AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

117-1396 WIRING GP-CAB S/N 9ZJ386-UP PART OF 117-1394 CANOPY AR-OPEN ROPS 960F WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 960F WHEEL LOADER 9ZJ
 960F Wheel Loader 9ZJ00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2249 960F 9ZJ   (1993)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
116-6887 WIRING GP-CAB
WIRING GP-CAB
117-1396 WIRING GP-CAB
WIRING GP-CAB
117-1396 WIRING GP-CAB
WIRING GP-ENGINE
9U-2772 WIRING GP-ENGINE
WIRING GP-ENGINE
9U-2772 WIRING GP-ENGINE
WIRING GP-FRONT
9U-2773 WIRING GP-FRONT
 

#SEBP22490270
 

117-1396: WIRING GP-CAB

117-1396 WIRING GP-CAB
S/N 9ZJ386-UP
PART OF 117-1394 CANOPY AR-OPEN ROPS
i00170459 SEBP2249
1171396 WIRING GP-CAB Parts scheme 1171396 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-2811 [1] HARNESS AS-CAB (UPPER)  
2. 8T-4133 M [4] NUT (M10X1.5-THD)  
3. 8M-2770 [6] CLIP (LOOP)  
4. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
6. 117-1387 [1] HARNESS AS-CAB (MAIN-LOWER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 7K-1181 [7] STRAP-CABLE  
9. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
10. 3S-2093 [3] STRAP-CABLE  
11. 4P-7581 [2] CLIP (LADDER)  
12. 114-2876 [1] CONTROL GP-AUTOSHIFT  
  3E-7836 [1] FILM  
13. 110-0553 [1] WIRE AS  
14. 109-6280 [1] PLUG AS  
15. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
16. 8T-8737 [14] PLUG-SEAL  
17. 102-4130 [1] GASKET  
18. 102-4129 [1] PLATE AS  
19. 8T-4138 M [4] BOLT (M6X1X20-MM)  
20. 8T-9405 M [12] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
21. 096-6166 [12] WASHER-HARD (4.5X9X1-MM THK)  
22. 5C-8312 M [12] NUT (M4X0.7-THD)  
23. 5P-7657 D SEAL (.1M)  
24. 8C-5608 [4] SPACER (6.5X9.5X25.4-MM THK)  
25. 8M-2770 [2] CLIP (LOOP)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 4P-8134 [1] CLIP (LADDER)  
29. 7K-1181 [4] STRAP-CABLE  
30. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
31. 3S-2093 [6] STRAP-CABLE  
32. 4P-7581 [2] CLIP (LADDER)  
33. 098-8968 [4] WASHER (5X16X1.2-MM THK)  
34. 6D-9331 [6] WASHER (5X9X74-MM THK)  
35. 9D-7303 [2] GROMMET  
36. 9F-8125 [4] LOCKWASHER  
37. 4B-2048 [4] NUT (10-32-THD)  
38. 6D-6146 [2] SCREW-MACHINE (10-32X1.25-IN)  
39. 4V-4164 [4] BUSHING-TERMINAL  
40. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 105-2799 [1] SHEET AS  
43. 6V-7646 [4] WASHER-HARD (7.2X25X2-MM THK)  
44. 8C-5607 [8] MOUNT-ISOLATION  
45. 9G-3695 [5] PLUG-SEAL  
46. 9G-3672 [1] HOUSING AS-CONNECTOR  
47. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
48. 9X-2043 M [8] SCREW-TRUSS HEAD (M6X1X14-MM)  
49. 4E-4687 [1] PLATE AS  
  3T-0049 [2] CLIP  
50. 4E-4686 [1] PLATE  
51. 7X-2533 M [4] BOLT (M6X1X35-MM)  
52. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP22490271
 

9U-2772: WIRING GP-ENGINE

9U-2772 WIRING GP-ENGINE
S/N 9ZJ1-306
PART OF 106-0427 CHASSIS AR
i00168037 SEBP2249
9U2772 WIRING GP-ENGINE Parts scheme 9U2772 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-7794 [2] CLIP  
2. 9G-9150 [4] CLIP  
3. 3S-2093 [6] STRAP-CABLE  
4. 9X-4276 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
5. 3J-1907 [3] SEAL-O-RING  
6. 9U-2763 [1] HARNESS AS-ENGINE  
7. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
9. 8R-9137 [2] ANGLE  
10. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
11. 8T-4133 M [2] NUT (M10X1.5-THD)  
12. 8M-2770 [7] CLIP (LOOP)  
13. 9G-9154 [1] CLIP  
14. 3E-7886 [1] SENSOR GP-SPEED  
15. 8M-2773 [5] CLIP (LOOP)  
16. 3E-5370 [1] SENSOR GP-TEMPERATURE (TRANSMISSION OIL)  
17. 8T-4224 [14] WASHER-HARD (8.8X16X2-MM THK)  
18. 9M-8406 [7] CLIP (LOOP)  
19. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
20. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
21. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 9G-9152 [1] CLIP  
23. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
24. 5C-7261 M [3] NUT (M8X1.25-THD)  
25. 3V-0778 [1] BRACKET  
26. 9X-3495 [3] CLIP AS  
27. 7K-1181 [1] STRAP-CABLE  
28. 6T-2217 [1] RESISTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
29. 107-3112 [1] HARNESS AS  
30. 4E-2843 [1] PLATE AS  
31. 107-1007 [1] HARNESS AS-TRANSMISSION  
32. 6W-8946 [3] STRIP AS  
33. 8T-4190 M [2] BOLT (M16X2X25-MM)  
34. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
35. 4L-6454 [1] BOLT (3/8-16X1-IN)  
36. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 9M-4594 [1] SPACER (0.406X0.875X0.75-IN THK)  
38. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
39. 3E-5370 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  M   METRIC PART
 

#SEBP22490272
 

9U-2772: WIRING GP-ENGINE

9U-2772 WIRING GP-ENGINE
S/N 9ZJ307-99999
PART OF 106-0427 CHASSIS AR
i00168039 SEBP2249
9U2772 WIRING GP-ENGINE Parts scheme 9U2772 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
2. 4D-7794 [5] CLIP  
3. 9G-9150 [5] CLIP  
4. 8M-2773 [5] CLIP (LOOP)  
5. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
6. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 6T-2217 [1] RESISTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
9. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
10. 9G-9152 [1] CLIP  
11. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
12. 9U-2763 [1] HARNESS AS-ENGINE  
13. 107-3112 [1] HARNESS AS  
14. 3S-2093 [6] STRAP-CABLE  
15. 9X-4276 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
16. 3J-1907 [3] SEAL-O-RING  
17. 9M-8406 [7] CLIP (LOOP)  
18. 116-4491 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
19. 8M-2770 [7] CLIP (LOOP)  
20. 9G-9154 [1] CLIP  
21. 109-0267 [1] SENSOR AS-SPEED (ENGINE)  
  171-5349 [1] STRAP-MARKER  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
22. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)(TRANSMISSION OIL)  
23. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
24. 4E-2244 [1] WIRE AS  
25. 4E-2843 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
26. 4L-6454 [1] BOLT (3/8-16X1-IN)  
27. 6W-8946 [3] STRIP AS  
28. 9X-3495 [2] CLIP AS  
29. 131-0784 Y [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
30. 8T-4190 M [2] BOLT (M16X2X25-MM)  
31. 8T-4133 M [1] NUT (M10X1.5-THD)  
32. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
33. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
34. 5C-7261 M [1] NUT (M8X1.25-THD)  
35. 3V-0778 [1] BRACKET  
36. 9M-4594 [1] SPACER (0.406X0.875X0.75-IN THK)  
37. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
38. 107-1007 [1] HARNESS AS-TRANSMISSION  
39. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22490273
 

9U-2773: WIRING GP-FRONT

9U-2773 WIRING GP-FRONT
S/N 9ZJ1-306
PART OF 106-0427 CHASSIS AR
i00168040 SEBP2249
9U2773 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8801 [13] NUT (3/8-16-THD)  
2. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 6D-4246 [1] CLIP (LOOP)  
4. 8M-2770 [7] CLIP (LOOP)  
5. 9D-3769 [2] GROMMET  
6. 9G-9152 [1] CLIP  
7. 5P-7648 [2] GROMMET  
8. 6T-6962 [2] WIRE AS  
9. 3S-2093 [2] STRAP-CABLE  
10. 3T-3048 [2] CLIP AS  
11. 9X-3495 [1] CLIP AS  
12. 107-0102 [1] HARNESS AS  
13. 9M-8406 [3] CLIP (LOOP)  
14. 4K-8864 [2] CLIP (LOOP)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 5K-0806 [1] CLAMP  
17. 8R-8139 [1] HARNESS AS  
18. 3T-3045 [1] CLIP AS  
19. 3T-0050 [2] CLIP  
20. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
21. 7X-3178 [2] BOLT (1/4-20X1.625-IN)  
22. 7V-5628 [1] PLATE (TOP)  
23. 7V-6089 [2] CLAMP  
24. 4V-1939 [4] CLAMP  
25. 5V-6439 [2] PLATE  
26. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
 

#SEBP22490274
 

9U-2773: WIRING GP-FRONT

9U-2773 WIRING GP-FRONT
S/N 9ZJ307-99999
PART OF 106-0427 CHASSIS AR
i00168041 SEBP2249
9U2773 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8801 [13] NUT (3/8-16-THD)  
2. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 6D-4246 [1] CLIP (LOOP)  
4. 8M-2770 [7] CLIP (LOOP)  
5. 9D-3769 [2] GROMMET  
6. 9G-9152 [1] CLIP  
7. 5P-7648 [2] GROMMET  
8. 4V-1939 [4] CLAMP  
9. 5V-6439 [2] PLATE  
10. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
11. 9X-3495 [1] CLIP AS  
12. 107-0102 [1] HARNESS AS  
13. 9M-8406 [3] CLIP (LOOP)  
14. 4K-8864 [2] CLIP (LOOP)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 5K-0806 [1] CLAMP  
17. 8R-8139 [1] HARNESS AS  
18. 3T-3045 [1] CLIP AS  
19. 3T-0050 [2] CLIP  
20. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
21. 7X-3178 [2] BOLT (1/4-20X1.625-IN)  
22. 7V-5628 [1] PLATE (TOP)  
23. 7V-6089 [2] CLAMP  
 

#SEBP22490275
 

102-8738: WIRING GP-PAYLOAD SENSOR

102-8738 WIRING GP-PAYLOAD SENSOR
S/N 9ZJ1-166
PART OF 102-8737 MONITOR AR-PAYLOAD
i00168117 SEBP2249
1028738 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER HEAD END OIL)  
2. 8X-5562 I [1] HOSE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
3. 6V-8397 [2] SEAL-O-RING  
4. 4E-2448 [1] BRACKET  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 101-3677 [1] ADAPTER  
8. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
9. 6K-0806 [8] STRAP-CABLE  
10. 6V-8801 [5] NUT (3/8-16-THD)  
  5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 7I-3235 [1] GUARD  
12. 4E-2452 [1] ARM-BAIL  
13. 8K-1253 [2] ROD END  
14. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
15. 2M-2292 [1] ROD  
16. 7I-3236 [1] SUPPORT AS  
17. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
  8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
  5C-2890 M [3] NUT (M6X1-THD)  
18. 4E-2250 [1] HOUSING  
19. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
20. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
21. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
22. 6S-4868 [1] LEVER  
23. 4E-2453 [1] SHAFT  
24. 6D-3025 [2] BALL BEARING  
25. 2L-6726 [2] RING-RETAINING  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
28. 3E-5400 Y [1] SENSOR GP-POSITION (LIFT)  
29. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
30. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8T-5005 BM [8] BOLT (M10X1.5X70-MM)  
32. 8T-4121 B [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
34. 4J-0520 [2] SEAL-O-RING  
35. 7T-8593 [1] BLOCK  
36. 103-4772 [1] HARNESS AS  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22490276
 

102-8738: WIRING GP-PAYLOAD SENSOR

102-8738 WIRING GP-PAYLOAD SENSOR
S/N 9ZJ167-342
PART OF 102-8737, 126-3506 MONITOR AR-PAYLOAD
i00168118 SEBP2249
1028738 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (PAYLOAD, LIFT CYL HEAD END OIL)  
2. 8X-5562 I [1] HOSE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
3. 6V-8397 [2] SEAL-O-RING  
4. 4E-2448 [1] BRACKET  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 101-3677 [1] ADAPTER  
8. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
9. 6K-0806 [8] STRAP-CABLE  
10. 6V-8801 [5] NUT (3/8-16-THD)  
11. 7I-3235 [1] GUARD  
12. 4E-2452 [1] ARM-BAIL  
13. 8K-1253 [1] ROD END  
14. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
15. 114-1766 [1] ROD  
16. 7I-3236 [1] SUPPORT AS  
17. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
  5C-2890 M [3] NUT (M6X1-THD)  
18. 4E-2250 [1] HOUSING  
19. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
20. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
21. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
22. 6S-4868 [1] LEVER  
23. 4E-2453 [1] SHAFT  
24. 6D-3025 [2] BALL BEARING  
25. 2L-6726 [2] RING-RETAINING  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
28. 110-8190 CY [1] SENSOR GP-POSITION (LIFT)  
29. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
30. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8T-5005 BM [8] BOLT (M10X1.5X70-MM)  
32. 8T-4121 B [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
34. 4J-0520 [1] SEAL-O-RING  
35. 103-4772 [1] HARNESS AS  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
36. 5P-9683 [1] ROD END  
37. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
38. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22490277
 

102-8738: WIRING GP-PAYLOAD SENSOR

102-8738 WIRING GP-PAYLOAD SENSOR
S/N 9ZJ343-UP
PART OF 126-3506, 130-5197 MONITOR AR-PAYLOAD
i00168119 SEBP2249
1028738 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4672 YC [1] SENSOR GP-PRESSURE (LIFT CYLINDER HEAD END OIL)  
2. 8X-5562 I [1] HOSE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
3. 6V-8397 C [3] SEAL-O-RING  
4. 4E-2448 [1] BRACKET  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 101-3677 [1] ADAPTER  
8. 6V-9200 [1] ELBOW  
  3J-7354 [1] SEAL-O-RING  
9. 6K-0806 [8] STRAP-CABLE  
10. 6V-8801 [5] NUT (3/8-16-THD)  
11. 7I-3235 [1] GUARD  
12. 4E-2452 [1] ARM-BAIL  
13. 8K-1253 [1] ROD END  
14. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
15. 114-1766 [1] ROD  
16. 7I-3236 [1] SUPPORT AS  
17. 9X-2480 M [3] BOLT (M6X1X45-MM)  
  9X-6165 [6] WASHER (6.5X22X2.5-MM THK)  
  8C-5607 [6] MOUNT-ISOLATION  
  8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
  5C-2890 M [3] NUT (M6X1-THD)  
18. 4E-2250 [1] HOUSING  
19. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
20. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
21. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
22. 6S-4868 [1] LEVER  
23. 4E-2453 [1] SHAFT  
24. 6D-3025 [2] BALL BEARING  
25. 2L-6726 [2] RING-RETAINING  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
28. 219-2384 C [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
29. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
30. 8T-4896 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8T-5005 BM [8] BOLT (M10X1.5X70-MM)  
32. 8T-4121 B [8] WASHER-HARD (11X21X2.5-MM THK)  
33. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
34. 4J-0520 [1] SEAL-O-RING  
35. 103-4772 [1] HARNESS AS  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
36. 5P-9683 [1] ROD END  
37. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
38. 122-2222 C [1] ADAPTER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22490278
 

9U-1823: WIRING GP-REAR

9U-1823 WIRING GP-REAR
S/N 9ZJ1-386
PART OF 106-0427 CHASSIS AR
i00168012 SEBP2249
9U1823 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-8406 [8] CLIP (LOOP)  
2. 7M-3361 [2] GROMMET  
3. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [1] NUT (3/8-16-THD)  
5. 9U-4371 [1] HARNESS AS  
6. 5P-7648 [2] GROMMET  
7. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP22490279
 

9U-1823: WIRING GP-REAR

9U-1823 WIRING GP-REAR
S/N 9ZJ387-99999
PART OF 106-0427 CHASSIS AR
i00168013 SEBP2249
9U1823 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2374 [1] HARNESS AS-REAR  
2. 9M-8406 [8] CLIP (LOOP)  
3. 6V-8801 [1] NUT (3/8-16-THD)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
5. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
6. 7M-3361 [2] GROMMET  
7. 5P-7648 [2] GROMMET  
8. 129-2360 [1] COVER  
9. 9U-2277 [1] CLIP AS  
10. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 960F :

WIRING GP-CAB
117-1396 WIRING GP-CAB
WIRING GP-CAB
116-6887 WIRING GP-CAB
WIRING GP-CAB
116-6887 WIRING GP-CAB
WIRING GP-CAB
107-3025 WIRING GP-CAB
WIRING GP-CAB
107-3025 WIRING GP-CAB
WIRING GP-CAB
106-7778 WIRING GP-CAB
WIRING GP-CAB
106-7778 WIRING GP-CAB
WIRING GP-CAB
106-7778 WIRING GP-CAB
WIRING GP-ENGINE
9U-2772 WIRING GP-ENGINE
WIRING GP-ENGINE
9U-2772 WIRING GP-ENGINE
WIRING GP-FRONT
9U-2773 WIRING GP-FRONT
WIRING GP-FRONT
9U-2773 WIRING GP-FRONT
WIRING GP-PAYLOAD SENSOR
102-8738 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
102-8738 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
102-8738 WIRING GP-PAYLOAD SENSOR
WIRING GP-REAR
9U-1823 WIRING GP-REAR

Truck sale:

Caterpillar 960F, Construction
49,000 USD 
Caterpillar 960F, Construction
- Wheel Loaders
MILTON CAT
CATERPILLAR 960F 1994
 
CATERPILLAR 960F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
1997 CAT 960F
USD $38,000 
1997 CAT 960F

JB Earthmoving Equipment LLC
Georgia
1995 CAT 960F
USD $42,403 
1995 CAT 960F

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT 960F
USD $35,315 
1996 CAT 960F

AMMAR GENERAL TRADING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.