104-8015 LINES GP-FLEXIBLE FUEL FOR USE WITH ENGINE PIPE THREAD CONNECTOR AN ATTACHMENT 3176B MARINE ENGINE



FUEL SYSTEM
LINES GP-FUEL
LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER

MARINE ENGINE 3176B MARINE ENGINE 9WK
 3176B Marine Engine 9WK00001-UP SEBP2264 3176B 9WK   (1992)

FUEL SYSTEM

LINES GP-FUEL
COOLER GP-FUEL
135-2802 COOLER GP-FUEL
110-0497 KIT-FUEL LINES
110-0498 KIT-FUEL LINES
LINES GP-FLEXIBLE FUEL
104-8015 LINES GP-FLEXIBLE FUEL
 

#SEBP22640150
 

104-8015: LINES GP-FLEXIBLE FUEL

104-8015 LINES GP-FLEXIBLE FUEL
FOR USE WITH ENGINE PIPE THREAD CONNECTOR
AN ATTACHMENT
i00476638 SEBP2264
1048015 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2R-6806 [1] CONNECTOR  
2. 3J-1907 [1] SEAL-O-RING  
3. 6K-9194 [1] ELBOW  
4. 124-5268 I [1] HOSE AS  
5. 1P-7625 [1] ELBOW  
6. 3K-0360 [1] SEAL-O-RING  
7. 9Y-7332 I [1] HOSE AS  
8. 9M-6522 [1] CONNECTOR (1/2-14 NPTF)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22640151
 

104-7997: LINES GP-FUEL INJECTION

104-7997 LINES GP-FUEL INJECTION
S/N 9WK1-805
i00476632 SEBP2264
1047997 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9Y-8258 [1] MANIFOLD-FUEL  
2. 5P-3456 [6] SEAL-O-RING  
3. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
4. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
5. 104-1730 [1] ADAPTER-MANIFOLD  
6. 7X-0902 [1] CONNECTOR  
7. 3J-1907 [10] SEAL-O-RING  
8. 9S-8004 [3] PLUG (9/16-18-THD)  
9. 2R-6806 [2] CONNECTOR  
10. 113-9000 I [1] HOSE AS  
11. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
12. 4J-7533 [1] SEAL-O-RING  
13. 104-1706 [1] VALVE-REGULATOR  
14. 9S-8001 [1] PLUG  
15. 3P-0647 [2] SEAL-O-RING  
16. 030-7947 [1] ADAPTER-ELBOW  
17. 113-9003 I [1] HOSE AS  
18. 104-1729 [1] SPRING  
19. 6K-9194 [1] ELBOW  
20. 9M-8406 [6] CLIP (LOOP)  
21. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
22. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
23. 6V-0852 [1] CAP-DUST  
24. 9S-4191 [1] PLUG (9/16-18-THD)  
25. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
26. 7C-1760 Y [1] FILTER GP-FUEL  
27. 113-9004 I [1] HOSE AS  
28. 6V-1820 M [1] BOLT (M10X1.5X30-MM)  
29. 2Y-5829 M [1] NUT (M10X1.5-THD)  
30. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
31. 6V-3823 M [1] BOLT (M12X1.75X60-MM)  
32. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 6V-8149 M [1] NUT (M12X1.75-THD)  
34. 3G-4005 [1] LINK  
35. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
36. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
37. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
38. 128-0413 [1] PLATE  
39. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
40. 1L-5081 [1] SPACER (0.41X0.75X0.56-IN THK)  
41. 119-3761 [1] SPACER (10.2X20X58.28-MM THK)  
42. 008-6817 [1] ELBOW  
43. 2P-7215 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22640152
 

104-7997: LINES GP-FUEL INJECTION

104-7997 LINES GP-FUEL INJECTION
S/N 9WK806-UP
i00561689 SEBP2264
1047997 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9Y-8258 [1] MANIFOLD-FUEL  
2. 5P-3456 [6] SEAL-O-RING  
3. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
4. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
5. 104-1730 [1] ADAPTER-MANIFOLD  
6. 7X-0902 [1] CONNECTOR  
7. 3J-1907 [11] SEAL-O-RING  
8. 9S-8004 [3] PLUG (9/16-18-THD)  
9. 2R-6806 [2] CONNECTOR  
10. 113-9000 I [1] HOSE AS  
11. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
12. 4J-7533 [1] SEAL-O-RING  
13. 104-1706 [1] VALVE-REGULATOR  
14. 9S-8001 [1] PLUG  
15. 3P-0647 [2] SEAL-O-RING  
16. 030-7947 [1] ADAPTER-ELBOW  
17. 113-9003 I [1] HOSE AS  
18. 104-1729 [1] SPRING  
19. 6K-9194 [1] ELBOW  
20. 9M-8406 [6] CLIP (LOOP)  
21. 6V-5839 [5] WASHER (11X21X2.5-MM THK)  
22. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
23. 6V-0852 [1] CAP-DUST  
24. 9S-4191 [2] PLUG (9/16-18-THD)  
25. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
26. 111-2702 YC [1] FILTER GP-FUEL  
27. 113-9004 I [1] HOSE AS  
28. 6V-1820 M [1] BOLT (M10X1.5X30-MM)  
29. 2Y-5829 M [1] NUT (M10X1.5-THD)  
30. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
31. 6V-3823 M [1] BOLT (M12X1.75X60-MM)  
32. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 6V-8149 M [1] NUT (M12X1.75-THD)  
34. 3G-4005 [1] LINK  
35. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
36. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
37. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
38. 128-0413 [1] PLATE  
39. 6V-1819 M [2] BOLT (M10X1.5X100-MM)  
40. 1L-5081 [1] SPACER (0.41X0.75X0.56-IN THK)  
41. 119-3761 [1] SPACER (10.2X20X58.28-MM THK)  
42. 008-6817 [1] ELBOW  
43. 2P-7215 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22640153
 

113-9014: LINES GP-FUEL INJECTION

113-9014 LINES GP-FUEL INJECTION
S/N 9WK1-808
i00480185 SEBP2264
1139014 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9Y-8258 [1] MANIFOLD-FUEL  
2. 5P-3456 [6] SEAL-O-RING  
3. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
4. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
5. 104-1730 [1] ADAPTER-MANIFOLD  
6. 7X-0902 [1] CONNECTOR  
7. 3J-1907 [11] SEAL-O-RING  
8. 9S-8004 [3] PLUG (9/16-18-THD)  
9. 2R-6806 [2] CONNECTOR  
10. 113-9000 I [1] HOSE AS  
11. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
12. 4J-7533 [1] SEAL-O-RING  
13. 7C-1760 Y [1] FILTER GP-FUEL  
14. 9S-8001 [1] PLUG  
15. 3P-0647 [2] SEAL-O-RING  
16. 030-7947 [2] ADAPTER-ELBOW  
17. 113-9002 I [1] HOSE AS  
18. 9S-4191 [2] PLUG (9/16-18-THD)  
19. 6K-9194 [1] ELBOW  
20. 104-1729 [1] SPRING  
21. 104-1706 [1] VALVE-REGULATOR  
22. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
23. 6V-0852 [1] CAP-DUST  
24. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
25. 113-9001 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22640154
 

113-9014: LINES GP-FUEL INJECTION

113-9014 LINES GP-FUEL INJECTION
S/N 9WK809-UP
i00602480 SEBP2264
1139014 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9Y-8258 [1] MANIFOLD-FUEL  
2. 5P-3456 [6] SEAL-O-RING  
3. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
4. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
5. 104-1730 [1] ADAPTER-MANIFOLD  
6. 7X-0902 [1] CONNECTOR  
7. 3J-1907 [11] SEAL-O-RING  
8. 9S-8004 [3] PLUG (9/16-18-THD)  
9. 2R-6806 [2] CONNECTOR  
10. 113-9000 I [1] HOSE AS  
11. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
12. 4J-7533 [1] SEAL-O-RING  
13. 111-2702 YC [1] FILTER GP-FUEL  
14. 9S-8001 [1] PLUG  
15. 3P-0647 [2] SEAL-O-RING  
16. 030-7947 [2] ADAPTER-ELBOW  
17. 113-9002 I [1] HOSE AS  
18. 9S-4191 [2] PLUG (9/16-18-THD)  
19. 6K-9194 [1] ELBOW  
20. 104-1729 [1] SPRING  
21. 104-1706 [1] VALVE-REGULATOR  
22. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
23. 6V-0852 [1] CAP-DUST  
24. 7C-2919 Y [1] PUMP GP-FUEL PRIMING  
25. 113-9001 I [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22640155
 

104-3711: PUMP GP-FUEL INJECTION

104-3711 PUMP GP-FUEL INJECTION
S/N 9WK1-816
i00473185 SEBP2264
1043711 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9X-7557 [1] SEAL-O-RING  
2. 5P-8347 M [1] BOLT (M8X1.25X70-MM)  
3. 116-8899 [1] INJECTOR GP-FUEL  
4. 7C-8851 [1] CLAMP-INJECTOR  
5. 9X-7722 [1] SEAL-O-RING  
6. 4P-8525 [1] SPACER (9X16X30-MM THK)  
7. 9X-7317 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22640156
 

104-3711: PUMP GP-FUEL INJECTION

104-3711 PUMP GP-FUEL INJECTION
S/N 9WK817-UP
i00660358 SEBP2264
1043711 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9X-7557 [1] SEAL-O-RING  
2. 152-3001 M [1] BOLT (8X1.25X7-MM)(M8X1.25X70MM)  
3. 142-9975 C [1] INJECTOR GP-FUEL  
4. 7C-8851 [1] CLAMP-INJECTOR  
5. 9X-7722 [1] SEAL-O-RING  
6. 4P-8525 [1] SPACER (9X16X30-MM THK)  
7. 9X-7317 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22640157
 

7C-2919: PUMP GP-FUEL PRIMING

7C-2919 PUMP GP-FUEL PRIMING
PART OF 104-7997, 113-9014 LINES GP-FUEL INJECTION
i00404201 SEBP2264
7C2919 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 105-2508 [1] PUMP AS-FUEL PRIMING  
4. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 8T-0640 M [1] BOLT (M6X1X30-MM)  
  M   METRIC PART
 

#SEBP22640158
 

4P-9532: PUMP GP-FUEL TRANSFER

4P-9532 PUMP GP-FUEL TRANSFER
i00373165 SEBP2264
4P9532 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 104-7901 C [1] PUMP GP-FUEL TRANSFER  
2. 8C-0624 [1] SEAL-O-RING  
3. 8T-0292 M [2] BOLT (M8X1.25X90-MM)  
4. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 3K-0360 C [1] SEAL-O-RING  
6. 9X-6650 C [1] CONNECTOR-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22640159
 

2W-4234: SEPARATOR GP-WATER

2W-4234 SEPARATOR GP-WATER
FOR USE WITH MARINE PROPULSION AND MARINE AUXILIARY ENGINES
AN ATTACHMENT
i00359085 SEBP2264
2W4234 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3176B MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-4235 [1] BASE AS  
2. 8N-1590 [1] WASHER  
3. 8F-9206 [1] SEAL-O-RING  
4. 8N-1588 [1] BOLT-SEPARATOR  
5. 2W-4273 [1] VALVE AS-VENT (FUEL, WATER SEPARATOR)  
6. 8N-1589 [1] GASKET-SEPARATOR  
7. 2W-4236 [1] CASE AS  
8. 5B-7890 [1] PLUG-PIPE  
9. 8N-1586 [1] SPRING-SEPARATOR  
10. 4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
11. 8F-4610 [1] RING-RETAINING  
12. 8N-1587 [1] SUPPORT  
13. 8N-1585 [1] SEAL-SEPARATOR  
14. 8N-0205 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

Information:

Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Special Instruction, SEHS9246-01, "Using 9U-6860 Tool Group To Replace Unit Injector Sleeves" Is Available {1713}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Procedure To Investigate Misfires On Engines Equipped With Electronic Unit Injectors (EUI){1290}
1997/05/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Operation and Maintenance Manual
Standard Torque for Worm Drive Band Hose Clamps
3176B Marine Engine
Hose Clamps
3176B Marine Engine
Special Instruction
Using 9U-6860 Tool Group To Replace Unit Injector Sleeves{1290}
Using 9U-6860 Tool Group To Replace Unit Injector Sleeves{1290}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Certain Fuel Injectors Need To Be Removed From Part Stock
Certain Fuel Injectors Need To Be Removed From Part Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Primary Fuel Filter
3176B MARINE ENGINE
Fuel Filter Group
3176B MARINE ENGINE
Electronic Unit Injector Mechanism Group
3176B MARINE ENGINE
Unit Injector Rocker Arm Assembly
3176B MARINE ENGINE
Electronically Controlled Unit Injector
3176B MARINE ENGINE
Standard Torque for Worm Drive Band Hose Clamps
3176B Marine Engine
Hose Clamps
3176B Marine Engine
Torque Specifications
Service Letter-China
Certain Fuel Injectors Need To Be Removed From Part Stock
Certain Fuel Injectors Need To Be Removed From Part Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter & Fuel Filter Base
3176B MARINE ENGINE
Fuel Manifold & Siphon Block
3176B MARINE ENGINE
EUI (Electronic Unit Injectors)
3176B MARINE ENGINE
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3176B :

110-0498 KIT-FUEL LINES
110-0497 KIT-FUEL LINES
INJECTOR GP-FUEL
170-5235 INJECTOR GP-FUEL
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
7C-1760 FILTER GP-FUEL
FILTER GP-FUEL
111-2702 FILTER GP-FUEL
FILTER GP-FUEL
111-2702 FILTER GP-FUEL
LINES GP-FUEL INJECTION
104-7997 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
104-7997 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
113-9014 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
113-9014 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
104-3711 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
104-3711 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
7C-2919 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
4P-9532 PUMP GP-FUEL TRANSFER

Truck sale: