AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3176B Marine Engine 9WK00001-UP BASIC ENGINE Caterpillar SIS



MARINE ENGINE 3176B MARINE ENGINE 9WK
 3176B Marine Engine 9WK00001-UP SEBP2264 3176B 9WK   (1992)

Parts group 3176B:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
104-3427 CAMSHAFT GP
104-3427 CAMSHAFT GP
CRANKSHAFT GP
CRANKSHAFT GP
122-0732 CRANKSHAFT GP
122-0732 CRANKSHAFT GP
S/N 9WK1-309
CRANKSHAFT GP
9Y-4054 CRANKSHAFT GP
9Y-4054 CRANKSHAFT GP
S/N 9WK309-UP
196-9520 KIT-CRANKSHAFT BEARING
196-9520 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
230-7054 KIT-ENGINE REPAIR
230-7054 KIT-ENGINE REPAIR -MARINE CLASSIFICATION SOCIETY
S/N 9WK52-837
PROVIDES ROD BEARINGS AND BLOCK INTERFACE GASKETS AND SEALS
FIELD INSTALLATION
SEAL GP-CRANKSHAFT
7C-8572 SEAL GP-CRANKSHAFT
7C-8572 SEAL GP-CRANKSHAFT
CYLINDER BLOCK GP
CYLINDER BLOCK GP
6I-2753 CYLINDER BLOCK GP
6I-2753 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
7E-4844 PLUG GP-CYLINDER BLOCK
7E-4844 PLUG GP-CYLINDER BLOCK
138-2029 PLUG GP-ENGINE
138-2029 PLUG GP-ENGINE
S/N 9WK822-UP
SPACER GP-BLOCK
113-8997 SPACER GP-BLOCK
113-8997 SPACER GP-BLOCK
PART OF 6I-2753 CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER HEAD AS
104-3847 CYLINDER HEAD AS
104-3847 CYLINDER HEAD AS
S/N 9WK1-572; 9WK637-UP
PART OF 104-3880, 124-2682, 132-3244 CYLINDER HEAD AS, 109-5337 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@104-3880@@@@@, @@@@@132-3244@@@@@, @@@@@124-2682@@@@@
CYLINDER HEAD AS
104-3880 CYLINDER HEAD AS
104-3880 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@104-3847@@@@@
CYLINDER HEAD AS
124-2682 CYLINDER HEAD AS
124-2682 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@104-3847@@@@@
CYLINDER HEAD AS
132-3225 CYLINDER HEAD AS
132-3225 CYLINDER HEAD AS
S/N 9WK573-636
PART OF 109-5337 CYLINDER HEAD GP
CYLINDER HEAD AS
132-3244 CYLINDER HEAD AS
132-3244 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@104-3847@@@@@
CYLINDER HEAD AS
144-2945 CYLINDER HEAD AS
144-2945 CYLINDER HEAD AS
S/N 9WK837-UP
PART OF 144-2964 CYLINDER HEAD AS, 144-2962 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 144-2964 CYLINDER HEAD AS, 144-2965 CYLINDER HEAD AS
CYLINDER HEAD AS
144-2964 CYLINDER HEAD AS
144-2964 CYLINDER HEAD AS
S/N 9WK837-UP
FIELD REPLACEMENT FOR 144-2945 CYLINDER HEAD AS
FIELD INSTALLATION
CYLINDER HEAD GP
109-5336 CYLINDER HEAD GP
109-5336 CYLINDER HEAD GP
S/N 9WK1-836
CYLINDER HEAD GP
109-5336 CYLINDER HEAD GP
109-5336 CYLINDER HEAD GP
S/N 9WK837-UP
CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
S/N 9WK1-572
PART OF 109-5336 CYLINDER HEAD GP
CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
S/N 9WK573-636
PART OF 109-5336 CYLINDER HEAD GP
CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
109-5337 CYLINDER HEAD GP
S/N 9WK637-836
PART OF 109-5336 CYLINDER HEAD GP
CYLINDER HEAD GP
144-2962 CYLINDER HEAD GP
144-2962 CYLINDER HEAD GP
S/N 9WK837-UP
PART OF 109-5336 CYLINDER HEAD GP
138-2029 PLUG GP-ENGINE
138-2029 PLUG GP-ENGINE
S/N 9WK822-UP
DAMPER GP
DAMPER GP
100-6955 DAMPER GP
100-6955 DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
9Y-3660 DRIVE GP-ACCESSORY
9Y-3660 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
9Y-3661 DRIVE GP-ACCESSORY
9Y-3661 DRIVE GP-ACCESSORY
SAE TYPE A HYDRAULIC PUMP WITH 11 TOOTH 16/32 PITCH SPLINE DRIVE
DRIVE GP-PUMP
COVER GP-HYDRAULIC PUMP DRIVE
7C-1740 COVER GP-HYDRAULIC PUMP DRIVE
7C-1740 COVER GP-HYDRAULIC PUMP DRIVE
FASTENER GP-ENGINE
132-3150 PARTS GP-CHROME
132-3150 PARTS GP-CHROME
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
103-0713 FLYWHEEL GP
103-0713 FLYWHEEL GP
S/N 9WK1-780
FOR USE WITH NO. 1 FLYWHEEL HOUSING
FLYWHEEL GP
132-3151 FLYWHEEL GP
132-3151 FLYWHEEL GP
S/N 9WK780-UP
GEAR GP
GEAR GP-FRONT
102-5839 GEAR GP-FRONT
102-5839 GEAR GP-FRONT
GEAR GP-FRONT
122-0745 GEAR GP-FRONT
122-0745 GEAR GP-FRONT
S/N 9WK1-309
HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
S/N 9WK1-385
HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
S/N 9WK386-UP
GUARD GP-BELT
GUARD GP-BELT
100-8518 GUARD GP-BELT
100-8518 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
110-0378 GUARD GP-BELT
110-0378 GUARD GP-BELT
FOR USE WITH STACK-ON CRANK PULLEYS
AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
7C-1749 HOUSING GP-FLYWHEEL
7C-1749 HOUSING GP-FLYWHEEL
S/N 9WK1-572
HOUSING GP-FLYWHEEL
9Y-7284 HOUSING GP-FLYWHEEL
9Y-7284 HOUSING GP-FLYWHEEL
S/N 9WK571-UP
HOUSING GP-FRONT
GEAR GP-FRONT
102-5839 GEAR GP-FRONT
102-5839 GEAR GP-FRONT
GEAR GP-FRONT
122-0745 GEAR GP-FRONT
122-0745 GEAR GP-FRONT
S/N 9WK1-309
HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
S/N 9WK1-385
HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
100-6452 HOUSING GP-FRONT
S/N 9WK386-UP
LIFTING GP-ENGINE
LIFTING GP-ENGINE
100-6956 LIFTING GP-ENGINE
100-6956 LIFTING GP-ENGINE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
101-1650 MOUNTING GP-ALTERNATOR
101-1650 MOUNTING GP-ALTERNATOR
FOR USE WITH 24 VOLT, 65 AMPERE & 12 VOLT, 90 AMPERE ALTERNATORS
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
104-8008 MOUNTING GP-ALTERNATOR
104-8008 MOUNTING GP-ALTERNATOR
FOR USE WITH 12 VOLT, 51 AMPERE & 24 VOLT, 35 AMPERE ALTERNATORS
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
109-5883 MOUNTING GP-ENGINE
109-5883 MOUNTING GP-ENGINE
ISOLATOR
AN ATTACHMENT
SUPPORT GP-ENGINE
121-2791 SUPPORT GP-ENGINE
121-2791 SUPPORT GP-ENGINE
PROVIDES OPTIONAL MOUNTING POSITIONS
ALSO AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
102-5832 PAN GP-OIL
102-5832 PAN GP-OIL
FRONT SUMP
AN ATTACHMENT
PAN GP-OIL
119-3731 PAN GP-OIL
119-3731 PAN GP-OIL
S/N 9WK1-572
ALSO AN ATTACHMENT
PAN GP-OIL
126-0165 PAN GP-OIL
126-0165 PAN GP-OIL
S/N 9WK571-UP
PAN GP-OIL
136-4350 PAN GP-OIL
136-4350 PAN GP-OIL
FOR USE WITH FRONT DIPSTICK
AN ATTACHMENT
PARTS GP-MISCELLANEOUS
132-3136 FASTENER GP-ENGINE
132-3136 FASTENER GP-ENGINE
PART OF 132-3150 PARTS GP-CHROME
AN ATTACHMENT
132-3150 PARTS GP-CHROME
132-3150 PARTS GP-CHROME
AN ATTACHMENT
124-8113 KIT-CRUISE
124-8113 KIT-CRUISE
FIELD INSTALLATION
124-8114 KIT-CRUISE
124-8114 KIT-CRUISE
FIELD INSTALLATION
124-8115 KIT-CRUISE
124-8115 KIT-CRUISE
FIELD INSTALLATION
PISTON & ROD GP
230-7054 KIT-ENGINE REPAIR
230-7054 KIT-ENGINE REPAIR -MARINE CLASSIFICATION SOCIETY
S/N 9WK52-837
PROVIDES ROD BEARINGS AND BLOCK INTERFACE GASKETS AND SEALS
FIELD INSTALLATION
PISTON & ROD GP
6I-2717 PISTON & ROD GP
6I-2717 PISTON & ROD GP
16:1 RATIO
133-7082 RING GP-PISTON
133-7082 RING GP-PISTON
FOR USE WITH 10L ENGINES
FIELD INSTALLATION
PULLEY GP
PULLEY GP-CRANKSHAFT
100-8529 PULLEY GP-CRANKSHAFT
100-8529 PULLEY GP-CRANKSHAFT
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
118-3868 PULLEY GP-CRANKSHAFT
118-3868 PULLEY GP-CRANKSHAFT
FRONT CRANKSHAFT
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
118-7570 SHAFT GP-STUB
118-7570 SHAFT GP-STUB
FOR USE WITH DAMPER
AN ATTACHMENT
SHAFT GP-STUB
118-7571 SHAFT GP-STUB
118-7571 SHAFT GP-STUB
FOR USE WITH CRANKSHAFT PULLEY WITH DOUBLE ACCESSORY DRIVE PULLEY
AN ATTACHMENT
SHAFT GP-STUB
133-3090 SHAFT GP-STUB
133-3090 SHAFT GP-STUB
FOR USE WITH @@@@@118-3868@@@@@
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
100-8518 GUARD GP-BELT
100-8518 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
110-0378 GUARD GP-BELT
110-0378 GUARD GP-BELT
FOR USE WITH STACK-ON CRANK PULLEYS
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
6I-2756 COVER GP-VALVE MECHANISM
6I-2756 COVER GP-VALVE MECHANISM
LIFTER GP-VALVE
6I-1605 LIFTER GP-VALVE
6I-1605 LIFTER GP-VALVE
PART OF 6I-1604 VALVE MECHANISM GP
ROCKER ARM GP
6I-1616 ROCKER ARM GP
6I-1616 ROCKER ARM GP
PART OF 6I-1604 VALVE MECHANISM GP
VALVE MECHANISM GP
6I-1604 VALVE MECHANISM GP
6I-1604 VALVE MECHANISM GP
COVER GP-ENGINE
132-3150 PARTS GP-CHROME
132-3150 PARTS GP-CHROME
AN ATTACHMENT

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Belt Tension Chart
3176B MARINE ENGINE
Truck Engine News
A New Valve Bridge Assembly Is Available For Engines Equipped With A Compression Brake {1119, 1121}
2000/11/01
Engine News
New 8T2998 Lubricant Available
1986/03/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Service Letter-NACD
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Camshaft Group
3176B MARINE ENGINE
Service Letter-China
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Remove All 1011287 And 1030731 Cam Gaskets From Parts Stock
Disassembly and Assembly
Camshaft Assembly
3176B MARINE ENGINE
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Engine News
Trolling Valve Reduces Initial Load Of Clutch Engagement {3302}
1996/08/19
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/07/01
Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/09/01
Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Technical Information Bulletin
Aftercooler core failures in marine applacations
Aftercooler core failures in marine applacations
Specifications
Crankshaft
3176B MARINE ENGINE
Crankshaft Seals
3176B MARINE ENGINE
Connecting Rod And Main Bearing Journals
3176B MARINE ENGINE
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Rear Seal Assembly
3176B MARINE ENGINE
Crankshaft Front Seal Assembly
3176B MARINE ENGINE
Crankshaft Main Bearings
3176B MARINE ENGINE
Crankshaft
3176B MARINE ENGINE
Measuring Main Bearing Clearances
3176B MARINE ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Cylinder Pack Puller Groups Improved
1993/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block Group
3176B MARINE ENGINE
Spacer Block
3176B MARINE ENGINE
Cylinder Liners
3176B MARINE ENGINE
Connecting Rod And Main Bearing Journals
3176B MARINE ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Pack
3176B MARINE ENGINE
Piston Cooling Jets
3176B MARINE ENGINE
Spacer Block
3176B MARINE ENGINE
Crankshaft Main Bearings
3176B MARINE ENGINE
Measuring Main Bearing Clearances
3176B MARINE ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Inlet Valves for Cylinder Head Groups in Industrial Engines {1105}
2001/08/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3176B Marine Engine
Engine Valve Rotators - Inspect
3176B Marine Engine
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100}
Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Australia
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-CFEL
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-CSARL
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Americas
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Brazil
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Technical Information Bulletin
New Exhaust Valve Lash Setting Dimensions
New Exhaust Valve Lash Setting Dimensions
Specifications
Valves
3176B MARINE ENGINE
Cylinder Head
3176B MARINE ENGINE
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Asia
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Disassembly and Assembly
Water Outlet Manifold
3176B MARINE ENGINE
Cylinder Head Assembly
3176B MARINE ENGINE
Valves
3176B MARINE ENGINE
Valve Springs
3176B MARINE ENGINE
Valve Guides
3176B MARINE ENGINE
Valve Seat Inserts
3176B MARINE ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3176B Marine Engine
Service Letter-NACD
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Damper Group
3176B MARINE ENGINE
Service Letter-China
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Disassembly and Assembly
Vibration Damper &amp; Pulley
3176B MARINE ENGINE
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Disassembly and Assembly
Accessory Drive
3176B MARINE ENGINE
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/09/01
Specifications
Flywheel Runout
3176B MARINE ENGINE
Flywheel Housing Runout
3176B MARINE ENGINE
Flywheel Housing Bore
3176B MARINE ENGINE
Flywheel Group
3176B MARINE ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
3176B MARINE ENGINE
Flywheel Housing
3176B MARINE ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
New Camshaft Gasket Used In Front Housing Groups {1150,1162,1166}
1998/07/01
Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/09/01
Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01
Specifications
Front Housing Group
3176B MARINE ENGINE
Front Gear Group
3176B MARINE ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Crankshaft Front Seal Assembly
3176B MARINE ENGINE
Front Housing Cover
3176B MARINE ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Specifications
Flywheel Housing Runout
3176B MARINE ENGINE
Flywheel Housing Bore
3176B MARINE ENGINE
Disassembly and Assembly
Flywheel Housing
3176B MARINE ENGINE
Crankshaft Rear Seal Assembly
3176B MARINE ENGINE
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
New Camshaft Gasket Used In Front Housing Groups {1150,1162,1166}
1998/07/01
Technical Information Bulletin
NEW O-RING SEAL USED BETWEEN THE FRONT CRANKSHAFT SEAL AND THE FRONT HOUSING
NEW O-RING SEAL USED BETWEEN THE FRONT CRANKSHAFT SEAL AND THE FRONT HOUSING
Specifications
Front Housing Group
3176B MARINE ENGINE
Front Gear Group
3176B MARINE ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Crankshaft Front Seal Assembly
3176B MARINE ENGINE
Front Housing Cover
3176B MARINE ENGINE
Operation and Maintenance Manual
Engine Lifting
3176B Marine Engine
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Operation and Maintenance Manual
Overhaul Considerations
3176B Marine Engine
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Technical Information Bulletin
Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
Improper Orientation of the 8S-5383 Block Used in the Alternator Mounting Group of Certain Marine Engines{1154, 1405, 1405}
Engine News
An Improved Engine Mount is Now Used {1152}
2004/12/01
Operation and Maintenance Manual
Engine Mounts - Inspect
3176B Marine Engine
Disassembly and Assembly
Engine Front Support
3176B MARINE ENGINE
Engine News
Oil Pan Gasket Is Reusable {1302}
1996/09/23
New Spacer For Marine Oil Pan Gaskets {1302}
2002/11/01
A New Seal and Oil Pan Provides Improved Sealing {1302, 1302}
2003/11/01
Specifications
Oil Pan Group
3176B MARINE ENGINE
Disassembly and Assembly
Oil Pan
3176B MARINE ENGINE
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod And Main Bearing Journals
3176B MARINE ENGINE
Connecting Rods
3176B MARINE ENGINE
Pistons And Rings
3176B MARINE ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Cylinder Pack
3176B MARINE ENGINE
Piston &amp; Connecting Rod Assemblies
3176B MARINE ENGINE
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3176B Marine Engine
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Damper Group
3176B MARINE ENGINE
Service Letter-China
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Letter-APD
Remove All 1105146 Damper Assemblies From Parts Stock
Remove All 1105146 Damper Assemblies From Parts Stock
Disassembly and Assembly
Vibration Damper &amp; Pulley
3176B MARINE ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Dynamometer Testing of Electronic Engines{1000}
1995/10/01
Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 7X1700 Communication Adapter Group{0781, 0782}
Using the 7X1700 Communication Adapter Group{0781, 0782}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use 129-2018 Power Cable Assembly To Gain Access To ECM Data{1900,0781}
1998/03/09
Use 140-2266 Harness Assembly (70-Pin Breakout &quot;T&quot;) For Testing And Adjusting{1900,0781}
1998/03/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Alternator Belt - Inspect/Adjust/Replace
3176B Marine Engine
Disassembly and Assembly
V-Belt
3176B MARINE ENGINE
Truck Engine News
A New Valve Bridge Assembly Is Available For Engines Equipped With A Compression Brake {1119, 1121}
2000/11/01
A New Valve Bridge Assembly Is Available {1121}
2001/03/01
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Valve Cover Base Gasket Is Reusable {1120}
1996/09/23
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Tightening Procedure for the Base of the Valve Mechanism Cover {1107}
2002/08/01
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3176B Marine Engine
Engine Valve Rotators - Inspect
3176B Marine Engine
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Australia
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-CFEL
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-CSARL
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Americas
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Technical Information Bulletin
New Exhaust Valve Lash Setting Dimensions
New Exhaust Valve Lash Setting Dimensions
Camshaft Injector Lifter (Roller Follower) Assembly Replacement
Camshaft Injector Lifter (Roller Follower) Assembly Replacement
Specifications
Lifter Group
3176B MARINE ENGINE
Unit Injector Rocker Arm Assembly
3176B MARINE ENGINE
Rocker Arm Shaft Assembly
3176B MARINE ENGINE
Valve Mechanism Group
3176B MARINE ENGINE
Valve Rocker Arm Group
3176B MARINE ENGINE
Valve Mechanism Cover Group
3176B MARINE ENGINE
Service Letter-China
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Service Letter-Asia
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Product Support Program For Replacing Intake And Exhaust Valve Bridges On Certain C-10, C-12, 3176, 3176B, 3176C And 3196 Engines And Challenger 75D And 85D Agricultural Tractors
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Remove All 1159407, 1159410, 1382554 And 1382555 Bridge Assemblies From Parts Stock
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Product Support Program For Replacing The Intake And Exhaust Valves In Certain 3176B, 3176C And 3196 Marine Engines
Disassembly and Assembly
Valve Cover Assemblies
3176B MARINE ENGINE
Valve Cover Base
3176B MARINE ENGINE
Rocker Arm Assemblies &amp; Push Rods
3176B MARINE ENGINE
Cam Roller Followers
3176B MARINE ENGINE
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Disassembly and Assembly
Flywheel Housing
3176B MARINE ENGINE
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.