112-9937 GOVERNOR GP-UNIT INJECTOR S/N 9GK11069-70157 PART OF 107-7727 GOVERNOR GP-UNIT INJECTOR Type 1 3116

112-9937: GOVERNOR GP-UNIT INJECTOR

112-9937 GOVERNOR GP-UNIT INJECTOR
S/N 9GK11069-70157
PART OF 107-7727 GOVERNOR GP-UNIT INJECTOR
Type 1

Parts for your 3116 TRUCK ENGINE:

Pos.	Part No	Qty	Parts name
1.	100-8271 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	110-6243	[1]	CAM AS
3.	7E-3829	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	103-1222	[1]	SPRING-FUEL RATIO CONTROL
7.	4P-5605	[4]	SHIM (0.5-MM THK)
	Y		SEPARATE ILLUSTRATION

112-9937: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

112-9937 GOVERNOR GP-UNIT INJECTOR
S/N 9GK11069-70157
PART OF 107-7727 GOVERNOR GP-UNIT INJECTOR
Type 2

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7326 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	100-4589	[1]	CAM AS
3.	7E-3829	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	103-1222	[1]	SPRING-FUEL RATIO CONTROL
7.	4P-5605	[4]	SHIM (0.5-MM THK)
	Y		SEPARATE ILLUSTRATION

119-3042: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

119-3042 GOVERNOR GP-UNIT INJECTOR
S/N 9GK38803-70157

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-4812 Y	[1]	FASTENER GP-FUEL INJ PUMP
119-3043 Y	[1]	GOVERNOR GP-UNIT INJECTOR
7W-8434 Y	[1]	LINES GP-GOVERNOR OIL
Y		SEPARATE ILLUSTRATION

119-3043: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

119-3043 GOVERNOR GP-UNIT INJECTOR
S/N 9GK38803-70157
PART OF 119-3042 GOVERNOR GP-UNIT INJECTOR
Type 1

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-8271 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	131-6467	[1]	CAM AS
3.	7E-3829	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	4P-6493	[1]	PLATE-INFORMATION (GOVERNOR)
7.	4P-5605	[4]	SHIM (0.5-MM THK)
8.	103-1222	[1]	SPRING-FUEL RATIO CONTROL
	Y		SEPARATE ILLUSTRATION

119-3043: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

119-3043 GOVERNOR GP-UNIT INJECTOR
S/N 9GK38803-70157
PART OF 119-3042 GOVERNOR GP-UNIT INJECTOR
Type 2

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7326 YC	[1]	GOVERNOR GP-UNIT INJECTOR
2.	131-6467	[1]	CAM AS
3.	7E-3829	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	4P-6493	[1]	PLATE-INFORMATION (GOVERNOR)
7.	4P-5605	[4]	SHIM (0.5-MM THK)
8.	103-1222	[1]	SPRING-FUEL RATIO CONTROL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

119-3043: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

119-3043 GOVERNOR GP-UNIT INJECTOR
S/N 9GK38803-70157
PART OF 119-3042 GOVERNOR GP-UNIT INJECTOR
Type 3

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7326 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	147-4639 C	[1]	CAM AS
3.	7E-3829	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	103-1222	[1]	SPRING-FUEL RATIO CONTROL
7.	4P-5605	[4]	SHIM (0.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

130-7326: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

130-7326 GOVERNOR GP-UNIT INJECTOR
S/N 9GK1-70157
PART OF 100-6256, 154-3700, 154-3701 GOVERNOR GP, 100-6254, 100-6258, 100-6260, 100-6262, 100-6274, 100-6276, 104-8681, 104-8685, 105-3706, 112-9936, 112-9937, 119-3043 GOVERNOR GP-UNIT INJECTOR

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	8T-0269 M	[1]	BOLT-SOCKET HEAD (M6X1X20-MM)
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING
31.	100-5740	[1]	SPRING-TORSION
32.	7C-5148	[1]	CARRIER-FLYWEIGHT
33.	2S-7316	[2]	DOWEL
34.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
35.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
36.	4P-8947	[1]	RISER
37.	4P-0737	[1]	SHAFT-RISER
38.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
39.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
40.	7L-3386	[1]	SEAL-O-RING
41.	7C-5884	[1]	COVER-OIL SUMP
42.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
43.	4P-4231	[1]	COVER-REAR
44.	6V-5100	[1]	SEAL-O-RING
45.	7C-5883 B	[7]	SHIM (0.25-MM THK)
46.	7W-5591	[1]	SEAT-GOVERNOR SPRING
47.	7C-3776	[1]	PISTON AS
	4N-6407	[1]	SPOOL-DASHPOT
	4N-6404	[1]	RING-RETAINING
48.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
49.	7W-8993	[2]	WEIGHT
50.	7C-5541	[2]	PLATE
51.	7W-1440 B	[8]	SHIM (0.12-MM THK)
52.	115-1192	[1]	SEAL-GOVERNOR HOUSING
53.	7C-2743	[2]	RACE
54.	7W-5561	[1]	BEARING-THRUST
55.	8C-5061	[1]	RING-RETAINING
56.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
57.	7C-5150	[1]	PIN
58.	117-9099	[1]	FLANGE
59.	9Y-1837	[1]	SPRING
60.	125-8158	[1]	SLEEVE-RACK CONTROL
61.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
62.	5P-9757	[1]	SEAL-O-RING
63.	109-4587	[1]	RING-TOLERANCE
64.	6D-9953	[1]	PIN-SPRING
65.	8T-1460	[2]	RING-RETAINING
66.	108-1612	[1]	CLEVIS
67.	7C-8854	[1]	PIN-CLEVIS
68.	108-1613	[1]	PISTON-SERVO
69.	8C-3312	[1]	RING-RETAINING
70.	114-2897	[1]	COVER-FUEL RATIO CONTROL
71.	7N-2171	[1]	RING-RETAINING
72.	7W-5324	[1]	BEARING
73.	115-2553	[1]	VALVE-GOVERNOR SERVO
74.	100-4390	[1]	SPRING
75.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
76.	129-4284	[1]	SEAT-SPRING
77.	6I-1564	[1]	DIAPHRAGM
78.	114-2899	[1]	RETAINER-DIAPHRAGM
79.	100-4392	[1]	SPRING-SERVO
80.	100-4394	[1]	SEAT-SPRING
81.	8N-5763	[1]	SEAL
82.	8N-5764	[1]	PISTON
83.	100-4393	[1]	SPRING-RETURN
84.	111-7221	[1]	VALVE AS
	8C-5899	[1]	PIN-SPRING
85.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
86.	100-5738 M	[1]	NUT (M6X0.5-THD)
87.	2M-9780	[2]	SEAL-O-RING
88.	128-4786	[2]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

6I-4267: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

6I-4267 GOVERNOR GP-UNIT INJECTOR
S/N 9GK1-1642
PART OF 100-6249 GOVERNOR GP-UNIT INJECTOR

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	108-1612	[1]	CLEVIS
3.	6D-9953	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	115-2553	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING
9.	108-1613	[1]	PISTON-SERVO
10.	125-8158	[1]	SLEEVE-RACK CONTROL
11.	9Y-1837	[1]	SPRING
12.	8T-7060	[1]	RING-RETAINING
13.	117-9098	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	114-1803	[1]	LEVER AS
19.	7W-5594	[1]	SHAFT AS-PIVOT
20.	8C-5899	[1]	PIN-SPRING
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	123-6433	[1]	ARBOR AS-TORQUE CAM
24.	5M-2057	[1]	SEAL-O-RING
25.	7E-3216	[1]	BLOCK AS-BEARING
26.	6F-5933	[2]	BEARING AS-NEEDLE
27.	7E-3217	[1]	LEVER AS
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	4P-3537	[1]	RING-TOLERANCE
33.	4P-3539	[1]	LEVER-THROTTLE
34.	8T-8895 M	[2]	SETSCREW-SOCKET (M4X0.7X16-MM)
35.	4W-6630	[1]	LEVER
36.	115-1192	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
38.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
39.	6I-4514	[1]	HOUSING AS
41.	7W-6104	[1]	PLUG
42.	8T-6702 M	[1]	SETSCREW-SOCKET (M5X0.8X20-MM)
43.	6V-8189	[1]	NUT (5/16-18-THD)
44.	7C-6204	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
48.	6V-5683 M	[1]	BOLT (M6X1X16-MM)
49.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
50.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
51.	7C-4483	[1]	SCREEN AS (OIL INLET)
52.	6V-5100	[1]	SEAL-O-RING
53.	4P-4231	[1]	COVER-REAR
54.	5C-2874 M	[2]	NUT (M5X0.8-THD)
55.	4W-6010	[1]	CLAMP
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
65.	7C-5541	[2]	PLATE
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM (0.12-MM THK)
71.	4P-8947	[1]	RISER
72.	4P-8948	[1]	SEAT AS-SPRING
74.	7C-3776	[1]	PISTON AS
75.	4N-6407	[1]	SPOOL-DASHPOT
76.	4N-6406	[1]	RING-SPACER
77.	4N-6404	[1]	RING-RETAINING
78.	7W-5591	[1]	SEAT-GOVERNOR SPRING
79.	7C-5883 B	[7]	SHIM (0.25-MM THK)
80.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
81.	4P-4000	[1]	SPRING-LEVER
82.	5C-8312 M	[1]	NUT (M4X0.7-THD)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

107-6823: LINES GP-FUEL

LINES GP-FUEL

107-6823 LINES GP-FUEL
S/N 9GK1-70157

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	030-8156	[2]	ELBOW
2.	3J-1907	[2]	SEAL-O-RING
3.	107-7593	[1]	TUBE AS
4.	107-7594	[1]	TUBE AS
5.	5C-7261 M	[2]	NUT (M8X1.25-THD)
6.	107-7599	[2]	STRAP AS
7.	6V-8214 M	[2]	BOLT (M6X1X20-MM)
8.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
9.	7E-2707	[2]	CLIP
10.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

107-6824: LINES GP-FUEL

LINES GP-FUEL

107-6824 LINES GP-FUEL
S/N 9GK1-70157
ALSO AN ATTACHMENT

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	030-8156	[2]	ELBOW
2.	3J-1907	[2]	SEAL-O-RING
3.	107-7595	[1]	TUBE AS
4.	107-7596	[1]	TUBE AS
5.	5C-7261 M	[2]	NUT (M8X1.25-THD)
6.	107-7599	[2]	STRAP AS
7.	6V-8214 M	[1]	BOLT (M6X1X20-MM)
8.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
9.	7E-2707	[2]	CLIP
10.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

Information:

FUEL SYSTEM

GOVERNOR GP

Truck Engine News

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01

Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23

Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30

New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30

Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30

Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30

Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30

Engine News

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13

Operation and Maintenance Manual

Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-Australia

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-CFEL

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-CSARL

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-Americas

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-Brazil

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Specifications

Governor
3116 Truck Engines

Service Letter-China

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Service Letter-Asia

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Information Release Memo

REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines

Testing and Adjusting

Governor - Adjust
3116 Truck Engine

Troubleshooting

Governor Instability
3114, 3116 and 3126 Engines

Disassembly and Assembly

Governor - Install
3116 On Highway Engines

Governor - Remove
3116 On Highway Engines

Service Magazine

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

Caterpillar Parts SIS Catalog 3116 :

Truck sale:

USD $14,000

1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts

USD $2,500

2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas

2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio

USD $22,500

1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania

USD $20,997

1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada