AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

107-3424 EDGE GP-CUTTING -8 FT S/N 9EJ1-UP AN ATTACHMENT 160H NA MOTOR GRADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
RIPPER GP

MOTOR GRADER 160H NA MOTOR GRADER 9EJ
 160H Motor Grader 9EJ00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2276 160H NA 9EJ   (1994)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
107-3396 EDGE GP-CUTTING
107-3397 EDGE GP-CUTTING
107-3424 EDGE GP-CUTTING
195-7266 EDGE GP-CUTTING
195-7267 EDGE GP-CUTTING
EDGE-CUTTING
489-6705 EDGE-CUTTING
 

#SEBP22760980
 

107-3424: EDGE GP-CUTTING

107-3424 EDGE GP-CUTTING -8 FT
S/N 9EJ1-UP
AN ATTACHMENT
i00123058 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5J-4773 [10] BOLT-PLOW (3/4-10X2.5-IN)  
  4T-2236 [2] EDGE-CUTTING  
 

#SEBP22760981
 

195-7266: EDGE GP-CUTTING

195-7266 EDGE GP-CUTTING -2 FT
S/N 9EJ1-UP
CARBIDE
AN ATTACHMENT
i01631676 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22760982
 

195-7267: EDGE GP-CUTTING

195-7267 EDGE GP-CUTTING -3 FT
S/N 9EJ1-UP
AN ATTACHMENT
i01631680 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22760983
 

489-6705: EDGE-CUTTING

489-6705 EDGE-CUTTING -ABRASION RESISTANT
S/N 9EJ1-UP
8-FT
FIELD INSTALLATION
i06688014 SEBP2276
4896705 EDGE-CUTTING Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP22760984
 

110-5326: EXTENSION GP-BLADE

110-5326 EXTENSION GP-BLADE -RH
S/N 9EJ1-UP
2-FT
AN ATTACHMENT
i00123135 SEBP2276
1105326 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
2. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
3. 176-5639 [1] PLATE AS  
4. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
5. 110-5336 [1] ANGLE AS  
6. 110-5334 [3] SPACER (3-MM THK)  
7. 3G-2165 [1] EDGE-CUTTING  
8. 133-7523 [1] EXTENSION  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22760985
 

110-5327: EXTENSION GP-BLADE

110-5327 EXTENSION GP-BLADE -LH
S/N 9EJ1-UP
2-FT
AN ATTACHMENT
i00123136 SEBP2276
1105327 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 110-5335 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22760986
 

524-8606: EXTENSION GP-BLADE

524-8606 EXTENSION GP-BLADE
S/N 9EJ1-UP
BLADE ATTACHMENT KIT
FIELD INSTALLATION
i06922175 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  110-5336 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7523 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  176-5639 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP22760987
 

148-0657: LIFT GP-BLADE

148-0657 LIFT GP-BLADE
S/N 9EJ510-UP
FOR USE WITH @@@@@114-0025@@@@@, REQUIRES MACHINE EQUIPPED WITH DOZER TYPE VALVE GP & LINES GP
AN ATTACHMENT
i01162240 SEBP2276
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
  4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
  5F-9891 [4] BOLT (1-1/2-12X6-IN)  
  6V-8636 [1] CONNECTOR  
  6V-8724 [3] ELBOW  
  3B-8489 [13] FITTING-GREASE (1/8-27 PTF)  
  2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
  5M-6667 [8] LOCKNUT (1-1/2-12-THD)  
  2M-9780 [4] SEAL-O-RING  
  3J-1907 [4] SEAL-O-RING  
  6V-8397 [4] SEAL-O-RING  
 

#SEBP22760988
 

8X-1935: LIFT GP-BLADE

8X-1935 LIFT GP-BLADE
S/N 9EJ1-UP
PART OF 8W-6227 BLADE AR
i00122636 SEBP2276
8X1935 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
3. 7D-8891 [2] RETAINER  
4. 8X-3616 [1] ARM AS (RH)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 8D-8168 [1] BEARING (63.65-MM ID)  
7. 2J-3506 [6] NUT-FULL (3/4-10-THD)  
  3B-6753 [6] BOLT (3/4-10X4.75-IN)  
8. 5P-8248 [16] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 8X-5106 [1] STUD-BALL  
10. 8D-4332 [2] PIN  
11. 8X-5110 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
12. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
13. 8X-5109 [1] BAR AS  
14. 8X-5108 [2] BUSHING  
15. 124-5836 [5] BUSHING  
16. 0S-1756 [4] BOLT (3/4-10X4.25-IN)  
17. 9D-3583 [2] LOCK  
18. 7H-2444 [2] SEAL-O-RING  
19. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
20. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
21. 7D-8879 B [8] SHIM (0.127-MM THK)  
22. 7D-8881 B [6] SHIM (0.254-MM THK)  
23. 7D-8882 B [2] SHIM (0.508-MM THK)  
24. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
25. 5F-0149 [2] SEAL-O-RING  
26. 7D-8883 [2] SEAL  
27. 8X-5107 [1] PIN  
28. 3P-1461 [4] SEAL-LIP TYPE  
29. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
30. 8X-5111 [2] LOCK  
31. 7D-8884 [2] SEAL  
32. 8X-3615 [1] ARM AS (LH)  
  8D-8168 [1] BEARING (63.65-MM ID)  
  7D-8889 [1] BEARING (76.35-MM ID)  
33. 124-0435 [1] PLATE  
34. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
35. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP22760989
 

9W-7467: MOUNTING GP-RIPPER

9W-7467 MOUNTING GP-RIPPER
S/N 9EJ1-UP
PART OF 9W-7603 RIPPER AR
AN ATTACHMENT
i00122900 SEBP2276
9W7467 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7438 [1] PLATE AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
  104-4522 [2] PLATE  
2. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
3. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
4. 9W-7470 [2] PIN  
5. 7X-0403 [10] BOLT (1-8X2.25-IN)  
6. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
7. 109-6776 [2] PIN  
8. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 3W-7256 [2] SPACER (47X80X16-MM THK)(16MM THK)  
11. 3W-7254 [2] SPACER (47X80X20-MM THK)(20MM THK)  
12. 9W-7469 [2] PIN  
13. 104-4523 [2] CAM AS  
14. 8E-6130 [2] LINK AS  
  2K-4233 [2] BOSS  
15. 6P-5647 [2] BOSS  
 

Information:

Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 160H NA :

107-3397 EDGE GP-CUTTING
107-3396 EDGE GP-CUTTING
BRACKET GP-SCARIFIER
116-0379 BRACKET GP-SCARIFIER
BLADE GP-BULLDOZER
258-4500 BLADE GP-BULLDOZER
BLADE GP-BULLDOZER
152-1353 BLADE GP-BULLDOZER
BLADE GP
8X-1955 BLADE GP
BLADE GP
8W-7465 BLADE GP
BLADE GP
150-4250 BLADE GP
195-7266 EDGE GP-CUTTING
195-7267 EDGE GP-CUTTING
EDGE-CUTTING
489-6705 EDGE-CUTTING
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
524-8606 EXTENSION GP-BLADE
148-0657 LIFT GP-BLADE
LIFT GP-BLADE
8X-1935 LIFT GP-BLADE

Truck sale:

Caterpillar 160HNA, Construction
59,125 
Caterpillar 160HNA, Construction
- motor graders
TOROMONT CAT
Canada
Caterpillar 160HNA, Construction
 
Caterpillar 160HNA, Construction
- motor graders
MANTRAC NIGERIA LIMITED
Nigeria
CATERPILLAR 160HNA 1995
 
CATERPILLAR 160HNA 1995
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2005
 
CATERPILLAR 160HNA 2005
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2007
 
CATERPILLAR 160HNA 2007
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.