AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

124-8777 TIP GP-PENETRATION S/N 7LL1-UP V780. VERTICAL PIN FOR USE WITH MASS EXCAVATING BUCKET AN ATTACHMENT 5230


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP

MINING EXCAVATOR 5230 MINING EXCAVATOR 7LL
 5230 Excavator 7LL00001-UP (MACHINE) POWERED BY 3516 Engine SEBP2259 5230 7LL   (1993)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
253-0057 TIP GP-LONG
TIP GP-PENETRATION
109-2687 TIP GP-PENETRATION
124-8777 TIP GP-PENETRATION
131-0107 TIP GP-PENETRATION
TIP GP-PENETRATION
143-3099 TIP GP-PENETRATION
TIP GP-SHORT
107-3292 TIP GP-SHORT
 

#SEBP22591090
 

124-8777: TIP GP-PENETRATION

124-8777 TIP GP-PENETRATION
S/N 7LL1-UP
V780. VERTICAL PIN
FOR USE WITH MASS EXCAVATING BUCKET
AN ATTACHMENT
i00091236 SEBP2259
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  132-4788 [1] PIN  
  132-4789 [1] SLEEVE-RETAINING  
  124-8789 [1] TIP-PENETRATION  
 

#SEBP22591091
 

131-0107: TIP GP-PENETRATION

131-0107 TIP GP-PENETRATION
S/N 7LL1-UP
ONE PIECE
AN ATTACHMENT
i00094219 SEBP2259
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  138-0100 [1] PIN  
  132-1107 [1] RETAINER AS  
  132-1109 [1] RETAINER AS  
  5M-6666 [2] WASHER (38.5X55.3X5-MM THK)  
  131-0106 [1] TIP-PENETRATION  
 

#SEBP22591092
 

143-3099: TIP GP-PENETRATION

143-3099 TIP GP-PENETRATION
S/N 7LL1-UP
VERTICAL PIN
AN ATTACHMENT
i00699921 SEBP2259
1433099 TIP GP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-3109 [1] TIP-PENETRATION  
2. 138-0101 [1] PIN  
3. 140-6889 [1] RETAINER AS  
 

#SEBP22591093
 

107-3292: TIP GP-SHORT

107-3292 TIP GP-SHORT
S/N 7LL1-UP
V1000. VERTICAL PIN
AN ATTACHMENT
i00093906 SEBP2259
1073292 TIP GP-SHORT Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-1100 [1] COUPLER-TIP  
2. 132-1101 [1] TIP-SHORT  
3. 138-0101 [1] PIN  
4. 138-0100 [1] PIN  
5. 132-1107 [2] RETAINER AS  
6. 140-6889 [2] RETAINER AS  
 

#SEBP22591094
 

132-1105: TIP-PENETRATION

132-1105 TIP-PENETRATION
S/N 7LL1-UP
V1000. VERTICAL PIN
FIELD INSTALLATION
i00748484 SEBP2259
1321105 TIP-PENETRATION Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP22591095
 

106-4052: AIR CONDITIONER & MOUNTING GP

106-4052 AIR CONDITIONER & MOUNTING GP
S/N 7LL1-98
PART OF 108-2482 ENCLOSURE AR
i00090993 SEBP2259
1064052 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8536 [2] CLAMP  
2. 7I-5340 [1] HOSE  
3. 7I-5247 [1] HOSE  
4. 5P-0600 [2] CLAMP-HOSE  
5. 7I-5339 [1] HOSE  
6. 5P-3860 [2] CLAMP-HOSE  
7. 100-6925 Y [1] AIR CONDITIONER GP  
8. 7I-5341 [1] BRACKET AS  
9. 9X-7380 [2] SEAL-O-RING  
10. 5P-6129 BD TUBE  
11. 9X-4994 [2] CONNECTOR  
12. 130-2991 E [2] HOSE (499.5-CM EACH)  
13. 5D-1026 [4] CLAMP-BAND  
14. 8X-6319 [1] CLAMP  
15. 8R-3393 [1] STRAP  
16. 101-8789 [1] ACCUMULATOR-REFRIGERANT  
17. 7I-5349 I [1] HOSE AS  
18. 7I-5352 I [1] HOSE AS  
19. 103-6100 [2] FITTING AS-AIR CONDITIONER (QUICK DISCONNECT)  
    (EACH INCLUDES)
  9X-7382 [2] SEAL-O-RING  
20. 7X-2049 [1] TUBE AS  
  175-7162 [1] DRYER AS-REFRIGERANT (IN-LINE)  
21. 5P-7471 [1] CLIP (TAB)  
22. 5P-7470 [1] CLIP (SLOT)  
23. 7I-5351 I [1] HOSE AS  
24. 9M-8406 [7] CLIP (LOOP)  
25. 6D-1641 [8] CLIP (LOOP)  
26. 9X-8250 [7] CLIP  
27. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
29. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
30. 7I-5350 I [1] HOSE AS  
31. 6P-8855 [2] SPACER-TUBE  
32. 5P-3945 [1] CAP  
33. 5P-3928 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
  107-4395 [1] VALVE AS  
  107-4396 [1] GASKET  
34. 5P-3950 [1] CAP  
35. 7K-3176 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
  107-4393 [1] VALVE AS  
  107-4394 [1] GASKET  
36. 8T-4133 M [5] NUT (M10X1.5-THD)  
37. 7I-5268 [1] PLATE  
38. 069-5341 [5] MOUNT  
39. 7X-7729 [15] WASHER (11X25X3-MM THK)  
40. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
41. 7I-5354 [1] ANGLE  
43. 7K-3304 [1] NUT-JAM (1-20-THD)  
44. 5P-4107 [1] LOCKWASHER  
45. 5P-4106 [1] NUT (1-7/16-16-THD)  
46. 5P-4961 [4] CLAMP-HOSE  
47. 034-1432 [2] STRAP-CABLE  
48. 4P-7581 [1] CLIP (LADDER)  
49. 5P-5969 BD SEAL  
50. 8S-7583 [2] GROMMET  
51. 5P-0765 E HOSE (60CM)  
52. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
53. 9X-7381 [1] SEAL-O-RING  
54. 9X-7382 [1] SEAL-O-RING  
55. 9X-7383 [3] SEAL-O-RING  
56. 6G-2263 [5] SPACER (10.5X19X28.5-MM THK)  
57. 9X-7384 [1] SEAL-O-RING  
58. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
59. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
60. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22591096
 

159-4556: AIR CONDITIONER & MOUNTING GP

159-4556 AIR CONDITIONER & MOUNTING GP
S/N 7LL99-UP
PART OF 108-2482 ENCLOSURE AR
i01087726 SEBP2259
1594556 AIR CONDITIONER & MOUNTING GP Parts scheme 1594556 AIR CONDITIONER & MOUNTING GP Parts scheme 1594556 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8536 [2] CLAMP  
2. 158-5100 [1] HOSE  
3. 158-5101 [1] HOSE  
4. 5P-0600 [2] CLAMP-HOSE  
5. 158-5102 [1] HOSE  
6. 5P-3860 [2] CLAMP-HOSE  
7. 130-2007 Y [1] AIR CONDITIONER GP  
8. 133-8767 [1] BRACKET AS  
9. 5P-0765 BE HOSE  
10. 5P-6129 BD TUBE  
11. 9X-4994 [2] CONNECTOR  
12. 136-1953 BE HOSE  
13. 5D-1026 [4] CLAMP-BAND  
14. 8X-6319 [1] CLAMP  
15. 8R-3393 [1] STRAP  
16. 151-5261 [1] ACCUMULATOR-REFRIGERANT  
17. 133-8660 I [1] HOSE AS  
18. 103-6100 [2] FITTING AS-AIR CONDITIONER (QUICK DISCONNECT)  
    (EACH INCLUDES)
  9X-7382 [2] SEAL-O-RING  
19. 3E-3535 [1] DRYER AS-REFRIGERANT (IN-LINE)  
20. 5P-7471 [1] CLIP (TAB)  
21. 5P-7470 [1] CLIP (SLOT)  
22. 7I-5351 I [1] HOSE AS  
23. 9M-8406 [14] CLIP (LOOP)  
24. 6D-1641 [8] CLIP (LOOP)  
25. 9X-8250 [2] CLIP  
26. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
28. 8T-4137 M [13] BOLT (M10X1.5X20-MM)  
29. 133-8663 I [1] HOSE AS  
30. 6P-8855 [2] SPACER-TUBE  
31. 125-9849 [1] GUARD  
33. 7K-3176 [2] COUPLING AS-REFRIGERANT (SELF-SEALING)  
    (EACH INCLUDES)
  107-4393 [1] VALVE AS  
  107-4394 [1] GASKET  
34. 8T-4133 M [7] NUT (M10X1.5-THD)  
35. 7I-5268 [1] PLATE  
36. 069-5341 [5] MOUNT  
37. 7X-7729 [19] WASHER (11X25X3-MM THK)  
38. 8T-4186 M [6] BOLT (M10X1.5X40-MM)  
39. 7I-5354 [1] ANGLE  
40. 7K-3304 [2] NUT-JAM (1-20-THD)  
41. 5P-4961 [4] CLAMP-HOSE  
42. 034-1432 [4] STRAP-CABLE  
43. 4P-7581 [2] CLIP (LADDER)  
44. 5P-5969 BD SEAL  
45. 8S-7583 [2] GROMMET  
46. 9X-7383 [4] SEAL-O-RING  
47. 9X-7380 [2] SEAL-O-RING  
48. 9X-7381 [2] SEAL-O-RING  
49. 9X-7382 [3] SEAL-O-RING  
50. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
51. 6G-2263 [5] SPACER (10.5X19X28.5-MM THK)  
52. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
53. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
54. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
57. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
58. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
59. 8T-4244 M [1] NUT (M12X1.75-THD)  
60. 6T-5105 [1] PLATE  
61. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
62. 7X-0491 [3] BOLT (5/16-24X0.625-IN)  
63. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
64. 133-8647 [1] BRACKET AS  
64A. 8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
65. 1P-9744 [1] V-BELT  
66. 158-2942 [1] PULLEY  
67. 158-2943 [1] BUSHING  
68. 4S-5780 [1] ROD  
69. 8T-4193 M [1] BOLT (M16X2X50-MM)  
70. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
71. 8S-5383 [1] BLOCK  
72. 7X-0448 [2] NUT (5/8-11-THD)  
73. 8T-6868 M [6] BOLT (M12X1.75X80-MM)  
74. 7X-0590 [6] WASHER-HARD (13.5X44.5X6-MM THK)  
75. 037-5613 [6] MOUNT  
76. 6V-8997 [2] UNION  
77. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
78. 9X-8258 [2] WASHER (33X56X6-MM THK)  
79. 6V-9746 [11] SEAL-O-RING  
81. 5U-6758 [1] MOTOR GP-HYDRAULIC  
82. 8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
83. 6V-8784 [1] TEE-FACE SEAL  
84. 3D-2824 [3] SEAL-O-RING  
85. 124-7458 I [1] HOSE AS  
86. 7X-3187 [1] BOLT (3/8-24X2.25-IN)  
87. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
88. 3E-4054 [1] FITTING AS-AIR CONDITIONER  
  3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
  3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
89. 9X-7385 [2] SEAL-O-RING  
90. 6T-5104 [1] PLATE  
91. 4L-6454 [2] BOLT (3/8-16X1-IN)  
92. 147-0392 Y [1] COMPRESSOR GP-REFRIGERANT  
93. 3E-4060 [1] FITTING AS-COMPRESSOR  
93A. 2L-1224 [1] CAP-SEAL (HIGH SIDE)  
  3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
  3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
94. 114-0058 [1] PLATE-INSTRUCTION  
95. 7K-1181 [1] STRAP-CABLE  
96. 125-8835 I [1] HOSE AS  
97. 124-5953 I [1] HOSE AS  
98. 158-2940 I [2] HOSE AS  
99. 5P-7815 [2] SEAL-O-RING  
100. 4S-6679 [2] ADAPTER  
101. 3K-0360 [1] SEAL-O-RING  
102. 6V-8397 [2] SEAL-O-RING  
103. 6V-8634 [1] CONNECTOR  
104. 6V-9007 [1] ELBOW  
105. 139-2626 I [1] HOSE AS  
106. 157-8510 [1] ADAPTER  
107. 5P-8112 [6] GROMMET  
108. 5P-7466 [6] CLIP (SLOT)  
109. 5P-7467 [6] CLIP (TAB)  
110. 6V-8994 [1] UNION (STRAIGHT)  
111. 6V-9168 [1] NUT (11/16-16-THD)  
113. 128-6847 [1] VALVE-CHECK (A/C)(DIRECTIONAL)  
114. 132-8544 I [1] HOSE AS  
115. 6V-0683 [2] GROMMET  
116. 5P-7463 [2] CLIP (TAB)  
117. 5P-7462 [2] CLIP (SLOT)  
118. 6V-9839 [1] TEE-SWIVEL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22591097
 

100-6925: AIR CONDITIONER GP

100-6925 AIR CONDITIONER GP
S/N 7LL1-98
PART OF 106-4052 AIR CONDITIONER & MOUNTING GP
Type 1
i00090829 SEBP2259
1006925 AIR CONDITIONER GP Parts scheme 1006925 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-7643 [1] COIL AS-HEATER  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
2. 113-7644 [1] COIL AS-EVAPORATOR  
3. 9X-9363 J [1] MOTOR AS  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
4. 8P-5141 [2] PLATE-ORIFICE  
5. 3E-0064 [2] ANGLE  
6. 3E-0062 [1] PLATE  
7. 7X-6021 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
8. 3E-1839 [1] SEAL  
9. 3E-0401 [1] HOUSING AS  
  9G-9150 [1] CLIP  
10. 112-7143 [1] CASE AS  
11. 8T-5413 M [1] STUD-WELD (M10X1.5X25-MM)  
12. 1L-9080 [2] BOLT (7/16-20X1.5-IN)  
13. 6V-9632 M [3] NUT-WELD (M6X1-THD)  
14. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
15. 6V-8843 E HOSE (116CM)  
16. 8T-0154 [6] CLAMP-HOSE  
17. 1P-6522 [1] GROMMET  
18. 7X-0490 M [1] BOLT (M6X1X200-MM)  
19. 3E-0400 [2] WHEEL AS-BLOWER  
20. 9X-2185 [4] SCREW (8-15X0.44-IN)  
21. 3E-6406 [1] CONTROL AS-BOARD  
  9G-3678 [1] HOUSING AS-RECEPTACLE  
  9G-3672 [1] HOUSING AS-CONNECTOR  
  7N-7780 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [5] SOCKET-CONNECTOR (14-GA TO 18-GA)  
22. 6P-8855 [2] SPACER-TUBE  
23. 7G-8116 [2] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)  
24. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
25. 9X-4383 [1] RESISTOR  
26. 8C-4586 [2] CLAMP  
27. 5P-5637 DB SEAL  
28. 111-1696 [1] VALVE AS-ELECTRONIC  
    (CONTROLS FLOW OF WATER THROUGH HEATER CORE)
29. 113-7642 [1] HARNESS AS  
30. 8T-4138 M [6] BOLT (M6X1X20-MM)  
31. 8T-4133 M [1] NUT (M10X1.5-THD)  
32. 8C-8451 M [1] BOLT (M6X1X40-MM)  
33. 9X-8498 M [3] BOLT (M6X1X180-MM)  
34. 9X-2044 M [17] SCREW-TRUSS HEAD (M6X1X16-MM)  
35. 8T-4205 [25] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
37. 5C-2890 M [12] NUT (M6X1-THD)  
38. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)(BLOWER WHEEL ROTATION)  
39. 113-7782 [1] COVER AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  7K-4201 [4] NUT-SPEED  
40. 3B-4501 [2] LOCKWASHER  
41. 2R-2376 [4] WASHER (7X16X0.8-MM THK)  
42. 7K-3262 [4] SCREW (THUMB)  
43. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
44. 112-7151 [1] PLATE  
45. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
46. 113-8114 [1] GROMMET  
47. 115-3018 [1] GROMMET  
48. 111-1701 [1] GASKET  
49. 5P-5639 DB SEAL  
50. 5P-5637 DB SEAL  
51. 8C-4120 [1] FILTER ELEMENT AS-CAB AIR  
52. 3E-0068 [1] TUBE AS  
53. 068-8993 [2] GROMMET  
54. 9X-8117 [2] TUBE AS  
    (EACH INCLUDES)
  7T-9793 [1] VALVE-CHECK  
55. 5P-6670 [1] FILM-INSTRUCTION (WATER IN, WATER OUT)  
   
    AVAILABLE REPAIR KIT(S):
  J [1] KIT-BRUSH  
    INCLUDES PLUG & BRUSH AS
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J IS AVAILABLE FOR PART MARKED J
  M   METRIC PART
 

#SEBP22591098
 

100-6925: AIR CONDITIONER GP

100-6925 AIR CONDITIONER GP
S/N 7LL1-98
PART OF 106-4052 AIR CONDITIONER & MOUNTING GP
Type 2
i00090830 SEBP2259
1006925 AIR CONDITIONER GP Parts scheme 1006925 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-7643 [1] COIL AS-HEATER  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
2. 113-7644 [1] COIL AS-EVAPORATOR  
3. 174-1494 [1] MOTOR AS-BLOWER (24-VOLT, A/C, HEATER)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 8P-5141 [2] PLATE-ORIFICE  
5. 3E-0064 [2] ANGLE  
6. 3E-0062 [1] PLATE  
7. 112-7151 [1] PLATE  
8. 3E-1839 [1] SEAL  
9. 1P-6522 [2] GROMMET  
10. 115-3018 [1] GROMMET  
11. 111-1701 [1] GASKET  
12. 5P-5639 DB SEAL (0.9-M)  
13. 136-1953 E HOSE (56-CM)  
13A. 136-1953 E HOSE (49-CM)  
13B. 136-1953 E HOSE (11-CM)  
14. 8C-4120 [1] FILTER ELEMENT AS-CAB AIR  
15. 9X-2488 [6] CLAMP-HOSE  
16. 7X-0490 M [1] BOLT (M6X1X200-MM)  
17. 3E-0400 [2] WHEEL AS-BLOWER  
    (EACH INCLUDES)
  037-4838 [1] CLAMP  
18. 9X-2185 [4] SCREW (8-15X0.44-IN)  
19. 5P-6670 [1] FILM-INSTRUCTION (WATER IN, WATER OUT)  
20. 6P-8855 [2] SPACER-TUBE  
21. 7G-8116 [2] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)  
22. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
23. 9X-8117 [2] TUBE AS  
24. 068-8993 [1] GROMMET  
25. 5P-5637 BD SEAL (0.3-M EACH)  
25A. 5P-5637 BD SEAL (0.3-M EACH)  
25B. 5P-5637 BD SEAL (0.4-M EACH)  
25C. 5P-5637 BD SEAL (0.2-M EACH)  
26. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
27. 113-7642 [1] HARNESS AS  
28. 8T-4138 M [6] BOLT (M6X1X20-MM)  
29. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
30. 6V-7728 M [1] BOLT (M6X1X45-MM)  
31. 9X-8498 M [3] BOLT (M6X1X180-MM)  
32. 9X-2044 CM [15] SCREW-TRUSS HEAD (M6X1X16-MM)  
33. 8T-4205 C [23] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
35. 5C-2890 CM [10] NUT (M6X1-THD)  
36. 8T-4133 M [1] NUT (M10X1.5-THD)  
37. 242-0677 [1] VALVE AS-WATER  
38. 6V-7743 M [4] LOCKNUT (M6X1-THD)  
39. 7K-3262 [4] SCREW (THUMB)  
40. 2R-2376 [4] WASHER (7X16X0.8-MM THK)  
41. 3B-4501 [2] LOCKWASHER  
42. 113-7782 [1] COVER AS  
  7K-4201 [4] NUT-SPEED  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  C [18] RIVET-POP  
43. 8C-4586 [2] CLAMP  
44. 9X-4383 [1] RESISTOR  
45. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)(THERMOSTAT)  
    (BLOWER WHEEL ROTATION)
46. 205-4285 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
47. 112-7143 [1] CASE AS  
  1L-9080 [2] BOLT (7/16-20X1.5-IN)  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
  8T-5413 M [1] STUD-WELD (M10X1.5X25-MM)  
48. 3E-0401 [1] HOUSING AS  
  7T-1099 [1] LINK  
  8P-5141 [2] PLATE-ORIFICE  
49. 7X-6021 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
50. 5L-6234 C [3] SPACER (0.281X0.75X0.5-IN THK)  
51. 3S-2093 [3] STRAP-CABLE  
52. 5P-0878 H SEAL (1.2-DM)  
53. 239-5611 [1] BRACKET AS  
54. 241-7692 [1] HARNESS AS-WIRING (VOLTAGE CONVERTER)  
55. 241-7693 [1] HARNESS AS-POWER  
56. 8T-0285 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
57. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
58. 239-9368 [1] RESISTOR AS  
59. 4P-7581 [2] CLIP (LADDER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP22591099
 

130-2007: AIR CONDITIONER GP

130-2007 AIR CONDITIONER GP
S/N 7LL99-UP
PART OF 159-4556 AIR CONDITIONER & MOUNTING GP
i00500264 SEBP2259
1302007 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 5230 MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-2376 [2] WASHER (7X16X0.8-MM THK)  
2. 3B-4501 [2] LOCKWASHER  
3. 3E-5464 [1] SWITCH AS-THERMOSTAT (HVAC)(AIR CONDITIONER)  
4. 3S-2093 [3] STRAP-CABLE  
5. 7G-8116 [2] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)(A/C PRIMARY)  
6. 7K-3262 [2] SCREW (THUMB)  
7. 7T-5856 [4] CLAMP  
8. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
9. 9X-2185 [4] SCREW (8-15X0.44-IN)  
10. 9X-2488 [2] CLAMP-HOSE  
11. 9X-4383 [1] RESISTOR  
12. 9X-8117 [2] TUBE AS  
13. 141-9784 M [1] BOLT (M6X1X190-MM)  
14. 145-4749 [1] COIL AS-HEATER  
15. 145-4750 [1] COIL AS-EVAPORATOR  
16. 145-4751 [1] PLATE  
17. 145-4752 [1] COVER  
18. 145-4753 [1] ANGLE  
19. 145-4754 [2] WHEEL-BLOWER  
20. 145-4755 [1] GASKET  
21. 145-4756 [1] GASKET  
22. 145-4757 [1] GASKET  
23. 145-4758 [1] FILTER ELEMENT-CAB AIR (AIR CONDITIONING)  
24. 145-4759 [1] GASKET  
25. 145-4760 [1] GASKET  
26. 145-4761 [1] GASKET  
27. 145-4762 [4] PLATE-ORIFICE  
28. 145-4763 [1] HARNESS AS (BLOWER MOTOR)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
29. 145-4764 [1] BLOWER AS  
30. 145-4765 [1] COVER AS  
31. 145-4767 [1] CASE AS  
32. 145-4768 [1] GASKET  
33. 146-3506 [2] MOTOR AS  
    (EACH INCLUDES)
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & PART MARKED J)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
34. 205-4285 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)(HEATER, AIR CONDITIONER)  
35. 239-5534 [1] VALVE AS-WATER (ELECTRONIC)  
36. 239-5611 [1] BRACKET AS  
37. 239-9368 [1] RESISTOR AS  
38. 241-7692 [1] HARNESS AS-WIRING (VOLTAGE CONVERTER)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
39. 241-7693 [1] HARNESS AS-POWER (A/C, HEATER CONTROL)  
40. 068-8993 [1] GROMMET  
41. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
42. 1P-6522 [1] GROMMET  
43. 2S-3745 [16] SCREW-TAPPING (10-16X0.5-IN)  
44. 2V-3216 [1] CLIP  
45. 5C-2890 M [7] NUT (M6X1-THD)  
46. 5P-4115 [35] WASHER-HARD (7.2X19X2-MM THK)  
47. 6L-7159 [2] SCREW-MACHINE (8-32X0.313-IN)  
48. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
49. 8T-0285 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
50. 8T-4138 M [22] BOLT (M6X1X20-MM)  
51. 8T-4171 M [6] BOLT (M6X1X12-MM)  
52. 136-1953 E HOSE (10CM)  
53. 5P-7070 BD INSULATION-STRIP  
54. 5P-5908 BD SEAL  
55. 5P-5639 BD SEAL  
56. 5P-5637 BD SEAL  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
 

Information:

Special Instruction
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 5230 :

TIP GP-PENETRATION
109-2687 TIP GP-PENETRATION
253-0057 TIP GP-LONG
TIP GP-GENERAL PURPOSE
6I-8686 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
127-8567 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
120-0101 TIP GP-GENERAL PURPOSE
TIP GP-GENERAL PURPOSE
113-4790 TIP GP-GENERAL PURPOSE
RETAINER-G.E.T.
138-0007 RETAINER-G.E.T.
9U-9919 PROTECTOR GP-SIDE BAR
131-0107 TIP GP-PENETRATION
TIP GP-PENETRATION
143-3099 TIP GP-PENETRATION
TIP GP-SHORT
107-3292 TIP GP-SHORT
TIP-PENETRATION
132-1105 TIP-PENETRATION
AIR CONDITIONER & MOUNTING GP
106-4052 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER & MOUNTING GP
159-4556 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER GP
100-6925 AIR CONDITIONER GP
AIR CONDITIONER GP
100-6925 AIR CONDITIONER GP

Truck sale:

1996 CAT 5230
Call 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
1996 CAT 5230
 
1996 CAT 5230

Cleveland Brothers - Parts
Bellefonte, Pennsylvania 16823
CATERPILLAR 5230 1996
$302,500 USD 
CATERPILLAR 5230 1996
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
1996 CAT 5230
USD $302,500 
1996 CAT 5230

CLEVELAND BROTHERS EQUIP CO - Harrisburg
Pittston, Pennsylvania
CAT 5230
USD $320,000 
CAT 5230

Robbins Equipment Co
Tucson, Arizona 85705
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.