OPERATOR STATION
CONTROL GPCONTROL GP-STEERING
CONVERSION GP
DOOR GP
OPERATOR STATION
CONTROL GP
#SEBP22740840
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 2ZK948-2618
PART OF 8W-6221 CHASSIS AR
S/N 2ZK948-2618
PART OF 8W-6221 CHASSIS AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 8X-2498 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 145-9077 | [1] | ROD | |
| 18. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3K-8280 | [1] | PIN-CLEVIS | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 9X-5694 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [3] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 3D-4004 | [1] | SEAL-QUAD RING | |
| 31. | 133-9185 | [1] | ADAPTER | |
| 32. | 7M-8485 | [1] | SEAL-O-RING | |
| 33. | 7D-9212 | [1] | SPRING | |
| 34. | 6P-5442 | [2] | PLUG | |
| 35. | 136-5160 | [1] | COUPLER | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 8X-7665 | [1] | BRACKET | |
| 40. | 1D-1313 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 6J-1889 | [1] | SEAL-U-CUP | |
| 44. | 9J-8783 B | [1] | SHIM (0.508-MM THK) | |
| 45. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP22740841
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 2ZK2619-4840
PART OF 8W-6221 CHASSIS AR
S/N 2ZK2619-4840
PART OF 8W-6221 CHASSIS AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 8X-2498 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 145-9077 | [1] | ROD | |
| 18. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 | [1] | SEAL-O-RING | |
| 31. | 9X-6578 | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 | [1] | BRACKET | |
| 40. | 149-2065 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 B | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| B | USE AS REQUIRED | |||
#SEBP22740842
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 2ZK4841-6902
PART OF 8W-6221 CHASSIS AR
S/N 2ZK4841-6902
PART OF 8W-6221 CHASSIS AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 8X-2498 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 169-0922 C | [1] | ROD | |
| 18. | 4J-8922 C | [1] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 C | [1] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 | [1] | SEAL-O-RING | |
| 31. | 9X-6578 | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 | [1] | BRACKET | |
| 40. | 149-2065 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 B | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| 46. | 169-0921 C | [1] | ROD END (3/8-24 LH-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP22740843
129-8215: CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 2ZK6903-UP
PART OF 8W-6221 CHASSIS AR
S/N 2ZK6903-UP
PART OF 8W-6221 CHASSIS AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 207-4922 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 169-0922 C | [1] | ROD | |
| 18. | 4J-8922 C | [1] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 C | [1] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3H-8538 | [1] | PIN | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 144-5323 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [2] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 5D-6539 | [1] | SEAL-O-RING | |
| 31. | 9X-6578 | [1] | NUT-FACE SEAL (1-11/16-12-THD) | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 147-7238 | [1] | BRACKET | |
| 40. | 149-2065 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 43. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 45. | 9G-9154 | [1] | CLIP | |
| 46. | 169-0921 C | [1] | ROD END (3/8-24 LH-THD) | |
| 47. | 1V-6341 | [1] | SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP22740844
8W-5618: CONTROL GP-CLUTCH
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 7K-2135 | [1] | BEARING-ROLLER | |
| 3. | 4J-2667 | [1] | BEARING AS-NEEDLE | |
| 4. | 9D-0145 | [1] | LEVER | |
| 5. | 8X-3805 | [1] | SHAFT | |
| 6. | 1B-8704 | [2] | KEY-WOODRUFF | |
| 7. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| 8. | 4D-4895 | [1] | LEVER | |
| 9. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 10. | 6V-8801 | [3] | NUT (3/8-16-THD) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 8X-2497 | [1] | LEVER | |
| 14. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 15. | 8X-2498 | [1] | PEDAL-CLUTCH | |
| 16. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 17. | 8G-7629 | [1] | ROD | |
| 18. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 19. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [1] | PIN | |
| 21. | 3K-8280 | [1] | PIN-CLEVIS | |
| 22. | 7V-0446 | [2] | CLIP | |
| 23. | 9X-5694 | [1] | CABLE AS | |
| 8C-0620 | [2] | PROTECTOR-THREAD | ||
| 24. | 5P-7704 | [1] | ROD END | |
| 25. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 26. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 27. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 9S-1354 | [3] | NUT (5/8-18-THD) | |
| 29. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 3D-4004 | [1] | SEAL-QUAD RING | |
| 31. | 133-9185 | [1] | ADAPTER | |
| 32. | 7M-8485 | [1] | SEAL-O-RING | |
| 33. | 7D-9212 | [1] | SPRING | |
| 34. | 6P-5442 | [2] | PLUG | |
| 35. | 133-9186 | [1] | COUPLER | |
| 36. | 8D-9974 | [1] | GASKET | |
| 37. | 8D-9969 | [1] | COVER | |
| 38. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 39. | 8X-7665 | [1] | BRACKET | |
| 40. | 1D-1313 | [1] | SPRING | |
| 41. | 8W-8909 | [3] | SLEEVE | |
| 42. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 43. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 44. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 45. | 6J-1889 | [1] | SEAL-U-CUP |
#SEBP22740845
7I-4718: CONTROL GP-STEERING
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP22740846
7I-4718: CONTROL GP-STEERING
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-3769 J | [1] | PUMP GP-METERING (HMU) | |
| 2. | 384-5820 | [1] | WHEEL AS | |
| 3. | 144-6695 | [1] | NUT (13/16-20-THD) | |
| 4. | 118-9573 M | [4] | BOLT-12 POINT HEAD (M10X1.5X35-MM) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 257-8471 J | [1] | KIT-SEAL (HMU) | ||
| (KIT INCLUDES SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP22740847
8W-7630: CONVERSION AR-NON-ROPS
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP22740848
8X-4153: CONVERSION AR-NON-ROPS
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8X-4154 Y | [1] | GUARD GP-PLATFORM | ||
| 5P-8502 | [1] | PADLOCK GP | ||
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 122-9575 Y | [1] | PANEL GP-CAB (INSTRUMENT) | ||
| 8Y-4951 Y | [1] | SEAT GP-SUSPENSION | ||
| 3V-4694 | [1] | PLUG-BUTTON | ||
| 9D-3767 | [1] | PLUG-BUTTON | ||
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP22740849
266-7031: DOOR GP-CAB
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-3915 B | [4] | SHIM (1.52-MM THK) | |
| 2. | 5T-7486 | [1] | RETAINER-SPRING | |
| 3. | 6D-6581 | [14] | RIVET-POP | |
| 4. | 6V-2773 | [2] | PLUG | |
| 5. | 6V-7636 | [4] | PIN AS-SPRING | |
| 6. | 8X-4066 | [1] | HINGE | |
| 8. | 8X-4262 | [1] | COVER (RH) | |
| 11. | 8Y-4398 | [1] | LINK-CONNECTING | |
| 12. | 8Y-4620 | [1] | LINK-CONNECTING | |
| 13. | 8Y-4801 | [1] | LOCK AS-CYLINDER | |
| 226-0295 | [1] | LOCK AS | ||
| 226-0342 | [1] | CAM | ||
| 14. | 8Y-6385 | [1] | SHIELD-STRIKER | |
| 15. | 9X-2546 M | [4] | BOLT (M6X1X20-MM) | |
| 16. | 106-6553 | [2] | BUMPER-CONICAL | |
| 17. | 107-9641 | [1] | PLATE AS | |
| 18. | 108-5950 | [1] | LATCH AS | |
| 19. | 108-5952 | [1] | LINK (RH) | |
| 20. | 114-9190 | [1] | SEAL | |
| 21. | 117-1963 | [1] | PLATE AS | |
| 22. | 128-0037 | [1] | KNOB-BALL | |
| 23. | 199-2677 | [1] | LINK (RELEASE) | |
| 24. | 199-2712 | [1] | HANDLE | |
| 25. | 282-8470 | [1] | DOOR AS-ACCESS (RH) | |
| 6V-9632 M | [10] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 282-9436 | [1] | SPACER | |
| 27. | 282-9437 | [1] | PLATE | |
| 28. | 8Y-4400 | [1] | LATCH AS-DOOR | |
| 29. | 296-4298 | [1] | HANDLE AS-DOOR (OUTSIDE) | |
| 30. | 296-4303 | [1] | HANDLE AS-DOOR (INSIDE) | |
| 31. | 1H-3338 | [1] | LOCKWASHER | |
| 32. | 230-8993 M | [2] | SCREW-FLAT HEAD (M6X1X12-MM) | |
| 33. | 321-5918 | [1] | PLUG-BUTTON | |
| 34. | 8C-8454 M | [14] | SCREW-MACHINE (M6X1X20-MM) | |
| 35. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 36. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 37. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4157 | [1] | STRIKER AS | |
| 8T-4158 | [1] | WASHER-SPECIAL | ||
| 39. | 8T-4181 M | [6] | BOLT (M6X1X20-MM) | |
| 40. | 8X-4245 M | [1] | BOSS (M6X1X18-MM) | |
| 41. | 9X-2042 M | [7] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 42. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 43. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 44. | 5P-5969 D | SEAL (1.5-M) | ||
| 45. | 5P-5768 D | SEAL (2.4-M) | ||
| 45A. | 5P-5768 D | SEAL (2.8-M) | ||
| 46. | 122-2228 E | SEAL (172-CM) | ||
| 47. | 178-8894 E | SEAL (340-CM) | ||
| 48. | 308-2025 | [1] | COVER (RH) | |
| 49. | 308-7592 | [1] | GLASS | |
| 50. | 308-7593 | [1] | GLASS | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
