 8E-2241 [1] TUBE AS  
10. 6S-8040 I [2] HOSE AS  
11. 6S-4728 [2] TUBE AS  
12. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
13. 4L-6454 [8] BOLT (3/8-16X1-IN)  
14. 5P-1075 [21] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 105-2787 [1] TUBE AS  
16. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
17. 105-2786 [1] TUBE AS  
18. 5M-3062 [7] BOLT (3/8-16X0.75-IN)  
19. 8T-2501 [4] BOLT (3/8-16X2-IN)  
20. 5G-0678 [1] GUARD AS  
21. 6S-6477 [1] GUARD  
22. 8E-5550 [2] CLIP  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 5G-0677 [1] GUARD AS  
25. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
26. 8E-5548 [1] GUARD AS  
27. 030-8188 [2] CONNECTOR  
28. 6S-9054 [1] TUBE AS  
29. 2V-0156 I [2] HOSE AS  
30. 6S-9052 [1] GUARD  
31. 6S-4733 [2] PLATE  
32. 6S-8237 [1] PLATE  
33. 6S-8238 [1] PLATE  
34. 6S-8236 [2] PLATE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410283
 

138-7491: LINES GP-ANGLE & TILT

138-7491 LINES GP-ANGLE & TILT
S/N 8HP1-UP
PART OF 138-7488 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00511389 SEBP2241
1387491 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-4733 [2] PLATE  
2. 6S-6477 [1] GUARD  
3. 6S-8236 [2] PLATE  
4. 6S-9052 [1] GUARD  
5. 8T-1885 [2] CLIP (SLOT)  
6. 8T-1886 [2] CLIP (TAB)  
7. 140-2876 I [4] HOSE AS  
8. 140-3097 [1] TUBE AS  
9. 140-5918 [1] TUBE AS  
10. 140-6251 [1] TUBE AS  
11. 140-6324 [2] TUBE AS  
12. 140-6352 [1] TUBE AS  
13. 140-7517 I [2] HOSE AS  
14. 140-7539 [1] TUBE AS  
15. 140-7865 [1] TUBE AS  
16. 140-8415 [1] TUBE AS  
17. 141-4903 [1] COVER AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
18. 141-7922 [1] COVER AS  
19. 141-9927 [2] CLIP  
20. 141-9928 I [2] HOSE AS  
21. 142-0114 I [2] HOSE AS  
22. 142-0420 [1] TUBE AS  
23. 142-0443 I [2] HOSE AS  
24. 142-0761 [1] COVER AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
25. 142-1459 [1] COVER AS  
26. 142-2449 [1] COVER AS  
27. 145-3348 [2] GUARD AS  
  3S-3158 [2] PIPE  
28. 3K-0360 [6] SEAL-O-RING  
29. 4L-6454 [6] BOLT (3/8-16X1-IN)  
30. 5M-3062 [6] BOLT (3/8-16X0.75-IN)  
31. 5P-1075 [24] WASHER-HARD (10.2X22.5X3-MM THK)  
32. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
33. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
34. 6V-8397 [24] SEAL-O-RING  
35. 6V-8398 [14] SEAL-O-RING  
36. 6V-8634 [2] CONNECTOR  
37. 6V-8723 [4] ELBOW  
38. 6V-8936 [8] REDUCER  
39. 6V-8994 [1] UNION (STRAIGHT)  
40. 6V-8995 [3] UNION (STRAIGHT)  
41. 6V-9168 [1] NUT (11/16-16-THD)  
42. 6V-9169 [3] NUT (13/16-16-THD)  
43. 6V-9836 [2] TEE-SWIVEL  
44. 7X-0326 [4] BOLT (1/2-13X3-IN)  
45. 8T-2501 [4] BOLT (3/8-16X2-IN)  
46. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410284
 

139-4622: LINES GP-ANGLE & TILT

139-4622 LINES GP-ANGLE & TILT
S/N 6EH1-UP
PART OF 117-4575 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00496196 SEBP2241
1394622 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
2. 5G-0682 I [4] HOSE AS  
3. 6I-8065 I [2] HOSE AS  
4. 005-4362 [4] ELBOW  
5. 3K-0360 [6] SEAL-O-RING  
6. 7X-0326 [4] BOLT (1/2-13X3-IN)  
7. 6S-8021 [2] GUARD AS  
    (EACH INCLUDES)
  3S-3158 [2] PIPE  
8. 7B-1598 [2] CLIP  
9. 8E-7337 [1] TUBE AS  
10. 6S-8040 I [2] HOSE AS  
11. 6S-4728 [2] TUBE AS  
12. 2V-0156 I [2] HOSE AS  
13. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
14. 6S-9052 [1] GUARD  
15. 030-8188 [2] CONNECTOR  
16. 8T-2501 [4] BOLT (3/8-16X2-IN)  
17. 6S-9054 [1] TUBE AS  
18. 5M-3062 [7] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [17] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 139-4623 [1] TUBE AS  
21. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
22. 8E-9992 [1] GUARD AS  
23. 139-4624 [1] TUBE AS  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 4L-6454 [4] BOLT (3/8-16X1-IN)  
26. 6S-6477 [1] GUARD  
27. 1P-1441 [6] NUT-FLARED (3/4-16-THD)  
28. 8E-9998 [1] GUARD AS  
29. 8E-7559 [1] GUARD AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
30. 8E-5550 [2] CLIP  
31. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
32. 6S-8236 [2] PLATE  
33. 030-8144 [6] REDUCER-FLARED  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410285
 

139-7729: LINES GP-ANGLE & TILT

139-7729 LINES GP-ANGLE & TILT
S/N 8JP1-UP; 8KP1-UP
PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727, 139-7733 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00496735 SEBP2241
1397729 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-6477 [1] GUARD  
2. 6S-8236 [2] PLATE  
3. 6S-9052 [1] GUARD  
4. 8T-1885 [2] CLIP (SLOT)  
5. 8T-1886 [2] CLIP (TAB)  
6. 140-5918 [1] TUBE AS  
7. 140-6324 [2] TUBE AS  
8. 141-7922 [1] COVER AS  
9. 141-9927 [2] CLIP  
10. 142-0114 I [2] HOSE AS  
11. 142-0420 [1] TUBE AS  
12. 142-0443 I [2] HOSE AS  
13. 143-4706 I [4] HOSE AS  
14. 143-5038 [1] TUBE AS  
15. 143-5252 [1] TUBE AS  
16. 143-5367 [1] TUBE AS  
17. 143-5370 [1] TUBE AS  
18. 143-7291 [1] COVER AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
19. 143-7715 [1] COVER AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  8R-5144 [2] WASHER (12X30X9-MM THK)  
20. 143-7781 [1] COVER AS  
21. 143-7836 [1] COVER AS  
22. 144-1232 I [2] HOSE AS  
23. 144-5739 I [2] HOSE AS  
24. 145-3348 [2] GUARD AS  
25. 145-9098 [1] TUBE AS  
26. 145-9143 [1] TUBE AS  
27. 3K-0360 [6] SEAL-O-RING  
28. 4L-6454 [2] BOLT (3/8-16X1-IN)  
29. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
30. 5P-1075 [20] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
32. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
33. 6V-8397 [24] SEAL-O-RING  
34. 6V-8398 [14] SEAL-O-RING  
35. 6V-8634 [2] CONNECTOR  
36. 6V-8723 [4] ELBOW  
37. 6V-8936 [8] REDUCER  
38. 6V-8994 [1] UNION (STRAIGHT)  
39. 6V-8995 [3] UNION (STRAIGHT)  
40. 6V-9168 [1] NUT (11/16-16-THD)  
41. 6V-9169 [3] NUT (13/16-16-THD)  
42. 6V-9836 [2] TEE-SWIVEL  
43. 7X-0326 [4] BOLT (1/2-13X3-IN)  
44. 8T-2501 [4] BOLT (3/8-16X2-IN)  
45. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410286
 

8E-4278: LINES GP-ANGLE & TILT

8E-4278 LINES GP-ANGLE & TILT
S/N 5WH1-UP; 6EH1-UP
PART OF 8E-4080 BULLDOZER AR-ANGLING, 106-9294 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00197304 SEBP2241
8E4278 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0326 [4] BOLT (1/2-13X3-IN)  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
2. 5G-0682 I [4] HOSE AS  
3. 5G-0683 I [2] HOSE AS  
4. 005-4362 [4] ELBOW  
5. 3K-0360 [6] SEAL-O-RING  
6. 030-8144 [6] REDUCER-FLARED  
  1P-1441 [6] NUT-FLARED (3/4-16-THD)  
7. 6S-8021 [2] GUARD AS  
    (EACH INCLUDES)
  3S-3158 [2] PIPE  
8. 7B-1598 [2] CLIP  
9. 8E-2241 [1] TUBE AS  
10. 6S-8040 I [2] HOSE AS  
11. 6S-4728 [2] TUBE AS  
12. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
13. 4L-6454 [4] BOLT (3/8-16X1-IN)  
14. 5P-1075 [17] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 8E-5697 [1] TUBE AS  
16. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
17. 8E-2243 [1] TUBE AS  
18. 5M-3062 [7] BOLT (3/8-16X0.75-IN)  
19. 8T-2501 [4] BOLT (3/8-16X2-IN)  
  6S-8236 [2] PLATE  
20. 5G-0678 [1] GUARD AS  
21. 6S-6477 [1] GUARD  
22. 8E-5550 [2] CLIP  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 5G-0677 [1] GUARD AS  
25. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
26. 8E-5548 [1] GUARD AS  
27. 030-8188 [2] CONNECTOR  
28. 6S-9054 [1] TUBE AS  
29. 2V-0156 I [2] HOSE AS  
30. 6S-9052 [1] GUARD  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410287
 

8E-4279: LINES GP-ANGLE & TILT

8E-4279 LINES GP-ANGLE & TILT
S/N 6EH1-UP
PART OF 106-9294 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00197347 SEBP2241
8E4279 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0326 [4] BOLT (1/2-13X3-IN)  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
2. 5G-0682 I [4] HOSE AS  
3. 6S-4710 I [2] HOSE AS  
4. 005-4362 [4] ELBOW  
5. 3K-0360 [6] SEAL-O-RING  
6. 030-8144 [6] REDUCER-FLARED  
  1P-1441 [6] NUT-FLARED (3/4-16-THD)  
7. 6S-8021 [2] GUARD AS  
    (EACH INCLUDES)
  3S-3158 [2] PIPE  
8. 7B-1598 [2] CLIP  
9. 8E-2241 [1] TUBE AS  
10. 6S-8040 I [2] HOSE AS  
11. 6S-4728 [2] TUBE AS  
12. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
13. 4L-6454 [2] BOLT (3/8-16X1-IN)  
14. 5P-1075 [17] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 8E-2242 [1] TUBE AS  
16. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
17. 8E-5699 [1] TUBE AS  
18. 5M-3062 [7] BOLT (3/8-16X0.75-IN)  
19. 8T-2501 [4] BOLT (3/8-16X2-IN)  
  6S-8236 [2] PLATE  
20. 5G-0678 [1] GUARD AS  
21. 6S-6477 [1] GUARD  
22. 8E-5550 [2] CLIP  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 5G-0677 [1] GUARD AS  
25. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
26. 8E-5548 [1] GUARD AS  
27. 030-8188 [2] CONNECTOR  
28. 6S-9054 [1] TUBE AS  
29. 2V-0156 I [2] HOSE AS  
30. 6S-9052 [1] GUARD  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410288
 

8Y-5054: LINES GP-HYDRAULIC

8Y-5054 LINES GP-HYDRAULIC
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
3 CIRCUITS
PART OF 8Y-8248 HYDRAULIC AR
i00197137 SEBP2241
8Y5054 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4129 [5] UNION-FLARED  
2. 1F-7567 [1] CLIP  
3. 5G-1058 [2] TUBE AS  
4. 8Y-7012 [1] TUBE AS  
5. 030-7942 [4] ELBOW  
6. 3J-1907 [9] SEAL-O-RING  
7. 5P-1075 [5] WASHER-HARD (10.2X22.5X3-MM THK)  
8. 2M-9780 [6] SEAL-O-RING  
9. 030-8194 [3] CONNECTOR  
10. 5P-1404 [1] ADAPTER  
11. 2P-7214 [1] ELBOW  
12. 8Y-1511 [1] TUBE AS  
13. 5G-2246 [1] SPACER  
14. 9S-1310 [2] CLIP  
15. 8T-9389 [1] BOLT (1/2-13X2.75-IN)  
16. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8S-8820 [3] CLIP  
18. 6V-8636 [4] CONNECTOR  
19. 6S-4709 [2] BLOCK AS (9/16-18 STR THD)  
20. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
21. 8Y-7109 I [1] HOSE AS  
22. 8Y-7110 I [1] HOSE AS  
23. 5P-2228 [1] BOLT (1/2-13X1-IN)  
24. 4K-8302 [3] CLIP (LOOP)  
25. 9M-4584 [2] CONNECTOR  
26. 8Y-7015 [1] TUBE AS  
27. 8Y-1656 [1] TUBE AS  
28. 8Y-1655 [1] TUBE AS  
29. 8Y-6800 [1] TUBE AS  
30. 5K-2697 [2] CLIP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
33. 8Y-6799 [1] TUBE AS  
34. 003-8581 [2] TEE-UNION  
35. 068-7366 I [1] HOSE AS  
36. 5P-5148 [3] STRAP-CABLE  
37. 5P-8228 [2] REDUCER-FLARED  
38. 5G-1791 I [1] HOSE AS  
39. 6K-9194 [1] ELBOW-FLARED  
40. 8Y-7013 [1] TUBE AS  
41. 5M-5687 [2] CLIP  
42. 8Y-7014 [1] TUBE AS  
43. 8Y-1568 [1] TUBE AS  
44. 5G-1053 [2] TUBE AS  
45. 5M-3062 [5] BOLT (3/8-16X0.75-IN)  
46. 8Y-7001 [1] PLATE AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  1K-3357 [1] SPACER  
47. 8F-8513 [1] CLIP  
48. 6V-8918 [1] BOLT (5/16-18X1.25-IN)  
49. 3B-4505 [1] LOCKWASHER  
50. 031-4155 [1] LOCKNUT (5/16-18-THD)  
51. 5C-6565 [1] BOLT (1/2-13X1.125-IN)  
52. 9X-8250 [2] CLIP  
53. 8M-0505 [4] ADAPTER  
54. 3K-0360 [4] SEAL-O-RING  
55. 6V-8397 [4] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22410289
 

111-3811: LINES GP-PUMP

111-3811 LINES GP-PUMP
S/N 6SL1-1567; 7XL1-651
PART OF 8Y-8248 HYDRAULIC AR
i00198041 SEBP2241
1113811 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-1831 I [1] HOSE AS  
2. 114-6575 [1] CONNECTOR  
3. 2R-6276 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
4. 103-1830 [1] TUBE AS  
5. 103-4659 [1] BRACKET AS  
  9F-2978 [2] NUT-WELD (3/8-16-THD)  
  7T-1099 [1] LINK  
6. 111-3809 [1] TUBE AS  
7. 030-8196 [1] CONNECTOR  
8. 111-3808 [1] TUBE AS  
9. 7M-8485 [3] SEAL-O-RING  
10. 034-0728 [2] CLIP  
11. 8T-1890 [1] CLIP (TAB)  
  8T-1889 [1] CLIP (SLOT)  
12. 5P-8167 [3] BOLT (3/8-16X0.625-IN)  
  8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 5P-4250 [1] ELBOW (SWIVEL)  
14. 5P-6412 E HOSE (43 CM)  
15. 5P-0597 [2] CLAMP-HOSE  
16. 8C-6877 [2] BOLT (7/16-14X1.75-IN)  
17. 7X-0312 [2] BOLT (7/16-14X2.5-IN)  
18. 4J-0522 [1] SEAL-O-RING  
19. 4S-6680 [1] CONNECTOR  
20. 3R-9704 [1] ELBOW  
21. 8Y-2414 [1] TUBE AS  
22. 2M-9780 [1] SEAL-O-RING  
  114-6566 [1] CONNECTOR  
23. 8T-3613 [1] FITTING  
  6V-0852 [1] CAP-DUST  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Caterpillar Parts SIS Catalog D3C III :

8Y-7126 HYDRAULIC AR
8Y-5068 HYDRAULIC AR
8Y-5065 HYDRAULIC AR
116-6382 HYDRAULIC AR
CYLINDER GP-TILT
9J-8674 CYLINDER GP-TILT
CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
CYLINDER GP-RIPPER
7J-9920 CYLINDER GP-RIPPER
117-3532 HYDRAULIC AR-3 VALVE
LINES GP-ANGLE & TILT
105-2789 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
138-7491 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
139-4622 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
139-7729 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
8E-4278 LINES GP-ANGLE & TILT
LINES GP-ANGLE & TILT
8E-4279 LINES GP-ANGLE & TILT
LINES GP-HYDRAULIC
8Y-5054 LINES GP-HYDRAULIC

Truck sale:

 
15,901 
Caterpillar D3CIIILGP, Construction
- Dozers
MICHIGAN CAT
Caterpillar D3CIIIXL, Construction
34,200 
Caterpillar D3CIIIXL, Construction
- Dozers
FOLEY EQUIPMENT COMPANY
 
 
CATERPILLAR D3CIII 1996
- TRACK TYPE TRACTORS
CARTER MACHINERY
United States
CATERPILLAR D3CIII 1997
 
CATERPILLAR D3CIII 1997
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D3CIII 2000
 
CATERPILLAR D3CIII 2000
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.