AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-4497 PUMP GP-FUEL INJECTION S/N 2WJ1-UP PART OF 6I-4496 PUMP GP-GOV & FUEL INJ Type 1 3412 GEN SET ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
GOVERNOR GP
SEPARATOR GP-WATER
GOVERNOR GP

GEN SET ENGINE 3412 GEN SET ENGINE 2WJ
 3412 Generator Set Engine 2WJ00001-UP SEBP2268 3412 2WJ   (1989)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4497 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4497 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
6I-2356 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6I-2357 PUMP GP-GOV & FUEL INJ
 

#SEBP22680390
 

6I-4497: PUMP GP-FUEL INJECTION

6I-4497 PUMP GP-FUEL INJECTION
S/N 2WJ1-UP
PART OF 6I-4496 PUMP GP-GOV & FUEL INJ
Type 1
i00399508 SEBP2268
6I4497 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [26] BOLT (1/4-20X0.75-IN)  
2. 9S-8001 [2] PLUG  
3. 4J-7533 [2] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 3J-7354 [1] SEAL-O-RING  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 9Y-6088 [2] COVER-FUEL GALLERY  
8. 9Y-6087 [2] GASKET-GALLERY  
9. 4P-2899 [12] BUSHING-TERMINAL  
10. 7E-4847 [12] SEAL-O-RING  
11. 7E-9907 [12] SPACER (34.8X42.125X6.76-MM THK)  
12. 4P-7681 Y [12] PUMP GP-FUEL INJECTION  
13. 4P-7903 [1] RACK AS-REGULATING  
  7W-7819 [1] MAGNET  
14. 7E-6011 [12] LIFTER AS  
15. 9Y-6090 [1] PLATE  
16. 6I-4498 [1] CAMSHAFT AS-PUMP  
  1H-0974 [1] DOWEL  
  [1] CAMSHAFT-FUEL PUMP  
  9Y-6161 [1] DOWEL-ORIFICE  
17. 4P-7326 [1] RACK-REGULATOR  
18. 4P-7884 [1] PLATE AS  
19. 9Y-7515 [1] ADAPTER AS  
20. 1T-0099 [1] PIN-SPRING  
21. 8S-6814 [6] PIN  
22. 9S-8007 [4] PLUG  
  7J-0204 [4] SEAL-O-RING  
23. 1M-4291 [2] DOWEL  
24. 7B-2742 [6] BOLT (1/4-20X1.25-IN)  
25. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
26. 4P-7359 [1] HOUSING AS-PUMP  
27. 7E-6003 [1] BUSHING (CENTER)  
28. 9Y-6120 [1] BEARING-RACK  
29. 4P-7045 [12] DOWEL  
30. 4P-6607 [1] BUSHING  
31. 4K-8603 [1] PLUG-CUP  
32. 9Y-6118 [2] DOWEL-HOLLOW  
33. 4P-6608 [1] BUSHING  
34. 7E-9990 [1] BEARING-RACK  
35. 4P-8480 [12] PIN-PUMP GUIDE  
36. 4P-7883 [1] GASKET-FUEL PUMP HOUSING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680391
 

6I-4497: PUMP GP-FUEL INJECTION

6I-4497 PUMP GP-FUEL INJECTION
S/N 2WJ1-UP
PART OF 6I-4496 PUMP GP-GOV & FUEL INJ
Type 2
i00399513 SEBP2268
6I4497 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [26] BOLT (1/4-20X0.75-IN)  
2. 9S-8001 [2] PLUG  
3. 4J-7533 [2] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 3J-7354 [1] SEAL-O-RING  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 9Y-6088 [2] COVER-FUEL GALLERY  
8. 9Y-6087 [2] GASKET-GALLERY  
9. 113-7794 [12] BUSHING  
10. 131-3719 [12] SEAL-O-RING  
11. 7E-9907 [12] SPACER (34.8X42.125X6.76-MM THK)  
12. 108-6633 Y [1] PUMP GP-FUEL INJECTION  
13. 4P-7903 [1] RACK AS-REGULATING  
  7W-7819 [1] MAGNET  
14. 7E-6011 [12] LIFTER AS  
15. 9Y-6090 [1] PLATE  
16. 6I-4498 [1] CAMSHAFT AS-PUMP  
  6I-3623 [1] DOWEL  
  [1] CAMSHAFT-FUEL PUMP  
  9Y-6161 [1] DOWEL-ORIFICE  
17. 4P-7326 [1] RACK-REGULATOR  
18. 4P-7884 [1] PLATE AS  
19. 9Y-7515 [1] ADAPTER AS  
20. 1T-0099 [1] PIN-SPRING  
21. 8S-6814 [6] PIN  
22. 9S-8007 [4] PLUG  
  7J-0204 [4] SEAL-O-RING  
23. 1M-4291 [2] DOWEL  
24. 7B-2742 [6] BOLT (1/4-20X1.25-IN)  
25. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
26. 4P-7359 [1] HOUSING AS-PUMP  
27. 7E-6003 [1] BUSHING (CENTER)  
28. 9Y-6120 [1] BEARING-RACK  
29. 4P-7045 [12] DOWEL  
30. 4P-6607 [1] BUSHING  
31. 4K-8603 [1] PLUG-CUP  
32. 9Y-6118 [2] DOWEL-HOLLOW  
33. 4P-6608 [1] BUSHING  
34. 7E-9990 [1] BEARING-RACK  
35. 4P-8480 [12] PIN-PUMP GUIDE  
36. 4P-7883 [1] GASKET-FUEL PUMP HOUSING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680392
 

145-8855: PUMP GP-FUEL PRIMING

145-8855 PUMP GP-FUEL PRIMING
S/N 2WJ1-UP
i00658601 SEBP2268
1458855 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 137-5541 [1] PUMP GP-FUEL PRIMING  
3. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
4. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
 

#SEBP22680393
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
S/N 2WJ1-1839
i00107921 SEBP2268
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP22680394
 

6I-2356: PUMP GP-GOV & FUEL INJ

6I-2356 PUMP GP-GOV & FUEL INJ
S/N 2WJ1-UP
i00394134 SEBP2268
6I2356 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2357 Y [1] PUMP GP-GOV & FUEL INJ  
2. 105-2939 [1] SOLENOID-ROTARY (FUEL PUMP)  
3. 2H-3931 [1] SEAL-O-RING  
4. 4W-2482 [2] CLAMP  
5. 5B-7040 [2] BOLT (1/4-20X1-IN)  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 6I-0972 [1] GASKET  
8. 0S-1616 [7] BOLT (1/4-20X1-IN)  
9. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
10. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
11. 4B-4909 [1] SPRING  
12. 9Y-6042 [1] GASKET-OIL PUMP  
13. 108-3797 Y [1] SERVO GP-ROTARY  
14. 1F-4111 [2] BOLT (5/16-18X3.5-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 4P-9667 [1] COLLAR  
16. 8C-0624 [1] SEAL-O-RING  
17. 105-7573 [1] PUMP GP-FUEL TRANSFER  
18. 4W-2480 [1] NUT  
19. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 3E-0445 [1] CONTROL GP-ENGINE ELECTRONIC  
    (RACK SENSOR FOR ELECTRONIC FUEL SYSTEM)
21. 7F-8607 [1] SEAL-O-RING  
22. 6I-0973 [1] PLATE  
23. 6V-1903 [1] SEAL-O-RING  
24. 3E-0076 [1] SOLENOID AS (4/28-VOLT)(FUEL SHUTOFF)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
25. 4P-8033 [1] BRACKET AS  
  7C-2642 [3] CLIP (21.8-MM ID)  
  7C-2644 [1] CLIP (32.5-MM ID)  
  8C-3334 [8] RIVET-TUBULAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680395
 

6I-2357: PUMP GP-GOV & FUEL INJ

6I-2357 PUMP GP-GOV & FUEL INJ
S/N 2WJ1-UP
PART OF 6I-2356 PUMP GP-GOV & FUEL INJ
i00394136 SEBP2268
6I2357 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2358 Y [1] PUMP GP-FUEL INJECTION  
2. 4P-8235 Y [1] GOVERNOR GP  
3. 9Y-6074 [1] LINK-RACK  
4. 128-5463 [1] PIN-CONTROL  
5. 105-2504 [1] SUPPORT AS  
6. 1S-5440 [1] DOWEL  
7. 103-0082 [1] HOUSING AS-DRIVE  
  9F-2247 [1] PLUG-PIPE (1/8-27-THD)(4.90-MM HEX)  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
  103-1216 [1] PLUG (3/8-32-THD)(6.35-MM HEX)  
  7J-0204 [1] SEAL-O-RING  
8. 9Y-6076 [1] BAR-RACK CONTROL  
9. 6I-1324 [1] GEAR AS (23-TEETH)  
10. 3B-7614 [2] BOLT (3/8-16X4-IN)  
11. 9Y-8058 [1] GASKET  
12. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
13. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 7B-8167 [1] BOLT (1/4-20X1.625-IN)  
15. 1B-2714 [1] BOLT (1/4-20X2.5-IN)  
16. 104-5604 [1] WASHER (7.2X25X2-MM THK)  
17. 0S-1616 [2] BOLT (1/4-20X1-IN)  
18. 1B-2713 [3] BOLT (1/4-20X1.75-IN)  
19. 4N-1767 [1] VALVE-BYPASS (FUEL INJECTION PUMP)  
20. 9Y-6083 [1] SPRING-VALVE  
21. 3K-0360 [1] SEAL-O-RING  
22. 9Y-6084 [1] VALVE AS-BYPASS (FUEL INJECTION PUMP)  
23. 9Y-6086 [1] HOUSING-VALVE  
24. 1J-9671 [1] SEAL-O-RING  
25. 104-5010 [1] PLUG-RACK  
26. 177-1450 [2] BOLT-SOCKET HEAD  
27. 104-5603 [2] BOLT (1/4-28X1-IN)  
28. 2A-4781 [2] BOLT (1/4-20X2.75-IN)  
29. 1W-9509 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680396
 

6I-4495: PUMP GP-GOV & FUEL INJ

6I-4495 PUMP GP-GOV & FUEL INJ
S/N 2WJ1-274
i00399503 SEBP2268
6I4495 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4496 Y [1] PUMP GP-GOV & FUEL INJ  
2. 105-2939 [1] SOLENOID-ROTARY (FUEL PUMP)  
3. 2H-3931 [1] SEAL-O-RING  
4. 4W-2482 [2] CLAMP  
5. 5B-7040 [2] BOLT (1/4-20X1-IN)  
6. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
7. 6I-0972 [1] GASKET  
8. 0S-1616 [7] BOLT (1/4-20X1-IN)  
9. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
10. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
11. 4B-4909 [1] SPRING  
12. 9Y-6042 [1] GASKET-OIL PUMP  
13. 108-3797 Y [1] SERVO GP-ROTARY  
14. 1F-4111 [2] BOLT (5/16-18X3.5-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 4P-9667 [1] COLLAR  
16. 8C-0624 [1] SEAL-O-RING  
17. 105-7573 [1] PUMP GP-FUEL TRANSFER  
18. 4W-2480 [1] NUT  
19. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 3E-0445 [1] CONTROL GP-ENGINE ELECTRONIC  
    (RACK SENSOR FOR ELECTRONIC FUEL SYSTEM)
21. 7F-8607 [1] SEAL-O-RING  
22. 6I-0973 [1] PLATE  
23. 6V-1903 [1] SEAL-O-RING  
24. 3E-0076 [1] SOLENOID AS (4/28-VOLT)(FUEL SHUTOFF)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
25. 4P-8033 [1] BRACKET AS  
  7C-2642 [3] CLIP (21.8 MM ID)  
  7C-2644 [1] CLIP (32.5 MM ID)  
  8C-3334 [8] RIVET-TUBULAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680397
 

6I-4496: PUMP GP-GOV & FUEL INJ

6I-4496 PUMP GP-GOV & FUEL INJ
S/N 2WJ1-274
PART OF 6I-4495 PUMP GP-GOV & FUEL INJ
i00399506 SEBP2268
6I4496 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4497 Y [1] PUMP GP-FUEL INJECTION  
2. 4P-8235 Y [1] GOVERNOR GP  
3. 9Y-6074 [1] LINK-RACK  
4. 128-5463 [1] PIN-CONTROL  
5. 105-2504 [1] SUPPORT AS  
6. 1S-5440 [1] DOWEL  
7. 103-0082 [1] HOUSING AS-DRIVE  
  9F-2247 [1] PLUG-PIPE (1/8-27-THD)(4.90MM HEX)  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
  103-1216 [1] PLUG (3/8-32-THD)(6.35MM HEX)  
  7J-0204 [1] SEAL-O-RING  
8. 9Y-6076 [1] BAR-RACK CONTROL  
9. 6I-1324 [1] GEAR AS (23 TEETH)  
10. 3B-7614 [2] BOLT (3/8-16X4-IN)  
11. 9Y-8058 [1] GASKET  
12. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
13. 5P-0537 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 7B-8167 [1] BOLT (1/4-20X1.625-IN)  
15. 1B-2714 [1] BOLT (1/4-20X2.5-IN)  
16. 104-5604 [1] WASHER (7.2X25X2-MM THK)  
17. 0S-1616 [2] BOLT (1/4-20X1-IN)  
18. 1B-2713 [3] BOLT (1/4-20X1.75-IN)  
19. 4N-1767 [1] VALVE-BYPASS  
20. 9Y-6083 [1] SPRING-VALVE  
21. 3K-0360 [1] SEAL-O-RING  
22. 9Y-6084 [1] VALVE AS-BYPASS  
23. 9Y-6086 [1] HOUSING-VALVE  
24. 1J-9671 [1] SEAL-O-RING  
25. 104-5010 [1] PLUG-RACK  
26. 1H-3340 [2] BOLT (10-24X1-IN)  
27. 104-5603 [2] BOLT (1/4-28X1-IN)  
28. 2A-4781 [2] BOLT (1/4-20X2.75-IN)  
29. 1W-9509 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22680398
 

4P-7380: SEPARATOR GP-WATER

4P-7380 SEPARATOR GP-WATER -PRIMARY FUEL FILTER
S/N 2WJ1-UP
PART OF 155-5092 TANK AS-FUEL
AN ATTACHMENT
i00540685 SEBP2268
4P7380 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [2] SEAL-O-RING  
2. 134-6307 [2] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
    (INCLUDES FILTER ELEMENT & SEALS)
3. 4P-7383 [6] GASKET  
4. 4P-7381 [2] BOWL AS  
5. 2M-9780 [4] SEAL-O-RING  
6. 1J-9671 [2] SEAL-O-RING  
7. 4J-5477 [2] SEAL-O-RING  
 

#SEBP22680399
 

108-3797: SERVO GP-ROTARY

108-3797 SERVO GP-ROTARY -FUEL INJ PUMP
S/N 2WJ1-UP
PART OF 6I-2356, 6I-4495 PUMP GP-GOV & FUEL INJ
i00482317 SEBP2268
1083797 SERVO GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 3412 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1616 [1] BOLT (1/4-20X1-IN)  
2. 1H-1023 [1] SEAL-O-RING (9.25-MM ID)  
3. 2D-6392 [1] SEAL-O-RING (6.07-MM ID)  
4. 4N-0605 [1] SPRING  
5. 4N-1767 [1] VALVE-BYPASS (FUEL INJECTION PUMP)  
6. 5H-2532 [1] KEY-WOODRUFF  
7. 7B-8167 [1] BOLT (1/4-20X1.625-IN)  
8. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
9. 005-8593 [1] SEAL-O-RING (52.07-MM ID)  
10. 108-3795 [1] COVER-OIL PUMP  
11. 108-3796 [1] COVER-SERVO OIL PUMP BYPASS  
12. 108-4420 [1] GASKET  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3412 :

PUMP GP-FUEL INJECTION
6I-2358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2358 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PROTECTION GP-FUEL SYSTEM
186-2548 PROTECTION GP-FUEL SYSTEM
PLUG GP-WATER SEPARATOR
180-6307 PLUG GP-WATER SEPARATOR
MOUNTING GP-PRIMARY FUEL FLTR
6N-3212 MOUNTING GP-PRIMARY FUEL FLTR
LINES GP-FUEL INJECTION
9Y-5275 LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-4497 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
145-8855 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-GOV & FUEL INJ
6I-2356 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6I-2357 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6I-4495 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6I-4496 PUMP GP-GOV & FUEL INJ
SEPARATOR GP-WATER
4P-7380 SEPARATOR GP-WATER

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.