AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2T-3530 ELEVATOR AR PART OF 2T-3535 SCRAPER AR 633E WHEEL SCRAPER


IMPLEMENTS
ELEVATOR GP
FLOOR GP
ELEVATOR GP
REDUCER GP-SPEED

WHEEL SCRAPER 633E WHEEL SCRAPER 1EB
 633E Series II Elevating Scraper 1EB00001-00309 (MACHINE) SEBP2247 633E 1EB   (1993)

IMPLEMENTS

ELEVATOR GP
DRIVE GP-ELEVATOR
2T-3525 DRIVE GP-ELEVATOR
DRIVE GP-ELEVATOR
2T-3525 DRIVE GP-ELEVATOR
2T-3530 ELEVATOR AR
FRAME GP-ELEVATOR
2T-3527 FRAME GP-ELEVATOR
GUARD GP-ELEVATOR
2T-3528 GUARD GP-ELEVATOR
IDLER GP-ELEVATOR CHAIN
2T-3972 IDLER GP-ELEVATOR CHAIN
 

#SEBP22470050
 

2T-3530: ELEVATOR AR

2T-3530 ELEVATOR AR
PART OF 2T-3535 SCRAPER AR
i00148234 SEBP2247
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2T-3526 Y [1] CHAIN & FLIGHT GP  
  2T-3525 Y [1] DRIVE GP-ELEVATOR  
  2T-3527 Y [1] FRAME GP-ELEVATOR  
  2T-3528 Y [1] GUARD GP-ELEVATOR  
  2T-3529 Y [1] LINKAGE GP-ELEVATOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22470051
 

2T-3521: FLOOR GP

2T-3521 FLOOR GP
PART OF 2T-3535 SCRAPER AR
i00148226 SEBP2247
2T3521 FLOOR GP Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-2340 [8] WASHER-SPECIAL  
2. 1A-3585 [8] NUT (1-1/2-12-THD)  
3. 9X-8887 [12] BOLT (3/4-10X3-IN)  
4. 2T-3519 [1] FLOOR AS  
5. 2T-3520 [1] LINKAGE AS  
6. 2T-3563 [2] PIN AS  
7. 2T-3637 [1] PIN AS  
8. 2T-3651 [2] SPACER (66.68-MM THK)  
9. 2T-3686 [1] PLATE (12.7-MM THK)  
10. 2T-3687 [3] PLATE (3-MM THK)  
11. 2T-3688 [2] PLATE (1.5-MM THK)  
12. 3G-7872 [4] BRACKET  
13. 3J-9133 [4] BUSHING  
14. 4F-3654 [23] BOLT-PLOW (5/8-11X2-IN)  
15. 4K-0367 [23] NUT-FULL (5/8-11-THD)  
16. 4T-2973 [2] EDGE-CUTTING  
17. 4T-8083 [1] EDGE-CUTTING  
18. 5J-3798 B [24] SHIM (.135MM THK)  
19. 5P-8247 [23] WASHER-HARD (17X32X3.5-MM THK)  
20. 5P-8248 [12] WASHER-HARD (20X36.5X3.5-MM THK)  
21. 0S-1756 [2] BOLT (3/4-10X4.25-IN)  
22. 6J-1797 [8] KEY  
23. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
24. 8J-4741 [3] BAR  
25. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
26. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
28. 6J-1702 [8] ROLLER AS-FLOOR  
    (EACH INCLUDES)
  6J-1815 [1] ROLLER  
29. 1D-4327 [1] SEAL-LIP TYPE  
30. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
31. 2T-0327 [1] SHAFT  
32. 7M-2275 [1] RING-RETAINING  
33. 8B-5972 [1] BALL BEARING  
34. 6J-1798 [1] SPACER  
35. 8W-2033 [2] ROLLER AS  
    (EACH INCLUDES)
  8W-2034 [1] ROLLER AS  
36. 1B-3978 [2] CUP-BEARING (TAPERED ROLLER)  
37. 1B-3980 [1] CONE-BEARING (TAPERED ROLLER)  
38. 5P-5588 [1] SEAL-LIP TYPE  
39. 1B-3980 [1] CONE-BEARING (TAPERED ROLLER)  
40. 1U-4242 [1] RETAINER  
41. 031-2523 [3] BOLT-LOCKING (7/16-14X1.25-IN)  
42. 8X-8915 [1] COVER  
43. 8W-2032 [1] SHAFT AS  
  B   USE AS REQUIRED
 

#SEBP22470052
 

2T-3527: FRAME GP-ELEVATOR

2T-3527 FRAME GP-ELEVATOR
PART OF 2T-3530 ELEVATOR AR
i00148230 SEBP2247
2T3527 FRAME GP-ELEVATOR Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3578 [1] FRAME AS  
2. 7X-0443 [8] BOLT (1-8X5.5-IN)  
3. 8T-5361 [20] WASHER-HARD (28X49X5-MM THK)  
4. 9J-1035 Y [2] ROLLER GP-ELEVATOR CHAIN  
5. 8K-4303 [6] WASHER (33.5X88.9X12-MM THK)  
6. 8T-4122 [12] WASHER-HARD (17X32X3.5-MM THK)  
7. 8I-1056 [2] BUSHING  
8. 8I-1361 [2] PLATE  
9. 7X-0344 [12] BOLT (5/8-11X1.375-IN)  
10. 2T-3972 Y [4] IDLER GP-ELEVATOR CHAIN  
11. 7X-0451 [8] NUT-FULL (1-1/4-7-THD)  
12. 7X-0533 [18] WASHER-HARD (34X55X6-MM THK)  
13. 5G-5056 [2] BOSS  
14. 1K-4378 [2] BOLT (1-1/4-7X13-IN)  
15. 2T-3973 Y [2] IDLER GP-ELEVATOR CHAIN  
16. 2T-3959 [2] BRACKET AS  
17. 2T-3961 [2] ARM AS  
18. 2T-3960 [2] ARM AS  
19. 8T-8927 [2] BOLT (1-8X3.75-IN)  
20. 6V-8190 [2] NUT (1-8-THD)  
21. 2T-3950 [2] PLATE  
22. 3G-8870 [6] LUG  
23. 2T-3951 [2] BAR  
24. 8I-1360 [2] LUG AS  
25. 8I-1253 [2] SKID AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22470053
 

2T-3528: GUARD GP-ELEVATOR

2T-3528 GUARD GP-ELEVATOR
PART OF 2T-3530 ELEVATOR AR
i00148231 SEBP2247
2T3528 GUARD GP-ELEVATOR Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3999 [1] GUARD AS  
2. 1A-0458 [4] BOLT (3/4-10X1.75-IN)  
3. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
4. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP22470054
 

2T-3972: IDLER GP-ELEVATOR CHAIN

2T-3972 IDLER GP-ELEVATOR CHAIN
PART OF 2T-3527 FRAME GP-ELEVATOR
i00148254 SEBP2247
2T3972 IDLER GP-ELEVATOR CHAIN Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3966 [1] SHAFT  
2. 1H-7339 [1] SEAL-O-RING  
3. 6M-4928 [1] RETAINER AS  
  2H-1190 [2] DOWEL  
4. 2H-3935 [1] SEAL-O-RING  
5. 7J-1184 [1] ROLLER AS  
  6Y-7652 [2] CUP-BEARING (TAPERED ROLLER)  
6. 4F-8965 [4] BOLT (7/16-14X1.125-IN)  
  5P-8244 [4] WASHER-HARD (12X22.5X2.5-MM THK)  
7. 7F-3587 [1] WASHER-RETAINING  
8. 2P-0347 [1] PLUG  
  1S-8947 [1] SEAL-O-RING  
9. 7J-1178 [1] COVER  
10. 5J-0279 [2] BOLT  
  5P-6628 BD LOCKWIRE  
11. 5F-3999 [1] SEAL-O-RING  
12. 1M-1304 [1] SUPPORT AS  
  2H-1190 [2] DOWEL  
13. 9W-7220 [1] SEAL GP-DUO-CONE  
  8H-2265 [2] RING  
14. 4B-7255 [2] CONE-BEARING  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22470055
 

2T-3973: IDLER GP-ELEVATOR CHAIN

2T-3973 IDLER GP-ELEVATOR CHAIN
PART OF 2T-3527 FRAME GP-ELEVATOR
i00148255 SEBP2247
2T3973 IDLER GP-ELEVATOR CHAIN Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3965 [1] SHAFT  
2. 1H-7339 [1] SEAL-O-RING  
3. 6M-4928 [1] RETAINER AS  
  2H-1190 [2] DOWEL  
4. 2H-3935 [1] SEAL-O-RING  
5. 7J-1184 [1] ROLLER AS  
  6Y-7652 [2] CUP-BEARING (TAPERED ROLLER)  
6. 4F-8965 [4] BOLT (7/16-14X1.125-IN)  
  5P-8244 [4] WASHER-HARD (12X22.5X2.5-MM THK)  
7. 7F-3587 [1] WASHER-RETAINING  
8. 2P-0347 [1] PLUG  
  1S-8947 [1] SEAL-O-RING  
9. 7J-1178 [1] COVER  
10. 5J-0279 [2] BOLT  
  5P-6628 BD LOCKWIRE  
11. 5F-3999 [1] SEAL-O-RING  
12. 1M-1304 [1] SUPPORT AS  
  2H-1190 [2] DOWEL  
13. 9W-7220 [1] SEAL GP-DUO-CONE  
  8H-2265 [2] RING  
14. 4B-7255 [2] CONE-BEARING  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22470056
 

2T-3529: LINKAGE GP-ELEVATOR

2T-3529 LINKAGE GP-ELEVATOR
S/N 1EB1-291
PART OF 2T-3530 ELEVATOR AR
i00148232 SEBP2247
2T3529 LINKAGE GP-ELEVATOR Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-3680 [1] ARM AS  
2. 2T-3681 [1] ARM AS  
3. 1J-0581 [1] CAP-BEARING  
4. 1D-4631 [2] BOLT (7/8-9X4.25-IN)  
5. 7X-0368 [16] BOLT (3/4-10X3-IN)  
  6V-8182 [16] NUT (3/4-10-THD)  
  8T-4994 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 2T-3967 [1] PLATE  
 

#SEBP22470057
 

2T-3529: LINKAGE GP-ELEVATOR

2T-3529 LINKAGE GP-ELEVATOR
S/N 1EB292-309
PART OF 2T-3530 ELEVATOR AR
i00148233 SEBP2247
2T3529 LINKAGE GP-ELEVATOR Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-1470 C [1] ARM AS  
2. 8I-1471 C [1] ARM AS  
3. 1J-0581 C [2] CAP-BEARING  
4. 1D-4631 C [4] BOLT (7/8-9X4.25-IN)  
5. 7X-0368 C [32] BOLT (3/4-10X3-IN)  
  6V-8182 C [32] NUT (3/4-10-THD)  
  8T-4994 C [64] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 2T-3967 C [2] PLATE  
7. 8I-1078 BC [4] SHIM  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22470058
 

2T-3631: REDUCER GP-ELEVATOR SPEED

2T-3631 REDUCER GP-ELEVATOR SPEED -LH
PART OF 2T-3525 DRIVE GP-ELEVATOR
i00148247 SEBP2247
2T3631 REDUCER GP-ELEVATOR SPEED Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-2737 [1] HOUSING  
2. 2T-2740 [1] CONTAINER-BEARING  
3. 2T-3632 [1] COVER  
4. 8I-1862 [1] SHAFT-OUTPUT  
5. 3G-6235 [1] CARRIER-PLANETARY  
6. 8I-1459 [1] CARRIER-OUTPUT  
7. 3G-6241 [1] GEAR-RING (72, 60-TEETH)  
8. 3G-6237 [3] GEAR-INPUT PLANETARY (29-TEETH)  
9. 3G-6238 [3] GEAR-PLANETARY (24-TEETH)  
10. 2T-3935 [1] FLYWHEEL  
11. 2T-3936 [1] GEAR (12-TEETH)  
12. 2T-3251 [1] GEAR-SUN (12-TEETH)  
13. 3G-6244 [3] SHAFT-PLANETARY  
14. 3G-6245 [3] SHAFT-PLANETARY  
15. 2T-3248 [1] PLATE-RETAINER  
16. 9W-6645 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
17. 5B-7017 [2] SEAL-LIP TYPE  
18. 2J-7550 [2] RING-RETAINING  
19. 6Y-0209 [2] CONE-BEARING  
20. 1P-3934 [2] CUP-BEARING  
21. 4B-3665 [2] BALL BEARING  
22. 8J-7651 [6] BEARING-ROLLER  
23. 8J-7650 [6] BEARING-ROLLER  
24. 8J-7634 [2] SLEEVE-WEAR  
25. 5H-3182 [6] PIN-SPRING  
26. 0A-1763 [2] PLUG-PIPE  
27. 9S-4368 [2] RING-RETAINING  
28. 8J-7636 [1] RING-RETAINING  
29. 8F-9960 [1] SEAL-O-RING  
30. 2B-0858 [2] PLUG-PIPE  
31. 6L-8535 [3] BOLT (1/2-13X1.5-IN)  
32. 9S-1366 [11] BOLT (1/2-13X2.5-IN)  
33. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 4B-4550 [1] FITTING-PRESSURE RELIEF (1/8-27 PTF)  
35. 2P-8386 [1] SPACER-BEARING  
36. 8J-7638 [1] SPACER-BEARING  
37. 3G-6246 [6] WASHER-THRUST  
38. 3G-6247 [6] WASHER-THRUST  
39. 5J-3946 [1] PLUG-VENT  
40. 8J-7199 [1] RING-RETAINING  
41. 8J-7641 [3] SPACER-BEARING  
42. 045-5106 [3] PIN-SPRING  
43. 2T-3249 B [1] SHIM PACK (INCLUDES 22-SHIMS)  
44. 1A-5822 [5] BOLT (1/2-13X2.75-IN)  
45. 8I-1717 [1] BRACKET  
  B   USE AS REQUIRED
 

#SEBP22470059
 

2T-3633: REDUCER GP-ELEVATOR SPEED

2T-3633 REDUCER GP-ELEVATOR SPEED -RH
PART OF 2T-3525 DRIVE GP-ELEVATOR
i00148248 SEBP2247
2T3633 REDUCER GP-ELEVATOR SPEED Parts scheme
  For full view, you need register

Parts for your 633E WHEEL SCRAPER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2T-2737 [1] HOUSING  
2. 2T-2740 [1] CONTAINER-BEARING  
3. 2T-3630 [1] COVER  
4. 8I-1862 [1] SHAFT-OUTPUT  
5. 3G-6235 [1] CARRIER-PLANETARY  
6. 8I-1459 [1] CARRIER-OUTPUT  
7. 3G-6241 [1] GEAR-RING (72, 60-TEETH)  
8. 3G-6237 [3] GEAR-INPUT PLANETARY (29-TEETH)  
9. 3G-6238 [3] GEAR-PLANETARY (24-TEETH)  
10. 2T-3935 [1] FLYWHEEL  
11. 2T-3936 [1] GEAR (12-TEETH)  
12. 2T-3251 [1] GEAR-SUN (12-TEETH)  
13. 3G-6244 [3] SHAFT-PLANETARY  
14. 3G-6245 [3] SHAFT-PLANETARY  
15. 2T-3248 [1] PLATE-RETAINER  
16. 9W-6645 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
17. 5B-7017 [2] SEAL-LIP TYPE  
18. 2J-7550 [2] RING-RETAINING  
19. 6Y-0209 [2] CONE-BEARING  
20. 1P-3934 [2] CUP-BEARING  
21. 4B-3665 [2] BALL BEARING  
22. 8J-7651 [6] BEARING-ROLLER  
23. 8J-7650 [6] BEARING-ROLLER  
24. 8J-7634 [2] SLEEVE-WEAR  
25. 5H-3182 [6] PIN-SPRING  
26. 2F-3628 [2] PLUG-PIPE  
27. 9S-4368 [2] RING-RETAINING  
28. 8J-7636 [1] RING-RETAINING  
29. 8F-9960 [1] SEAL-O-RING  
30. 2B-0858 [2] PLUG-PIPE  
31. 6L-8535 [3] BOLT (1/2-13X1.5-IN)  
32. 9S-1366 [11] BOLT (1/2-13X2.5-IN)  
33. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 4B-4550 [1] FITTING-PRESSURE RELIEF (1/8-27 PTF)  
35. 2P-8386 [1] SPACER-BEARING  
36. 8J-7638 [1] SPACER-BEARING  
37. 3G-6246 [6] WASHER-THRUST  
38. 3G-6247 [6] WASHER-THRUST  
39. 5J-3946 [1] PLUG-VENT  
40. 8J-7199 [1] RING-RETAINING  
41. 8J-7641 [3] SPACER-BEARING  
42. 045-5106 [3] PIN-SPRING  
43. 2T-3249 B [1] SHIM PACK (INCLUDES 22-SHIMS)  
44. 1A-5822 [5] BOLT (1/2-13X2.75-IN)  
45. 8I-1717 [1] BRACKET  
  B   USE AS REQUIRED
 

Information:

Special Instruction
Reconditioning Dimensions for Track Links, Idlers, Rollers and Scraper Elevator Rollers{4154, 4159, 4171, 4180, 6248, 6260}
Reconditioning Dimensions for Track Links, Idlers, Rollers and Scraper Elevator Rollers{4154, 4159, 4171, 4180, 6248, 6260}
Specifications
Elevator Pump<BR> 6E-5845
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Charge Pump For The Elevator Circuit<BR> 106-0675
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Elevator Drive Group<BR> 2T-3525
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Elevator Circuit Accumulator Group<BR> 117-9385
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Elevator Linkage Group<BR> 2T-3529
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Elevator Frame Group<BR> 2T-3527
631E SERIES II TRACTOR WITH 633E ELEVATING SCRAPER HYDRAULIC
Elevator Frame
633E Series II Wheel Tractor-Scraper Hydraulic System
Elevator Frame
633E Series II Wheel Tractor-Scraper Hydraulic System
Systems Operation
Elevator Circuit
633E Series II Wheel Tractor-Scraper Hydraulic System
Testing and Adjusting
Elevator Chain - Adjust
633E Series II Wheel Tractor-Scraper Hydraulic System
Elevator Speed - Check
633E Series II Wheel Tractor-Scraper Hydraulic System
Elevator Circuit - Test and Adjust
633E Series II Wheel Tractor-Scraper Hydraulic System
Elevator Circuit - Flush
633E Series II Wheel Tractor-Scraper Hydraulic System
Disassembly and Assembly
Elevator Control Valve
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Chain Idlers (Top)
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Chain Idlers (Center)
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Chain Rollers (Bottom)
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Flight Assemblies &amp; Chain Assemblies
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Drive Sprockets &amp; Speed Reducer
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Speed Reducer - Disassemble
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Speed Reducer - Assemble
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Motor
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Elevator Hydraulic Pump
633E SERIES II WHEEL TRACTOR - SCRAPER MACHINE SYSTEMS
Service Magazine
Bracket Assembly Facilitates Chain Adjustment {6210,5320,6231,6236,6240,6628}
1997/12/15
Supplement For Operations &amp; Maintenance Manual, Adjusting The Elevator Chain{6210,5320,6231,6236,6240,6241}
1998/03/23

Caterpillar Parts SIS Catalog 633E :

EJECTOR GP
2T-3539 EJECTOR GP
DRIVE GP-ELEVATOR
2T-3525 DRIVE GP-ELEVATOR
DRIVE GP-ELEVATOR
2T-3525 DRIVE GP-ELEVATOR
CHAIN & FLIGHT GP
2T-3526 CHAIN & FLIGHT GP
BOWL GP-SCRAPER
2T-3514 BOWL GP-SCRAPER
VALVE GP-RELIEF
115-1677 VALVE GP-RELIEF
VALVE GP-RELIEF
114-9474 VALVE GP-RELIEF
VALVE GP-RELIEF
114-9473 VALVE GP-RELIEF
FLOOR GP
2T-3521 FLOOR GP
FRAME GP-ELEVATOR
2T-3527 FRAME GP-ELEVATOR
GUARD GP-ELEVATOR
2T-3528 GUARD GP-ELEVATOR
IDLER GP-ELEVATOR CHAIN
2T-3972 IDLER GP-ELEVATOR CHAIN
IDLER GP-ELEVATOR CHAIN
2T-3973 IDLER GP-ELEVATOR CHAIN
LINKAGE GP-ELEVATOR
2T-3529 LINKAGE GP-ELEVATOR
LINKAGE GP-ELEVATOR
2T-3529 LINKAGE GP-ELEVATOR
REDUCER GP-ELEVATOR SPEED
2T-3631 REDUCER GP-ELEVATOR SPEED

Truck sale:

CATERPILLAR 633E 1997
$155,000 USD 
CATERPILLAR 633E 1997
- WHEEL TRACTOR SCRAPERS
FOLEY EQUIPMENT CO. (KS/MO)
1550 S. West Street - Wichita - Kansas
1997 CAT 633E
USD $155,000 
1997 CAT 633E

Foley Equipment Company
Topeka Area, Kansas
1990 CAT 633E
USD $55,950 
1990 CAT 633E

Anthony Banks Machinery
Riverton, Utah
1994 CAT 633E
USD $125,000 
1994 CAT 633E

Teichert
Sacramento, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.