AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

121-8909 CYLINDER GP-BOOM -FRONT SHOVEL S/N 7LL27-UP 343MM (13.5IN) BORE X 2200MM (86.6IN) STROKE PART OF 108-5783 SHOVEL AR-FRONT Type 2 AN ATTACHMENT 5230


HYDRAULIC SYSTEM
CYLINDER GP

MINING EXCAVATOR 5230 MINING EXCAVATOR 7LL
 5230 Excavator 7LL00001-UP (MACHINE) POWERED BY 3516 Engine SEBP2259 5230 7LL   (1993)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
115-5522 CYLINDER GP-BOOM
CYLINDER GP-BOOM
121-8909 CYLINDER GP-BOOM
CYLINDER GP-BOOM
121-8909 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
108-2136 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
115-5528 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
 

#SEBP22590580
 

121-8909: CYLINDER GP-BOOM

121-8909 CYLINDER GP-BOOM -FRONT SHOVEL
S/N 7LL27-UP
343MM (13.5IN) BORE X 2200MM (86.6IN) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
Type 2
AN ATTACHMENT
i01170404 SEBP2259
1218909 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-8911 [1] CYLINDER AS  
2. 108-3549 [2] BEARING  
3. 5M-6666 [8] WASHER (38.5X55.3X5-MM THK)  
4. 121-4188 [2] RING-WEAR  
5. 192-1445 C [1] SEAL AS  
6. 121-8915 [1] PISTON  
7. 4D-4508 [1] SEAL-O-RING  
8. 157-7246 C [1] RING-BACKUP  
9. 121-8914 [1] HEAD  
10. 7Y-5253 M [2] BOLT (M36X4X160-MM)  
13. 139-3788 [1] ROD AS  
14. 125-5192 [1] BEARING  
15. 2V-5656 [1] RING-SNAP  
16. 167-2419 C [1] SEAL-U-CUP  
17. 167-2240 C [1] SEAL AS-BUFFER  
18. 108-6216 [1] RING-WEAR  
19. 9S-4182 [1] PLUG (7/16-20-THD)  
20. 3J-7354 [1] SEAL-O-RING  
21. 9X-8259 [10] WASHER (39X66X6-MM THK)  
22. 107-9467 M [8] BOLT (M36X4X150-MM)  
23. 101-3672 M [8] BOLT (M36X4X120-MM)  
24. 167-2504 C [1] SEAL-WIPER  
25. 192-2054 C [2] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590581
 

108-2136: CYLINDER GP-BUCKET

108-2136 CYLINDER GP-BUCKET -FRONT SHOVEL
S/N 7LL1-34
254 MM (10 IN.) BORE X 2375 MM (93.5 IN.) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
AN ATTACHMENT
i00093921 SEBP2259
1082136 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-8011 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 5P-2235 [1] SEAL-O-RING  
4. 1U-3307 [1] RING-BACKUP  
5. 107-9423 [1] HEAD  
6. 124-5828 [1] ROD AS  
7. 107-9422 [2] BEARING  
8. 117-8865 [2] RING-WEAR  
9. 107-9467 M [6] BOLT (M36X4X150-MM)  
10. 3S-7023 [12] WASHER (34X57X6-MM THK)  
11. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
12. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
13. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
  7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
14. 108-0133 [1] SEAL  
15. 108-0134 [1] SEAL  
16. 6E-0172 [1] SEAL-U-CUP  
17. 8T-1794 [1] SEAL AS  
18. 120-5816 [1] PISTON  
19. 6E-0173 [1] RING-WEAR  
20. 3J-7354 [4] SEAL-O-RING  
21. 9S-4182 [4] PLUG (7/16-20-THD)  
22. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590582
 

115-5528: CYLINDER GP-BUCKET

115-5528 CYLINDER GP-BUCKET -MASS EXCAVATOR
S/N 7LL1-UP
PART OF 114-9525 STICK AR-MASS EXCAVATOR
AN ATTACHMENT
i00094117 SEBP2259
1155528 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-3692 [2] PIN  
2. 6I-7378 [4] COVER  
3. 8T-4193 M [16] BOLT (M16X2X50-MM)  
4. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
5. 116-0437 Y [1] CYLINDER GP-BUCKET (RH)(MASS EXCAVATOR)  
6. 116-0439 Y [1] CYLINDER GP-BUCKET (LH)(MASS EXCAVATOR)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22590583
 

116-0437: CYLINDER GP-BUCKET

116-0437 CYLINDER GP-BUCKET -MASS EXCAVATOR, RH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 MM (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 1
AN ATTACHMENT
i00094122 SEBP2259
1160437 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 M [6] BOLT (M36X4X150-MM)  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 114-5495 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 114-5494 [1] HEAD  
10. 124-6468 [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [2] RING-RETAINING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 6J-1700 [1] SEAL-U-CUP  
15. 8C-9130 [1] SEAL AS  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
21. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
22. 114-5499 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
24. 9S-4182 [2] PLUG (7/16-20-THD)  
25. 3J-7354 [2] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590584
 

116-0437: CYLINDER GP-BUCKET

116-0437 CYLINDER GP-BUCKET -MASS EXCAVATOR, RH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 MM (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 2
AN ATTACHMENT
i00476077 SEBP2259
1160437 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 M [6] BOLT (M36X4X150-MM)  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 114-5495 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 C [1] HEAD  
10. 135-7333 [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [1] RING-RETAINING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 136-7397 C [1] SEAL-U-CUP  
15. 135-1995 C [1] SEAL-BUFFER  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 8C-6799 C [1] RING-RETAINING  
21. 3J-7354 [2] SEAL-O-RING  
22. 114-5499 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
24. 9S-4182 [2] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590585
 

116-0437: CYLINDER GP-BUCKET

116-0437 CYLINDER GP-BUCKET -MASS EXCAVATOR, RH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 MM (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 3
AN ATTACHMENT
i00808668 SEBP2259
1160437 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 CM [4] BOLT (M36X4X150-MM)  
3. 5M-6666 C [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 157-8546 C [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 [1] HEAD  
10. 157-8548 C [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [2] RING-RETAINING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 136-7397 [1] SEAL-U-CUP  
15. 135-1995 [1] SEAL-BUFFER  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 8C-6799 [1] RING-RETAINING  
22. 146-6192 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590586
 

116-0437: CYLINDER GP-BUCKET

116-0437 CYLINDER GP-BUCKET -MASS EXCAVATOR, RH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 MM (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 4
AN ATTACHMENT
i01422719 SEBP2259
1160437 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 M [4] BOLT (M36X4X150-MM)  
3. 5M-6666 [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 172-3542 C [1] SEAL AS  
6. 157-8546 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 [1] HEAD  
10. 157-8548 [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [2] RING-RETAINING  
13. 167-2500 C [1] SEAL-WIPER  
14. 167-2352 C [1] SEAL-U-CUP  
15. 167-2233 C [1] SEAL AS  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 166-7726 C [2] RING-BACKUP  
22. 146-6192 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590587
 

116-0439: CYLINDER GP-BUCKET

116-0439 CYLINDER GP-BUCKET -MASS EXCAVATOR, LH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 1
AN ATTACHMENT
i00094123 SEBP2259
1160439 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-5499 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 114-5495 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 114-5494 [1] HEAD  
10. 124-6468 [1] ROD AS  
  103-8096 [2] RING-RETAINING  
  106-4550 [1] BEARING-ALIGNING (180-MM ID)  
11. 9S-4182 [2] PLUG (7/16-20-THD)  
12. 3J-7354 [2] SEAL-O-RING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 6J-1700 [1] SEAL-U-CUP  
15. 8C-9130 [1] SEAL AS  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
21. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
22. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
23. 107-9467 M [6] BOLT (M36X4X150-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590588
 

116-0439: CYLINDER GP-BUCKET

116-0439 CYLINDER GP-BUCKET -MASS EXCAVATOR, LH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 2
AN ATTACHMENT
i00476114 SEBP2259
1160439 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 M [6] BOLT (M36X4X150-MM)  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 114-5495 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 C [1] HEAD  
10. 135-7333 [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [1] RING-RETAINING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 136-7397 C [1] SEAL-U-CUP  
15. 135-1995 C [1] SEAL-BUFFER  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 8C-6799 C [1] RING-RETAINING  
21. 3J-7354 [2] SEAL-O-RING  
22. 114-5499 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
24. 9S-4182 [2] PLUG (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590589
 

116-0439: CYLINDER GP-BUCKET

116-0439 CYLINDER GP-BUCKET -MASS EXCAVATOR, LH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 3
AN ATTACHMENT
i00808669 SEBP2259
1160439 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 CM [4] BOLT (M36X4X150-MM)  
3. 5M-6666 C [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 157-8546 C [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 [1] HEAD  
10. 157-8548 C [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 C [2] RING-RETAINING  
13. 8C-9136 [1] SEAL-LIP TYPE  
14. 136-7397 [1] SEAL-U-CUP  
15. 135-1995 [1] SEAL-BUFFER  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 8C-6799 [1] RING-RETAINING  
22. 146-6192 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 5230 :

CYLINDER GP-BOOM
121-8909 CYLINDER GP-BOOM
CYLINDER GP-BOOM
115-5522 CYLINDER GP-BOOM
CYLINDER GP-BOOM
113-1923 CYLINDER GP-BOOM
CYLINDER GP-BOOM
113-1923 CYLINDER GP-BOOM
CYLINDER GP-BOOM
108-2137 CYLINDER GP-BOOM
CYLINDER & MTG GP-BUCKET
108-5772 CYLINDER & MTG GP-BUCKET
CYLINDER & MTG GP-BUCKET
108-5772 CYLINDER & MTG GP-BUCKET
COVER GP-VALVE
115-5518 COVER GP-VALVE
CYLINDER GP-BUCKET
108-2136 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
115-5528 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET

Truck sale:

1996 CAT 5230
Call 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
1996 CAT 5230
 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
CATERPILLAR 5230 1996
$302,500 USD 
CATERPILLAR 5230 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
1996 CAT 5230
USD $302,500 
1996 CAT 5230

CLEVELAND BROTHERS EQUIP CO - Harrisburg
Pittston, Pennsylvania
CAT 5230
USD $320,000 
CAT 5230

Robbins Equipment Co
Tucson, Arizona 85705
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.