3V-0136 CYLINDER & SEAL GP-TILT S/N 4CL1-99999 PART OF 9U-3766 HYDRAULIC AR 960F WHEEL LOADER

HYDRAULIC SYSTEM

CYLINDER GP

0. 3V-0136 CYLINDER &
1. 1U-1147 CYLINDER G
2. 1U-1147 CYLINDER G
3. 1U-1148 CYLINDER G
4. 1U-1148 CYLINDER G
5. 3G-8786 CYLINDER G
6. 3G-8786 CYLINDER G

HYDRAULIC GP

7. 9U-3766 HYDRAULIC

KICKOUT & POSITIONER GP

8. 9C-9750 KICKOUT &

LINES GP-HYDRAULIC

9. 7V-8359 LINES GP-H
0. INFORMATION

WHEEL LOADER 960F WHEEL LOADER 4CL
960F Wheel Loader 4CL00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2266 960F 4CL (1992)

HYDRAULIC SYSTEM

CYLINDER GP

7V-5516 CYLINDER & SEAL GP-LIFT

7V-5517 CYLINDER & SEAL GP-LIFT

3V-0136 CYLINDER & SEAL GP-TILT

1U-1147 CYLINDER GP-LIFT

1U-1148 CYLINDER GP-LIFT

3G-8786 CYLINDER GP-TILT

#SEBP22660380

3V-0136: CYLINDER & SEAL GP-TILT

CYLINDER & SEAL GP-TILT

3V-0136 CYLINDER & SEAL GP-TILT
S/N 4CL1-99999
PART OF 9U-3766 HYDRAULIC AR

i00187360 SEBP2266

3V0136 CYLINDER & SEAL GP-TILT Parts scheme

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8786 Y	[1]	CYLINDER GP-TILT
2.	7K-9210	[4]	SEAL-LIP TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP22660381

1U-1147: CYLINDER GP-LIFT

CYLINDER GP-LIFT

1U-1147 CYLINDER GP-LIFT -LH
S/N 4CL1-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5516 CYLINDER & SEAL GP-LIFT
Type 1

i00187272 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8792	[1]	CYLINDER AS
2.	4V-8674	[1]	BUSHING
3.	3J-9545	[1]	LOCKNUT (2-12-THD)
4.	1J-0708 JW	[1]	RING-WEAR
5.	8J-1818	[1]	PISTON
6.	8C-9173 JW	[1]	SEAL AS
7.	2K-3258 JW	[1]	RING-BACKUP
8.	5H-3252 JW	[1]	SEAL-O-RING
9.	9T-7345 C	[1]	HEAD
10.	1D-4626	[4]	BOLT (7/8-9X2.75-IN)
11.	5P-8249	[4]	WASHER-HARD (24X41.5X4-MM THK)
12.	8C-9126 CJW	[1]	SEAL AS
13.	5J-8300 JW	[1]	SEAL-U-CUP
14.	8C-5218 CJW	[1]	SEAL-LIP TYPE
15.	9T-0988	[1]	ROD AS
16.	8T-7584 CJ	[1]	RING-WEAR
17.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
18.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)

			AVAILABLE REPAIR KIT(S):
	8C-9173	[1]	SEAL AS
			(INCLUDES RINGS)
	7X-2698	[1]	KIT-SEAL
			(INCLUDES RINGS)
	244-2064 W	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
	244-2062 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392 FOUND IN SISWEB)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	W		KIT MARKED W SERVICES PART(S) MARKED W

#SEBP22660382

1U-1147: CYLINDER GP-LIFT

CYLINDER GP-LIFT

1U-1147 CYLINDER GP-LIFT -LH
S/N 4CL1-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5516 CYLINDER & SEAL GP-LIFT
Type 2

i00187273 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8792	[1]	CYLINDER AS
2.	4V-8674	[1]	BUSHING
3.	3J-9545	[1]	LOCKNUT (2-12-THD)
4.	1J-0708 JW	[1]	RING-WEAR
5.	8J-1818	[1]	PISTON
6.	8C-9173 JW	[1]	SEAL AS
7.	2K-3258 JW	[1]	RING-BACKUP
8.	5H-3252 JW	[1]	SEAL-O-RING
9.	124-2806 C	[1]	HEAD
10.	1D-4626	[4]	BOLT (7/8-9X2.75-IN)
11.	5P-8249	[4]	WASHER-HARD (24X41.5X4-MM THK)
12.	167-2208 JW	[1]	SEAL AS-BUFFER
13.	167-2319 JW	[1]	SEAL-U-CUP
14.	167-2469 JW	[1]	SEAL-WIPER
15.	9T-0988	[1]	ROD AS
16.	8T-7584 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	8C-9173	[1]	SEAL AS
			(INCLUDES RINGS)
	7X-2698	[1]	KIT-SEAL
			(INCLUDES RINGS)
	244-2064 W	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
	244-2062 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392 FOUND IN SISWEB)
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	W		KIT MARKED W SERVICES PART(S) MARKED W

#SEBP22660383

1U-1148: CYLINDER GP-LIFT

CYLINDER GP-LIFT

1U-1148 CYLINDER GP-LIFT -RH
S/N 4CL1-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5517 CYLINDER & SEAL GP-LIFT
Type 1

i00187274 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8792	[1]	CYLINDER AS
2.	4V-8674	[1]	BUSHING
3.	3J-9545	[1]	LOCKNUT (2-12-THD)
4.	1J-0708	[1]	RING-WEAR
5.	8J-1818	[1]	PISTON
6.	8C-9173	[1]	SEAL AS
7.	2K-3258	[1]	RING-BACKUP
8.	5H-3252	[1]	SEAL-O-RING
9.	9T-7345 C	[1]	HEAD
10.	1D-4626	[4]	BOLT (7/8-9X2.75-IN)
11.	5P-8249	[4]	WASHER-HARD (24X41.5X4-MM THK)
12.	8C-9126 C	[1]	SEAL AS
13.	5J-8300	[1]	SEAL-U-CUP
14.	8C-5218 C	[1]	SEAL-LIP TYPE
15.	9T-0988	[1]	ROD AS
16.	8T-7584 C	[1]	RING-WEAR
17.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
18.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22660384

1U-1148: CYLINDER GP-LIFT

CYLINDER GP-LIFT

1U-1148 CYLINDER GP-LIFT -RH
S/N 4CL1-99999
152.4 MM BORE X 751 MM STROKE
PART OF 7V-5517 CYLINDER & SEAL GP-LIFT
Type 2

i00187275 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8792	[1]	CYLINDER AS
2.	4V-8674	[1]	BUSHING
3.	3J-9545	[1]	LOCKNUT (2-12-THD)
4.	1J-0708	[1]	RING-WEAR
5.	8J-1818	[1]	PISTON
6.	8C-9173	[1]	SEAL AS
7.	2K-3258	[1]	RING-BACKUP
8.	5H-3252	[1]	SEAL-O-RING
9.	124-2806 C	[1]	HEAD
10.	1D-4626	[4]	BOLT (7/8-9X2.75-IN)
11.	5P-8249	[4]	WASHER-HARD (24X41.5X4-MM THK)
12.	167-2208	[1]	SEAL AS-BUFFER
13.	167-2319	[1]	SEAL-U-CUP
14.	167-2469	[1]	SEAL-WIPER
15.	9T-0988	[1]	ROD AS
16.	8T-7584	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	7X-2698	[1]	KIT-SEAL
			(INCLUDES SEALS & RINGS)
	8C-5808	[1]	KIT-SEAL
			(INCLUDES SEALS & RINGS)
	8C-5809	[1]	KIT-SEAL
			(INCLUDES SEALS & RINGS)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22660385

3G-8786: CYLINDER GP-TILT

CYLINDER GP-TILT

3G-8786 CYLINDER GP-TILT
S/N 4CL1-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
Type 1

i00187333 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8785	[1]	CYLINDER AS
	7D-4726	[1]	BLOCK
2.	3G-9191	[1]	BUSHING
3.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
4.	6E-2192	[1]	PISTON
5.	9T-3503	[1]	HEAD
6.	1A-5576	[2]	BOLT (7/8-9X4.5-IN)
7.	5P-8249	[8]	WASHER-HARD (24X41.5X4-MM THK)
8.	6E-2191	[1]	ROD AS
9.	3G-8779	[1]	BUSHING
10.	8T-8389	[1]	SEAL-WIPER
11.	5J-8325	[1]	SEAL-U-CUP
12.	1D-4628	[6]	BOLT (7/8-9X3.25-IN)
13.	8C-9121	[1]	SEAL AS
14.	9F-1399	[1]	SEAL-O-RING
	4J-9218	[1]	RING-BACKUP
15.	5J-4997	[1]	SEAL AS
16.	3G-5098	[1]	RING-WEAR
17.	8T-6745	[1]	RING-WEAR
18.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
19.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22660386

3G-8786: CYLINDER GP-TILT

CYLINDER GP-TILT

3G-8786 CYLINDER GP-TILT
S/N 4CL1-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
Type 2

i00187334 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	3G-8785	[1]	CYLINDER AS
	7D-4726	[1]	BLOCK
2.	3G-9191	[1]	BUSHING
3.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
4.	6E-2192	[1]	PISTON
5.	124-2726 C	[1]	HEAD
6.	1A-5576	[2]	BOLT (7/8-9X4.5-IN)
7.	5P-8249	[8]	WASHER-HARD (24X41.5X4-MM THK)
8.	6E-2191	[1]	ROD AS
9.	3G-8779	[1]	BUSHING
10.	8T-8389	[1]	SEAL-WIPER
11.	5J-8325	[1]	SEAL-U-CUP
12.	1D-4628	[6]	BOLT (7/8-9X3.25-IN)
13.	8C-9121	[1]	SEAL AS
14.	9F-1399	[1]	SEAL-O-RING
	4J-9218	[1]	RING-BACKUP
15.	5J-4997	[1]	SEAL AS
16.	3G-5098	[1]	RING-WEAR
17.	8T-6745	[1]	RING-WEAR
18.	9T-2584 C	[1]	RING-RETAINING (INTERNAL)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22660387

9U-3766: HYDRAULIC AR

HYDRAULIC AR

9U-3766 HYDRAULIC AR
S/N 4CL1-99999
PART OF 6C-8400 GENERAL AR

i00189967 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Part No	Qty	Parts name
7V-5516 Y	[1]	CYLINDER & SEAL GP-LIFT
7V-5517 Y	[1]	CYLINDER & SEAL GP-LIFT
3V-0136 Y	[1]	CYLINDER & SEAL GP-TILT
9C-9750 Y	[1]	KICKOUT & POSITIONER GP
7V-8359 Y	[1]	LINES GP-HYDRAULIC
9C-8382 Y	[1]	LINES GP-LIFT CYLINDER
106-0431 Y	[1]	LINES GP-PILOT
8R-3546 Y	[1]	LINES GP-TILT CYLINDER
3V-0132 Y	[1]	MOUNTING GP-HYDRAULIC TANK
106-0433 Y	[1]	PUMP & MTG GP-HYDRAULIC
6C-8683 Y	[1]	TANK & FILTER GP-HYDRAULIC
7I-3232 Y	[1]	VALVE & MTG GP-MAIN CONTROL (2-FUNCTION)
Y		SEPARATE ILLUSTRATION

#SEBP22660388

9C-9750: KICKOUT & POSITIONER GP

KICKOUT & POSITIONER GP

9C-9750 KICKOUT & POSITIONER GP
S/N 4CL1-99999
PART OF 9U-3766 HYDRAULIC AR

i00188045 SEBP2266

9C9750 KICKOUT & POSITIONER GP Parts scheme

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	4L-6454 C	[2]	BOLT (3/8-16X1-IN)
2.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	5V-1410	[1]	HOLDER (SWITCH)
4.	4M-6425	[2]	BOLT (5/16-18X1-IN)
5.	8T-4223 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	8C-0566 C	[2]	WASHER (10.2X25.5X2.5-MM THK)
7.	9X-9509 C	[1]	CONTROL GP-LIFT KICKOUT
8.	5V-2787	[1]	MAGNET AS
9.	5P-1075 C	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
10.	3K-7092	[2]	NUT AS-SPRING
11.	7X-0388	[2]	BOLT (7/8-9X4.5-IN)
12.	7X-0545	[2]	WASHER-HARD (24X40X5-MM THK)
13.	4E-5210 C	[1]	TUBE AS
14.	4E-5209 C	[1]	BRACKET
15.	6V-9025 C	[1]	SETSCREW
16.	5S-7383 C	[2]	BOLT (3/8-16X1.75-IN)
17.	8T-3601	[4]	SETSCREW-SOCKET (1/4-20-THD)
18.	4V-4840	[1]	MAGNET AS
19.	8T-8917 C	[2]	BOLT (1/2-13X1.25-IN)
20.	8C-3121 C	[2]	BOLT (5/16-18X1.5-IN)
21.	4E-5213 C	[1]	COVER AS
22.	3E-5493 C	[1]	CONTROL GP-BUCKET POSITIONER
23.	5D-0353 C	[2]	BOLT-LOCKING (3/8-16X1-IN)
24.	8M-7145 C	[2]	WASHER (10.2X28.5X5-MM THK)
25.	7X-0579	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP22660389

7V-8359: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

7V-8359 LINES GP-HYDRAULIC
S/N 4CL1-99999
PART OF 9U-3766 HYDRAULIC AR

i00187770 SEBP2266

For full view, you need register

Parts for your 960F WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	109-3573 CI	[1]	HOSE AS
2.	7X-0326	[2]	BOLT (1/2-13X3-IN)
3.	7X-0345	[4]	BOLT (5/8-11X1.75-IN)
4.	8T-8916	[18]	BOLT (7/16-14X1.5-IN)
	8T-5360	[18]	WASHER (12X22.5X2.5-MM THK)
5.	1P-4578	[8]	FLANGE-HALF
	4J-0522	[4]	SEAL-O-RING
6.	5P-7470	[1]	CLIP (SLOT)
	5P-7471	[1]	CLIP (TAB)
7.	5P-8182	[1]	GROMMET (46-MM ID)
8.	7X-3327	[1]	BOLT-LOCKING (1/2-13X1.25-IN)
9.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	7V-6428	[1]	KEEPER
11.	8T-8919	[4]	BOLT (1/2-13X1.75-IN)
12.	1P-4579	[4]	FLANGE-HALF
	8T-7214	[2]	SEAL (54.55-MM ID)
13.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	3J-1907	[1]	SEAL-O-RING
	6V-0852	[1]	CAP-DUST
14.	8J-5914	[1]	PLUG
	2S-4078	[1]	SEAL-O-RING
15.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
16.	8T-8920	[2]	BOLT (1/2-13X3.25-IN)
17.	5V-8898	[1]	ELBOW
18.	1P-3705	[2]	SEAL-RECTANGULAR
19.	5P-2424	[2]	BOLT (1/2-13X2.25-IN)
20.	4V-1776 I	[1]	HOSE AS
21.	2H-6338	[2]	SEAL-O-RING
22.	6C-1511	[1]	TUBE AS
23.	3V-0928	[1]	PLATE
24.	4V-1775 I	[1]	HOSE AS
25.	8T-4985	[2]	CLAMP-HOSE
26.	3V-0937	[1]	ELBOW
27.	8T-4835	[2]	BOLT (1/2-13X2-IN)
28.	1P-4585	[2]	FLANGE-HALF
29.	7X-0347	[4]	BOLT (5/8-11X2.25-IN)
30.	8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
31.	3V-0932	[1]	TUBE AS
32.	4V-1878	[1]	HOSE
33.	6E-3528 Y	[1]	VALVE GP-BREAKER RELIEF
	3D-2824	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

The Stem Of Lift Cylinder Hoses May Interfere With Loader Frame
The Stem Of Lift Cylinder Hoses May Interfere With Loader Frame

The Stem of Lift Cylinder Hoses May Interfere With Loader Frame
The Stem of Lift Cylinder Hoses May Interfere With Loader Frame

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Tilt Cylinder
960F WHEEL LOADER HYDRAULIC SYSTEM

Lift Cylinders
960F WHEEL LOADER HYDRAULIC SYSTEM

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Bench Test Procedures

Disassembly and Assembly

Tilt Cylinder
960F WHEEL LOADER MACHINE SYSTEMS

Lift Cylinders
960F WHEEL LOADER MACHINE SYSTEMS

Service Magazine

New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26

Troubleshooting Procedure For Excessive Lift And Tilt Cylinder Drift{5102,5104,5143,7569}
1996/06/03

Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562}
1996/08/12

Pilot Valve Group Available To Reduce Drift Related Problems In The Lift And Tilt Cylinders {5143,5102,5104}
1997/11/24

Torque Increased For Locknut That Retains Piston In Tilt Cylinder To Ensure Retention Of Piston{5104}
1998/04/20

Correction To Hydraulic System Specification Manual SENR6672 {5104,7568}
1999/01/25

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 960F :

7V-5517 CYLINDER & SEAL GP-LIFT

7V-5516 CYLINDER & SEAL GP-LIFT

9U-1827 CONTROL AR-RIDE

6C-8872 CONTROL AR-RIDE

117-5100 CONTROL AR-RIDE

4T-2626 CARTRIDGE GP-VANE PUMP

100-2961 CARTRIDGE GP-VANE PUMP

122-4780 ACCUMULATOR & MTG GP-RIDE CONT

1U-1147 CYLINDER GP-LIFT

1U-1148 CYLINDER GP-LIFT

3G-8786 CYLINDER GP-TILT

9U-3766 HYDRAULIC AR

9C-9750 KICKOUT & POSITIONER GP

Truck sale:

49,000 USD

Caterpillar 960F, Construction
- Wheel Loaders
MILTON CAT

CATERPILLAR 960F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $38,000

1997 CAT 960F

JB Earthmoving Equipment LLC
Georgia

USD $42,403

1995 CAT 960F

BIG MACHINERY BV
Velddriel, The Netherlands

USD $35,315

1996 CAT 960F

AMMAR GENERAL TRADING

3V-0136 CYLINDER & SEAL GP-TILT S/N 4CL1-99999 PART OF 9U-3766 HYDRAULIC AR 960F WHEEL LOADER

HYDRAULIC SYSTEM

3V-0136: CYLINDER & SEAL GP-TILT

Parts for your 960F WHEEL LOADER:

1U-1147: CYLINDER GP-LIFT

Parts for your 960F WHEEL LOADER:

1U-1147: CYLINDER GP-LIFT

Parts for your 960F WHEEL LOADER:

1U-1148: CYLINDER GP-LIFT

Parts for your 960F WHEEL LOADER:

1U-1148: CYLINDER GP-LIFT

Parts for your 960F WHEEL LOADER:

3G-8786: CYLINDER GP-TILT

Parts for your 960F WHEEL LOADER:

3G-8786: CYLINDER GP-TILT

Parts for your 960F WHEEL LOADER:

9U-3766: HYDRAULIC AR

Parts for your 960F WHEEL LOADER:

9C-9750: KICKOUT & POSITIONER GP

Parts for your 960F WHEEL LOADER:

7V-8359: LINES GP-HYDRAULIC

Parts for your 960F WHEEL LOADER:

Information:

Caterpillar Parts SIS Catalog 960F :

Truck sale:

Modal