AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-9707 WIPER GP-WINDOW S/N 6ZL1-UP; 9DL1-UP; 8ZS1-UP 12 VOLT-100 DEGREE WIPE ANGLE PART OF 102-9157 WIPER GP-WINDOW AN ATTACHMENT D5C III


OPERATOR STATION
WIPER GP-WINDOW
WORK TOOLS
BLADE GP
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D5C III TRACK-TYPE TRACTOR 6ZL
 D5C D5C LGP XL Series III Tractors Power Shift 6ZL00001-UP (MACHINE) POWERED BY 3046 Engine SEBP2243 D5C III 6ZL   (1993)

OPERATOR STATION

WIPER GP-WINDOW
WIPER GP-WINDOW
102-9157 WIPER GP-WINDOW
WIPER GP-WINDOW
106-9707 WIPER GP-WINDOW
WIPER GP-WINDOW
106-9708 WIPER GP-WINDOW
 

#SEBP22430450
 

106-9707: WIPER GP-WINDOW

106-9707 WIPER GP-WINDOW
S/N 6ZL1-UP; 9DL1-UP; 8ZS1-UP
12 VOLT-100 DEGREE WIPE ANGLE
PART OF 102-9157 WIPER GP-WINDOW
AN ATTACHMENT
i00198008 SEBP2243
1069707 WIPER GP-WINDOW Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-1888 [1] RECEPTACLE  
  3Y-1892 [4] TERMINAL  
2. 6V-6889 M [1] NUT (M8X1.25-THD)  
3. 109-4526 [1] MOTOR AS-WINDOW WIPER  
4. 6V-4298 M [3] BOLT (M5X0.8X16-MM)  
  M   METRIC PART
 

#SEBP22430451
 

106-9708: WIPER GP-WINDOW

106-9708 WIPER GP-WINDOW
S/N 6ZL1-UP; 9DL1-UP; 8ZS1-UP
12 VOLT-70 DEGREE WIPE ANGLE
PART OF 102-9157 WIPER GP-WINDOW
AN ATTACHMENT
i00198009 SEBP2243
1069708 WIPER GP-WINDOW Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-1888 [1] RECEPTACLE  
  3Y-1892 [4] TERMINAL  
2. 6V-6889 M [1] NUT (M8X1.25-THD)  
3. 109-4526 [1] MOTOR AS-WINDOW WIPER  
4. 6V-4298 M [3] BOLT (M5X0.8X16-MM)  
  M   METRIC PART
 

#SEBP22430452
 

106-8465: BLADE GP-ANGLING

106-8465 BLADE GP-ANGLING
S/N 9XH1-UP
PART OF 106-8462, 106-8463 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00491908 SEBP2243
1068465 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1265 [1] BLADE AS-ANGLING  
2. 8J-3989 [1] BRACKET AS  
  7J-5131 [1] TRUNNION  
3. 105-8090 [1] PLATE AS  
4. 8P-9770 [1] PLATE  
5. 104-1847 [1] PLATE AS  
6. 104-1843 [1] BRACKET AS  
7. 7X-0346 [2] BOLT (5/8-11X2-IN)  
8. 8E-4711 [1] PLATE  
9. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
  8J-0729 [3] RETAINER  
10. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
11. 6Y-5836 Y [1] EDGE GP-BIT & CUTTING  
12. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
13. 6Y-1421 [3] PIN  
14. 5C-4088 [1] BUSHING  
15. 105-8084 [1] PIN AS  
16. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22430453
 

139-7690: BLADE GP-ANGLING

139-7690 BLADE GP-ANGLING
S/N 8GP1-UP
PART OF 139-7686, 139-9058 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00496634 SEBP2243
1397690 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 139-9410 [1] BLADE AS-ANGLING  
7. 8J-3989 [1] BRACKET AS  
8. 7J-5131 [1] TRUNNION  
9. 139-5215 [1] PIN  
10. 8P-9770 [1] PLATE  
11. 104-1847 [1] PLATE AS  
12. 120-6555 [1] BRACKET AS  
13. 139-5213 [1] PLATE  
14. 140-0934 [1] EDGE GP-BIT & CUTTING  
15. 140-0983 [2] EDGE-CUTTING (914MM)  
16. 2J-3506 [20] NUT-FULL (3/4-10-THD)  
17. 5J-4771 [20] BOLT-PLOW (3/4-10X2.75-IN)  
18. 5P-8248 [20] WASHER-HARD (20X36.5X3.5-MM THK)  
19. 8E-7078 [1] BIT-END (452MM)  
20. 8E-7079 [1] BIT-END (452MM)  
 

#SEBP22430454
 

139-9040: BLADE GP-ANGLING

139-9040 BLADE GP-ANGLING
S/N 8ZP1-UP
LGP
PART OF 142-5880 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00786281 SEBP2243
1399040 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
6. 142-4915 Y [1] EDGE GP-BIT & CUTTING  
7. 142-1260 [1] BLADE AS-ANGLING  
8. 8J-3989 [1] BRACKET AS  
9. 7J-5131 [1] TRUNNION  
10. 8P-9770 [1] PLATE  
11. 104-1843 [1] BRACKET AS  
12. 104-1847 [1] PLATE AS  
13. 139-5213 [1] PLATE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22430455
 

141-8111: BLADE GP-ANGLING

141-8111 BLADE GP-ANGLING
S/N 8NP1-UP
PART OF 139-9050 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00502537 SEBP2243
1418111 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-8112 [1] BLADE AS-ANGLING  
2. 8J-3989 [1] BRACKET AS  
3. 7J-5131 [1] TRUNNION  
4. 8P-9770 [1] PLATE  
5. 104-1843 [1] BRACKET AS  
6. 104-1847 [1] PLATE AS  
7. 139-5215 [1] PIN  
8. 9J-9004 [4] SPACER (38.0MM)  
9. 6Y-1421 [3] PIN  
10. 8J-3344 [2] SPACER (20.8-MM THK)(20.8MM)  
11. 6Y-5836 Y [1] EDGE GP-BIT & CUTTING  
12. 8J-0729 [3] RETAINER  
13. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22430456
 

106-1062: BLADE GP-STRAIGHT

106-1062 BLADE GP-STRAIGHT
S/N 9WH1-UP
PART OF 106-1065, 106-1066, 106-9298 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00197865 SEBP2243
1061062 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-7624 [1] BLADE AS-ANGLING  
2. 104-1847 [1] PLATE AS  
3. 8J-3989 [1] BRACKET AS  
4. 7J-5131 [1] TRUNNION  
5. 105-8090 [1] PLATE AS  
6. 8P-9770 [1] PLATE  
7. 120-6555 [1] BRACKET AS  
8. 8E-4711 [1] PLATE  
9. 7X-0346 [2] BOLT (5/8-11X2-IN)  
10. 8J-3344 [2] SPACER (20.8-MM THK)  
11. 8E-7088 Y [1] EDGE GP-BIT & CUTTING  
12. 9J-9004 [4] SPACER  
13. 6Y-1421 [3] PIN  
14. 8T-2502 [3] BOLT (3/8-16X1.125-IN)  
15. 8J-0729 [3] RETAINER  
16. 105-8084 [1] PIN AS  
  3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
17. 5C-4088 [1] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22430457
 

9P-7244: COVER GP-SHIPPING

9P-7244 COVER GP-SHIPPING
S/N 1DX1300-UP
PART OF 8E-7594 TRANSMISSION AR
i00197268 SEBP2243
9P7244 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-5390 [1] PLUG (3/8-18-THD)  
2. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
  2M-9780 [2] SEAL-O-RING  
3. 3P-5380 [1] COVER  
4. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
  4B-4278 [4] WASHER (10.2X20.5X1.6-MM THK)  
5. 1D-4717 [6] NUT (3/8-16-THD)  
6. 4B-4949 [2] COVER  
  8B-1615 [2] GASKET  
7. 0L-1143 [6] BOLT (3/8-16X2.5-IN)  
8. 0S-0509 [4] BOLT (3/8-16X0.75-IN)  
9. 1S-2176 [1] COVER  
  9M-6974 [1] GASKET  
 

#SEBP22430458
 

142-4915: EDGE GP-BIT & CUTTING

142-4915 EDGE GP-BIT & CUTTING
S/N 8ZP1-UP
PART OF 139-9040 BLADE GP-ANGLING
AN ATTACHMENT
i00664561 SEBP2243
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6Y-5840 [1] BIT-END (LH)  
  6Y-5839 [1] BIT-END (RH)  
  3F-5108 [22] BOLT-PLOW (5/8-11X2.25-IN)  
  142-4914 [2] EDGE-CUTTING  
  4K-0367 [22] NUT-FULL (5/8-11-THD)  
  5P-8247 [22] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP22430459
 

6Y-5836: EDGE GP-BIT & CUTTING

6Y-5836 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N 9XH1-UP; 8NP1-UP
PART OF 106-8465, 141-8111 BLADE GP-ANGLING
AN ATTACHMENT
i00393073 SEBP2243
6Y5836 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5839 [1] BIT-END (RH)  
2. 6Y-5842 [2] EDGE-CUTTING  
3. 3F-5108 [22] BOLT-PLOW (5/8-11X2.25-IN)  
4. 5P-8247 [22] WASHER-HARD (17X32X3.5-MM THK)  
5. 4K-0367 [22] NUT-FULL (5/8-11-THD)  
6. 6Y-5840 [1] BIT-END (LH)  
 

Information:

Caterpillar Parts SIS Catalog D5C III :

WIPER GP-WINDOW
102-9157 WIPER GP-WINDOW
WINDOW GP-SLIDING
164-0804 WINDOW GP-SLIDING
WINDOW GP-SLIDING
164-0803 WINDOW GP-SLIDING
WINDOW AS-SLIDING
101-4966 WINDOW AS-SLIDING
WINDOW AS-SLIDING
101-4954 WINDOW AS-SLIDING
WASHER GP-WINDOW
102-9158 WASHER GP-WINDOW
TANK GP-WINDOW WASHER
106-9706 TANK GP-WINDOW WASHER
TANK GP-WINDOW WASHER
106-9706 TANK GP-WINDOW WASHER
WIPER GP-WINDOW
106-9708 WIPER GP-WINDOW
BLADE GP-ANGLING
106-8465 BLADE GP-ANGLING
BLADE GP-ANGLING
139-7690 BLADE GP-ANGLING
BLADE GP-ANGLING
139-9040 BLADE GP-ANGLING
BLADE GP-ANGLING
141-8111 BLADE GP-ANGLING
BLADE GP-STRAIGHT
106-1062 BLADE GP-STRAIGHT
COVER GP-SHIPPING
9P-7244 COVER GP-SHIPPING
142-4915 EDGE GP-BIT & CUTTING

Truck sale:

Caterpillar D5CIIIXL, Construction
36,500 
Caterpillar D5CIIIXL, Construction
- Dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D5CIIIXL, Construction
28,000 
Caterpillar D5CIIIXL, Construction
- Dozers
FOLEY, INC.
Caterpillar D5CIIIXL, Construction
30,000 
Caterpillar D5CIIIXL, Construction
- Dozers
WHAYNE SUPPLY COMPANY
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.