AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-9912 CONTROL GP-GOVERNOR S/N 98Z2350-UP PART OF 106-1756, 108-1743, 112-9039, 116-7958, 116-7959 ENGINE AR 950F II


FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

WHEEL LOADER 950F II WHEEL LOADER 5SK
 950F Series II Wheel Loader 5SK00743-UP (MACHINE) POWERED BY 3116 Engine SEBP2261 950F II 5SK   (1992)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-9912 CONTROL GP-GOVERNOR
 

#SEBP22610170
 

7E-9912: CONTROL GP-GOVERNOR

7E-9912 CONTROL GP-GOVERNOR
S/N 98Z2350-UP
PART OF 106-1756, 108-1743, 112-9039, 116-7958, 116-7959 ENGINE AR
i00167722 SEBP2261
7E9912 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0483 [2] SPRING  
2. 6I-0484 [1] LEVER AS  
3. 4P-4346 [1] LEVER AS  
4. 5C-9553 M [1] BOLT (M6X1X16-MM)  
5. 8T-2228 [1] WASHER-HARD (6.5X17X2-MM THK)  
6. 6V-7646 [1] WASHER-HARD (7.2X25X2-MM THK)  
7. 8C-8451 M [1] BOLT (M6X1X40-MM)  
  M   METRIC PART
 

#SEBP22610171
 

6I-0232: DRIVE GP-GOV & TRANSFER PUMP

6I-0232 DRIVE GP-GOV & TRANSFER PUMP
S/N 98Z2350-12921; 98Z13922-14397
PART OF 6I-0230 GOVERNOR GP
i00167650 SEBP2261
6I0232 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [2] RING-RETAINING  
2. 4P-5675 [1] SPRING-TORSION  
3. 4P-3538 [1] SHAFT-THROTTLE  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7E-3944 [1] SLEEVE  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 7W-5621 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 4P-0665 [1] HOUSING AS-DRIVE  
18. 7S-6798 [1] SEAL-LIP TYPE  
19. 7S-5005 [2] DOWEL  
20. 2K-5830 [2] BEARING AS-NEEDLE  
21. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
22. 7E-3942 [1] BRACKET  
23. 7W-5615 [1] SLEEVE AS-PUMP  
24. 7W-9638 [1] SHAFT AS-SHUTOFF  
25. 7W-4328 [1] SPRING-SHUTOFF  
26. 7W-9402 [1] LEVER-SHUTOFF  
27. 7W-9403 [1] LEVER-SHUTOFF  
28. 8C-5899 [1] PIN-SPRING  
29. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
  M   METRIC PART
 

#SEBP22610172
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 98Z2350-UP
PART OF 100-4499, 100-8271, 130-7326, 133-3062 GOVERNOR GP-UNIT INJECTOR
i00122334 SEBP2261
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
1A. 101-0768 [1] GEAR AS-DRIVE (44-TEETH)  
  8T-0114 [1] PIN-SPRING  
1B. 7S-6798 [1] SEAL-LIP TYPE  
1C. 7S-5005 [2] DOWEL  
1D. 9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP22610173
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 98Z2350-UP
PART OF 107-7828, 4P-5526 GOVERNOR GP-UNIT INJECTOR
i00122408 SEBP2261
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING (FUEL INJECTION PUMP)  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP22610174
 

139-5837: FILTER & LINES GP-FUEL

139-5837 FILTER & LINES GP-FUEL
S/N 98Z18486-UP
PART OF 112-9039, 116-7959, 138-1402 ENGINE AR
i00496360 SEBP2261
1395837 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
2. 5F-7054 [1] SEAL-O-RING  
3. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
4. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
5. 7E-5190 [1] TUBE AS  
6. 7E-5189 [1] VALVE AS (FUEL)  
7. 5P-7813 [1] SEAL-O-RING  
8. 3N-3252 [1] SPRING  
9. 8T-0151 [1] ADAPTER  
10. 3J-1907 [14] SEAL-O-RING  
11. 115-4184 [1] TEE-O-RING PORT  
12. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
13. 7E-5619 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
14. 5P-4961 [4] CLAMP-HOSE  
15. 119-2955 [1] CLIP  
16. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
17. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
18. 6N-4414 [1] COVER-FILTER BASE  
19. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
22. 068-9526 [1] CAP-TUBE  
23. 5C-7261 M [1] NUT (M8X1.25-THD)  
24. 3S-2093 [1] STRAP-CABLE  
25. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
26. 6V-8397 [7] SEAL-O-RING  
27. 115-4233 [1] TUBE AS  
28. 5P-1046 [1] CONNECTOR  
29. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
30. 6V-8774 [1] TEE  
31. 8T-0788 [1] ELBOW  
32. 9S-4191 [2] PLUG (9/16-18-THD)  
33. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
36. 5P-1318 [1] ADAPTER  
37. 129-1105 [1] BRACKET  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
40. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
41. 5P-7970 M [2] NUT (M8X1.25-THD)  
42. 6V-8724 [1] ELBOW  
43. 8X-9255 I [1] HOSE AS  
44. 119-2978 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
45. 7X-2459 [2] ADAPTER-TEE  
46. 3E-7410 [1] TEE  
47. 8C-6867 [2] CONNECTOR  
48. 129-1090 [2] VALVE-DRAIN  
49. 003-7764 [2] END-HOSE  
50. 6V-8636 [1] CONNECTOR  
51. 112-9445 I [1] HOSE AS  
52. 4K-8864 [1] CLIP (LOOP)  
53. 5P-1442 E HOSE (78CM)  
54. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
55. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
56. 1J-9671 [1] SEAL-O-RING  
57. 6I-4802 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER  
58. 7C-1159 [1] GASKET  
59. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
60. 7X-0457 M [2] BOLT (M8X1.25X130-MM)  
61. 103-2529 E [2] HOSE (55CM EACH)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22610175
 

108-5769: FILTER GP-FUEL

108-5769 FILTER GP-FUEL -PRIMARY
S/N 98Z3380-14613
PART OF 106-1756, 108-1743, 112-9039, 116-7958, 116-7959 ENGINE AR
i00168275 SEBP2261
1085769 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 6I-4802 [1] BASE AS  
  6I-4801 [1] INSERT-FILTER  
4. 7C-1159 [1] GASKET  
5. 7X-0457 M [1] BOLT (M8X1.25X130-MM)  
6. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 3J-1907 [1] SEAL-O-RING  
9. 7E-5619 [1] BRACKET AS  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 8C-4984 M [1] BOLT (M8X1.25X150-MM)  
  M   METRIC PART
 

#SEBP22610176
 

129-3587: FILTER GP-FUEL

129-3587 FILTER GP-FUEL -PRIMARY
S/N 98Z14614-18485
PART OF 112-9039, 116-7959, 138-1402 ENGINE AR
i00168409 SEBP2261
1293587 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 6I-4802 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER  
4. 7C-1159 [1] GASKET  
5. 7X-0457 M [2] BOLT (M8X1.25X130-MM)  
6. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 3J-1907 [1] SEAL-O-RING  
9. 7E-5619 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP22610177
 

7E-5735: FILTER GP-FUEL

7E-5735 FILTER GP-FUEL
S/N 98Z2350-3379
PART OF 106-1756 ENGINE AR
i00167715 SEBP2261
7E5735 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 4W-5158 [1] BASE AS  
  4N-3294 [1] INSERT-FUEL FILTER  
4. 7C-1159 [1] GASKET  
5. 7X-0457 M [1] BOLT (M8X1.25X130-MM)  
6. 1P-2299 [1] FILTER AS-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 3J-1907 [1] SEAL-O-RING  
9. 8C-4984 M [1] BOLT (M8X1.25X150-MM)  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 7E-5619 [1] BRACKET AS  
  M   METRIC PART
 

#SEBP22610178
 

6I-0230: GOVERNOR GP

6I-0230 GOVERNOR GP
S/N 98Z2350-12921; 98Z13922-14397
PART OF 7E-8640 GOVERNOR GP-UNIT INJECTOR
i00167649 SEBP2261
6I0230 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 7C-8974 [1] CLEVIS AS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-FULCRUM  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. [1] HOUSING AS-REAR  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [3] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 9X-6002 M [1] SETSCREW  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 7C-6250 [1] COVER AS  
54. Z [1] PLUG  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 6I-0232 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-7842 [1] RISER  
72. 4P-7843 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP22610179
 

100-4499: GOVERNOR GP-UNIT INJECTOR

100-4499 GOVERNOR GP-UNIT INJECTOR
S/N 98Z2350-25764
PART OF 4P-5729 GOVERNOR GP-UNIT INJECTOR
i00168095 SEBP2261
1004499 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7587 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-SHAFT  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 100-6810 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4P-8694 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

Information:

Caterpillar Parts SIS Catalog 950F II :

CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
TURBOCHARGER GP
129-1333 TURBOCHARGER GP
TURBOCHARGER GP
129-1121 TURBOCHARGER GP
TURBOCHARGER GP
126-5926 TURBOCHARGER GP
TURBOCHARGER GP
125-1126 TURBOCHARGER GP
TURBOCHARGER GP
107-7683 TURBOCHARGER GP
TURBOCHARGER GP
105-5059 TURBOCHARGER GP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FILTER & LINES GP-FUEL
139-5837 FILTER & LINES GP-FUEL
FILTER GP-FUEL
108-5769 FILTER GP-FUEL
FILTER GP-FUEL
129-3587 FILTER GP-FUEL
FILTER GP-FUEL
7E-5735 FILTER GP-FUEL
GOVERNOR GP
6I-0230 GOVERNOR GP

Truck sale:

Caterpillar 950F II
 
Caterpillar 950F II
- Wheel loaders
FINNING CANADA
 
46.000 
Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT
 
34,500 
Caterpillar 950FII, Construction
- Wheel Loaders

 
48,000 
Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950FII, Construction
31,500 
Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.