AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8X-1935 LIFT GP-BLADE S/N 2ZK1-UP PART OF 8W-6219 BLADE AR 140H NA MOTOR GRADER


WORK TOOLS
BLADE GP
RIPPER GP
SCARIFIER GP

MOTOR GRADER 140H NA MOTOR GRADER 2ZK
 140H NA Motor Grader 2ZK00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2274 140H NA 2ZK   (1995)

WORK TOOLS

BLADE GP
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
148-0657 LIFT GP-BLADE
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE
 

#SEBP22741040
 

8X-1935: LIFT GP-BLADE

8X-1935 LIFT GP-BLADE
S/N 2ZK1-UP
PART OF 8W-6219 BLADE AR
i00122636 SEBP2274
8X1935 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
3. 7D-8891 [2] RETAINER  
4. 8X-3616 [1] ARM AS (RH)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 8D-8168 [1] BEARING (63.65-MM ID)  
7. 2J-3506 [6] NUT-FULL (3/4-10-THD)  
  3B-6753 [6] BOLT (3/4-10X4.75-IN)  
8. 5P-8248 [16] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 8X-5106 [1] STUD-BALL  
10. 8D-4332 [2] PIN  
11. 8X-5110 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
12. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
13. 8X-5109 [1] BAR AS  
14. 8X-5108 [2] BUSHING  
15. 124-5836 [5] BUSHING  
16. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
17. 9D-3583 [2] LOCK  
18. 7H-2444 [2] SEAL-O-RING  
19. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
20. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
21. 7D-8879 B [8] SHIM (0.127-MM THK)  
22. 7D-8881 B [6] SHIM (0.254-MM THK)  
23. 7D-8882 B [2] SHIM (0.508-MM THK)  
24. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
25. 5F-0149 [2] SEAL-O-RING  
26. 7D-8883 [2] SEAL  
27. 8X-5107 [1] PIN  
28. 3P-1461 [4] SEAL-LIP TYPE  
29. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
30. 8X-5111 [2] LOCK  
31. 7D-8884 [2] SEAL  
32. 8X-3615 [1] ARM AS (LH)  
  8D-8168 [1] BEARING (63.65-MM ID)  
  7D-8889 [1] BEARING (76.35-MM ID)  
33. 124-0435 [1] PLATE  
34. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
35. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22741041
 

9W-7467: MOUNTING GP-RIPPER

9W-7467 MOUNTING GP-RIPPER
S/N 2ZK1-UP
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i00122900 SEBP2274
9W7467 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7438 [1] PLATE AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  104-4522 [2] PLATE  
2. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
3. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
4. 9W-7470 [2] PIN  
5. 7X-0403 [10] BOLT (1-8X2.25-IN)  
6. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
7. 109-6776 [2] PIN  
8. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 3W-7256 [2] SPACER (47X80X16-MM THK)(16MM THK)  
11. 3W-7254 [2] SPACER (47X80X20-MM THK)(20MM THK)  
12. 9W-7469 [2] PIN  
13. 104-4523 [2] CAM AS  
14. 8E-6130 [2] LINK AS  
  2K-4233 [2] BOSS  
15. 6P-5647 [2] BOSS  
 

#SEBP22741042
 

9W-7603: RIPPER AR

9W-7603 RIPPER AR
S/N 2ZK1-UP
AN ATTACHMENT
i00122901 SEBP2274
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-7754 Y [1] CYLINDER GP-RIPPER  
  109-7027 Y [1] LINES GP-RIPPER  
  [1] LITERATURE GP  
  9W-7467 Y [1] MOUNTING GP-RIPPER  
  8J-7024 Y [1] RIPPER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741043
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 2ZK1-4303
3-TEETH
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i00122459 SEBP2274
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
2. 4K-3150 [2] PIN  
3. 9J-0095 [1] LINK AS-LOWER  
4. 3G-2579 [4] BEARING  
6. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
7. 7L-6363 [2] MARKER  
8. 8J-7008 [2] PIN  
9. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  2K-4973 [2] LOCKNUT (3/8-16-THD)  
10. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARINGS)  
11. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
12. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
13. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
14. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
15. 3G-2581 [2] BEARING  
16. 7K-9203 [8] SEAL-LIP TYPE  
17. 2D-0626 [8] SEAL  
18. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
19. 2K-0120 [1] PIN  
20. 5P-2228 [2] BOLT (1/2-13X1-IN)  
21. 2K-0703 [1] BAR  
22. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741044
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 2ZK4304-5155
3-TEETH
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i01473868 SEBP2274
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 7L-6363 [2] MARKER  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
11. 172-5454 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741045
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N 2ZK5156-UP
3-TEETH
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i01473128 SEBP2274
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
11. 187-0953 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741046
 

108-1104: SCARIFIER AR

108-1104 SCARIFIER AR -VEE TYPE
S/N 2ZK1-UP
AN ATTACHMENT
i00123088 SEBP2274
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  116-0379 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  8X-6070 Y [1] LINES GP-HYDRAULIC (SCARIFIER)  
  8X-6080 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741047
 

113-0704: SCARIFIER AR

113-0704 SCARIFIER AR -STRAIGHT
S/N 2ZK1-UP
AN ATTACHMENT
i00123286 SEBP2274
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  116-0379 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  8X-6070 Y [1] LINES GP-HYDRAULIC (SCARIFIER)  
  111-3883 Y [1] SCARIFIER GP (STRAIGHT TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22741048
 

111-3883: SCARIFIER GP

111-3883 SCARIFIER GP -STRAIGHT TYPE
S/N 2ZK1-UP
PART OF 113-0704 SCARIFIER AR
AN ATTACHMENT
i00123168 SEBP2274
1113883 SCARIFIER GP Parts scheme 1113883 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0224 [2] BOLT (7/8-14X3.5-IN)  
2. 1B-4208 [2] NUT-FULL (7/8-14-THD)  
3. 2G-7149 [1] BLOCK AS  
4. 2H-3746 [4] BOLT (1-14X5-IN)  
5. 2K-7471 [4] LOCKNUT (1-14-THD)  
6. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
7. 3D-4904 [4] LOCKNUT (1-1/8-12-THD)  
8. 4D-6086 [2] KEY  
9. 5B-0577 [2] COLLAR  
10. 5D-8159 [2] PIN AS  
11. 5K-1458 [17] GROMMET  
12. 5K-1459 [17] LOCK PIN  
13. 6B-3260 [1] TOOL  
14. 6F-6992 [4] CAP-BALL SOCKET  
15. 6Y-5230 [17] TOOTH-SCARIFIER  
16. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
17. 7F-1327 B [32] SHIM (0.03-IN THK)  
18. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
19. 8H-4040 [4] BOLT (1-1/8-12X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
25. 118-7881 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
26. 195-7219 [17] SHANK  
27. 198-9811 B [4] SPACER (83X145X3-MM THK)  
28. 198-9812 B [2] SPACER (83X145X2-MM THK)  
29. 1A-8063 [8] BOLT (3/4-10X2.5-IN)  
30. 1D-4612 [4] BOLT (3/4-10X4-IN)  
31. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
34. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 5P-8250 [8] WASHER (28X49X5-MM THK)  
39. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 8X-3663 [8] WASHER (20X45X12-MM THK)  
43. 9X-8875 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP22741049
 

212-6231: SCARIFIER GP

212-6231 SCARIFIER GP
S/N 2ZK1-UP
11-TEETH
CANNOT BE USED WITH @@@@@212-6232@@@@@
AN ATTACHMENT
i02232484 SEBP2274
2126231 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 140H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1458 [11] GROMMET  
2. 5K-1459 [11] LOCK PIN  
3. 6Y-5230 [11] TOOTH-SCARIFIER  
4. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
5. 195-7218 [11] SHANK  
6. 212-6279 [1] SCARIFIER AS  
 

Information:

Caterpillar Parts SIS Catalog 140H NA :

148-0657 LIFT GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
524-8606 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
195-7267 EDGE GP-CUTTING
195-7266 EDGE GP-CUTTING
MOUNTING GP-RIPPER
9W-7467 MOUNTING GP-RIPPER
9W-7603 RIPPER AR
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
108-1104 SCARIFIER AR
113-0704 SCARIFIER AR
SCARIFIER GP
111-3883 SCARIFIER GP

Truck sale:

 
62,500 
Caterpillar 140HNA, Construction
- motor graders

Caterpillar 140HNA, Construction
115,000 
Caterpillar 140HNA, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 140HNA, Construction
75,000 
Caterpillar 140HNA, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140HNA, Construction
95,000 
Caterpillar 140HNA, Construction
- motor graders
NMC
Caterpillar 140HNA, Construction
120,000 
Caterpillar 140HNA, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.