HYDRAULIC SYSTEM
VALVE GP-SOLENOIDIMPLEMENTS
CIRCLE GPDRAWBAR GP
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
#SEBP22740800
279-6528: VALVE GP-SOLENOID
279-6528 VALVE GP-SOLENOID
S/N 2ZK1-UP
24-VOLT
PART OF 112-2240 MANIFOLD GP-CONTROL
FIELD REPLACEMENT FOR @@@@@149-2610@@@@@, @@@@@149-2658@@@@@
S/N 2ZK1-UP
24-VOLT
PART OF 112-2240 MANIFOLD GP-CONTROL
FIELD REPLACEMENT FOR @@@@@149-2610@@@@@, @@@@@149-2658@@@@@
For full view, you need register
#SEBP22740801
6T-8046: VALVE GP-SOLENOID
6T-8046 VALVE GP-SOLENOID
S/N 2ZK1-UP
PART OF 7T-6517 MANIFOLD GP-CONTROL
FIELD REPLACEMENT ORDER @@@@@279-6528@@@@@, 1-216-0101 WIRE AS
AN ATTACHMENT
S/N 2ZK1-UP
PART OF 7T-6517 MANIFOLD GP-CONTROL
FIELD REPLACEMENT ORDER @@@@@279-6528@@@@@, 1-216-0101 WIRE AS
AN ATTACHMENT
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-8470 | [1] | COIL AS | |
| 2. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 3. | 1S-9593 | [2] | STRAP-CABLE | |
| 4. | 3G-8171 | [1] | CARTRIDGE-VALVE | |
| 5. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| 6. | 8T-8890 | [1] | WASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 3G-8175 | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES O-RINGS & BACK-UP RINGS) | ||||
#SEBP22740802
8T-8808: VALVE GP-SOLENOID
8T-8808 VALVE GP-SOLENOID
S/N 2ZK1-5317
CENTERSHIFT
PART OF 8X-7565 CONTROL GP-CENTERSHIFT LOCK, 142-8205 LOCK GP-CENTERSHIFT
FIELD REPLACEMENT ORDER @@@@@152-8351@@@@@
S/N 2ZK1-5317
CENTERSHIFT
PART OF 8X-7565 CONTROL GP-CENTERSHIFT LOCK, 142-8205 LOCK GP-CENTERSHIFT
FIELD REPLACEMENT ORDER @@@@@152-8351@@@@@
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-8500 | [1] | COIL AS | |
| 2. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 3. | 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | |
| 4. | 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | |
| 5. | 1S-9593 | [2] | STRAP-CABLE | |
| 6. | [1] | CARTRIDGE AS | ||
| 7. | 2D-6235 | [1] | LOCKNUT (1/4-20-THD) | |
| 8. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 3D-2824 | [1] | SEAL-O-RING | |
| 10. | 030-6121 | [1] | RING-BACKUP | |
| 11. | 7J-9108 | [1] | SEAL-O-RING | |
| 12. | 1H-1023 | [1] | SEAL-O-RING | |
| 13. | 5P-2199 | [1] | RING-BACKUP | |
| 14. | 7X-4776 | [1] | RING-BACKUP | |
| 15. | 4K-2039 | [1] | SEAL-O-RING | |
#SEBP22740803
112-7485: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-3971 | [1] | BRACKET AS | |
| 2. | 6G-2946 | [2] | STOP | |
| 3. | 132-2029 | [1] | BEAM-BLADE | |
| 4. | 8D-9883 | [1] | GUSSET | |
| 5. | 8D-9886 | [1] | BRACE | |
| 6. | 5T-3889 | [1] | BRACE | |
| 7. | 132-1340 | [1] | BRACE AS | |
| 2A-7089 | [2] | BUSHING | ||
| 8. | 5T-3890 | [1] | BRACE | |
| 9. | 4D-4375 | [2] | LUG | |
| 10. | 8D-9884 | [1] | GUSSET | |
| 11. | 8D-9882 | [2] | BLOCK-FILLER | |
| 12. | 132-2038 | [1] | BEAM-BLADE | |
| 13. | 8D-9887 | [1] | BRACE | |
| 5T-4267 AF | [1] | SEGMENT-CIRCLE | ||
| (4 TEETH, SERVICE REPAIR FOR WORN OR DAMAGED TEETH) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#SEBP22740804
112-7486: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-4139 | [8] | SPACER (18.85X26.67X78-MM THK) | |
| 2. | 7X-0550 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 3. | 112-5060 | [1] | BRACKET AS | |
| 104-8655 | [1] | BUSHING | ||
| 4. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 5. | 6G-2947 | [1] | SHAFT | |
| 6. | 5P-8245 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 6H-1717 | [30] | BOLT (1/2-13X1.125-IN) | |
| 8. | 8W-1749 | [10] | PLATE | |
| 9. | 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | |
| 10. | 3B-5320 | [2] | PIN-COTTER | |
| 11. | 112-5061 | [1] | BRACKET AS | |
| 104-8655 | [1] | BUSHING | ||
| 12. | 8W-5229 | [1] | GUARD | |
| 13. | 8W-5231 | [1] | GUARD | |
| 14. | 8W-1751 | [1] | BRACKET AS | |
| 15. | 8S-9092 | [2] | BOLT (5/8-11X2.25-IN) | |
| 16. | 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 17. | 1A-8537 | [2] | BOLT (5/8-11X2.75-IN) | |
| 18. | 5T-8367 | [1] | STRIP-WEAR | |
| 19. | 5T-8366 | [4] | STRIP-WEAR | |
| 20. | 5D-6644 | [10] | SHIM (0.762-MM THK) | |
| 21. | 7X-0452 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 22. | 7X-0334 | [8] | BOLT (1/2-13X5-IN) | |
| 23. | 105-2080 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 24. | 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | |
| 25. | 2G-3219 B | [5] | SHIM (0.8-MM THK) | |
| 26. | 2G-3221 B | [5] | SHIM (1.6-MM THK) | |
| 27. | 2K-0419 | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 28. | 112-7485 Y | [1] | CIRCLE GP | |
| 29. | 8D-5949 | [1] | BAR-SPREADER | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22740805
112-7486: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | |
| 2. | 2G-3219 B | [5] | SHIM (0.8-MM THK) | |
| 3. | 2G-3221 B | [5] | SHIM (1.6-MM THK) | |
| 4. | 2K-0419 | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 5. | 5D-6644 B | [10] | SHIM (0.762-MM THK) | |
| 6. | 5T-8366 | [4] | STRIP-WEAR | |
| 7. | 5T-8367 | [1] | STRIP-WEAR | |
| 8. | 8D-5949 | [1] | BAR-SPREADER | |
| 9. | 8W-1749 | [10] | PLATE | |
| 10. | 8W-5229 | [1] | GUARD | |
| 11. | 8W-5231 | [1] | GUARD | |
| 12. | 102-4139 | [8] | SPACER (18.85X26.67X78-MM THK) | |
| 13. | 153-3580 C | [1] | SHAFT | |
| 14. | 153-9360 CY | [1] | CIRCLE GP | |
| 15. | 105-2080 | [4] | BRACKET AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 16. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 17. | 3B-5320 | [2] | PIN-COTTER | |
| 18. | 5P-8245 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 6H-1717 | [30] | BOLT (1/2-13X1.125-IN) | |
| 20. | 7X-0334 | [8] | BOLT (1/2-13X5-IN) | |
| 21. | 7X-0452 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 22. | 7X-0550 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 23. | 8W-1751 | [1] | BRACKET AS | |
| 23A. | 9X-8881 | [2] | BOLT (5/8-11X2.25-IN) | |
| 23B. | 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 23C. | 9X-8883 | [2] | BOLT (5/8-11X2.75-IN) | |
| 23D. | 9D-8285 | [1] | CAP | |
| 24. | 112-5060 | [1] | BRACKET AS (RH) | |
| 104-8655 | BUSHING | |||
| 25. | 112-5061 | [1] | BRACKET AS (LH) | |
| 104-8655 | BUSHING | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22740806
112-7486: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | |
| 2. | 2G-3219 B | [4] | SHIM (0.8-MM THK) | |
| 3. | 2G-3221 B | [4] | SHIM (1.6-MM THK) | |
| 4. | 2K-0419 | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 5. | 5D-6644 | [10] | SHIM (0.762-MM THK) | |
| 6. | 5T-8366 | [4] | STRIP-WEAR | |
| 7. | 8D-5949 | [1] | BAR-SPREADER | |
| 8. | 8W-1749 | [10] | PLATE | |
| 9. | 102-4139 B | [8] | SPACER (18.85X26.67X78-MM THK) | |
| 10. | 112-5060 | [1] | BRACKET AS | |
| 104-8655 | [1] | BUSHING | ||
| 11. | 112-5061 | [1] | BRACKET AS | |
| 104-8655 | [1] | BUSHING | ||
| 12. | 153-3580 C | [1] | SHAFT | |
| 13. | 153-9360 CY | [1] | CIRCLE GP | |
| 14. | 159-8127 | [1] | BRACKET AS | |
| 14A. | 9X-8881 | [2] | BOLT (5/8-11X2.25-IN) | |
| 14B. | 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14C. | 9X-8883 | [2] | BOLT (5/8-11X2.75-IN) | |
| 15. | 163-4720 | [1] | GUARD | |
| 16. | 163-4721 | [1] | GUARD | |
| 17. | 163-6074 B | [2] | SHIM (0.381-MM THK) | |
| 18. | 178-1685 | [1] | STRIP-WEAR | |
| 19. | 178-1686 B | [1] | SHIM (0.8-MM THK) | |
| 20. | 178-1688 B | [1] | SHIM (1.8-MM THK) | |
| 21. | 178-8455 B | [1] | SHIM (0.4-MM THK) | |
| 22. | 105-2080 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 22A. | 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | |
| 23. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 24. | 3B-5320 | [2] | PIN-COTTER | |
| 25. | 5P-8245 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 6H-1717 | [30] | BOLT (1/2-13X1.125-IN) | |
| 27. | 7X-0334 | [8] | BOLT (1/2-13X5-IN) | |
| 28. | 7X-0452 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 29. | 7X-0550 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22740807
153-9360: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-3971 | [1] | BRACKET AS | |
| 2. | 4D-4375 | [2] | LUG | |
| 3. | 5T-3889 | [1] | BRACE | |
| 4. | 5T-3890 | [1] | BRACE | |
| 5. | 6G-2946 | [2] | STOP | |
| 7. | 8D-9882 | [2] | BLOCK-FILLER | |
| 8. | 8D-9886 | [1] | BRACE | |
| 9. | 8D-9887 | [1] | BRACE | |
| 10. | 153-0187 | [1] | BEAM-BLADE | |
| 11. | 2A-7089 | [2] | BUSHING | |
| 12. | 153-0185 | [1] | BEAM-BLADE | |
| 5T-4267 AF | SEGMENT-CIRCLE | |||
| (4 TEETH) SERVICE REPAIR FOR WORN OR DAMAGED TEETH | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#SEBP22740808
153-9360: CIRCLE GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-3971 | [1] | BRACKET AS | |
| 2. | 4D-4375 | [2] | LUG | |
| 3. | 5T-3889 | [1] | BRACE | |
| 4. | 5T-3890 | [1] | BRACE | |
| 5. | 6G-2946 | [2] | STOP | |
| 6. | 153-0185 | [1] | BEAM-BLADE | |
| 7. | 8D-9882 | [2] | BLOCK-FILLER | |
| 8. | 8D-9886 | [1] | BRACE | |
| 9. | 8D-9887 | [1] | BRACE | |
| 10. | 153-0187 | [1] | BEAM-BLADE | |
| 5T-4267 AF | SEGMENT-CIRCLE | |||
| (4 TEETH) SERVICE REPAIR FOR WORN OR DAMAGED TEETH | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#SEBP22740809
8X-1960: DRAWBAR GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-1322 | [4] | BOLT (7/8-9X6-IN) | |
| 2. | 6G-1915 B | [36] | SHIM (0.25-MM THK) | |
| 3. | 8X-7951 | [1] | DRAWBAR & YOKE AS | |
| 3A. | 5T-6775 | [2] | REINFORCEMENT | |
| 3B. | 178-3086 | [3] | STUD-BALL | |
| 3C. | 8X-7956 | [1] | SHAFT AS | |
| 3D. | 8F-9836 | [12] | BOSS (3/8-16-THD) | |
| 3E. | 123-7707 | [2] | PLATE | |
| 4. | 6G-5442 | [1] | BALL | |
| 5. | 8X-8406 | [1] | CAP | |
| 6. | 8X-8409 B | [4] | SHIM (0.8-MM THK) | |
| 7. | 8X-8408 B | [6] | SHIM (0.25-MM THK) | |
| 8. | 8X-8407 | [1] | ADAPTER | |
| 9. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 10. | 2H-3764 | [2] | BOLT-SOCKET HEAD (1/4-20X1.5-IN) | |
| 11. | 9H-1031 | [4] | WASHER-HARD (24X41.5X6-MM THK) | |
| 12. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(DRAWBAR) | |
| 13. | 319-2228 | [6] | SHOE-CIRCLE GUIDE | |
| 14. | 4B-3604 | [12] | SETSCREW-SQUARE HEAD (3/4-10X2.5-IN) | |
| 15. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 16. | 6G-1914 B | [54] | SHIM (0.76-MM THK) | |
| 17. | 128-9654 | [11] | STRIP-WEAR | |
| 18. | 333-0960 | [6] | STRIP-WEAR | |
| 19. | 5P-6652 | [18] | WASHER (20X44.5X6-MM THK) | |
| 20. | 3B-6753 | [18] | BOLT (3/4-10X4.75-IN) | |
| 21. | 153-7383 B | [1] | SHIM (0.12-MM THK) | |
| B | USE AS REQUIRED | |||
