AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

103-8519 CONDENSER GP-REFRIGERANT S/N 9EJ1-UP PART OF 8X-7992 CONDENSER & MTG GP-REFRIGERANT Type 1 AN ATTACHMENT 160H NA


OPERATOR STATION
AIR CONDITIONER GP
CONSOLE GP
CONTROL GP

MOTOR GRADER 160H NA MOTOR GRADER 9EJ
 160H Motor Grader 9EJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2276 160H NA 9EJ   (1994)

OPERATOR STATION

AIR CONDITIONER GP
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8X-7992 CONDENSER & MTG GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
103-8519 CONDENSER GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
103-8519 CONDENSER GP-REFRIGERANT
LINES GP-AIR CONDITIONER
7I-5016 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
8W-6899 LINES GP-AIR CONDITIONER
 

#SEBP22760790
 

103-8519: CONDENSER GP-REFRIGERANT

103-8519 CONDENSER GP-REFRIGERANT
S/N 9EJ1-UP
PART OF 8X-7992 CONDENSER & MTG GP-REFRIGERANT
Type 1
AN ATTACHMENT
i00122955 SEBP2276
1038519 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-3451 [1] CASE AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  9G-9151 [3] CLIP  
  8T-5413 M [2] STUD-WELD (M10X1.5X25-MM)  
  8T-3994 M [2] STUD-WELD (M6X1-THD)  
2. 7T-1099 [6] LINK  
3. 8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
4. 8T-3597 M [12] NUT-WELD (M12X1.75-THD)  
5. 5C-2890 M [1] NUT (M6X1-THD)  
6. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 7X-6279 J [2] MOTOR AS  
    (EACH INCLUDES)
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
8. 142-8620 [2] FAN AS-CONDENSER (4-BLADE)  
9. 3E-5239 [1] RELAY AS (24-VOLT)(CONDENSER FAN MOTOR)  
10. 123-8330 [1] HARNESS AS-HEATER & AIR COND  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
11. 5P-9085 [2] CLIP (LOOP)  
12. 2L-1224 [1] CAP-SEAL (HIGH SIDE)(7/16 X 20 THD)  
13. 9X-3439 [1] COIL-CONDENSER  
14. 127-9083 [2] PLATE  
15. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 5P-8438 [1] GROMMET  
18. 7T-5868 [4] CLAMP AS  
19. 3S-2093 [7] STRAP-CABLE  
20. 9X-4292 [4] TUBE  
21. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 2D-2751 [1] GROMMET  
23. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
24. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
25. 6T-6962 [1] WIRE AS  
26. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
27. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
28. 9X-3452 [2] GUARD AS-FAN  
29. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
30. 5P-5673 BD SEAL  
31. 5P-5924 BD SEAL  
   
    AVAILABLE REPAIR KIT(S):
  9G-0398 J [1] KIT-MOTOR BRUSH (CONDENSER FAN MOTOR)  
    (INCLUDES BRUSHES & BRUSH CAPS)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP22760791
 

103-8519: CONDENSER GP-REFRIGERANT

103-8519 CONDENSER GP-REFRIGERANT
S/N 9EJ1-UP
PART OF 8X-7992 CONDENSER & MTG GP-REFRIGERANT
Type 2
AN ATTACHMENT
i01093370 SEBP2276
1038519 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(AIR CONDITIONER)  
2. 3S-2093 [7] STRAP-CABLE  
3. 7T-5856 [4] CLAMP  
4. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
5. 8P-6363 [1] PLUG  
6. 9X-3452 [2] GUARD AS-FAN  
7. 142-8620 [2] FAN AS-CONDENSER (4-BLADE)  
8. 168-7932 [1] HARNESS AS-HEATER & AIR COND  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
9. 201-5688 [1] WIRE AS  
10. 203-2070 [8] MOUNT  
11. 204-9530 [4] TUBE  
12. 204-9531 [1] COIL-CONDENSER  
13. 204-9532 [1] CASE AS  
14. 308-6335 [2] MOTOR GP-ELECTRIC (AIR CONDITIONER)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
15. 5C-2890 M [1] NUT (M6X1-THD)  
16. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
17. 5P-8441 [1] GROMMET  
18. 5P-9085 [2] CLIP (LOOP)  
19. 7X-0578 [4] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [4] NUT (M10X1.5-THD)  
22. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
23. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
24. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
27. 9X-7373 [1] GROMMET  
28. 5P-5924 D SEAL (0.1-M EACH)  
29. 5P-5672 D SEAL (0.6-M EACH)  
30. 5P-5908 D SEAL (.5-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP22760792
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 9EJ1-599
PART OF 8W-6228 CHASSIS AR
i00122525 SEBP2276
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
3. 188-1171 [1] PLATE AS  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
4. 7M-0706 [1] KNOB (SHIFTER)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 253-4019 [1] CONTROL-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER  
14. 105-8681 [1] GATE AS  
  M   METRIC PART
 

#SEBP22760793
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 9EJ600-1253
PART OF 8W-6228 CHASSIS AR
i00875197 SEBP2276
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M NUT-WELD (M6X1-THD)  
3. 198-7654 [1] PLATE AS  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 161-1343 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (PANEL SHIFT COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB (SHIFTER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22760794
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 9EJ1254-UP
PART OF 8W-6228 CHASSIS AR
i01748413 SEBP2276
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
3. 198-7654 [1] PLATE AS  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 180-3531 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (SHIFT PANEL COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22760795
 

8X-2330: CONSOLE GP-OPERATOR

8X-2330 CONSOLE GP-OPERATOR
S/N 9EJ1-UP
PART OF 8W-6228 CHASSIS AR
i00122657 SEBP2276
8X2330 CONSOLE GP-OPERATOR Parts scheme 8X2330 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3676 [1] BASE  
2. 8X-1917 [1] CHANNEL AS  
3. 034-1994 [1] PIN  
4. 3B-4607 [2] PIN-COTTER  
5. 236-0737 [1] CYLINDER  
6. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
7. 8X-1921 [1] HOOD  
8. 8X-3789 [1] PANEL  
9. 2A-7184 [2] PLATE  
10. 8C-3442 [1] SPRING-COIL  
11. 2K-7979 [13] BUSHING  
12. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 169-3679 [1] CHANNEL AS  
14. 8X-1908 [1] PANEL  
15. 8X-1911 [1] PANEL  
16. 8X-2160 [1] LEVER (STEERING WHEEL TILT CONTROL)  
17. 8X-3951 [1] PANEL  
18. 5M-8500 [1] KNOB (STEERING WHEEL TILT CONTROL)  
19. 123-1201 [1] PLATE (LH)  
20. 8D-7960 [2] PLATE  
21. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 3Y-2806 [1] SPRING  
24. 8X-1904 [1] SPACER (20X35X26-MM THK)  
25. 6G-8814 [2] BRACKET  
26. 8X-1907 [1] SHAFT  
27. 160-8503 M [3] NUT (M10X1.5-THD)  
28. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
29. 2G-8572 [8] WASHER-SPECIAL  
30. 2G-8573 [8] CAP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 8X-5123 [1] RETAINER  
33. 8X-2161 [1] LEVER (STEERING COLUMN TILT)  
34. 9M-5590 [1] BALL  
35. 5C-8312 M [6] NUT (M4X0.7-THD)  
36. 110-6241 [1] BRACKET  
37. 206-4097 [8] FASTENER  
38. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
39. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
40. 174-8131 M [16] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
41. 8X-2893 M [10] NUT (M4X0.7-THD)  
42. 031-2666 [1] ROD  
43. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
44. 8X-1914 [1] SHAFT  
46. 2K-5830 [2] BEARING AS-NEEDLE  
47. 206-9651 [1] PLATE (RH)  
48. 4L-6454 [4] BOLT (3/8-16X1-IN)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 8X-3965 [1] RATCHET  
51. 3F-7514 [4] PIN  
52. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
53. 4B-4314 [1] RIVET  
54. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
55. 6G-2914 [1] LATCH  
56. 7I-4890 [1] PLATE AS  
57. 8L-7905 [2] RIVET-POP  
58. 8D-5641 B [14] BEARING  
59. 8T-1174 [4] SEAL-LIP TYPE  
60. 5P-5637 BD SEAL  
61. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
62. 5P-5639 BD SEAL  
63. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP22760796
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 9EJ291-532
PART OF 8W-6228 CHASSIS AR
i00123824 SEBP2276
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 136-5160 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 6J-1889 [1] SEAL-U-CUP  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22760797
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 9EJ533-814
PART OF 8W-6228 CHASSIS AR
i01091518 SEBP2276
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
  B   USE AS REQUIRED
 

#SEBP22760798
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 9EJ815-1155
PART OF 8W-6228 CHASSIS AR
i01273584 SEBP2276
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22760799
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 9EJ1156-UP
PART OF 8W-6228 CHASSIS AR
i01621840 SEBP2276
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
47. 1V-6341 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog 160H NA :

CONDENSER & MTG GP-REFRIGERANT
8X-7992 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7E-6461 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7E-6461 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
134-3997 COMPRESSOR GP-REFRIGERANT
101-1759 COMPRESSOR GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
103-8519 CONDENSER GP-REFRIGERANT
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH

Truck sale:

Caterpillar 160HNA, Construction
59,125 
Caterpillar 160HNA, Construction
- motor graders
TOROMONT CAT
Canada
Caterpillar 160HNA, Construction
 
Caterpillar 160HNA, Construction
- motor graders
MANTRAC NIGERIA LIMITED
Nigeria
CATERPILLAR 160HNA 1995
 
CATERPILLAR 160HNA 1995
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2005
 
CATERPILLAR 160HNA 2005
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2007
 
CATERPILLAR 160HNA 2007
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.