AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

269-3676 CYLINDER HEAD GP S/N 7BL2449-UP 3412 MARINE ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-PUMP

MARINE ENGINE 3412 MARINE ENGINE 7BL
 3412 Marine Engine 7BL00001-UP SEBP2248 3412 7BL   (1992)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD GP
269-3676 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
274-7265 PLUG GP-CYLINDER HEAD
 

#SEBP22480050
 

269-3676: CYLINDER HEAD GP

269-3676 CYLINDER HEAD GP
S/N 7BL2449-UP
i02430450 SEBP2248
2693676 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 [1] BRACKET-FUEL PUMP  
2. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 225-3099 [2] GASKET-CYLINDER HEAD  
9. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
10. 141-3228 Y [2] CYLINDER HEAD GP  
11. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
12. 0L-1352 B [5] BOLT (3/8-16X3.25-IN)  
13. 4N-7253 [12] GASKET-CHAMBER  
14. 359-1439 [48] SEAL AS-WATER  
15. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
16. 6N-6734 [1] SUPPORT-HOUSING (RH)  
17. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
18. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
19. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
21. 8S-9191 [2] BOLT (3/8-16X4-IN)  
22. 1W-5207 [1] BRACKET-FUEL PUMP  
23. 7L-4774 [12] SEAL-O-RING  
24. 100-6920 [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480051
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 7BL1-133
i00108703 SEBP2248
4W7007 CYLINDER HEAD GP Parts scheme 4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 7E-7312 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 C [40] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2242 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 CB [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 C [12] GASKET-CHAMBER  
18. 3E-6772 C [48] SEAL (WATER)  
19. 106-1792 C [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 C [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 C [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 CB [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 CB [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 8M-5249 C [12] SEAL-O-RING  
32. 100-6920 C [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480052
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 7BL134-2452
i00566856 SEBP2248
4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 [1] BRACKET-FUEL PUMP  
2. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING (LH)  
8. 225-3099 [2] GASKET-CYLINDER HEAD  
9. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
11. 141-3228 YC [2] CYLINDER HEAD GP  
12. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 B [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 [12] GASKET-CHAMBER  
18. 359-1439 [48] SEAL AS-WATER  
19. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 B [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 7L-4774 [12] SEAL-O-RING  
32. 100-6920 [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480053
 

7W-2242: CYLINDER HEAD GP

7W-2242 CYLINDER HEAD GP
S/N 7BL1-133
PART OF 4W-7007 CYLINDER HEAD GP
i00108866 SEBP2248
7W2242 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2243 YC [1] CYLINDER HEAD AS  
2. 115-2368 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 115-2367 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480054
 

103-8845: DAMPER & PULLEY GP

103-8845 DAMPER & PULLEY GP
FOR USE WITH DITTA ENGINES
AN ATTACHMENT
i00471171 SEBP2248
1038845 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [2] PULLEY (1-GROOVE)(1 GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22480055
 

5N-5322: DAMPER & PULLEY GP

5N-5322 DAMPER & PULLEY GP
S/N 7BL1-25
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
i00385434 SEBP2248
5N5322 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4399 [1] PULLEY (2-GROOVE)  
2. 167-8130 [1] DAMPER AS  
3. 6N-4400 [1] ADAPTER  
4. 0S-1587 [12] BOLT (1/2-13X1.75-IN)  
5. 1B-7538 [9] BOLT (5/8-18X5.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22480056
 

8N-5572: DAMPER & PULLEY GP

8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
AN ATTACHMENT
i00431413 SEBP2248
8N5572 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
7. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22480057
 

9Y-0651: DAMPER & PULLEY GP

9Y-0651 DAMPER & PULLEY GP
S/N 7BL26-UP
FOR USE WITH FIRE PUMP WITH WATER COOLED MANIFOLDS
i00437070 SEBP2248
9Y0651 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)(1 GROOVE)  
4. 3D-0472 [12] STUD-TAPERLOCK (1/2-13X2.80-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22480058
 

136-9498: DRIVE GP-PUMP

136-9498 DRIVE GP-PUMP
FOR USE ON THE LH SIDE OF SAE NO. 1 FLYWHEEL HOUSING, PROVIDES DRIVE FOR SAE NO. B HYDRAULIC PUMP
FOR USE WITH CUSTOMER SUPPLIED A SIZE PUMP WITH SAE NO. 2 BOLT MOUNTING FLANGE
AN ATTACHMENT
i00503857 SEBP2248
1369498 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5101 [1] SEAL-O-RING  
2. 7N-2416 [1] BEARING-PUMP DRIVE  
3. 1Y-7574 [4] BOLT-HEAD (3/8-16X2.5-IN)  
4. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
5. 7N-2550 [1] COUPLING  
6. 9H-8872 [1] GASKET  
7. 8P-1438 [1] COVER  
8. 0S-1591 [6] BOLT (3/8-16X1.5-IN)  
9. 7N-2432 [1] ADAPTER-HYDRAULIC PUMP  
10. 7N-2533 [1] GASKET  
11. 7N-2549 [1] GEAR-AUXILIARY DRIVE (42-TEETH)  
12. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
 

#SEBP22480059
 

6I-1774: DRIVE GP-PUMP

6I-1774 DRIVE GP-PUMP
PROVIDES AN AUXILIARY DRIVE FOR A HYDRAULIC PUMP MOUNTED ON THE RH REAR OF THE SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
i00392775 SEBP2248
6I1774 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1775 [1] BEARING-PUMP DRIVE  
2. 1A-5822 [2] BOLT (1/2-13X2.75-IN)  
3. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
5. 6I-1776 [1] GEAR-PUMP DRIVE (46-TEETH)  
6. 7N-2558 [1] COUPLING  
7. 6I-1778 [1] GASKET  
8. 0S-1591 [6] BOLT (3/8-16X1.5-IN)  
9. 280-4155 [1] SEAL-INTEGRAL  
10. 2P-4358 [1] FLANGE  
11. 0S-1594 [2] BOLT (3/8-16X1-IN)  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 6I-1777 [1] ADAPTER-HYDRAULIC PUMP  
14. 0S-1590 [4] BOLT (3/8-16X2-IN)  
15. 270-1820 [1] SEAL-O-RING  
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
3408C, 3412, 3412C, and 3412D High Performance Marine Engines
Engine Valve Lash - Inspect/Adjust
3408C, 3412, 3412C, and 3412D High Performance Marine Engines
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Cylinder Head Valves
3408C, 3412C and 3412D High Performance Marine Engines
Cylinder Head
3408C, 3412C and 3412D High Performance Marine Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Service Letter-APD
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Cylinder Head - Inspect
3408C, 3412C and 3412D High Performance Marine Engines
Engine Valve Lash - Inspect/Adjust
3408C, 3412C and 3412D High Performance Marine Engines
Fuel Injection Nozzle - Test
3408C, 3412C and 3412D High Performance Marine Engines
Disassembly and Assembly
Cylinder Head
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Valves
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Valve Guides
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Bridge Dowels
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Valve Seat Inserts
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Fuel Injection Nozzles & Adapters
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Caterpillar Parts SIS Catalog 3412 :

CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER BLOCK GP
2W-5208 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-4859 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1377 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
DAMPER & PULLEY GP
103-8845 DAMPER & PULLEY GP
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9Y-0651 DAMPER & PULLEY GP
DRIVE GP-PUMP
136-9498 DRIVE GP-PUMP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.