HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
LINES GP-CYLINDER
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP22420240
143-7219: CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
S/N 8LP1-UP; 8MP1-UP; 8YP1-UP
88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE
PART OF 139-7680, 139-8486, 142-5879 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 8LP1-UP; 8MP1-UP; 8YP1-UP
88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE
PART OF 139-7680, 139-8486, 142-5879 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-7220 | [1] | CYLINDER AS | |
| 3Y-2768 | [2] | RING | ||
| 4D-0298 | [1] | BEARING | ||
| 2. | 5J-7013 | [1] | SEAL AS | |
| 3. | 7J-9886 | [1] | PISTON | |
| 4. | 167-2186 | [1] | SEAL AS-BUFFER | |
| 5. | 5J-8150 | [1] | SEAL-U-CUP | |
| 6. | 8C-9131 | [1] | SEAL-LIP TYPE | |
| 7. | 8J-0090 | [1] | ROD AS-PISTON | |
| 3Y-2768 | [2] | RING | ||
| 4D-0298 | [1] | BEARING | ||
| 8. | 7J-9887 | [1] | CROWN | |
| 9. | 4T-6780 | [1] | RING-WEAR | |
| 10. | 2H-3931 | [1] | SEAL-O-RING | |
| 11. | 4J-9224 | [1] | RING-BACKUP | |
| 12. | 9T-7346 | [1] | HEAD | |
| 13. | 7J-9885 | [1] | RING-WEAR | |
| 14. | 8J-7415 | [1] | WASHER-HARD (28X51X4.5-MM THK) | |
| 15. | 7J-5639 | [1] | BOLT-LOCKING (1-14X2.5-IN) | |
| 16. | 3B-8486 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 17. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 18. | 006-8663 | [1] | RING | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22420241
143-7219: CYLINDER GP-TILT
143-7219 CYLINDER GP-TILT
S/N 8LP1-UP; 8YP1-UP
88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE
PART OF 139-7680, 142-5879 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 8LP1-UP; 8YP1-UP
88.9-MM(3.5-IN)BORE X 152.4-MM(6-IN)STROKE
PART OF 139-7680, 142-5879 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-7220 | [1] | CYLINDER AS | |
| 1A. | 4D-0298 | [1] | BEARING | |
| 2. | 4T-8054 | [1] | SEAL AS | |
| 3. | 7J-9886 | [1] | PISTON | |
| 4. | 167-2186 | [1] | SEAL AS-BUFFER | |
| 5. | 167-2294 | [1] | SEAL-U-CUP | |
| 6. | 167-2450 | [1] | SEAL-WIPER | |
| 7. | 8J-0090 | [1] | ROD AS-PISTON | |
| 7A. | 4D-0298 | [1] | BEARING | |
| 8. | 7J-9887 | [1] | CROWN | |
| 9. | 4T-6780 | [1] | RING-WEAR | |
| 10. | 2H-3931 | [1] | SEAL-O-RING | |
| 11. | 4J-9224 | [1] | RING-BACKUP | |
| 12. | 9T-7346 | [1] | HEAD | |
| 13. | 7J-9885 | [1] | RING-WEAR | |
| 14. | 8J-7415 | [1] | WASHER-HARD (28X51X4.5-MM THK) | |
| 15. | 7J-5639 | [1] | BOLT-LOCKING (1-14X2.5-IN) | |
| 16. | 3B-8486 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 17. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22420242
9J-8674: CYLINDER GP-TILT
9J-8674 CYLINDER GP-TILT
S/N 9SH1-UP; 9TH1-UP; 8LP1-UP; 8MP1-UP
88.9-MM (3.5-IN) BORE X 152.4-MM (6-IN) STROKE
PART OF 104-1828, 104-9632, 105-3109, 139-7680, 139-8486 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 9SH1-UP; 9TH1-UP; 8LP1-UP; 8MP1-UP
88.9-MM (3.5-IN) BORE X 152.4-MM (6-IN) STROKE
PART OF 104-1828, 104-9632, 105-3109, 139-7680, 139-8486 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7J-5639 | [1] | BOLT-LOCKING (1-14X2.5-IN) | |
| 2. | 7J-9885 | [1] | RING-WEAR | |
| 3. | 7J-9886 | [1] | PISTON | |
| 4. | 4T-8054 | [1] | SEAL AS | |
| 5. | 9J-9294 | [1] | CYLINDER AS | |
| 6. | 3Y-2768 | [2] | RING | |
| 7. | 4D-0298 | [1] | BEARING | |
| 8. | 5B-8855 | [1] | PLATE-SCREW | |
| 9. | 9J-0398 | [2] | BOSS | |
| 10. | 5J-8150 | [1] | SEAL-U-CUP | |
| 11. | 8C-9131 | [1] | SEAL-LIP TYPE | |
| 12. | 8J-0090 | [1] | ROD AS-PISTON | |
| 13. | 3Y-2768 | [2] | RING | |
| 14. | 4D-0298 | [1] | BEARING | |
| 15. | 7J-9887 | [1] | CROWN | |
| 16. | 9T-7346 | [1] | HEAD | |
| 17. | 4J-9224 | [1] | RING-BACKUP | |
| 18. | 2H-3931 | [1] | SEAL-O-RING | |
| 19. | 8J-7415 | [1] | WASHER-HARD (28X51X4.5-MM THK) | |
| 20. | 4T-6780 | [1] | RING-WEAR | |
| 21. | 3B-8486 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 22. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 23. | 006-8663 | [1] | RING | |
| 24. | 8C-9122 | [1] | SEAL AS | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22420243
116-6382: HYDRAULIC AR
116-6382 HYDRAULIC AR
S/N 6YL1-UP; 7SL1-UP
FOR USE WITH ENCLOSED ROPS, POWER ANGLE & TILT BLADE AND RIPPER
AN ATTACHMENT
S/N 6YL1-UP; 7SL1-UP
FOR USE WITH ENCLOSED ROPS, POWER ANGLE & TILT BLADE AND RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP22420244
8Y-5065: HYDRAULIC AR
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP22420245
8Y-5068: HYDRAULIC AR
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP22420246
8Y-7126: HYDRAULIC AR
8Y-7126 HYDRAULIC AR
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
FOR USE WITH OPEN ROPS, PAT BLADE AND RIPPER
CANNOT BE USED WITH T667,T668,T670,T671,T672,T673: CANNOT BE USED WITH 2 LEVER BULLDOZER CONTROL
AN ATTACHMENT
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
FOR USE WITH OPEN ROPS, PAT BLADE AND RIPPER
CANNOT BE USED WITH T667,T668,T670,T671,T672,T673: CANNOT BE USED WITH 2 LEVER BULLDOZER CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP22420247
8Y-8248: HYDRAULIC AR
8Y-8248 HYDRAULIC AR
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 140-0055, 8Y-8153, 8Y-8154 GENERAL AR
S/N 6YL1-UP; 7SL1-UP; 1FW1-UP
PART OF 140-0055, 8Y-8153, 8Y-8154 GENERAL AR
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8Y-5053 Y | [1] | CONTROL GP-HYDRAULIC HAND | ||
| 8Y-5054 Y | [1] | LINES GP-HYDRAULIC | ||
| 111-3811 Y | [1] | LINES GP-PUMP | ||
| 112-1173 Y | [1] | PUMP GP-GEAR (IMPLEMENT) | ||
| -OR- | ||||
| 137-0300 Y | [1] | PUMP GP-GEAR (IMPLEMENT) | ||
| 8Y-8205 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| 8Y-5055 Y | [1] | VALVE & MTG GP-CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22420248
117-3532: HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP22420249
110-2236: LINES GP-ANGLE & TILT
110-2236 LINES GP-ANGLE & TILT
S/N 9SH1-UP; 9TH1-UP
PART OF 104-1828, 104-5683 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N 9SH1-UP; 9TH1-UP
PART OF 104-1828, 104-5683 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D4C III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 7X-0326 | [4] | BOLT (1/2-13X3-IN) | ||
| 2. | 2V-3219 I | [2] | HOSE AS | |
| 3. | 030-8144 | [6] | REDUCER-FLARED | |
| 1P-1441 | [6] | NUT-FLARED (3/4-16-THD) | ||
| 4. | 005-4362 | [4] | ELBOW | |
| 5. | 3K-0360 | [6] | SEAL-O-RING | |
| 6. | 110-2233 | [2] | PLATE | |
| 7. | 6S-8021 | [2] | GUARD AS | |
| 3S-3158 | [2] | PIPE | ||
| 8. | 7B-1598 | [2] | CLIP | |
| 9. | 8E-7337 | [1] | TUBE AS | |
| 10. | 6S-8040 I | [2] | HOSE AS | |
| 11. | 110-2235 I | [2] | HOSE AS | |
| 12. | 2V-0156 I | [2] | HOSE AS | |
| 13. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 14. | 6S-9052 | [1] | GUARD | |
| 15. | 030-8188 | [2] | CONNECTOR | |
| 16. | 4L-9337 | [4] | BOLT (3/8-16X1.5-IN) | |
| 17. | 6S-9054 | [1] | TUBE AS | |
| 18. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 19. | 5P-1075 | [17] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 20. | 108-1223 | [1] | TUBE AS | |
| 21. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 22. | 8E-9992 | [1] | GUARD AS | |
| 23. | 110-2234 | [1] | TUBE AS | |
| 24. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 25. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 26. | 6S-6477 | [1] | GUARD | |
| 27. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) | |
| 28. | 8E-9998 | [1] | GUARD AS | |
| 29. | 8E-7559 | [1] | GUARD AS | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 30. | 8E-5550 | [2] | CLIP | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Product Support Program For Installing A New Angling Cylinder Piston Seal That Has Longer Life On Certain D3C III, D3C III XL, D3C III LGP, D4C III, D4C III XL, D4C III LGP, D5C III, D5C III XL, And D5C III LGP Tractors
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog D4C III :
Truck sale:
CATERPILLAR D4CIII 1997
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4CIII 2000
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;