HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
KICKOUT & POSITIONER GP
LINES GP-FRONT
LINES GP-HYDRAULIC
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP22610500
1U-1148: CYLINDER GP-LIFT
1U-1148 CYLINDER GP-LIFT -RH
S/N 5SK743-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5517 CYLINDER & SEAL GP-LIFT
S/N 5SK743-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5517 CYLINDER & SEAL GP-LIFT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8792 | [1] | CYLINDER AS | |
| 2. | 4V-8674 | [1] | BUSHING | |
| 3. | 3J-9545 | [1] | LOCKNUT (2-12-THD) | |
| 4. | 8C-9173 | [1] | SEAL AS | |
| 5. | 1J-0708 | [1] | RING-WEAR | |
| 6. | 8J-1818 | [1] | PISTON | |
| 7. | 5H-3252 | [1] | SEAL-O-RING | |
| 8. | 2K-3258 | [1] | RING-BACKUP | |
| 9. | 124-2806 C | [1] | HEAD | |
| 10. | 9T-0988 | [1] | ROD AS | |
| 11. | 5P-8249 | [4] | WASHER-HARD (24X41.5X4-MM THK) | |
| 12. | 1D-4626 | [4] | BOLT (7/8-9X2.75-IN) | |
| 13. | 8T-7584 C | [1] | RING-WEAR | |
| 14. | 8C-9126 C | [1] | SEAL AS | |
| 15. | 5J-8300 | [1] | SEAL-U-CUP | |
| 16. | 8C-5218 C | [1] | SEAL-LIP TYPE | |
| 17. | 7M-2275 | [1] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7X-2698 | KIT-SEAL (INCLUDES RINGS) | |||
| 8C-5808 | KIT-SEAL (INCLUDES RINGS) | |||
| 8C-5809 | KIT-SEAL (INCLUDES RINGS) | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22610501
3G-8786: CYLINDER GP-TILT
3G-8786 CYLINDER GP-TILT
S/N 5SK743-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
S/N 5SK743-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8785 | [1] | CYLINDER AS | |
| 7D-4726 | [1] | BLOCK | ||
| 2. | 3G-9191 | [1] | BUSHING | |
| 3. | 5J-3488 | [1] | LOCKNUT (2-1/4-12-THD) | |
| 4. | 6E-2192 | [1] | PISTON | |
| 5. | 124-2726 | [1] | HEAD | |
| 6. | 1A-5576 | [2] | BOLT (7/8-9X4.5-IN) | |
| 7. | 5P-8249 | [8] | WASHER-HARD (24X41.5X4-MM THK) | |
| 8. | 6E-2191 | [1] | ROD AS | |
| 9. | 3G-8779 | [1] | BUSHING | |
| 10. | 8T-8389 | [1] | SEAL-WIPER | |
| 11. | 5J-8325 | [1] | SEAL-U-CUP | |
| 12. | 1D-4628 | [6] | BOLT (7/8-9X3.25-IN) | |
| 13. | 8C-9121 | [1] | SEAL AS | |
| 14. | 9F-1399 | [1] | SEAL-O-RING | |
| 4J-9218 | [1] | RING-BACKUP | ||
| 15. | 5J-4997 | [1] | SEAL AS | |
| 16. | 3G-5098 | [1] | RING-WEAR | |
| 17. | 8T-6745 | [1] | RING-WEAR | |
| 18. | 9T-2584 | [1] | RING-RETAINING (INTERNAL) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP22610502
9U-1821: HYDRAULIC AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7V-5516 Y | [1] | CYLINDER & SEAL GP-LIFT | ||
| 7V-5517 Y | [1] | CYLINDER & SEAL GP-LIFT | ||
| 3V-0136 Y | [1] | CYLINDER & SEAL GP-TILT | ||
| 9C-9750 Y | [1] | KICKOUT & POSITIONER GP | ||
| 7V-8359 Y | [1] | LINES GP-HYDRAULIC | ||
| 9C-8382 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 106-0431 Y | [1] | LINES GP-PILOT | ||
| 8R-3546 Y | [1] | LINES GP-TILT CYLINDER | ||
| 3V-0132 Y | [1] | MOUNTING GP-HYDRAULIC TANK | ||
| 106-0432 Y | [1] | PUMP & MTG GP-HYDRAULIC | ||
| 6E-6109 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| 4E-3169 Y | [1] | VALVE & MTG GP-MAIN CONTROL (2-FUNCTION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22610503
9U-1832: HYDRAULIC AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
#SEBP22610504
9U-4773: HYDRAULIC AR
9U-4773 HYDRAULIC AR
S/N 5SK743-UP
S/N 5SK743-UP
For full view, you need register
Parts for your 950F II WHEEL LOADER:
#SEBP22610505
9C-9750: KICKOUT & POSITIONER GP
9C-9750 KICKOUT & POSITIONER GP
S/N 5SK743-99999
PART OF 9U-1821 HYDRAULIC AR
S/N 5SK743-99999
PART OF 9U-1821 HYDRAULIC AR
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 2. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 5V-1410 | [1] | HOLDER (SWITCH) | |
| 4. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 5. | 7X-0579 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 6. | 8V-8814 | [1] | BRACKET | |
| 7. | 9X-9509 | [1] | CONTROL GP-LIFT KICKOUT | |
| 8. | 5V-2787 | [1] | MAGNET AS | |
| 9. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 10. | 3K-7092 | [2] | NUT AS-SPRING | |
| 11. | 7X-0388 | [2] | BOLT (7/8-9X4.5-IN) | |
| 12. | 7X-0545 | [2] | WASHER-HARD (24X40X5-MM THK) | |
| 13. | 4E-5210 | [1] | TUBE AS | |
| 14. | 4E-5209 | [1] | BRACKET | |
| 15. | 6V-9025 | [1] | SETSCREW | |
| 16. | 5S-7383 | [2] | BOLT (3/8-16X1.75-IN) | |
| 17. | 8T-3601 | [4] | SETSCREW-SOCKET (1/4-20-THD) | |
| 18. | 4V-4840 | [1] | MAGNET AS | |
| 19. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 20. | 8C-3121 | [2] | BOLT (5/16-18X1.5-IN) | |
| 21. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 3E-5493 | [1] | CONTROL GP-BUCKET POSITIONER | |
| 23. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 24. | 4E-5213 | [1] | COVER AS | |
| 25. | 1F-0748 | [2] | NUT-WELD (1/2-13-THD) |
#SEBP22610506
112-7920: LINES GP-FRONT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-9088 | [1] | BRACKET | |
| 2. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 3. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 9C-9087 | [1] | BRACKET | |
| 5. | 8T-9382 | [28] | BOLT (7/16-14X1.25-IN) | |
| 6. | 8T-5360 | [34] | WASHER (12X22.5X2.5-MM THK) | |
| 7. | 2V-5043 I | [2] | HOSE AS | |
| 8. | 6V-0852 | [1] | CAP-DUST | |
| 9. | 1P-4578 | [12] | FLANGE-HALF | |
| 10. | 4J-0522 | [6] | SEAL-O-RING | |
| 11. | 4E-0220 | [1] | PLATE | |
| 12. | 3J-1907 | [1] | SEAL-O-RING | |
| 13. | 5V-7052 | [1] | TUBE AS | |
| 14. | 8T-9380 | [6] | BOLT (7/16-14X1-IN) | |
| 15. | 5V-7051 | [1] | TUBE AS | |
| 16. | 5H-4020 | [2] | COVER | |
| 17. | 9C-9201 | [1] | TUBE AS | |
| 18. | 8J-5914 | [1] | PLUG | |
| 19. | 2S-4078 | [1] | SEAL-O-RING | |
| 20. | 9C-9202 | [1] | TUBE AS | |
| 21. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 22. | 8C-6877 | [8] | BOLT (7/16-14X1.75-IN) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 7V-6556 | [1] | ELBOW | |
| 25. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 26. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP22610507
112-7920: LINES GP-FRONT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-9088 | [1] | BRACKET | |
| 2. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 3. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 9C-9087 | [1] | BRACKET | |
| 5. | 8T-9382 | [28] | BOLT (7/16-14X1.25-IN) | |
| 6. | 8T-5360 | [34] | WASHER (12X22.5X2.5-MM THK) | |
| 7. | 2V-5043 I | [2] | HOSE AS | |
| 8. | 6V-0852 | [1] | CAP-DUST | |
| 9. | 1P-4578 | [12] | FLANGE-HALF | |
| 10. | 4J-0522 | [6] | SEAL-O-RING | |
| 11. | 123-9767 | [1] | PLATE | |
| 12. | 3J-1907 | [1] | SEAL-O-RING | |
| 13. | 5V-7052 | [1] | TUBE AS | |
| 14. | 8T-9380 | [6] | BOLT (7/16-14X1-IN) | |
| 15. | 5V-7051 | [1] | TUBE AS | |
| 16. | 5H-4020 | [2] | COVER | |
| 17. | 115-1040 C | [1] | TUBE AS | |
| 18. | 8J-5914 | [1] | PLUG | |
| 19. | 2S-4078 | [1] | SEAL-O-RING | |
| 20. | 115-1039 C | [1] | TUBE AS | |
| 21. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 22. | 8C-6877 | [8] | BOLT (7/16-14X1.75-IN) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 7V-6556 | [1] | ELBOW | |
| 25. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 26. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP22610508
8R-3547: LINES GP-FRONT
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-9088 | [1] | BRACKET | |
| 2. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) | |
| 3. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 9C-9087 | [1] | BRACKET | |
| 5. | 8T-9382 | [28] | BOLT (7/16-14X1.25-IN) | |
| 6. | 8T-5360 | [34] | WASHER (12X22.5X2.5-MM THK) | |
| 7. | 2V-5043 I | [2] | HOSE AS | |
| 8. | 5V-7048 | [2] | BLOCK | |
| 9. | 1P-4578 | [12] | FLANGE-HALF | |
| 10. | 4J-0522 | [6] | SEAL-O-RING | |
| 11. | 4E-0220 | [1] | PLATE | |
| 12. | 5V-7047 | [4] | BLOCK | |
| 13. | 5V-7052 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 14. | 8T-9380 | [6] | BOLT (7/16-14X1-IN) | |
| 15. | 5V-7051 | [1] | TUBE AS | |
| 6K-1694 | [3] | CLIP | ||
| 16. | 5H-4020 | [2] | COVER | |
| 17. | 9C-9201 | [1] | TUBE AS | |
| 18. | 8J-5914 | [1] | PLUG | |
| 19. | 2S-4078 | [1] | SEAL-O-RING | |
| 20. | 9C-9202 | [1] | TUBE AS | |
| 21. | 5V-7050 | [2] | PLATE | |
| 22. | 8C-6877 | [8] | BOLT (7/16-14X1.75-IN) | |
| 23. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 24. | 7V-6556 | [1] | ELBOW | |
| 25. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 26. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 29. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 30. | 3J-1907 | [1] | SEAL-O-RING | |
| 31. | 6V-0852 | [1] | CAP-DUST | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP22610509
7V-8359: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 950F II WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1777 I | [1] | HOSE AS | |
| 2. | 7X-0584 | [4] | WASHER-HARD (13.5X20.5X2-MM THK) | |
| 3. | 5P-2566 | [8] | BOLT (1/2-13X1.5-IN) | |
| 4. | 8T-8916 | [18] | BOLT (7/16-14X1.5-IN) | |
| 8T-5360 | [18] | WASHER (12X22.5X2.5-MM THK) | ||
| 5. | 1P-4578 | [8] | FLANGE-HALF | |
| 4J-0522 | [4] | SEAL-O-RING | ||
| 6. | 5P-7470 | [1] | CLIP (SLOT) | |
| 5P-7471 | [1] | CLIP (TAB) | ||
| 7. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 8. | 7X-3327 | [1] | BOLT-LOCKING (1/2-13X1.25-IN) | |
| 9. | 8T-4223 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 7V-6428 | [1] | KEEPER | |
| 11. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 12. | 1P-4579 | [4] | FLANGE-HALF | |
| 4J-0524 | [2] | SEAL-O-RING | ||
| 13. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-0852 | [1] | CAP-DUST | ||
| 14. | 8J-5914 | [1] | PLUG | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 15. | 5P-0598 | [2] | CLAMP-HOSE | |
| 16. | 8T-8920 | [2] | BOLT (1/2-13X3.25-IN) | |
| 17. | 5V-8898 | [1] | ELBOW | |
| 18. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 19. | 5P-2424 | [2] | BOLT (1/2-13X2.25-IN) | |
| 20. | 4V-1776 I | [1] | HOSE AS | |
| 21. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 22. | 7X-0346 | [4] | BOLT (5/8-11X2-IN) | |
| 23. | 3V-0928 | [1] | PLATE | |
| 24. | 4V-1775 I | [1] | HOSE AS | |
| 25. | 4V-1752 | [1] | TUBE AS | |
| 26. | 3V-0937 | [1] | ELBOW | |
| 27. | 7X-0326 | [2] | BOLT (1/2-13X3-IN) | |
| 28. | 1P-4585 | [2] | FLANGE-HALF | |
| 2H-6338 | [1] | SEAL-O-RING | ||
| 29. | 7X-0347 | [4] | BOLT (5/8-11X2.25-IN) | |
| 30. | 8T-4122 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 3V-0932 | [1] | TUBE AS | |
| 32. | 7X-7893 BE | [1] | HOSE | |
| 33. | 3D-2824 C | [1] | SEAL-O-RING | |
| 34. | 116-2810 C | [1] | VALVE (BREAKER RELIEF VALVE) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
