OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP
PANEL GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP22410380
116-7616: CONTROL GP-HYDRAULIC HAND
116-7616 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP
PART OF 116-6382 HYDRAULIC AR
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP
PART OF 116-6382 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-7112 | [1] | LEVER AS | |
| 1B-6182 | [1] | SPACER (13.11X19.05X1.18-MM THK) | ||
| 2. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 3. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 3D-8752 | [3] | LOCKNUT (5/16-24-THD) | |
| 5. | 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | |
| 6. | 3D-9609 | [1] | ROD END | |
| 7. | 3B-4610 | [1] | PIN-COTTER | |
| 8. | 0L-1170 | [1] | HANDLE-LEVER | |
| 9. | 8K-1255 | [1] | PIN | |
| 10. | 4H-1641 | [1] | PIN-SPRING | |
| 11. | 8Y-7113 | [1] | LEVER AS | |
| 5P-1075 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 12. | 8Y-0559 | [1] | ROD | |
| 13. | 9K-8757 | [1] | ROD END | |
| 14. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 4B-9883 | [1] | BOLT (5/16-24X0.875-IN) | |
| 16. | 4Y-9501 | [1] | LINK | |
| 17. | 6S-4084 | [1] | FILM-INSTRUCTION |
#SEBP22410381
117-3530: CONTROL GP-HYDRAULIC HAND
117-3530 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP
PART OF 117-3532 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP
PART OF 117-3532 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9K-1549 | [1] | ROD | |
| 2. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 3. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 3D-8752 | [2] | LOCKNUT (5/16-24-THD) | |
| 5. | 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | |
| 6. | 3D-9609 | [1] | ROD END | |
| 7. | 3B-4609 | [1] | PIN-COTTER | |
| 8. | 0L-1170 | [1] | HANDLE-LEVER | |
| 9. | 8K-1255 | [1] | PIN | |
| 10. | 4H-8380 | [2] | PIN-SPRING | |
| 11. | 5G-1825 | [1] | LEVER AS | |
| 12. | 5G-0433 | [1] | LEVER AS | |
| 1B-6182 | [1] | SPACER (13.11X19.05X1.18-MM THK) | ||
| 13. | 9K-8757 | [1] | ROD END | |
| 14. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 4B-9883 | [1] | BOLT (5/16-24X0.875-IN) | |
| 16. | 4Y-9501 | [1] | LINK | |
| 17. | 6S-4084 | [1] | FILM-INSTRUCTION | |
| 18. | 2F-8616 | [1] | NUT-SELF LOCKING (3/8-24-THD) |
#SEBP22410382
8Y-0639: CONTROL GP-HYDRAULIC HAND
8Y-0639 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
RIPPER
PART OF 8Y-5065 HYDRAULIC AR
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
RIPPER
PART OF 8Y-5065 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6S-4084 | [1] | FILM-INSTRUCTION | |
| 2. | 8Y-0698 | [1] | LEVER AS (RIPPER) | |
| 1B-6182 | [1] | SPACER (13.11X19.05X1.18-MM THK) | ||
| 3. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 4. | 3B-4610 | [1] | PIN-COTTER | |
| 5. | 3D-9609 | [1] | ROD END | |
| 6. | 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | |
| 7. | 3D-8752 | [1] | LOCKNUT (5/16-24-THD) | |
| 8. | 9K-8757 | [1] | ROD END | |
| 9. | 8Y-0559 | [1] | ROD | |
| 10. | 5G-1825 | [1] | LEVER AS | |
| 11. | 4H-8380 | [2] | PIN-SPRING | |
| 12. | 8K-1255 | [1] | PIN | |
| 13. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 14. | 0L-1170 | [1] | HANDLE-LEVER |
#SEBP22410383
8Y-4983: CONTROL GP-HYDRAULIC HAND
8Y-4983 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1170 | [1] | HANDLE-LEVER (BLADE TILT) | |
| 2. | 135-3195 | [1] | ROD AS | |
| 3. | 4L-6454 C | [2] | BOLT (3/8-16X1-IN) | |
| 4. | 6S-4789 | [2] | SUPPORT AS | |
| (EACH INCLUDES) | ||||
| 6K-3030 | [1] | BUSHING | ||
| 5. | 8T-9043 | [4] | BOLT (5/16-18X0.875-IN) | |
| 6. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 6S-4792 | [1] | LEVER | |
| 8. | 6V-5782 | [2] | BOLT (5/16-18X1.125-IN) | |
| 9. | 3D-8752 | [3] | LOCKNUT (5/16-24-THD) | |
| 10. | 7H-3641 | [2] | END-ROD (5/16-24-THD) | |
| 11. | 5M-5479 | [1] | ROD | |
| 12. | 7X-3376 | [6] | NUT-FULL (5/16-24-THD) | |
| 13. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 14. | 5G-3138 | [1] | LEVER AS | |
| 5G-0400 | [2] | BEARING | ||
| 15. | 7X-2501 | [1] | BOLT (1/4-20X1.25-IN) | |
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 2D-6235 | [1] | LOCKNUT (1/4-20-THD) | ||
| 16. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 17. | 9K-8757 | [3] | ROD END | |
| 18. | 2H-2292 | [1] | ROD-ADJUSTMENT | |
| 19. | 1W-1180 | [1] | ROD | |
| 20. | 8T-2502 | [2] | BOLT (3/8-16X1.125-IN) | |
| 21. | 5G-0419 | [1] | LEVER AS | |
| 5G-0400 | [2] | BEARING | ||
| 22. | 8T-4896 C | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 23. | 5G-0278 | [1] | SHAFT | |
| 24. | 5G-0399 | [1] | SHAFT | |
| 25. | 3D-9609 | [1] | ROD END | |
| 26. | 1A-2457 | [1] | PIN-CLEVIS | |
| 3B-4610 | [1] | PIN-COTTER | ||
| 27. | 031-4155 | [2] | LOCKNUT (5/16-18-THD) | |
| 28. | 8Y-5464 | [1] | BRACKET AS | |
| 29. | 105-0933 C | [1] | COVER AS | |
| 9F-2978 C | [4] | NUT-WELD (3/8-16-THD) | ||
| 30. | 5G-1674 | [1] | COVER AS | |
| 8Y-3393 | [1] | SPRING | ||
| 4B-4319 | [2] | RIVET | ||
| 31. | 5G-0477 | [1] | PLUG | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP22410384
8Y-4984: CONTROL GP-HYDRAULIC HAND
8Y-4984 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-0274 | [1] | ROD-ADJUSTMENT | |
| 2. | 7X-3376 | [4] | NUT-FULL (5/16-24-THD) | |
| 3. | 7X-3374 | [1] | NUT-FULL (1/2-20-THD) | |
| 4. | 5G-0423 | [1] | LEVER AS | |
| 5G-0400 | [2] | BEARING | ||
| 5. | 4J-2701 | [1] | ROD END | |
| 1J-4384 | [1] | PIN-CLEVIS | ||
| 3B-4615 | [1] | PIN-COTTER | ||
| 6. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 7. | 5G-0399 | [2] | SHAFT | |
| 8. | 5G-0325 | [1] | BRACKET AS | |
| 9. | 8T-9371 | [4] | BOLT (3/8-16X0.5-IN) | |
| 10. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 3D-8752 | [2] | LOCKNUT (5/16-24-THD) | |
| 12. | 9K-8757 | [2] | ROD END | |
| 13. | 5G-0420 | [1] | LEVER AS | |
| 5G-0400 | [2] | BEARING | ||
| 14. | 1W-1180 | [1] | ROD | |
| 15. | 7H-3641 | [1] | END-ROD (5/16-24-THD) | |
| 16. | 6V-5782 | [1] | BOLT (5/16-18X1.125-IN) | |
| 17. | 0L-1170 | [1] | HANDLE-LEVER (BLADE TILT) | |
| 18. | 8Y-0483 | [1] | LEVER | |
| 19. | 031-4155 | [1] | LOCKNUT (5/16-18-THD) | |
| 20. | 6S-3991 | [1] | FILM-INSTRUCTION |
#SEBP22410385
8Y-5053: CONTROL GP-HYDRAULIC HAND
8Y-5053 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-8248 HYDRAULIC AR
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 8Y-8248 HYDRAULIC AR
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1473 | [1] | HANDLE | |
| 2. | 7X-3374 | [1] | NUT-FULL (1/2-20-THD) | |
| 3. | 7S-5757 | [1] | RING-RETAINING | |
| 4. | 8Y-5155 | [1] | BOOT AS | |
| 5. | 4M-6425 | [8] | BOLT (5/16-18X1-IN) | |
| 6. | 9B-7237 | [8] | BOLT (3/8-16X1.25-IN) | |
| 7. | 8T-4896 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 9. | 3W-1491 | [1] | SUPPORT | |
| 10. | 8G-1825 | [2] | ROD | |
| 11. | 3D-8752 | [2] | LOCKNUT (5/16-24-THD) | |
| 12. | 6V-1033 | [2] | END-BEARING ROD | |
| 13. | 8Y-6143 | [1] | ROD | |
| 14. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 15. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 16. | 8Y-5384 | [1] | BRACKET AS | |
| 17. | 031-4155 | [8] | LOCKNUT (5/16-18-THD) | |
| 18. | 7X-3376 | [10] | NUT-FULL (5/16-24-THD) | |
| 19. | 7H-3641 | [8] | END-ROD (5/16-24-THD) | |
| 20. | 8Y-2986 | [1] | LEVER AS | |
| 21. | 6V-9528 | [1] | FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE) | |
| 22. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 23. | 8Y-5156 | [1] | LEVER | |
| 24. | 8Y-5150 | [1] | LEVER | |
| 25. | 3W-1492 | [1] | LEVER | |
| 26. | 8Y-5151 | [1] | YOKE | |
| 27. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-0798 | [10] | BEARING-ROLLER | |
| 30. | 8T-0741 | [10] | SEAL-LIP TYPE | |
| 31. | 8Y-5158 | [1] | SHAFT | |
| 32. | 8Y-5157 | [1] | SHAFT | |
| 33. | 8Y-5153 | [1] | SHAFT AS | |
| 34. | 3W-1482 | [1] | SHAFT AS | |
| 35. | 1B-8704 | [1] | KEY-WOODRUFF | |
| 36. | 8G-4658 | [1] | ROD | |
| 37. | 6S-7982 | [1] | SPACER (50MM THK) | |
| 38. | 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | |
| 39. | 2M-2292 | [1] | ROD | |
| 40. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP22410386
8Y-7111: CONTROL GP-HYDRAULIC HAND
8Y-7111 CONTROL GP-HYDRAULIC HAND
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6S-4084 | [1] | FILM-INSTRUCTION (RIPPER LIFT, LOWER) | |
| 2. | 8Y-7112 | [1] | LEVER AS | |
| 1B-6182 | [1] | SPACER (13.11X19.05X1.18-MM THK) | ||
| 3. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 4. | 3B-4610 | [1] | PIN-COTTER | |
| 5. | 3D-9609 | [1] | ROD END | |
| 6. | 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | |
| 7. | 3D-8752 | [2] | LOCKNUT (5/16-24-THD) | |
| 8. | 9K-8757 | [1] | ROD END | |
| 9. | 8Y-0559 | [1] | ROD | |
| 10. | 8Y-7113 | [1] | LEVER AS | |
| 11. | 4H-1641 | [1] | PIN-SPRING | |
| 12. | 8K-1255 | [1] | PIN | |
| 13. | 0L-1170 | [1] | HANDLE-LEVER |
#SEBP22410387
8Y-5052: CONTROL GP-TRANSMISSION
8Y-5052 CONTROL GP-TRANSMISSION
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 138-7074, 8Y-8190, 8Y-8191 POWER TRAIN AR
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 138-7074, 8Y-8190, 8Y-8191 POWER TRAIN AR
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-5794 C | [1] | PLATE | |
| 2. | 4B-1281 | [4] | SCREW-MACHINE (1/4-20X0.625-IN) | |
| 3. | 1K-9060 C | [2] | SEAL-LIP TYPE | |
| 4. | 5G-5726 | [1] | KNOB | |
| 5. | 8Y-1340 | [1] | LEVER | |
| 6. | 5P-1075 C | [7] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 9K-8757 | [4] | ROD END | |
| 4F-2294 | [8] | NUT-JAM (5/16-24-THD) | ||
| 8. | 5G-1671 | [1] | BRACKET | |
| 9. | 3N-7824 | [1] | ROD | |
| 10. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 5G-1092 | [2] | LEVER AS | |
| 12. | 2Y-1834 | [1] | CLIP | |
| 13. | 3N-2843 | [1] | ROD | |
| 14. | 4L-6454 C | [16] | BOLT (3/8-16X1-IN) | |
| 15. | 8T-4896 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 8Y-4955 | [1] | BRACKET AS | |
| 17. | 5S-7379 | [11] | BOLT (3/8-16X0.875-IN) | |
| 18. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 19. | 5G-1034 | [1] | COVER | |
| 20. | 8Y-5195 | [1] | BRACKET | |
| 21. | 5G-1086 | [1] | BRACKET | |
| 22. | 5G-1181 | [1] | LEVER | |
| 23. | 5G-0400 | [2] | BEARING | |
| 24. | 1D-5117 | [1] | NUT-JAM (1/2-13-THD) | |
| 25. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 8S-7271 | [1] | SETSCREW | ||
| 26. | 2M-8908 | [1] | KNOB | |
| 27. | 137-5945 | [1] | SPRING | |
| 28. | 8Y-5194 | [1] | LEVER AS | |
| 29. | 9L-8660 | [2] | SEAL-LIP TYPE | |
| 30. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 5B-5821 | [1] | DOWEL | |
| 32. | 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | |
| 33. | 6D-6187 B | [1] | SHIM (0.127-MM THK) | |
| 6D-6189 B | [3] | SHIM (0.254-MM THK) | ||
| 34. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 35. | 2K-8467 | [1] | PIN-SPRING | |
| 36. | 5G-1158 | [1] | SHAFT | |
| 37. | 5G-1157 | [1] | YOKE | |
| 38. | 8T-5361 | [2] | WASHER-HARD (28X49X5-MM THK) | |
| 39. | 9X-2306 | [1] | WASHER (11X50X5-MM THK) | |
| 40. | 9S-1354 | [6] | NUT (5/8-18-THD) | |
| 8T-4122 | [6] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 1V-6341 | [2] | SEAL | ||
| 41. | 8D-5295 | [2] | PIN | |
| 8D-5294 | [2] | RING | ||
| 42. | 4K-8603 | [1] | PLUG-CUP | |
| 43. | 4F-7952 | [2] | SEAL-O-RING | |
| 44. | 5G-5741 | [2] | HOUSING | |
| 45. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 46. | 5G-1253 | [2] | LEVER | |
| 47. | 9D-5506 | [2] | ROD END | |
| 48. | 9M-1311 | [4] | NUT-JAM (1/4-28-THD) | |
| 49. | 5G-1031 | [1] | HOUSING | |
| 9S-4684 | [1] | PLUG | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 50. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 51. | 6J-2256 | [2] | PIN | |
| 3B-4610 | [2] | PIN-COTTER | ||
| 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 52. | 9H-2400 | [2] | BEARING | |
| 53. | 5G-1061 | [2] | BEARING | |
| 54. | 8C-5604 | [2] | CABLE AS | |
| 55. | 5G-5743 | [2] | ROD END | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP22410388
104-3054: DASH GP
104-3054 DASH GP
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 108-2182, 108-2304 STEERING AR, 107-2331, 107-2337 STEERING AR-CLUTCH & BRAKE
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 108-2182, 108-2304 STEERING AR, 107-2331, 107-2337 STEERING AR-CLUTCH & BRAKE
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-6981 | [9] | SCREW-BUTTON HEAD (1/4-20X0.75-IN) | |
| 2. | 8T-9371 | [4] | BOLT (3/8-16X0.5-IN) | |
| 3. | 8K-4112 | [1] | NUT-RETAINER | |
| 4. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 109-1314 | [1] | COVER | |
| 6. | 8Y-2331 | [1] | COVER | |
| 7. | 104-3052 | [1] | PANEL AS | |
| 8F-9836 | [1] | BOSS (3/8-16-THD) | ||
| 8. | 5D-9629 | [1] | ROD | |
| 9. | 9F-6445 | [4] | NUT-WELD (1/4-20-THD) | |
| 10. | 8Y-5463 | [2] | BRACKET AS | |
| 11. | 4B-4276 | [4] | WASHER (7X16X1.6-MM THK) | |
| 12. | 104-3053 | [1] | FILM | |
| 13. | 104-3548 | [1] | BRACKET AS | |
| 14. | 6V-1359 BD | SEAL | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP22410389
105-4524: DASH GP
105-4524 DASH GP
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 102-5820, 140-2972 CAB GP
AN ATTACHMENT
S/N 6SL1-UP; 7XL1-UP; 9TS1-UP
PART OF 102-5820, 140-2972 CAB GP
AN ATTACHMENT
For full view, you need register
Parts for your D3C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 101-4971 | [1] | DASH AS | |
| 8T-3490 M | [21] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2821 M | [5] | BOSS (M10X1.5X15-MM) | ||
| 2. | 108-4399 | [1] | LINER | |
| 3. | 108-4400 | [1] | LINER | |
| 4. | 8T-4191 M | [5] | BOLT (M10X1.5X16-MM) | |
| 5. | 031-4433 | [5] | WASHER (10.2X50.8X2.5-MM THK) | |
| 6. | 5G-0867 | [2] | BOOT | |
| 7. | 9D-3768 | [1] | GROMMET | |
| 8. | 3H-2900 | [1] | GROMMET | |
| M | METRIC PART | |||
