AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7G-1362 CONTROL GP-TRANSMISSION HYD S/N 8KA4000-4469 PART OF 7G-1140 TRANSMISSION AR-POWER SHIFT 769C


POWER TRAIN
CONTROL GP-TRANSMISSION HYD
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILTER & LINES GP-TORQUE CONV
FILTER GP
GEAR GP
AXLE GP

TRUCK 769C TRUCK 01X
 769C Truck 01X06600-UP (MACHINE) POWERED BY 3408 Engine SEBP2281 769C 01X   (1978)

POWER TRAIN

CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
7G-1362 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
7G-1362 CONTROL GP-TRANSMISSION HYD
VALVE GP-TRANSMISSION CONTROL
7G-1364 VALVE GP-TRANSMISSION CONTROL
 

#SEBP22810240
 

7G-1362: CONTROL GP-TRANSMISSION HYD

7G-1362 CONTROL GP-TRANSMISSION HYD
S/N 8KA4000-4469
PART OF 7G-1140 TRANSMISSION AR-POWER SHIFT
i00108160 SEBP2281
7G1362 CONTROL GP-TRANSMISSION HYD Parts scheme 7G1362 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-1120 CY [2] VALVE GP-SOLENOID (UPSHIFT & DOWNSHIFT)  
2. 6Y-0789 C [1] PLUG  
  3D-2824 C [1] SEAL-O-RING  
  3P-0647 C [1] SEAL-O-RING  
3. 9S-8001 C [5] PLUG  
  4J-7533 C [5] SEAL-O-RING  
4. 3T-0918 [2] SLEEVE  
5. 3T-0919 [1] SLEEVE  
  6V-4365 [2] SEAL-O-RING  
6. 8M-8157 [4] SEAL-O-RING  
7. 0S-1594 [1] BOLT (3/8-16X1-IN)  
8. 9F-2773 [4] BOLT (3/8-16X8.5-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8M-5254 [4] SEAL-O-RING  
10. 7G-1595 [2] SLEEVE  
11. 8M-4437 [2] SEAL-O-RING  
12. 2S-1457 [1] SLEEVE  
13. 7G-1364 Y [1] VALVE GP-TRANSMISSION CONTROL (SELECTOR & PRESSURE)  
14. 7G-9473 [1] SLEEVE  
15. 8M-4992 [1] SEAL-O-RING  
16. 9G-9412 [1] ADAPTER  
17. 8M-4432 [2] SEAL-O-RING  
18. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 9G-9150 [2] CLIP  
20. 100-3998 C [1] MANIFOLD AS  
  5P-7661 C [1] BEARING AS-NEEDLE  
21. 9S-8005 [5] PLUG (3/4-16-THD)  
22. 3K-0360 [5] SEAL-O-RING  
23. 3J-1907 [3] SEAL-O-RING  
24. 9S-8001 C [5] PLUG  
  4J-7533 C [5] SEAL-O-RING  
25. 6Y-9850 [1] COUPLING AS  
26. 8S-5575 [1] SEAL-LIP TYPE  
27. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 3D-4197 [1] COVER  
29. 7T-3418 [1] HARNESS AS-TRANSMISSION  
  8M-4988 [1] SEAL-O-RING  
30. 6V-5828 CY [1] SENSOR GP-POSITION (TRANSMISSION GEAR)  
31. 7S-5757 [1] RING-RETAINING  
32. 6T-5132 [1] COVER  
  6T-5133 [1] GASKET  
33. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
34. 6V-0852 [1] CAP-DUST  
35. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
36. 0S-1619 [2] BOLT (3/8-16X3-IN)  
37. 0S-1594 [4] BOLT (3/8-16X1-IN)  
38. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
39. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
40. 9S-8004 [1] PLUG (9/16-18-THD)  
41. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
42. 6T-8823 [1] GUARD AS  
43. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
44. 5F-7054 [5] SEAL-O-RING  
45. 8M-4446 [1] SEAL-O-RING  
46. 6V-0484 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22810241
 

7G-1362: CONTROL GP-TRANSMISSION HYD

7G-1362 CONTROL GP-TRANSMISSION HYD
S/N 8KA4470-UP
PART OF 7G-1140 TRANSMISSION AR-POWER SHIFT
i00093445 SEBP2281
7G1362 CONTROL GP-TRANSMISSION HYD Parts scheme 7G1362 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-1120 Y [2] VALVE GP-SOLENOID (UPSHIFT & DOWNSHIFT)  
2. 6Y-0789 [1] PLUG  
  3D-2824 [1] SEAL-O-RING  
  3P-0647 [1] SEAL-O-RING  
3. 9S-8001 [5] PLUG  
  4J-7533 [5] SEAL-O-RING  
4. 3T-0918 [2] SLEEVE  
5. 3T-0919 [1] SLEEVE  
  6V-4365 [2] SEAL-O-RING  
6. 8M-8157 [4] SEAL-O-RING  
7. 0S-1594 [1] BOLT (3/8-16X1-IN)  
8. 9F-2773 [4] BOLT (3/8-16X8.5-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8M-5254 [4] SEAL-O-RING  
10. 7G-1595 [2] SLEEVE  
11. 8M-4437 [2] SEAL-O-RING  
12. 2S-1457 [1] SLEEVE  
13. 7G-1364 Y [1] VALVE GP-TRANSMISSION CONTROL (SELECTOR & PRESSURE)  
14. 7G-9473 [1] SLEEVE  
15. 8M-4992 [1] SEAL-O-RING  
16. 9G-9412 [1] ADAPTER  
17. 8M-4432 [2] SEAL-O-RING  
18. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 9G-9150 [2] CLIP  
20. 100-3998 [1] MANIFOLD AS  
  5P-7661 [1] BEARING AS-NEEDLE  
21. 9S-8005 [5] PLUG (3/4-16-THD)  
22. 3K-0360 [5] SEAL-O-RING  
23. 3J-1907 [3] SEAL-O-RING  
24. 9S-8001 [5] PLUG  
  4J-7533 [5] SEAL-O-RING  
25. 6Y-9850 [1] COUPLING AS  
26. 8S-5575 [1] SEAL-LIP TYPE  
27. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 3D-4197 [1] COVER  
29. 120-9288 C [1] HARNESS AS-TRANSMISSION  
  8M-4988 [1] SEAL-O-RING  
30. 118-8471 CY [1] SENSOR GP-POSITION (TRANSMISSION GEAR)  
31. 7S-5757 [1] RING-RETAINING  
32. 6T-5132 [1] COVER  
  6T-5133 [1] GASKET  
33. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
34. 6V-0852 [1] CAP-DUST  
35. 0S-1617 [6] BOLT (5/16-18X0.75-IN)  
36. 0S-1619 [2] BOLT (3/8-16X3-IN)  
37. 0S-1594 [4] BOLT (3/8-16X1-IN)  
38. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
39. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
40. 9S-8004 [1] PLUG (9/16-18-THD)  
41. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
42. 6T-8823 [1] GUARD AS  
43. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
44. 5F-7054 [5] SEAL-O-RING  
45. 8M-4446 [1] SEAL-O-RING  
46. 6V-0484 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22810242
 

3T-5237: COVER GP-SHIPPING

3T-5237 COVER GP-SHIPPING
S/N 8KA4000-UP
PART OF 7G-1140 TRANSMISSION AR-POWER SHIFT
i00093402 SEBP2281
3T5237 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0768 [4] BOLT (7/16-14X1.75-IN)  
2. 1S-3725 [1] COVER  
3. 8E-7366 [1] GASKET  
4. 0S-1620 [4] BOLT (1/2-13X0.75-IN)  
5. 8E-7367 [1] GASKET  
6. 0T-0102 [2] BOLT (3/8-16X0.625-IN)  
7. 2B-0858 [1] PLUG-PIPE  
8. 7J-0402 [1] COVER  
 

#SEBP22810243
 

9D-8935: DIFFERENTIAL & BEVEL GEAR GP

9D-8935 DIFFERENTIAL & BEVEL GEAR GP
S/N 01X6600-UP
PART OF 5T-2872 POWER TRAIN AR
i00093480 SEBP2281
9D8935 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6054 [1] YOKE  
2. 9D-9864 [1] CAGE-BEARING  
3. 9M-3879 [1] SEAL-LIP TYPE  
4. 9D-0019 B [5] SHIM (0.13-MM THK)  
5. 9D-0021 B [5] SHIM (0.18-MM THK)  
6. 5S-3676 [1] SEAL-O-RING  
7. 228-7555 [1] CARRIER AS  
  8F-4486 [4] BOLT (1-1/8-7X6.5-IN)  
  3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
  3D-5692 [4] BUSHING-TERMINAL  
8. 0L-1178 [16] BOLT (3/4-10X2-IN)  
11. 4D-5289 [2] RING-ADJUSTMENT  
12. 1B-4034 [1] CONE-BEARING  
13. 4B-8393 [1] CUP-BEARING  
14. 7D-3029 [1] PIN-THRUST  
15. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
17. 8M-3391 [1] COVER  
18. 9M-5874 B [1] SHIM PACK (INCLUDES 30-SHIMS)  
19. 2H-3932 [1] SEAL-O-RING  
20. 5P-8081 [36] BOLT-LOCKING (3/4-16X2-IN)  
21. 5P-8248 [53] WASHER-HARD (20X36.5X3.5-MM THK)  
22. 8D-3382 [1] GEAR-DIFFERENTIAL RING (52 TEETH)  
23. 107-7857 CY [1] DIFFERENTIAL GP  
24. 6K-7917 [2] BOLT-LOCKING (1/2-13X1-IN)  
26. 9K-4454 [2] LOCK  
27. 2D-9457 [1] CONE-BEARING (TAPERED ROLLER)  
28. 4F-2041 [1] CUP-BEARING (TAPERED ROLLER)  
29. 2D-9454 [1] CUP-BEARING  
30. 2D-9455 [1] CONE-BEARING  
31. 3D-8422 [1] SEAL-O-RING  
32. 8X-7701 [1] PINION (19-TEETH)  
33. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
34. 6V-2700 [1] SEAL-O-RING  
36. 1B-6579 [1] CONE-BEARING  
37. 6V-3579 [1] CUP-BEARING  
38. 6G-5495 [1] COLLAR  
39. 5P-3882 [1] BOLT-LOCKING (3/4-10X2.25-IN)  
41. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22810244
 

107-7857: DIFFERENTIAL GP

107-7857 DIFFERENTIAL GP
S/N 01X6600-UP
PART OF 9D-8935 DIFFERENTIAL & BEVEL GEAR GP
i00093524 SEBP2281
1077857 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7517 [1] HOUSING (DIFFERENTIAL)  
2. 3D-6509 [2] DOWEL  
3. 6G-0703 [1] SPIDER-DIFFERENTIAL  
4. 8W-8671 [4] PINION-DIFFERENTIAL BEVEL (20-TEETH)  
5. 108-3187 [1] HOUSING AS-DIFFERENTIAL  
6. 3D-6509 [6] DOWEL  
7. 4D-8132 [4] BEARING AS-ROLLER  
8. 4D-7536 [4] LOCKNUT  
9. 107-2958 [4] NUT (2-1/8-12-THD)  
10. 2H-3749 [8] BOLT (3/4-16X7-IN)  
11. 2K-0337 [8] LOCKNUT (3/4-16-THD)  
12. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
13. 3D-5564 [2] WASHER-THRUST  
14. 4D-8131 [4] RETAINER  
15. 8W-7702 [2] GEAR-DIFFERENTIAL BEVEL (24-TEETH)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP22810245
 

6D-1520: DRIVE GP-FINAL

6D-1520 DRIVE GP-FINAL
S/N 01X6600-UP
PART OF 5T-2872 POWER TRAIN AR
i00093423 SEBP2281
6D1520 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-7604 CB [1] SHAFT-AXLE (LH)  
2. 7D-7605 CB [1] SHAFT-AXLE (RH)  
3. 207-6089 [2] BEARING  
4. 160-0717 C [2] HUB (PLANETARY)  
5. 9M-3860 [2] GEAR-RING (76-TEETH)  
6. 6K-7917 C [16] BOLT-LOCKING (1/2-13X1-IN)  
7. 2R-0098 [2] SEAL-O-RING  
8. 0L-1178 [46] BOLT (3/4-10X2-IN)  
  5P-8248 [46] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 5D-9741 [2] CARRIER AS  
    (EACH INCLUDES)
10. 5M-1932 [8] STUD-TAPERLOCK (1/2-13X2.17-IN)  
11. 6D-0692 [2] SEAL-O-RING  
12. 7D-7606 [2] GEAR (20-TEETH)  
13. 7D-6705 [2] RING-RETAINING  
14. 6D-6961 [2] COVER AS  
    (EACH INCLUDES)
  6D-6864 [1] BUTTON  
15. 8M-3837 [2] PLUG-MAGNETIC (FINAL DRIVE)  
  2A-3398 C [2] GASKET (FINAL DRIVE MAGNETIC PLUG)  
16. 6Y-9885 [12] BEARING AS-ROLLER  
17. 6V-8188 [16] NUT (1/2-13-THD)  
  8T-4223 C [16] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 7H-0308 [6] RING-RETAINING  
19. 9M-4422 [6] GEAR (27-TEETH)  
20. 5F-0304 [2] PLUG (FINAL DRIVE)  
  2A-1162 [2] GASKET (FINAL DRIVE DRAIN PLUG)  
21. 6F-4855 [2] SEAL-O-RING  
22. 8X-9563 [6] SPACER (80.52X112.06X28.57-MM THK)  
23. 8W-7207 [8] RETAINER  
24. 8X-5689 [6] SHAFT-PLANETARY  
25. 8X-4552 [12] WASHER (78X127X5-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22810246
 

8W-9885: FILTER & LINES GP-TORQUE CONV

8W-9885 FILTER & LINES GP-TORQUE CONV
S/N 01X6600-UP
PART OF 109-2323 HYDRAULIC AR
i00108299 SEBP2281
8W9885 FILTER & LINES GP-TORQUE CONV Parts scheme 8W9885 FILTER & LINES GP-TORQUE CONV Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-6836 I [1] HOSE AS  
2. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
3. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 1P-4579 [4] FLANGE-HALF  
5. 105-8676 I [1] HOSE AS  
6. 4J-0524 [2] SEAL-O-RING  
7. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
8. 8M-2773 [6] CLIP (LOOP)  
9. 8X-3419 [1] HOSE AS  
10. 4J-5267 [1] SEAL-O-RING  
11. 7X-0346 [4] BOLT (5/8-11X2-IN)  
12. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
13. 8K-6892 [1] HOSE  
14. 5P-0598 [2] CLAMP-HOSE  
15. 112-3345 CI [1] HOSE AS  
16. 7D-7233 [2] CLIP (LOOP)  
17. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
19. 112-3346 C [1] GUARD AS  
20. 8X-7658 [1] TUBE  
21. 5P-7462 [3] CLIP (SLOT)  
22. 5P-7463 [3] CLIP (TAB)  
23. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
24. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 4L-6454 C [4] BOLT (3/8-16X1-IN)  
26. 8T-4896 C [19] WASHER-HARD (10.2X18.5X2.5-MM THK)  
27. 2H-3940 C [1] ELBOW  
28. 112-3344 CI [2] HOSE AS  
29. 7X-0296 [3] BOLT (3/8-16X5.5-IN)  
30. 6V-8782 C [1] TEE  
31. 3P-0348 Y [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
32. 8M-4443 [2] SEAL-O-RING  
33. 8M-8157 [2] SEAL-O-RING  
34. 4B-4845 [2] PLUG  
35. 7X-0290 [6] BOLT (3/8-16X3.5-IN)  
36. 8M-4435 [2] SEAL-O-RING  
37. 6I-9513 CY [1] VALVE GP-LOCKUP CLUTCH & SOL  
38. 3D-2824 [1] SEAL-O-RING  
39. 6V-9007 [1] ELBOW  
40. 6V-9746 [3] SEAL-O-RING  
41. 2B-0858 [2] PLUG-PIPE  
42. 4J-0522 [1] SEAL-O-RING  
43. 1P-4578 [2] FLANGE-HALF  
44. 4D-3734 [1] ELBOW  
45. 5P-2566 [12] BOLT (1/2-13X1.5-IN)  
46. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 2G-1412 I [1] HOSE AS  
48. 6D-4636 [1] CLIP (LOOP)  
49. 1P-4579 [4] FLANGE-HALF  
50. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
51. 3J-1907 [5] SEAL-O-RING  
52. 6V-0484 [1] ELBOW  
53. 6V-0852 [1] CAP-DUST  
54. 8P-1471 Y [1] VALVE GP-RELIEF (TORQUE CONVERTER OUTLET)  
55. 8T-8916 [4] BOLT (7/16-14X1.5-IN)  
56. 8T-5360 [4] WASHER (12X22.5X2.5-MM THK)  
57. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
58. 1P-4576 [2] FLANGE-HALF  
59. 4J-5267 [1] SEAL-O-RING  
60. 101-2586 CI [1] HOSE AS  
61. 6V-9005 C [1] ELBOW  
62. 7M-8485 [2] SEAL-O-RING  
63. 6V-8398 C [4] SEAL-O-RING  
64. 6V-8944 C [1] REDUCER  
65. 6V-8557 C [1] NUT-FACE SEAL (1-7/16-12-THD)  
66. 6V-9853 [1] ELBOW  
67. 1J-2859 [1] SEAL-O-RING  
68. 8W-9870 [1] TUBE AS  
69. 4J-0524 [3] SEAL-O-RING  
70. 5T-6917 I [1] HOSE AS  
71. 7X-0288 [1] BOLT (3/8-16X1.625-IN)  
72. 5P-7467 [2] CLIP (TAB)  
73. 5P-7466 [2] CLIP (SLOT)  
74. 8T-8919 [1] BOLT (1/2-13X1.75-IN)  
75. 6V-8188 [1] NUT (1/2-13-THD)  
76. 2H-6184 [1] SEAL-O-RING  
77. 8X-7659 [1] TUBE AS  
78. 6V-8627 [1] ELBOW  
79. 6V-8641 [1] CONNECTOR  
80. 6V-8785 C [1] TEE  
81. 8T-9101 C [2] BOLT (3/8-16X2.75-IN)  
82. 105-0381 C [1] BLOCK  
83. 9M-2904 [1] CLAMP-HOSE  
84. 8X-4575 [1] FILTER AS-BREATHER  
85. 5T-6919 I [1] HOSE AS  
86. 7G-5000 Y [1] FILTER GP-OIL (TORQUE CONVERTER)  
87. 3K-0360 C [1] SEAL-O-RING  
88. 4J-5477 [2] SEAL-O-RING  
89. 9S-4191 [1] PLUG (9/16-18-THD)  
90. 8K-6892 [1] HOSE  
91. 5P-0598 [2] CLAMP-HOSE  
92. 8C-6872 C [1] CONNECTOR  
93. 5K-9090 C [3] SEAL-O-RING  
94. 3P-2404 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22810247
 

7G-5000: FILTER GP-OIL

7G-5000 FILTER GP-OIL -TRANSMISSION-TORQUE CONVERTER
S/N 01X6600-UP
WITH HOUSING
PART OF 8W-9885 FILTER & LINES GP-TORQUE CONV, 8W-9890 LINES GP-TRANSMISSION OIL
i00089701 SEBP2281
7G5000 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-0749 [1] BASE-XMSN OIL FILTER  
2. 7G-4998 [1] SPOOL-BYPASS  
3. 7M-1297 [1] SPRING  
4. 2J-6356 [1] RING-RETAINING  
5. 3S-8652 [1] SPRING  
6. 9S-4191 [2] PLUG (9/16-18-THD)  
  3J-1907 [2] SEAL-O-RING  
7. 6P-5332 [1] RETAINER  
8. 1R-0741 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)(DISPOSABLE)  
    -OR-
  4T-3132 CA [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)(FIRE RESISTANT FLUIDS)  
    -OR-
  132-8876 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(CLEANOUT/HIGH EFFICIENCY)  
9. 9G-8629 C [1] HOUSING AS-OIL FILTER  
10. 5P-3620 [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22810248
 

7G-1150: GEAR GP-TRANSFER

7G-1150 GEAR GP-TRANSFER -INPUT
S/N 8KA4000-UP
PART OF 7G-1140 TRANSMISSION AR-POWER SHIFT
i00093442 SEBP2281
7G1150 GEAR GP-TRANSFER Parts scheme 7G1150 GEAR GP-TRANSFER Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
2. 6P-2515 [1] RING AS-LIFTING  
  1K-0958 [1] CLAMP-CENTER  
3. 8H-7521 [1] SEAL-O-RING  
4. 0S-1594 [4] BOLT (3/8-16X1-IN)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6B-2882 [1] SPACER (0.406X0.75X0.312-IN THK)  
7. 8P-3795 [1] SCREEN-SUCTION (GEAR TRANSFER-INPUT)  
8. 8P-3251 [1] COVER AS  
  8P-1722 [1] COVER  
  7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
9. 4S-8603 [1] SCREEN GP-MAGNETIC  
10. 7G-1152 [1] TUBE AS  
11. 5K-9243 [1] ELBOW-FLARED  
12. 2A-4639 [1] BOLT (3/8-16X1.625-IN)  
13. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
14. 2B-2404 [1] CLIP  
15. 0S-1587 [17] BOLT (1/2-13X1.75-IN)  
  5P-8245 [17] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
17. 142-8075 [1] SEAL-LIP TYPE  
18. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
19. 5M-2894 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 3P-8147 B [1] SHIM PACK (INCLUDES 9-SHIMS)  
21. 2M-3818 [1] SEAL-O-RING  
22. 7G-1151 [1] CASE-TRANSFER GEAR  
23. 108-4879 [1] GEAR-TRANSFER (71-TEETH)  
24. 1P-3934 [2] CUP-BEARING  
  1P-3935 [2] CONE-BEARING  
25. 7G-1157 B [1] SHIM PACK (INCLUDES 22-SHIMS)  
26. 030-0060 [2] CUP-BEARING  
  177-7886 [2] CONE  
27. 108-4880 [1] GEAR-TRANSFER (54-TEETH)  
28. 6M-5218 [1] SEAL-O-RING  
29. 7G-1156 [1] CAGE-BEARING  
30. 0S-1588 [13] BOLT (3/8-16X1.25-IN)  
31. 3P-8146 [1] CAGE-BEARING  
32. 3P-8143 [1] YOKE  
  B   USE AS REQUIRED
 

#SEBP22810249
 

5T-4406: HOUSING AS-REAR AXLE

5T-4406 HOUSING AS-REAR AXLE
S/N 01X6600-UP
PART OF 198-5949, 9D-8950 HOUSING GP-REAR AXLE
FIELD REPLACEMENT ORDER @@@@@198-5949@@@@@
i01486826 SEBP2281
5T4406 HOUSING AS-REAR AXLE Parts scheme
  For full view, you need register

Parts for your 769C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-9836 [3] BOSS (3/8-16-THD)  
 

Information:

Special Instruction
Converting ICM Transmission And Torque Converter Lock-up Controls To Spool-Type Solenoid Valve Groups{3152, 3150}
Converting ICM Transmission And Torque Converter Lock-up Controls To Spool-Type Solenoid Valve Groups{3152, 3150}
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Transmission Hydraulic Control Group<BR> 7G1362
768C TRACTOR & 769C TRUCK POWER TRAIN
Transmission Hydraulic Control<BR> 7G-1362
768C TRACTOR & 769C TRUCK POWER TRAIN
Hydraulic Controls For The Transmission
768C TRACTOR & 769C TRUCK POWER TRAIN
Reuse And Salvage Guidelines
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Individual Clutch Modulation (ICM) Control Valves{3065, 3139}
Bench Test Procedures
Bench Test Procedure For A 769C, 69D, 769D Off-Highway Truck, A 771C, 771D Quarry Truck, and A 768C Tractor Transmission{3030, 3073}
Bench Test Procedure For A 769C, 69D, 769D Off-Highway Truck, A 771C, 771D Quarry Truck, and A 768C Tractor Transmission{3030, 3073}
Bench Test Procedure for a 768C and 769C Off-Highway Truck Transmission {0374, 0599, 0720, 3030, 3064, 3073}
Bench Test Procedure for a 768C and 769C Off-Highway Truck Transmission {0374, 0599, 0720, 3030, 3064, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valves
768C TRACTOR & 769C TRUCK POWER TRAIN
Transmission Hydraulic Control Valves
768C TRACTOR & 769C TRUCK POWER TRAIN
Hydraulic Control Linkage
768C TRACTOR & 769C TRUCK MACHINE SYSTEMS
Transmission Hydraulic Controls
768C TRACTOR & 769C TRUCK POWER TRAIN DISASSEMBLY & ASSEMBLY
Service Magazine
Erratic Transmission Shifting On Machines Equipped With Individual Clutch Modulation (ICM) Transmission Controls{3167}
1990/01/08
New Adjustment Screw Wiper Used On Transmission Priority Valve{3167,3152}
1981/03/30
New Valve Seat Used In Shift Pressure Valve Group{3152,3167}
1981/12/14
New Design Drain Tube For Transmission Solenoid Valve{3163,3167}
1982/02/15
Priority Valve Now Lapped For Better Operation{3180,3152,3167}
1982/05/17
Stronger Guard For Transmission Control Shift Cylinder{3163,3167}
1982/10/11
New Tube Assemblies Have Flexible Connections To Decrease Vibration Damage{3167,3154}
1982/10/18
Seals Used To Prevent Vibration Of Switch Cover Bolts In Transmission Control{3172,3167}
1982/10/18
New Speed Sensor For Individual Clutch Modulation Transmission Controls{3175,3168}
1986/06/30
New Detent Spring Assembly Used In Selector And Pressure Control Valve Group In Transmission Hydraulic Control Groups{3152,3167}
1986/09/29
New Shafts And Shaft Assembly Replace Former Coupling Assemblies In Transmission Hydraulic Control Groups {3167}
1987/01/26
Stronger Detent Cam Pin Arrangement Used In Selector And Pressure Control Valve Group Of Transmission Hydraulic Controls {3152,3158}
1988/01/25
Improved System Relief Spring Used In Selector And Pressure Control Valve Group Of Transmission Hydraulic Controls{3152}
1988/03/28
New Transmission Control Switch Used In Transmission Hydraulic Controls {3168,3171}
1989/08/07
New Switch Drive Coupling Assembly Used In Transmission Hydraulic Controls {3167,3168}
1989/09/04
Check Rotary Actuator Stop Vane Bolts{3158,3167}
1990/04/02
Identifying Harness Codes For ICM (Individual Clutch Modulation) Transmission Controls{3168}
1990/04/09
Wider Support Assembly Prevents Breakage Of 9W7008 Detent Springs In Selector And Pressure Control Groups Of ICM Transmission Hydraulic Controls{3167}
1990/07/16
Probable Causes Of Transmission Hunting In Individual Clutch Modulation (ICM) Transmissions{3150,3167}
1991/09/30
Modify Individual Clutch Modulation (ICM) Control Valves During Transmission Rebuild{3152,3158}
1992/05/11
New ICM Transmission Control Actual Gear Switch{3175}
1992/06/29
New ICM Transmission Control Speed Sensor{3175}
1992/07/13
Spool-type Shift Solenoids Used In ICM Transmission Controls{3152,3150}
1992/10/12
New Electronic Programmable Transmission Control II (EPTC II) For ICM Transmissions{3168}
1993/02/01
New Spring Saves O-Ring Seal In ICM Controls{3150}
1993/06/28
New ICM Transmission Control (Actual Gear Switch) Is Available{3168}
1995/10/30
Detent Spring For The ICM Transmission Control Improves Service Life{3168}
1996/01/15
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
New Load Piston Body Available In ICM Pressure Control Valve Group {3073,3152,3167}
1998/10/19
ICM Control Valve Group; Debris Wear And Control Malfunction {3150,3157,3167}
1999/01/11
An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2009/08/24
A New Transmission Harness and a New Position Sensor Group Are Now Used on Certain Cat Products {1408, 1439, 3167}
2009/11/05
An Improved Transmission Harness Is Now Used for Certain Cat<SUP>&reg;</SUP> Products {1408, 3167, 5736}
2012/12/21

Caterpillar Parts SIS Catalog 769C :

8X-5560 CONTROL AR-TRACTION
8X-5550 CONTROL AR-TRACTION
2A-6904 CONTROL AR-TRACTION
CASE & PARTS GP-PLANETARY
7G-1160 CASE & PARTS GP-PLANETARY
232-2943 BEARING GP-POWER TRAIN
ACTUATOR GP-ROTARY
9W-4119 ACTUATOR GP-ROTARY
WIRING GP-SENSOR
8X-6950 WIRING GP-SENSOR
WIRING GP-SENSOR
2A-6903 WIRING GP-SENSOR
CONTROL GP-TRANSMISSION HYD
7G-1362 CONTROL GP-TRANSMISSION HYD
COVER GP-SHIPPING
3T-5237 COVER GP-SHIPPING
DIFFERENTIAL & BEVEL GEAR GP
9D-8935 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
107-7857 DIFFERENTIAL GP
DRIVE GP-FINAL
6D-1520 DRIVE GP-FINAL
FILTER & LINES GP-TORQUE CONV
8W-9885 FILTER & LINES GP-TORQUE CONV
FILTER GP-OIL
7G-5000 FILTER GP-OIL
GEAR GP-TRANSFER
7G-1150 GEAR GP-TRANSFER

Truck sale:

Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
MACALLISTER MACHINERY CO., INC
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C
 
Caterpillar 769C
- Off Highway Trucks
HOLT CAT
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
68.091 
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.