AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

116-0439 CYLINDER GP-BUCKET -MASS EXCAVATOR, LH S/N 7LL1-UP 254 MM (10 IN.) BORE X 1925 (75.8 IN.) STROKE PART OF 115-5528 CYLINDER GP-BUCKET Type 4 AN ATTACHMENT 5230


HYDRAULIC SYSTEM
CYLINDER GP

MINING EXCAVATOR 5230 MINING EXCAVATOR 7LL
 5230 Excavator 7LL00001-UP (MACHINE) POWERED BY 3516 Engine SEBP2259 5230 7LL   (1993)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
127-0867 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
127-0867 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
130-5986 CYLINDER GP-BUCKET
 

#SEBP22590590
 

116-0439: CYLINDER GP-BUCKET

116-0439 CYLINDER GP-BUCKET -MASS EXCAVATOR, LH
S/N 7LL1-UP
254 MM (10 IN.) BORE X 1925 (75.8 IN.) STROKE
PART OF 115-5528 CYLINDER GP-BUCKET
Type 4
AN ATTACHMENT
i01422733 SEBP2259
1160439 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 107-9467 M [4] BOLT (M36X4X150-MM)  
3. 5M-6666 [4] WASHER (38.5X55.3X5-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 172-3542 C [1] SEAL AS  
6. 157-8546 [1] PISTON  
7. 5P-2235 [1] SEAL-O-RING  
8. 1U-3307 [1] RING-BACKUP  
9. 136-4576 [1] HEAD  
10. 157-8548 [1] ROD AS  
11. 106-4550 [1] BEARING-ALIGNING (180-MM ID)  
12. 103-8096 [2] RING-RETAINING  
13. 167-2500 C [1] SEAL-WIPER  
14. 167-2352 C [1] SEAL-U-CUP  
15. 167-2233 C [1] SEAL AS  
16. 8T-6749 [1] RING-WEAR  
17. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
18. 3S-7023 [12] WASHER (34X57X6-MM THK)  
19. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
20. 166-7726 C [2] RING-BACKUP  
22. 146-6192 [1] CYLINDER AS  
23. 107-9422 [2] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590591
 

127-0867: CYLINDER GP-BUCKET

127-0867 CYLINDER GP-BUCKET -FRONT SHOVEL
S/N 7LL35-82
254 MM (10 IN) BORE X 2375 MM (93.5 IN) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
AN ATTACHMENT
i00094198 SEBP2259
1270867 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-0869 [1] CYLINDER AS  
  107-9422 [2] BEARING  
2. 127-0871 [1] PISTON  
3. 5P-2235 [1] SEAL-O-RING  
4. 1U-3307 [1] RING-BACKUP  
5. 107-9423 [1] HEAD  
6. 130-7764 [1] ROD AS  
  107-9422 [2] BEARING  
7. 8T-1794 [1] SEAL AS  
8. 117-8865 [2] RING-WEAR  
9. 107-9467 M [6] BOLT (M36X4X150-MM)  
10. 3S-7023 [12] WASHER (34X57X6-MM THK)  
11. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
12. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
13. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
14. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
15. 108-0134 [1] SEAL  
16. 6E-0172 [1] SEAL-U-CUP  
17. 108-0133 [1] SEAL  
18. 6E-0173 [1] RING-WEAR  
19. 9S-4182 [4] PLUG (7/16-20-THD)  
20. 3J-7354 [4] SEAL-O-RING  
21. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590592
 

127-0867: CYLINDER GP-BUCKET

127-0867 CYLINDER GP-BUCKET -FRONT SHOVEL
S/N 7LL83-UP
254 MM (10 IN) BORE X 2375 MM (93.5 IN) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
AN ATTACHMENT
i00719648 SEBP2259
1270867 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-0869 [1] CYLINDER AS  
  107-9422 [2] BEARING  
2. 127-0871 [1] PISTON  
3. 5P-2235 [1] SEAL-O-RING  
4. 1U-3307 [1] RING-BACKUP  
5. 136-7359 C [1] SEAL-BUFFER  
6. 130-7764 [1] ROD AS  
  107-9422 [2] BEARING  
7. 8T-1794 [1] SEAL AS  
8. 117-8865 [2] RING-WEAR  
9. 107-9467 M [6] BOLT (M36X4X150-MM)  
10. 3S-7023 [12] WASHER (34X57X6-MM THK)  
11. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
12. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
13. 136-7398 C [1] SEAL-U-CUP  
14. 9X-1802 C [1] RING-RETAINING  
15. 108-0134 [1] SEAL  
16. 136-8499 C [1] HEAD  
17. 6E-0173 [1] RING-WEAR  
18. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590593
 

130-5986: CYLINDER GP-BUCKET

130-5986 CYLINDER GP-BUCKET -FRONT SHOVEL BOTTOM DUMP
S/N 7LL1-104
196.85 MM (7.75 IN.) BORE X 520 MM (20.47 IN.) STROKE
PART OF 108-5772 CYLINDER & MTG GP-BUCKET
AN ATTACHMENT
i00558394 SEBP2259
1305986 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-5987 [1] CYLINDER AS  
1A. 3E-9400 [2] RING-RETAINING  
1B. 9U-9560 [1] BEARING  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 9J-5037 [1] RING-WEAR  
4. 8T-1792 [1] SEAL AS  
5. 130-5989 [1] PISTON  
6. 5K-1787 [1] SEAL-O-RING  
7. 8J-0548 [1] RING-BACKUP  
8. 8C-4892 [1] SEAL-HEAD  
9. 130-5991 [1] HEAD  
10. 130-5988 [1] ROD AS  
10A. 6E-6414 [2] BEARING  
11. 9X-3580 [1] SEAL-LIP TYPE  
12. 6J-1450 [1] SEAL-U-CUP  
13. 8C-9144 [1] SEAL AS  
14. 9X-3579 [1] RING-WEAR  
15. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
16. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
17. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
18. 6V-5845 M [8] BOLT (M20X2.5X70-MM)  
19. 8T-3282 [10] WASHER-HARD (22X35X3.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590594
 

130-5986: CYLINDER GP-BUCKET

130-5986 CYLINDER GP-BUCKET -FRONT SHOVEL BOTTOM DUMP
S/N 7LL105-UP
196.85 MM (7.75 IN.) BORE X 520 MM (20.47 IN.) STROKE
PART OF 108-5772 CYLINDER & MTG GP-BUCKET
AN ATTACHMENT
i01545782 SEBP2259
1305986 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-5987 [1] CYLINDER AS  
1A. 3E-9400 [2] RING-RETAINING  
1B. 9U-9560 [1] BEARING  
2. 7J-9250 [1] LOCKNUT (3-1/4X12-THD)  
3. 9J-5037 [1] RING-WEAR  
4. 192-1450 C [1] SEAL AS  
5. 130-5989 [1] PISTON  
6. 5K-1787 [1] SEAL-O-RING  
7. 8J-0548 [1] RING-BACKUP  
8. 8C-4892 [1] SEAL-HEAD  
9. 130-5991 [1] HEAD  
10. 130-5988 [1] ROD AS  
10A. 6E-6414 [2] BEARING  
11. 167-2487 C [1] SEAL-WIPER  
12. 167-2336 C [1] SEAL-U-CUP  
13. 167-2220 C [1] SEAL AS-BUFFER  
14. 9X-3579 [1] RING-WEAR  
15. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
16. 6V-5845 M [8] BOLT (M20X2.5X70-MM)  
17. 8T-3282 [10] WASHER-HARD (22X35X3.5-MM THK)  
18. 192-2055 C [2] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590595
 

6E-6435: CYLINDER GP-BUCKET

6E-6435 CYLINDER GP-BUCKET -FRONT SHOVEL BOTTOM DUMP
S/N 7LL1-UP
184MM (7.25IN) BORE X 525MM (20.7IN) STROKE
PART OF 108-5772 CYLINDER & MTG GP-BUCKET
AN ATTACHMENT
i00093774 SEBP2259
6E6435 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6428 [1] CYLINDER AS  
1A. 3E-9400 [2] RING-RETAINING  
1B. 9U-9560 [1] BEARING  
2. 119-5745 [1] WASHER  
3. 1J-2674 [1] RING-WEAR  
4. 8C-5245 [1] RING-WEAR  
5. 8C-9127 [1] SEAL AS  
6. 5P-7593 [1] SEAL-O-RING  
7. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
8. 5J-8350 [1] SEAL-U-CUP  
9. 8C-5219 [1] SEAL-LIP TYPE  
10. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
11. 8T-3282 [10] WASHER-HARD (22X35X3.5-MM THK)  
12. 122-9125 [1] ROD AS  
13. 6E-6414 [2] BEARING  
14. 8T-1790 [1] SEAL AS  
15. 6V-5845 M [8] BOLT (M20X2.5X70-MM)  
16. 119-1036 [1] HEAD  
17. 8T-8381 [1] SEAL  
18. 6E-6112 [1] PISTON  
19. 1U-1738 [1] RING-BACKUP  
20. 6V-5215 M [3] BOLT (M8X1.25X16-MM)  
  7S-6369 [3] WASHER (0.344X0.75X0.188-IN THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590596
 

108-2135: CYLINDER GP-STICK

108-2135 CYLINDER GP-STICK -FRONT SHOVEL
S/N 7LL1-34
254MM (10IN) BORE X 2375MM (93.5IN) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
AN ATTACHMENT
i00093920 SEBP2259
1082135 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-5163 [1] CYLINDER AS  
2. 107-9422 [2] BEARING  
3. 3S-7023 [12] WASHER (34X57X6-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 120-5815 [1] PISTON  
7. 107-9423 [1] HEAD  
8. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
  7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
9. 6E-0173 [1] RING-WEAR  
10. 124-5231 [1] ROD AS  
11. 107-9422 [2] BEARING  
12. 5P-2235 [1] SEAL-O-RING  
13. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
14. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
15. 108-0134 [1] SEAL  
16. 6E-0172 [1] SEAL-U-CUP  
17. 108-0133 [1] SEAL  
18. 107-9467 M [6] BOLT (M36X4X150-MM)  
19. 1U-3307 [1] RING-BACKUP  
20. 9S-4182 [4] PLUG (7/16-20-THD)  
21. 3J-7354 [4] SEAL-O-RING  
22. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590597
 

113-1924: CYLINDER GP-STICK

113-1924 CYLINDER GP-STICK -MASS EXCAVATOR
S/N 7LL1-UP
279.4MM (10.99 IN) X 2350 (92.52 IN) STROKE
PART OF 115-5519 INSTALLATION AR-FIELD
Type 1
AN ATTACHMENT
i00094091 SEBP2259
1131924 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-4123 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 6E-0249 [2] RING-WEAR  
5. 108-0125 [1] SEAL AS  
6. 120-7675 [1] PISTON  
7. 109-5702 [1] SEAL-O-RING  
8. 108-0129 [1] RING-BACKUP  
9. 107-6235 [1] HEAD  
10. 124-5232 [1] ROD AS  
11. 107-6232 [2] BEARING  
12. 3J-7354 [4] SEAL-O-RING  
13. 101-0767 M [2] BOLT (M36X4X150-MM)  
14. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
15. 9X-6152 M [8] BOLT (M36X4X130-MM)  
16. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
17. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
18. 108-0132 [1] SEAL  
19. 7J-3322 [1] SEAL-U-CUP  
20. 108-0131 [1] SEAL  
21. 108-0130 [1] RING  
22. 107-9467 M [6] BOLT (M36X4X150-MM)  
23. 9S-4182 [4] PLUG (7/16-20-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590598
 

113-1924: CYLINDER GP-STICK

113-1924 CYLINDER GP-STICK -MASS EXCAVATOR
S/N 7LL1-UP
279.4MM (10.99 IN) X 2350 (92.52 IN) STROKE
PART OF 115-5519 INSTALLATION AR-FIELD
Type 2
AN ATTACHMENT
i00473230 SEBP2259
1131924 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-9856 [1] CYLINDER AS  
2. 107-6232 [2] BEARING  
3. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
4. 6E-0249 [2] RING-WEAR  
5. 174-0344 [1] SEAL AS  
6. 120-7675 [1] PISTON  
7. 109-5702 [1] SEAL-O-RING  
8. 108-0129 [1] RING-BACKUP  
9. 136-4575 C [1] HEAD  
10. 124-5232 [1] ROD AS  
  095-0908 [1] PIN-TAPERED  
11. 107-6232 [2] BEARING  
12. 108-0130 [1] RING  
13. 101-0767 M [2] BOLT (M36X4X150-MM)  
14. 3S-6162 [10] WASHER-HARD (40.5X67X6-MM THK)  
15. 9X-6152 M [8] BOLT (M36X4X130-MM)  
16. 107-9467 M [6] BOLT (M36X4X150-MM)  
17. 3E-4371 C [1] RING-RETAINING  
18. 108-0132 [1] SEAL  
19. 136-7399 C [1] SEAL-U-CUP  
20. 135-1997 C [1] SEAL-BUFFER  
21. 157-6961 [2] RING-BACKUP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22590599
 

127-0865: CYLINDER GP-STICK

127-0865 CYLINDER GP-STICK -FRONT SHOVEL
S/N 7LL35-83
254 MM (10 IN) BORE X 2375 MM (93.5 IN) STROKE
PART OF 108-5783 SHOVEL AR-FRONT
AN ATTACHMENT
i00094197 SEBP2259
1270865 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-0868 [1] CYLINDER AS  
  107-9422 [2] BEARING  
2. 107-9467 M [6] BOLT (M36X4X150-MM)  
3. 3S-7023 [12] WASHER (34X57X6-MM THK)  
4. 117-8865 [2] RING-WEAR  
5. 8T-1794 [1] SEAL AS  
6. 127-0871 [1] PISTON  
7. 107-9423 [1] HEAD  
8. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
9. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
10. 130-7613 [1] ROD AS  
  095-0908 [1] PIN-TAPERED  
  107-9422 [2] BEARING  
11. 1U-3307 [1] RING-BACKUP  
12. 5P-2235 [1] SEAL-O-RING  
13. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
14. 8T-0283 M [10] BOLT (M30X3.5X110-MM)  
15. 108-0134 [1] SEAL  
16. 6E-0172 [1] SEAL-U-CUP  
17. 108-0133 [1] SEAL  
18. 6E-0173 [1] RING-WEAR  
19. 9S-4182 [4] PLUG (7/16-20-THD)  
20. 3J-7354 [4] SEAL-O-RING  
21. 5M-6666 [6] WASHER (38.5X55.3X5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 5230 :

CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0439 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
116-0437 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
115-5528 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
127-0867 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
127-0867 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
130-5986 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
130-5986 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
6E-6435 CYLINDER GP-BUCKET
CYLINDER GP-STICK
108-2135 CYLINDER GP-STICK
CYLINDER GP-STICK
113-1924 CYLINDER GP-STICK
CYLINDER GP-STICK
113-1924 CYLINDER GP-STICK

Truck sale:

1996 CAT 5230
Call 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
1996 CAT 5230
 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
CATERPILLAR 5230 1996
$302,500 USD 
CATERPILLAR 5230 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
1996 CAT 5230
USD $302,500 
1996 CAT 5230

CLEVELAND BROTHERS EQUIP CO - Harrisburg
Pittston, Pennsylvania
CAT 5230
USD $320,000 
CAT 5230

Robbins Equipment Co
Tucson, Arizona 85705
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.