AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-5618 CONTROL GP-CLUTCH -INCHING PEDAL S/N 9EJ1-290 PART OF 8W-6228 CHASSIS AR 160H NA MOTOR GRADER


OPERATOR STATION
CONTROL GP
CONTROL GP-STEERING
CONVERSION GP
DOOR GP

MOTOR GRADER 160H NA MOTOR GRADER 9EJ
 160H Motor Grader 9EJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2276 160H NA 9EJ   (1994)

OPERATOR STATION

CONTROL GP
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
8W-5618 CONTROL GP-CLUTCH
 

#SEBP22760800
 

8W-5618: CONTROL GP-CLUTCH

8W-5618 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 9EJ1-290
PART OF 8W-6228 CHASSIS AR
i00122526 SEBP2276
8W5618 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 8G-7629 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 133-9186 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
43. 1B-2578 [1] NUT (3/8-16-THD)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 6J-1889 [1] SEAL-U-CUP  
 

#SEBP22760801
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 9EJ1-UP
PART OF 8W-6228 CHASSIS AR
Type 1
i00122360 SEBP2276
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22760802
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 9EJ1-UP
PART OF 8W-6228 CHASSIS AR
Type 2
i01868213 SEBP2276
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3769 J [1] PUMP GP-METERING (HMU)  
2. 384-5820 [1] WHEEL AS  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (KIT INCLUDES SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP22760803
 

8W-7630: CONVERSION AR-NON-ROPS

8W-7630 CONVERSION AR-NON-ROPS
S/N 9EJ1-UP
AN ATTACHMENT
i00122608 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8X-4154 Y [1] GUARD GP-PLATFORM  
  5P-8502 [1] PADLOCK GP  
  5P-8500 [1] KEY  
  8Y-6364 [1] SLEEVE  
  122-9575 Y [1] PANEL GP-CAB (INSTRUMENT)  
  8X-8945 Y [1] SEAT GP-STATIC  
  9D-3767 [1] PLUG-BUTTON  
  3V-4694 [1] PLUG-BUTTON  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22760804
 

8X-4153: CONVERSION AR-NON-ROPS

8X-4153 CONVERSION AR-NON-ROPS
S/N 9EJ1-UP
AN ATTACHMENT
i00122720 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8X-4154 Y [1] GUARD GP-PLATFORM  
  5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
  122-9575 Y [1] PANEL GP-CAB (INSTRUMENT)  
  8Y-4951 Y [1] SEAT GP-SUSPENSION  
  3V-4694 [1] PLUG-BUTTON  
  9D-3767 [1] PLUG-BUTTON  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP22760805
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB -RH
S/N 9EJ1-UP
Type 1
FIELD REPLACEMENT ORDER @@@@@553-1114@@@@@
i02758260 SEBP2276
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
3. 6D-6581 [14] RIVET-POP  
4. 6V-2773 [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
6. 8X-4066 [1] HINGE  
8. 8X-4262 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 282-8470 [1] DOOR AS-ACCESS (RH)  
  6V-9632 M [10] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 282-9436 [1] SPACER  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 D SEAL (1.5-M)  
45. 5P-5768 D SEAL (2.4-M)  
45A. 5P-5768 D SEAL (2.8-M)  
46. 122-2228 E SEAL (172-CM)  
47. 178-8894 E SEAL (340-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS  
50. 308-7593 [1] GLASS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP22760806
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB -RH
S/N 9EJ1-UP
Type 2
FIELD REPLACEMENT ORDER @@@@@553-1114@@@@@
i03571030 SEBP2276
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
4. 6V-2773 C [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
8. 487-5655 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 J [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 487-6629 [1] DOOR AS-CAB  
  6D-6581 [14] RIVET-POP  
  8X-4066 [1] HINGE  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
  3V-4694 [2] PLUG-BUTTON  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 C [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 CD SEAL (3-M)  
45. 5P-5768 CD SEAL (2.5-M)  
45A. 5P-5768 CD SEAL (2.8-M)  
46. 122-2228 E SEAL (148-CM)  
47. 178-8894 E SEAL (305-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS (LOWER)  
50. 308-7593 [1] GLASS (UPPER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP22760807
 

553-1114: DOOR GP-CAB

553-1114 DOOR GP-CAB -RH
S/N 9EJ1-UP
i07609288 SEBP2276
5531114 DOOR GP-CAB Parts scheme 5531114 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2773 [2] PLUG  
2. 6V-7636 [4] PIN AS-SPRING  
3. 8Y-4398 [1] LINK-CONNECTING  
4. 8Y-4400 [1] LATCH AS-DOOR  
5. 8Y-4620 [1] LINK-CONNECTING  
6. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 J [1] LOCK AS  
  226-0342 [1] CAM  
7. 107-9641 [1] PLATE AS  
8. 108-5950 [1] LATCH AS  
9. 108-5952 [1] LINK (RH)  
10. 114-9190 [1] SEAL  
11. 128-0037 [1] KNOB-BALL  
12. 566-7104 [1] LINK  
13. 199-2712 [1] HANDLE  
14. 282-9437 [1] PLATE  
15. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
16. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
17. 308-2025 [1] COVER (RH)  
18. 308-7592 [1] GLASS (LOWER)  
19. 308-7593 [1] GLASS (UPPER)  
20. 487-5655 [1] COVER  
21. 1H-3338 [1] LOCKWASHER  
22. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
23. 321-5918 [1] PLUG-BUTTON  
24. 487-6629 [1] DOOR AS-CAB  
  6D-6581 [14] RIVET-POP  
  8X-4066 [1] HINGE  
25. 5T-7486 [1] RETAINER-SPRING  
26. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
29. 8T-4181 M [6] BOLT (M6X1X20-MM)  
30. 8X-4245 M [1] BOSS (M6X1X18-MM)  
31. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
32. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
33. 9X-2546 M [4] BOLT (M6X1X20-MM)  
34. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
35. 5P-5969 D SEAL (1.5-M EACH)  
36. 122-2228 E SEAL (148-CM)  
37. 5P-5768 D SEAL (2.8-M)  
37A. 5P-5768 D SEAL (2.5-M)  
38. 178-8894 E SEAL (305-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP22760808
 

8X-4317: DOOR GP-CAB

8X-4317 DOOR GP-CAB -RH
S/N 9EJ1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
i00122727 SEBP2276
8X4317 DOOR GP-CAB Parts scheme 8X4317 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2677 [1] LINK (RELEASE)  
2. 1H-3338 [1] LOCKWASHER  
3. 5T-7486 [1] RETAINER-SPRING  
4. 6D-6581 [16] RIVET-POP  
5. 6V-2773 [2] PLUG  
6. 6V-7636 [4] PIN AS-SPRING  
7. 8X-3806 [1] HINGE  
8. 8X-4243 [1] COVER (RH)  
9. 8X-4262 [1] COVER (RH)  
10. 8X-3938 [1] GLASS (UPPER)  
11. 8X-4448 [1] GLASS (LOWER)  
12. 8Y-4398 [1] LINK-CONNECTING  
13. 8Y-4400 [1] LATCH AS-DOOR  
14. 8Y-4401 [1] HANDLE AS (INSIDE)  
15. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
16. 8Y-4620 [1] LINK-CONNECTING  
17. 8Y-4801 J [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
18. 9X-2546 M [4] BOLT (M6X1X20-MM)  
19. 107-9641 [1] PLATE AS  
20. 108-5950 [1] LATCH AS  
21. 108-5952 [1] LINK (RH)  
22. 114-9190 [1] SEAL  
23. 128-0037 [1] KNOB-BALL  
24. 199-2712 [1] HANDLE  
25. 199-2739 [1] DOOR AS (RH)(HIGH PROFILE)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 8T-4181 M [6] BOLT (M6X1X20-MM)  
29. 8X-4245 M [1] BOSS (M6X1X18-MM)  
30. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
31. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
32. 5P-5768 D SEAL (2.9-M)  
32A. 5P-5768 D SEAL (2.7-M)  
33. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

#SEBP22760809
 

8X-4318: DOOR GP-CAB

8X-4318 DOOR GP-CAB -LH
S/N 9EJ1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
i00122728 SEBP2276
8X4318 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-2677 [1] LINK (RELEASE)  
2. 1H-3338 [1] LOCKWASHER  
3. 5T-7486 [1] RETAINER-SPRING  
4. 6D-6581 [16] RIVET-POP  
5. 6V-2773 [2] PLUG  
6. 6V-7636 [4] PIN AS-SPRING  
7. 8X-3806 [1] HINGE  
8. 8X-4244 [1] COVER (LH)  
9. 8X-4263 [1] COVER (LH)  
10. 8X-3938 [1] GLASS (UPPER)  
11. 8X-4448 [1] GLASS (LOWER)  
12. 8Y-4398 [1] LINK-CONNECTING  
13. 8Y-4399 [1] LATCH AS-DOOR  
14. 8Y-4401 [1] HANDLE AS (INSIDE)  
15. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
16. 8Y-4620 [1] LINK-CONNECTING  
17. 8Y-4801 J [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
18. 9X-2546 M [4] BOLT (M6X1X20-MM)  
19. 107-9641 [1] PLATE AS  
20. 108-5949 [1] LATCH AS (LH)  
21. 108-5951 [1] LINK (LH)  
22. 114-9190 [1] SEAL  
23. 128-0037 [1] KNOB-BALL  
24. 199-2712 [1] HANDLE  
25. 199-2740 [1] DOOR AS (LH)(HIGH PROFILE)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 8T-4181 M [6] BOLT (M6X1X20-MM)  
29. 8X-4245 M [1] BOSS (M6X1X18-MM)  
30. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
31. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
32. 5P-5768 D SEAL (2.855M)  
32A. 5P-5768 D SEAL (2.725M)  
33. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 160H NA :

CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
8W-7630 CONVERSION AR-NON-ROPS
8X-4153 CONVERSION AR-NON-ROPS
DOOR GP-CAB
266-7031 DOOR GP-CAB
DOOR GP-CAB
266-7031 DOOR GP-CAB
DOOR GP-CAB
553-1114 DOOR GP-CAB
DOOR GP-CAB
8X-4317 DOOR GP-CAB

Truck sale:

Caterpillar 160HNA, Construction
59,125 
Caterpillar 160HNA, Construction
- motor graders
TOROMONT CAT
Canada
Caterpillar 160HNA, Construction
 
Caterpillar 160HNA, Construction
- motor graders
MANTRAC NIGERIA LIMITED
Nigeria
CATERPILLAR 160HNA 1995
 
CATERPILLAR 160HNA 1995
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2005
 
CATERPILLAR 160HNA 2005
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2007
 
CATERPILLAR 160HNA 2007
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.