AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-8576 TURBOCHARGER GP S/N 7BL1-132 PART OF 4P-7473 TURBOCHARGER GP 3412 MARINE ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
GOVERNOR GP
DRAIN GP-FUEL
GOVERNOR GP

MARINE ENGINE 3412 MARINE ENGINE 7BL
 3412 Marine Engine 7BL00001-UP SEBP2248 3412 7BL   (1992)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
119-8201 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
119-8201 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-7476 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
6I-0745 CARTRIDGE GP-TURBOCHARGER
KIT-TURBOCHARGER GASKET
420-4383 KIT-TURBOCHARGER GASKET
TURBOCHARGER GP
4P-7473 TURBOCHARGER GP
TURBOCHARGER GP
4P-8576 TURBOCHARGER GP
TURBOCHARGER GP
4P-8576 TURBOCHARGER GP
 

#SEBP22480180
 

4P-8576: TURBOCHARGER GP

4P-8576 TURBOCHARGER GP
S/N 7BL1-132
PART OF 4P-7473 TURBOCHARGER GP
i00371795 SEBP2248
4P8576 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1192 [1] HOUSING-COMPRESSOR  
2. 2S-1304 [1] CLAMP AS (COMPRESSOR)  
3. 5S-4517 [1] CLAMP AS (TURBINE)  
5. 6I-1234 [1] HOUSING AS (TURBINE)  
  9L-8412 [7] PLUG-PIPE  
  0L-1024 [6] PLUG-CUP  
6. 6I-0745 Y [1] CARTRIDGE GP-TURBOCHARGER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480181
 

4P-8576: TURBOCHARGER GP

4P-8576 TURBOCHARGER GP
S/N 7BL133-UP
PART OF 4P-7473 TURBOCHARGER GP
i00599236 SEBP2248
4P8576 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1192 [1] HOUSING-COMPRESSOR  
2. 2S-1304 [1] CLAMP AS (COMPRESSOR)  
3. 5S-4517 [1] CLAMP AS (TURBINE)  
4. 141-1468 C [1] CARTRIDGE GP-TURBOCHARGER  
5. 6I-1234 [1] HOUSING AS (TURBINE)  
  9L-8412 [7] PLUG-PIPE  
  0L-1024 [6] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22480182
 

295-1571: BRACKET GP-MOUNTING

295-1571 BRACKET GP-MOUNTING
FOR USE WITH @@@@@130-8220@@@@@
AN ATTACHMENT
i02849534 SEBP2248
2951571 BRACKET GP-MOUNTING Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-4967 [2] SPACER (10.5X19X5.512-MM THK)  
2. 8N-3971 [1] BRACKET AS-FUEL FILTER  
3. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
4. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
5. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
 

#SEBP22480183
 

103-0036: CONTROL GP-FUEL RATIO

103-0036 CONTROL GP-FUEL RATIO
PART OF 103-0122 CONTROL GP-FUEL RATIO
i00468076 SEBP2248
1030036 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-2469 [1] EXTENSION  
2. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 3E-6760 [1] SEAL-O-RING  
4. 124-4668 [1] GASKET-FUEL RATIO CONTROL  
5. 2P-8226 [1] COVER-DIAPHRAGM  
6. 1W-4797 [1] DIAPHRAGM  
7. 110-2468 [1] RETAINER  
8. 6N-0515 [1] SPRING (INNER)  
9. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
10. 103-0035 [1] HOUSING-DIAPHRAGM  
11. 2W-3163 [1] VALVE AS-LIMITER  
12. 4P-1639 [1] SEAL-CONTROL  
13. 1W-2567 [1] RETAINER-SPRING  
14. 7N-0209 [1] SPRING (OUTER)  
15. 2P-8803 [1] WASHER (1.094X1.883X0.036-IN THK)  
16. 4B-3388 [2] BOLT (5/16-18X1.125-IN)  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
17. 6N-0513 [1] SPRING  
18. 125-8828 [1] COVER-FUEL RATIO CONTROL  
19. 4P-0246 [1] VALVE  
20. 9N-1754 [1] SPRING  
21. 5B-7040 [3] BOLT (1/4-20X1-IN)  
 

#SEBP22480184
 

103-0122: CONTROL GP-FUEL RATIO

103-0122 CONTROL GP-FUEL RATIO
i00468084 SEBP2248
1030122 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-5008 [1] ELBOW-PIPE  
2. 3N-7268 I [1] HOSE AS  
3. 8M-2773 [2] CLIP (LOOP)  
4. 1B-2790 [2] BOLT (5/16-18X1.375-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 9L-5125 [1] ELBOW  
6. 4N-8111 [2] BOLT  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  3B-4505 [2] LOCKWASHER  
7. 2P-8643 [1] GASKET  
8. 103-0036 Y [1] CONTROL GP-FUEL RATIO  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480185
 

4N-3828: CONTROL GP-GOVERNOR

4N-3828 CONTROL GP-GOVERNOR
REMOTE & POSITIVE LOCKING
PART OF 6N-2846 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00370417 SEBP2248
4N3828 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2541 C [1] SHAFT  
2. 4N-4523 [1] HANDLE AS  
3. 4W-2542 C [1] SPRING  
4. 4N-4520 [1] GUIDE  
5. 8L-4282 [1] HUB  
6. 6N-0775 C [1] RATCHET-GOVERNOR CONTROL  
7. 4N-4519 [1] QUADRANT-CONTROL  
8. 5K-0605 [1] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22480186
 

6N-2846: CONTROL GP-GOVERNOR

6N-2846 CONTROL GP-GOVERNOR
PROVIDES REMOTE & POSITIVE LOCKING GOVERNOR FOR EITHER RH OR LH CONTROL
AN ATTACHMENT
i00407125 SEBP2248
6N2846 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3828 Y [1] CONTROL GP-GOVERNOR  
2. 6N-2812 [1] SPACER (GOVERNOR CONTROL)  
3. 8H-0707 [2] BOLT (1/4-20X1-IN)  
4. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
  8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22480187
 

7N-4686: COVER GP-SERVICE METER

7N-4686 COVER GP-SERVICE METER
PART OF 109-9974, 112-9997 METER GP-SERVICE
FOR USE WITH EMCP II
AN ATTACHMENT
i00156589 SEBP2248
7N4686 COVER GP-SERVICE METER Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-4076 [1] COVER  
2. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 4M-8303 [1] SEAL-O-RING  
4. 9S-3032 [2] CLAMP  
 

#SEBP22480188
 

2W-5100: DRAIN GP-FUEL

2W-5100 DRAIN GP-FUEL -LH LINES AND ALARM SWITCH
CANNOT BE USED WITH LH PREMIUM INST. PANEL AND LH DUPLEX OIL FILTER SYSTEMS TOGETHER
AN ATTACHMENT
i00359440 SEBP2248
2W5100 DRAIN GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2296 C [1] SWITCH AS-LIQUID LEVEL (LIQUID LEVEL)(FUEL ALARM)  
  7W-2295 [1] COVER AS-SWITCH  
2. 7W-1226 C [1] PLATE  
3. 9L-8493 C [1] CAP-FLARED  
4. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4S-5719 CB [2] SPACER (10.31X25X12.7-MM THK)  
6. 8T-8908 [2] BOLT (1/4-20X1-IN)  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 6V-8185 [2] NUT (1/4-20-THD)  
9. 5N-5940 [10] TUBE AS  
10. 9L-8496 [13] TEE-INVERTED FLARED  
11. 9L-8492 C [2] PLUG (FUEL DRAIN)  
12. 9S-7695 C [1] TEE  
13. 2W-3091 [1] TUBE AS  
14. 2W-3092 [1] TUBE AS  
15. 4W-4901 CI [1] HOSE AS  
16. 8B-1931 [1] BUSHING-REDUCER  
17. 4M-5317 [1] BUSHING-REDUCER  
18. 5N-7739 [1] TUBE AS  
19. 5K-9243 [1] ELBOW-FLARED  
20. 2B-2404 C [2] CLIP  
21. 5D-9231 C [1] CONNECTOR  
22. 0S-1594 CB [2] BOLT (3/8-16X1-IN)  
  0S-1588 CB [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22480189
 

9Y-5457: DRIVE GP-GOVERNOR & FUEL PUMP

9Y-5457 DRIVE GP-GOVERNOR & FUEL PUMP
ALSO AN ATTACHMENT
i00443847 SEBP2248
9Y5457 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3412 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2533 [1] GEAR AS-ADVANCE (86-TEETH)  
  8H-0333 [2] PISTON  
2. 6N-2523 [2] SLIDE  
3. 6N-5156 [2] WEIGHT-ADVANCE  
4. 6N-5653 [1] FLANGE AS  
5. 6N-3927 [1] RETAINER  
6. 5J-5793 [4] BOLT-12 POINT HEAD (1/2-13X2-IN)  
7. 8N-9000 [2] SPRING  
8. 6N-3189 [2] SPRING  
9. 6N-0493 [1] RING  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/07/04
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3408C, 3412, 3412C, and 3412D High Performance Marine Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Turbocharger
3408C, 3412C and 3412D High Performance Marine Engines
Service Letter-China
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Testing and Adjusting
Turbocharger - Inspect
3408C, 3412C and 3412D High Performance Marine Engines
Disassembly and Assembly
Turbocharger
3408 & 3412 HIGH PERFORMANCE MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3412 :

TURBOCHARGER GP
4P-7473 TURBOCHARGER GP
MOUNTING GP-AIR CLEANER
4P-7924 MOUNTING GP-AIR CLEANER
MANIFOLD GP-EXHAUST
4P-7478 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
4P-7478 MANIFOLD GP-EXHAUST
LINES GP-AIR
4P-7477 LINES GP-AIR
KIT-TURBOCHARGER GASKET
420-4383 KIT-TURBOCHARGER GASKET
FITTING GP-EXHAUST
2W-7848 FITTING GP-EXHAUST
ELBOW GP-EXHAUST
3N-7286 ELBOW GP-EXHAUST
TURBOCHARGER GP
4P-8576 TURBOCHARGER GP
BRACKET GP-MOUNTING
295-1571 BRACKET GP-MOUNTING
CONTROL GP-FUEL RATIO
103-0036 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
103-0122 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
6N-2846 CONTROL GP-GOVERNOR
COVER GP-SERVICE METER
7N-4686 COVER GP-SERVICE METER
DRAIN GP-FUEL
2W-5100 DRAIN GP-FUEL

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.