AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-0066 FASTENER GP-OIL PAN S/N 6NC11693-UP PART OF 118-9729 ENGINE AR 350-A EXCAVATOR


BASIC ENGINE
PAN GP-OIL
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CRANKSHAFT GP
CYLINDER HEAD GP

EXCAVATOR 350-A EXCAVATOR 2ZL
 350 & 350 L Excavators 2ZL00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2250 350-A 2ZL   (1992)

BASIC ENGINE

PAN GP-OIL
FASTENER GP-OIL PAN
2P-6200 FASTENER GP-OIL PAN
FASTENER GP-OIL PAN
9Y-0066 FASTENER GP-OIL PAN
PAN GP-OIL
7E-4236 PAN GP-OIL
 

#SEBP22500040
 

9Y-0066: FASTENER GP-OIL PAN

9Y-0066 FASTENER GP-OIL PAN
S/N 6NC11693-UP
PART OF 118-9729 ENGINE AR
i00157387 SEBP2250
9Y0066 FASTENER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0573 [5] BOLT (3/8-16X2.75-IN)  
2. 5M-2894 [46] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 0S-1591 [20] BOLT (3/8-16X1.5-IN)  
4. 3B-1915 [18] BOLT (3/8-16X1.375-IN)  
5. 9Y-0630 [2] PLATE  
6. 0L-1352 [3] BOLT (3/8-16X3.25-IN)  
7. 9Y-0629 [1] PLATE  
 

#SEBP22500041
 

4P-2703: FLYWHEEL GP

4P-2703 FLYWHEEL GP
S/N 6NC1-UP; 08Z70000-99999
PART OF 118-9729, 4P-2701 ENGINE AR
i00374865 SEBP2250
4P2703 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5131 [1] FLYWHEEL AS  
2. 7N-9146 [1] GEAR (156-TEETH)  
3. 0S-2318 [9] BOLT (5/8-18X3.25-IN)  
 

#SEBP22500042
 

1W-4563: GEAR GP-FRONT

1W-4563 GEAR GP-FRONT
S/N 08Z70000-89468
TIMING
PART OF 4P-2701 ENGINE AR
i00148457 SEBP2250
1W4563 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2602 [1] BOLT (5/8-11X2-IN)  
  7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
2. 9N-5760 Y [1] DAMPER GP (80 TEETH)  
3. 0S-1594 [2] BOLT (3/8-16X1-IN)  
4. 196-0029 C [1] GEAR AS-IDLER (57-TEETH)  
  195-0302 [1] BUSHING  
5. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
6. 1W-4402 [1] GEAR-CAMSHAFT (80-TEETH)  
7. 170-7502 [1] SHAFT-DRIVE IDLER  
8. 8N-4960 [1] PLATE-THRUST  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 196-0223 C [1] GEAR AS-IDLER (60-TEETH)  
  196-9988 [1] BUSHING  
11. 0S-1748 [4] BOLT (3/8-24X2-IN)  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22500043
 

4P-9858: GEAR GP-FRONT

4P-9858 GEAR GP-FRONT
S/N 6NC1-UP; 08Z89469-99999
TIMING
PART OF 118-9729 ENGINE AR
i00122114 SEBP2250
4P9858 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2602 [1] BOLT (5/8-11X2-IN)  
2. 7N-2994 [1] WASHER (49.3X16.25X12.3-MM THK)  
3. 8N-4960 [1] PLATE-THRUST  
4. 0S-1618 [2] BOLT (5/16-18X1-IN)  
5. 170-7502 C [1] SHAFT-DRIVE IDLER  
6. 0S-1748 [4] BOLT (3/8-24X2-IN)  
7. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 196-0224 [1] GEAR AS-IDLER (50-TEETH)  
  196-9988 [1] BUSHING  
9. 4P-7826 [1] GEAR-CAMSHAFT (66-TEETH)  
10. 4P-7822 [1] WEIGHT AS  
10A. 9N-5766 [2] WEIGHT  
10B. 1W-5879 [2] SPRING (54.6MM LONG)  
10C. 1W-5878 [2] SPRING (35.7MM LONG)  
10D. 9N-5767 [2] SLIDE  
10E. 9N-5765 [1] PLATE-END  
10F. 4B-1273 [2] SCREW-MACHINE (10-24X0.5-IN)  
10G. 8N-0498 [1] SEAL-FACE  
10H. 6F-4718 [1] SEAL-O-RING  
11. 0S-1594 C [2] BOLT (3/8-16X1-IN)  
12. 196-0028 [1] GEAR AS-IDLER (47-TEETH)  
  195-0302 [1] BUSHING  
13. 5B-9079 [1] NUT-JAM (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22500044
 

4P-2704: GEAR GP-REAR

4P-2704 GEAR GP-REAR
S/N 6NC1-31259; 08Z70000-99999
PART OF 118-9729, 4P-2701 ENGINE AR
i00374870 SEBP2250
4P2704 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2472 [1] GEAR-CRANKSHAFT  
    (57 TEETH)
2. 8M-4704 [1] SEAL-O-RING (158.34MM ID)  
3. 160-7573 [2] SHAFT-IDLER GEAR  
4. 5P-4141 [4] BOLT-SELF-LOCKING (1/2-13X1.75-IN)  
5. 4P-8201 [1] GEAR AS-IDLER (73 TEETH)  
  9M-2418 [1] BUSHING  
6. 4P-8202 [1] GEAR AS-IDLER (83 TEETH)  
  9M-2418 [1] BUSHING  
7. 4P-2660 [1] GEAR AS-DRIVE (71 TEETH)  
  4F-6024 [1] PIN  
8. 4P-6729 [1] GEAR AS-DRIVE (71 TEETH)  
  4F-6024 [1] PIN  
9. 4P-6734 [1] ADAPTER AS-PUMP  
  8M-9315 [1] BUSHING  
10. 7N-0388 [7] BOLT-HEAD  
11. 4P-6735 [1] ADAPTER AS-PUMP  
  8M-9315 [1] BUSHING  
12. 0S-1573 [8] BOLT (1/2-13X4-IN)  
13. 4P-6736 [2] ADAPTER AS-PUMP  
  8M-9315 [1] BUSHING  
14. 9S-8752 [12] NUT-FULL (3/8-16-THD)  
15. 5L-5032 [2] SEAL-O-RING (158.115MM ID)  
16. 2M-4453 [1] SEAL-O-RING (12.294MM ID)  
17. 1S-1768 [1] SLEEVE  
18. 2D-9572 [2] SEAL-O-RING  
19. 2M-1538 [12] STUD-TAPERLOCK (3/8-16X1.6-IN)  
20. 7N-8374 [3] COVER-PUMP  
21. 5F-3106 [3] SEAL-O-RING  
22. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
23. 0S-1592 [6] BOLT (5/8-11X1.25-IN)  
24. 5J-9393 [1] BOLT-12 POINT HEAD (1/2-13X3.75-IN)  
  9S-3263 B COMPOUND-THREAD LOCK  
25. 6F-4855 [4] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP22500045
 

4P-2704: GEAR GP-REAR

4P-2704 GEAR GP-REAR
S/N 6NC31260-UP
PART OF 118-9729 ENGINE AR
i01691390 SEBP2250
4P2704 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2472 [1] GEAR-CRANKSHAFT  
    (57 TEETH)
2. 8M-4704 [1] SEAL-O-RING (158.34MM ID)  
3. 160-7573 [2] SHAFT-IDLER GEAR  
4. 5P-4141 [4] BOLT-SELF-LOCKING (1/2-13X1.75-IN)  
5. 4P-8201 [1] GEAR AS-IDLER (73 TEETH)  
  9M-2418 [1] BUSHING  
6. 4P-8202 [1] GEAR AS-IDLER (83 TEETH)  
  9M-2418 [1] BUSHING  
7. 187-8198 C [1] GEAR AS-DRIVE (71 TEETH)  
  4F-6024 [1] PIN  
8. 187-8199 C [1] GEAR AS-DRIVE (71 TEETH)  
  4F-6024 [1] PIN  
9. 187-8226 C [1] ADAPTER AS-PUMP  
  160-8184 [1] BUSHING  
10. 7N-0388 [7] BOLT-HEAD  
11. 187-8227 C [1] ADAPTER AS  
  160-8184 [1] BUSHING  
12. 0S-1573 [8] BOLT (1/2-13X4-IN)  
13. 4P-6736 [2] ADAPTER AS-PUMP  
  8M-9315 [1] BUSHING  
14. 9S-8752 [12] NUT-FULL (3/8-16-THD)  
15. 5L-5032 [2] SEAL-O-RING (158.115MM ID)  
16. 2M-4453 [1] SEAL-O-RING (12.294MM ID)  
17. 1S-1768 [1] SLEEVE  
18. 2D-9572 [2] SEAL-O-RING  
19. 2M-1538 [12] STUD-TAPERLOCK (3/8-16X1.6-IN)  
20. 7N-8374 [3] COVER-PUMP  
21. 5F-3106 [3] SEAL-O-RING  
22. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
23. 0S-1592 [6] BOLT (5/8-11X1.25-IN)  
24. 5J-9393 [1] BOLT-12 POINT HEAD (1/2-13X3.75-IN)  
  9S-3263 B COMPOUND-THREAD LOCK  
25. 6F-4855 [4] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22500046
 

4P-2702: HOUSING GP-FLYWHEEL

4P-2702 HOUSING GP-FLYWHEEL
S/N 6NC1-UP; 08Z70000-99999
PART OF 118-9729, 4P-2701 ENGINE AR
i00374862 SEBP2250
4P2702 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2786 [1] HOUSING-FLYWHEEL  
2. 4P-2476 [1] PLATE AS-GEAR TRAIN  
3. 0L-1143 [5] BOLT (3/8-16X2.5-IN)(MARKED A)  
4. 7B-3235 [6] BOLT (1/2-13X1.375-IN)  
5. 9X-8875 [10] BOLT (1/2-13X3.5-IN)(MARKED B)  
6. 9H-8260 [1] BOLT (1/2-13X6.25-IN)  
7. 1A-5822 [3] BOLT (1/2-13X2.75-IN)(MARKED C)  
8. 1J-9671 [6] SEAL-O-RING  
9. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 9S-9739 [1] BOLT (1/2-13X2.7-IN)  
11. 5J-5794 [5] BOLT (1/2-13X3.5-IN)(MARKED D)  
12. 9S-8003 [6] PLUG (1/2-20-THD)  
13. 5F-0304 [1] PLUG  
14. 2A-1162 [1] GASKET  
98. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
 

#SEBP22500047
 

8N-0303: HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
S/N 6NC1-UP; 08Z70000-99999
PART OF 118-9729, 4P-2701 ENGINE AR
i00122460 SEBP2250
8N0303 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0923 [1] HOUSING AS-FRONT  
2. 9X-2485 [6] STUD  
3. 1W-7816 [1] PLATE AS  
  5M-6214 [1] PLUG (1/8-27 PTF)  
4. 6H-0192 [3] STUD  
5. 8N-0110 [1] GASKET-FRONT PLATE  
6. 1W-3900 [1] GASKET  
 

#SEBP22500048
 

2P-8598: HUB GP-CRANKSHAFT

2P-8598 HUB GP-CRANKSHAFT
S/N 6NC1-UP; 08Z70000-99999
PART OF 118-9729, 4P-2701 ENGINE AR
i00169977 SEBP2250
2P8598 HUB GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-5687 [1] HUB-CRANKSHAFT  
2. 5S-9948 [1] WASHER  
3. 7B-5163 [1] BOLT (3/4-16X4.75-IN)  
 

#SEBP22500049
 

391-8256: KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
S/N 6NC1-UP; 08Z70000-99999
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FIELD REPLACEMENT FOR 142-0228 KIT-GASKET
FIELD INSTALLATION
i05103469 SEBP2250
  For full view, you need register

Parts for your 350-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-2295 [4] BOLT (3/8-16X1.625-IN)  
  1H-7666 [1] GASKET  
  1P-0451 [1] GASKET (TURBOCHARGER)  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  5S-6735 [2] GASKET  
  7N-0200 [1] GASKET  
  7N-0944 [1] GASKET (WATER TEMPERATURE REGULATOR)  
  8H-9788 [1] GASKET  
  188-6126 [1] GASKET  
  111-8015 [1] GASKET AS-CYLINDER HEAD  
  2P-6132 [1] GASKET-ELBOW  
  9S-7083 [1] GASKET-INLET  
  9Y-1979 [3] GASKET-MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  115-7550 [1] GASKET-PLATE  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  7N-8018 [6] SEAL  
  9Y-1798 [18] SEAL  
  2M-9780 [1] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
  3S-5496 [2] SEAL-O-RING  
  4L-8337 [2] SEAL-O-RING  
  5M-5860 [2] SEAL-O-RING  
  5H-7704 [2] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  8M-4448 [1] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  133-1247 [1] SEAL-VALVE COVER  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
 

Information:

Disassembly and Assembly
Engine Oil Pan - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 350-A :

FASTENER GP-OIL PAN
2P-6200 FASTENER GP-OIL PAN
FASTENER GP-FRONT HOUSING
8N-0872 FASTENER GP-FRONT HOUSING
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
DRIVE GP-FAN
100-7622 DRIVE GP-FAN
DRIVE GP-FAN
100-7612 DRIVE GP-FAN
DRIVE GP-AUXILIARY
7C-2162 DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
120-6618 DRIVE GP-AUXILIARY
DAMPER GP
9N-5760 DAMPER GP
FLYWHEEL GP
4P-2703 FLYWHEEL GP
GEAR GP-FRONT
1W-4563 GEAR GP-FRONT
GEAR GP-FRONT
4P-9858 GEAR GP-FRONT
GEAR GP-REAR
4P-2704 GEAR GP-REAR
GEAR GP-REAR
4P-2704 GEAR GP-REAR
HOUSING GP-FLYWHEEL
4P-2702 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
HUB GP-CRANKSHAFT
2P-8598 HUB GP-CRANKSHAFT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.