ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPBATTERY GP
SOLENOID GP
BASIC ENGINE
ENGINE BRAKE GPELECTRICAL AND STARTING SYSTEM
VALVE GPSTARTING MOTOR GP
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
#SEBP22690500
6V-4940: STARTING MOTOR GP-ELECTRIC
6V-4940 STARTING MOTOR GP-ELECTRIC
S/N 9TL1-23814
24 VOLT
PART OF 207-1545, 6V-4641 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1545@@@@@
AN ATTACHMENT
S/N 9TL1-23814
24 VOLT
PART OF 207-1545, 6V-4641 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1545@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 2. | 7X-0562 | [3] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 3. | 4B-2049 | [1] | NUT (10-32-THD) | |
| 4. | 8F-1434 | [1] | LOCKWASHER | |
| 5. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 3E-0147 | [1] | HOUSING AS | |
| 9. | 3E-0141 | [1] | STOP-STARTING MOTOR | |
| 10. | 4N-7521 | [1] | RING-LOCK | |
| 11. | 3E-0143 | [1] | DRIVE AS-STARTING MOTOR | |
| 12. | 3E-0144 | [1] | HOUSING AS | |
| 13. | 3E-0140 | [1] | LEVER AS-STARTING MOTOR | |
| 14. | 3E-0138 | [1] | ARMATURE AS (24-VOLT) | |
| 15. | 3E-0137 | [1] | HOLDER AS-BRUSH (STARTING MOTOR) | |
| 16. | 3E-0135 | [1] | SOLENOID AS (24-VOLT) | |
| 17. | 3E-0125 | [1] | COVER AS-STARTING MOTOR | |
| 18. | 3E-0139 | [1] | HOUSING AS | |
| 19. | 3E-0136 | [1] | HOUSING AS | |
| 20. | 3E-0133 | [1] | WIRE AS-STARTING MOTOR | |
| 21. | 3E-0134 | [1] | COVER-PLUNGER | |
| 22. | 3E-0132 | [1] | CONNECTOR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 3E-0127 | [1] | KIT-BEARING | ||
| (INCLUDES BEARING,SEAL & BUSHING) | ||||
| 3E-0128 | [1] | KIT-BRUSH (24-VOLT) | ||
| (INCLUDES O-RINGS,SCREW, SPRING, BRUSH) | ||||
| 3E-0129 | [1] | KIT-HARDWARE (24-VOLT) | ||
| (INCLUDES BOLTS, NUTS,WASHERS, BUSHING) | ||||
| 3E-0130 | [1] | KIT-STARTING MOTOR SEAL (24-VOLT) | ||
| 3E-0131 | [1] | KIT-WASHER (24-VOLT) | ||
| 3E-0145 | [1] | KIT-STARTING MOTOR PIN (24-VOLT) | ||
| (INCLUDES RINGS & SHAFT) | ||||
| M | METRIC PART | |||
#SEBP22690501
9N-5454: STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS#SEBP22690502
9N-5455: STARTING MOTOR GP-ELECTRIC
9N-5455 STARTING MOTOR GP-ELECTRIC
S/N 9TL754-23814
12 VOLT
ALSO AN ATTACHMENT
S/N 9TL754-23814
12 VOLT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS#SEBP22690503
3N-7056: SUPPORT GP-BATTERY
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS#SEBP22690504
9L-4590: SWITCH AS-SOLENOID
9L-4590 SWITCH AS-SOLENOID
PROVIDES A SERIES PARALLEL SWITCH
FOR USE WITH 24 VOLT STARTING MOTORS
AN ATTACHMENT
PROVIDES A SERIES PARALLEL SWITCH
FOR USE WITH 24 VOLT STARTING MOTORS
AN ATTACHMENT
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY) | ||||
#SEBP22690505
143-6503: SWITCH GP-ENGINE BRAKE
143-6503 SWITCH GP-ENGINE BRAKE
PART OF 143-6499 CONTROL GP-ENGINE BRAKE
AN ATTACHMENT
PART OF 143-6499 CONTROL GP-ENGINE BRAKE
AN ATTACHMENT
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7E-4494 | [1] | ARM-ACTUATING | ||
| 2H-3755 | [2] | BOLT (5/16-18X0.43-IN) | ||
| 4M-5281 | [1] | BOLT (1/4-20X0.75-IN) | ||
| 8T-8908 | [1] | BOLT (1/4-20X1-IN) | ||
| 3B-4504 | [2] | LOCKWASHER | ||
| 3B-4505 | [2] | LOCKWASHER | ||
| 9S-8750 | [3] | NUT-FULL (1/4-20-THD) | ||
| 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) |
#SEBP22690506
7E-4335: SWITCH GP-ENGINE BRAKE
7E-4335 SWITCH GP-ENGINE BRAKE
PART OF 143-6499 CONTROL GP-ENGINE BRAKE, 102-8799, 175-2431 ENGINE BRAKE GP
ALSO AN ATTACHMENT
PART OF 143-6499 CONTROL GP-ENGINE BRAKE, 102-8799, 175-2431 ENGINE BRAKE GP
ALSO AN ATTACHMENT
For full view, you need register
#SEBP22690507
132-5404: VALVE GP-CONTROL
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-0273 | [1] | COVER | |
| 2. | 5S-6735 | [1] | GASKET | |
| 3. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 4. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 6. | 2N-1287 | [1] | ELBOW-FLARED | |
| 7. | 132-5418 | [1] | TUBE AS | |
| 8. | 1B-9575 | [2] | BOLT (5/16-18X1.56-IN) | |
| 9. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 2B-2404 | [2] | CLIP | |
| 11. | 030-7946 | [1] | ELBOW | |
| 12. | 3J-7354 | [1] | SEAL-O-RING | |
| 13. | 8B-2377 | [2] | BOLT (1/4-20X2-IN) | |
| 14. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 6T-5600 | [2] | BOSS | |
| 16. | 132-5419 | [1] | TUBE AS | |
| 17. | 4S-6399 | [1] | CONNECTOR | |
| 18. | 6K-1972 | [1] | ELBOW-FLARED | |
| 19. | 132-5420 | [1] | PLATE AS | |
| 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | ||
| 20. | 134-0638 | [1] | VALVE-RELAY |
#SEBP22690508
3L-6655: WIRING GP-ELECTRIC STARTING
3L-6655 WIRING GP-ELECTRIC STARTING -HEAT START
S/N 9TL1-23814
PART OF 9N-5454 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
S/N 9TL1-23814
PART OF 9N-5454 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1H-5166 | [2] | CLIP | ||
| 2L-9724 | [3] | CLIP-WIRE | ||
| 9F-9203 | [2] | CONNECTOR | ||
| 1L-9899 | [1] | MARKER | ||
| 8L-8413 | [6] | STRAP-CABLE (WHITE) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 4H-8310 | [1] | STRAP-CONNECTOR | ||
| 2L-8052 | [1] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| 2L-8054 | [2] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| 2L-8066 | [4] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8068 | [4] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 2L-8081 | [2] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 2L-8076 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 6N-2569 | [2] | TERMINAL (SNAP) | ||
| 4S-8784 D | WIRE-LIGHTING (NO.6)(1.2M) | |||
| 4S-8785 D | WIRE-LIGHTING (NO.10)(9M) | |||
| 4S-8787 D | WIRE-LIGHTING (NO.14)(12M) | |||
| D | ORDER BY THE METER | |||
#SEBP22690509
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your 3306C TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4P-8681 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILTER) | ||
| (INSTALL ON SPIN-ON OIL FILTER) | ||||
| 4P-6422 | [1] | FILM-WARNING (NO ETHER SPRAY/AIR INTAKE) | ||
| (INSTALL ON TOP OF VALVE COVER) | ||||
| 7W-9808 | [1] | FILM-INFORMATION (EPA) | ||
| (INSTALL ON RH SIDE OF ENGINE ON OUTBOARD SIDE OF GOVERNOR HOUSING DIRECTLY TO THE REAR OF FUEL PUMP HOUSING) | ||||
| 7E-2681 | [1] | PLATE-IDENTIFICATION (CATERPILLAR) | ||
| (INSTALL ON TOP OF VALVE COVER TOWARDS REAR OF ENGINE, READABLE FROM RH SIDE) | ||||
| 9L-6531 | [1] | PLATE-INFORMATION (ENGINE RATING) | ||
| (INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON TOP OF VALVE COVER DIRECTLY BEHIND THE BREATHER TOWARDS THE FRONT OF | ||||
| THE ENGINE, READABLE FROM RH SIDE) | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| (INSTALL ON CAST PAD ON UPPER LH SIDE OF BLOCK USING 4B4158 DRIVE SCREWS) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| (USE TO INSTALL SERIAL NUMBER PLATE) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| (USE TO INSTALL PRESTART TAG) | ||||
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART) | ||
| (INSTALL ON RH OR LH SIDE OF ENGINE IN A VISIBLE LOCATION. DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT.) | ||||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Truck Engine News
Engine News
Operation and Maintenance Manual
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Service Magazine
