138-7488 BULLDOZER AR-PWR ANGLE & TILT S/N 8HP1-UP POWER ANGLE & TILT AN ATTACHMENT D3C III TRACK-TYPE TRACTOR

Part No	Qty	Parts name
138-7489 Y	[1]	BLADE GP-ANGLING
138-7490 Y	[1]	C-FRAME GP-POWER ANGLING
138-6859 Y	[2]	CYLINDER GP-ANGLING
7J-9223 Y	[2]	CYLINDER GP-BULLDOZER LIFT
		-OR-
141-2915 Y	[2]	CYLINDER GP-BULLDOZER LIFT
9J-8674 Y	[1]	CYLINDER GP-TILT
		-OR-
143-7219 Y	[1]	CYLINDER GP-TILT
138-7491 Y	[1]	LINES GP-ANGLE & TILT
138-7492 Y	[1]	LINK GP-PITCH
		-OR-
150-5131 Y	[1]	LINK GP-PITCH
		-OR-
CY	[1]	LINK GP-PITCH
138-1961 Y	[1]	MOUNTING GP-TRUNNION
	[1]	FILM-IDENTIFICATION (BULLDOZER)
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

#SEBP22410341

139-7727: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

139-7727 BULLDOZER AR-PWR ANGLE & TILT
S/N 8KP1-UP
POWER ANGLE & TILT
AN ATTACHMENT

i01090304 SEBP2241

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
139-7728 Y	[1]	BLADE GP-ANGLING
139-7730 Y	[1]	C-FRAME GP-POWER ANGLING
139-0548 Y	[1]	CYLINDER GP-ANGLING
		-OR-
169-9527 Y	[2]	CYLINDER GP-ANGLING
141-2915 Y	[2]	CYLINDER GP-BULLDOZER LIFT
143-7219 Y	[1]	CYLINDER GP-TILT
139-7729 Y	[1]	LINES GP-ANGLE & TILT
150-5131 Y	[1]	LINK GP-PITCH
	[1]	LITERATURE GP
138-1961 Y	[1]	MOUNTING GP-TRUNNION
Y	[1]	PLATE & FILM GP
Y		SEPARATE ILLUSTRATION

#SEBP22410342

139-7733: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

139-7733 BULLDOZER AR-PWR ANGLE & TILT
S/N 8JP1-UP
POWER ANGLE & TILT
AN ATTACHMENT

i00496739 SEBP2241

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
141-6052 Y	[1]	BLADE GP-ANGLING
139-7730 Y	[1]	C-FRAME GP-POWER ANGLING
139-0548 Y	[2]	CYLINDER GP-ANGLING
7J-9223 Y	[2]	CYLINDER GP-BULLDOZER LIFT
		(TYPE 1)
		-OR-
141-2915 Y	[2]	CYLINDER GP-BULLDOZER LIFT
		(TYPE 2)
9J-8674 Y	[1]	CYLINDER GP-TILT
		(TYPE 1)
		-OR-
143-7219 Y	[1]	CYLINDER GP-TILT
		(TYPE 2)
139-7729 Y	[1]	LINES GP-ANGLE & TILT
138-7492 Y	[1]	LINK GP-PITCH
138-1961 Y	[1]	MOUNTING GP-TRUNNION
Y		SEPARATE ILLUSTRATION

#SEBP22410343

6I-9722: BULLDOZER AR-PWR ANGLE & TILT

BULLDOZER AR-PWR ANGLE & TILT

6I-9722 BULLDOZER AR-PWR ANGLE & TILT
S/N 9RH1-UP; 8KP1-UP
POWER ANGLE & TILT
AN ATTACHMENT

i00197886 SEBP2241

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6I-9720 Y	[1]	BLADE GP-ANGLING
6I-9721 Y	[1]	C-FRAME GP-POWER ANGLING
102-6237 Y	[2]	CYLINDER GP-ANGLING
		-OR-
136-3155 Y	[2]	CYLINDER GP-ANGLING
7J-9223 Y	[2]	CYLINDER GP-BULLDOZER LIFT
9J-8674 Y	[1]	CYLINDER GP-TILT
	[1]	FILM-IDENTIFICATION (BULLDOZER)
105-2789 Y	[1]	LINES GP-ANGLE & TILT
8E-4276 Y	[1]	MOUNTING GP-CYLINDER LINES
5G-0269 Y	[1]	MOUNTING GP-TRUNNION
Y		SEPARATE ILLUSTRATION

#SEBP22410344

138-4963: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

138-4963 C-FRAME GP-POWER ANGLING
S/N 6EH1-UP
PART OF 117-4575 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00510287 SEBP2241

1384963 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-4026	[2]	PIN AS
2.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
3.	8E-4072	[4]	SPACER (13.8X23.75X16-MM THK)
4.	8T-2502	[5]	BOLT (3/8-16X1.125-IN)
5.	8J-0927	[4]	PIN
6.	8J-0729	[5]	RETAINER
7.	8J-3349	[4]	SPACER (14-MM THK)
8.	8J-0928	[1]	PIN
9.	8J-3344	[2]	SPACER (20.8-MM THK)
10.	3G-2569	[1]	CAP-BEARING
11.	7X-0391	[4]	BOLT (7/8-9X5.5-IN)
12.	8E-5702 B	[26]	SHIM (0.8-MM THK)
13.	138-4964	[1]	C-FRAME AS
14.	4D-9376	[5]	BOSS (3/8-16-THD)
15.	6M-4016	[6]	LUG
16.	8J-3372	[1]	BRACKET AS
	1U-2956	[2]	BEARING
	8P-9770	[1]	PLATE
	6L-1649	[1]	SEAL-O-RING
	8E-8842	[1]	BRACKET & BEARING AS
	3G-2569	[1]	CAP-BEARING
	061-6712	[1]	RING-RETAINING
17.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
18.	8E-3308 B	[2]	SPACER (25-MM THK)
19.	8E-3315 B	[2]	SPACER (12-MM THK)
20.	8J-1148	[4]	BOLT (3/4-10X4.5-IN)
	B		USE AS REQUIRED

#SEBP22410345

138-7490: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

138-7490 C-FRAME GP-POWER ANGLING
S/N 8HP1-UP
PART OF 138-7488 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00511388 SEBP2241

1387490 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-2569	[1]	CAP-BEARING
2.	8E-4026	[2]	PIN AS
3.	8E-4072	[4]	SPACER (13.8X23.75X16-MM THK)
4.	8E-5702 B	[26]	SHIM (0.8-MM THK)
5.	8J-0729	[5]	RETAINER
6.	8J-0927	[4]	PIN
7.	8J-0928	[1]	PIN
8.	150-0351	[2]	SPACER (38.3X44.45X20.8-MM THK)
9.	150-0353	[4]	SPACER (38.3X44.45X14-MM THK)
10.	139-6790	[1]	FRAME AS
11.	1U-2956	[2]	BEARING
12.	5B-8855	[2]	PLATE-SCREW
13.	6M-4016	[4]	LUG
	1F-0750	[4]	NUT-WELD (3/8-16-THD)
	8P-9770	[1]	PLATE
14.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
15.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
16.	7X-0391	[4]	BOLT (7/8-9X5.5-IN)
17.	8T-2502	[5]	BOLT (3/8-16X1.125-IN)
	B		USE AS REQUIRED

#SEBP22410346

139-7730: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

139-7730 C-FRAME GP-POWER ANGLING -ANGLING
S/N 8JP1-UP; 8KP1-UP
PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727, 139-7733 BULLDOZER AR-PWR ANGLE & TILT
Type 1
AN ATTACHMENT

i00496736 SEBP2241

1397730 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-2569	[1]	CAP-BEARING
2.	8E-4026	[2]	PIN AS
3.	8E-4072	[4]	SPACER (13.8X23.75X16-MM THK)
4.	8E-5702 B	[26]	SHIM (0.8-MM THK)
5.	8J-0729	[5]	RETAINER
6.	8J-0927	[4]	PIN
7.	8J-0928	[1]	PIN
8.	150-0351	[2]	SPACER (38.3X44.45X20.8-MM THK)
9.	150-0353	[4]	SPACER (38.3X44.45X14-MM THK)
10.	140-2780	[1]	FRAME AS
10A.	4D-9376	[2]	BOSS (3/8-16-THD)
10B.	6M-4016	[4]	LUG
10C.	8P-9770	[1]	PLATE
10D.	8J-3443	[2]	BEARING
10E.	145-8837	[1]	BRACKET AS
	3G-2569	[1]	CAP-BEARING
11.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
12.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
13.	7X-0391	[4]	BOLT (7/8-9X5.5-IN)
14.	8T-2502	[5]	BOLT (3/8-16X1.125-IN)
	B		USE AS REQUIRED

#SEBP22410347

139-7730: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

139-7730 C-FRAME GP-POWER ANGLING -ANGLING
S/N 8JP1-UP; 8KP1-UP
PART OF 142-5878 BULLDOZER AR-ANGLING, 139-7727 BULLDOZER AR-PWR ANGLE & TILT
Type 2
AN ATTACHMENT

i01154539 SEBP2241

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-2569	[1]	CAP-BEARING
2.	8E-4026	[2]	PIN AS
3.	8E-4072	[4]	SPACER (13.8X23.75X16-MM THK)
4.	8E-5702 B	[26]	SHIM (0.8-MM THK)
5.	8J-0729	[1]	RETAINER
6.	8J-0928	[1]	PIN
7.	140-2780	[1]	FRAME AS
	8J-3443	[2]	BEARING
	145-8837	[1]	BRACKET AS
	3G-2569	[1]	CAP-BEARING
	8E-5702 B	[14]	SHIM (0.8-MM THK)
	4D-9376	[6]	BOSS (3/8-16-THD)
	5P-2228	[8]	BOLT (1/2-13X1-IN)
	6M-4016	[6]	LUG
	8E-5702 B	[28]	SHIM (0.8-MM THK)
	8P-9770	[1]	PLATE
	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	150-3806	[2]	PIN
	170-6631	[4]	BAR
	170-6632	[2]	PIN
8.	150-0351	[2]	SPACER (38.3X44.45X20.8-MM THK)
9.	150-0353	[4]	SPACER (38.3X44.45X14-MM THK)
10.	150-3806	[2]	PIN
11.	170-6631	[4]	BAR
12.	170-6632	[2]	PIN
13.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
14.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
15.	7X-0391	[4]	BOLT (7/8-9X5.5-IN)
16.	8T-2502	[1]	BOLT (3/8-16X1.125-IN)
17.	5P-2228	[8]	BOLT (1/2-13X1-IN)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	B		USE AS REQUIRED

#SEBP22410348

3G-3440: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

3G-3440 C-FRAME GP-POWER ANGLING
S/N 5WH1-UP; 6EH1-UP
PART OF 8E-4080 BULLDOZER AR-ANGLING, 106-9294 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00197290 SEBP2241

3G3440 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1076 C	[4]	WASHER-HARD (13.5X30X4-MM THK)
	8E-4072 C	[4]	SPACER (13.8X23.75X16-MM THK)
2.	5P-2566 C	[4]	BOLT (1/2-13X1.5-IN)
3.	8E-4026 C	[2]	PIN AS
4.	150-0353	[4]	SPACER (38.3X44.45X14-MM THK)
5.	8J-0927	[4]	PIN
6.	120-4792	[1]	C-FRAME AS
	8E-5701 B	[14]	SHIM (0.8-MM THK)
6A.	6L-1649	[1]	SEAL-O-RING
6B.	8E-8842	[1]	BRACKET & BEARING AS
6C.	3G-2569	[1]	CAP-BEARING
6D.	061-6712	[1]	RING-RETAINING
7.	6M-4016	[6]	LUG
8.	4D-9376	[5]	BOSS (3/8-16-THD)
9.	8J-3372	[1]	BRACKET AS
10.	8J-3443	[2]	BEARING
11.	8P-9770	[1]	PLATE
12.	117-4635 C	[1]	PLATE AS
13.	8J-1148 C	[4]	BOLT (3/4-10X4.5-IN)
14.	8J-0928	[1]	PIN
15.	150-0351	[2]	SPACER (38.3X44.45X20.8-MM THK)
16.	3G-2569	[1]	CAP-BEARING
	8E-5702 B	[26]	SHIM (0.8-MM THK)
17.	1D-4634	[4]	BOLT (7/8-9X5.5-IN)
18.	1A-2029	[5]	BOLT (3/8-16X1.125-IN)
19.	8J-0729	[5]	RETAINER
20.	8E-3308 BC	[2]	SPACER (25-MM THK)
	8E-3315 BC	[2]	SPACER (12-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP22410349

6I-9721: C-FRAME GP-POWER ANGLING

C-FRAME GP-POWER ANGLING

6I-9721 C-FRAME GP-POWER ANGLING
S/N 9RH1-UP
PART OF 6I-9722 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i00197883 SEBP2241

6I9721 C-FRAME GP-POWER ANGLING Parts scheme

For full view, you need register

Parts for your D3C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
	8E-4072	[4]	SPACER (13.8X23.75X16-MM THK)
2.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
3.	8E-4026	[2]	PIN AS
4.	8J-3349	[4]	SPACER (14-MM THK)
5.	8J-0927	[4]	PIN
6.	6I-9826	[1]	C-FRAME AS
7.	6M-4016	[6]	LUG
8.	8J-3372	[1]	BRACKET AS
9.	4D-9376	[3]	BOSS (3/8-16-THD)
10.	5B-8855	[2]	PLATE-SCREW
11.	1U-2956	[2]	BEARING
12.	8E-5099	[1]	PLATE AS
13.	8E-3315 B	[2]	SPACER (12-MM THK)
14.	8T-9311	[4]	BOLT (3/4-10X4.5-IN)
15.	8E-3308 B	[2]	SPACER (25-MM THK)
16.	1A-2029	[5]	BOLT (3/8-16X1.125-IN)
17.	8J-0729	[5]	RETAINER
18.	1D-4634	[4]	BOLT (7/8-9X5.5-IN)
19.	8E-5702 B	[26]	SHIM (0.8-MM THK)
20.	8J-0928	[1]	PIN
21.	8J-3344	[2]	SPACER (20.8-MM THK)
22.	3G-2569	[1]	CAP-BEARING
	B		USE AS REQUIRED