AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y3764 FASTENER GP PART OF 1011665 GOVERNOR, FUEL INJECTION & TRANSFER PUMP 768C TRACTOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP
TORQUE CONTROL GP
PUMP GP-FUEL PRIMING
GOVERNOR GP

TRACTOR 768C TRACTOR 02X
 768C TRACTOR 02X00400-UP (MACHINE) POWERED BY 3408 ENGINE SEBP2282 768C 02X   (1978)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
7N-4574 HOUSING AS-FUEL PUMP
 

#SEBP22820110
 

9Y-3764: FASTENER GP-FUEL INJ PUMP

9Y3764 FASTENER GP
PART OF 1011665 GOVERNOR, FUEL INJECTION & TRANSFER PUMP
c463745 SEBP2282
9Y3764 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [4] BOLT  
2. 3B-1915 [4] BOLT  
3. 0S-1571 [6] BOLT  
4. 0L-1143 [1] BOLT  
5. 053-2294 [1] BOLT-12 POINT HEAD  
 

#SEBP22820111
 

7W-0561: PUMP GP-FUEL INJECTION

7W0561 PUMP GP-FUEL INJECTION
PART OF 1011666 PUMP-FUEL INJECTION
c353004 SEBP2282
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK  
4. 7W-1927 [1] RING-RETAINER  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-GEAR  
7. 7N-1066 C [1] WASHER-RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22820112
 

7N-4574: HOUSING AS-FUEL PUMP

7N4574 HOUSING AS-PUMP
PART OF 1011666 PUMP-FUEL INJECTION
c301909 SEBP2282
7N4574 HOUSING AS-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 [2] BEARING-SLEEVE  
3. 5B-9318 [1] BALL  
4. 4N-0775 [2] DOWEL-HOLLOW  
5. 8L-6565 [1] PIN-SPRING  
6. 9S-4160 [2] BEARING-SLEEVE  
7. 4M-1474 [4] PIN-LIFTER GUIDE  
8. 9L-9766 [2] PIN-PLUNGER LIFT  
9. 6N-8441 [2] BEARING-SLEEVE  
10. 4N-0899 [1] DOWEL-HOLLOW  
11. 1P-0232 [8] BALL  
  1P-0234 [8] DOWEL  
12. 4N-0952 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22820113
 

4W-2922: GOVERNOR GP

4W2922 GOVERNOR GP-PART 1 OF 2
PART OF 1011665 GOVERNOR, FUEL INJECTION & TRANSFER PUMP
c549318 SEBP2282
4W2922 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
3. 8M-8403 [1] GUIDE-SPRING  
4. 7E-8940 C [1] BEARING-SLEEVE  
5. 7E-8941 C [1] BEARING-SLEEVE  
6. 8T-2604 [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT  
8. 9M-1974 C [5] WASHER-HARD  
9. 2B-2695 [1] BOLT  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT  
13. 1D-4540 [3] BOLT  
14. 1N-4656 [1] SHAFT-GOVERNOR CONTROL  
15. 9N-1917 [1] COVER AS-GOVERNOR  
16. 3P-0009 [1] INSULATOR-STUD  
17. 9N-1916 [1] LEVER-SHUT-OFF  
18. 5M-6228 [1] BEARING-NEEDLE  
19. 2A-0762 [2] BOLT  
20. 9N-2165 [1] LEVER-SOLENOID  
21. 1S-7336 [2] LOCK-BOLT  
22. 0S-1614 [2] BOLT  
23. 5P-0796 [2] SEAL-LIP TYPE  
24. 4N-0951 [1] SHAFT-SHUT-OFF  
25. 1S-7984 [1] BEARING-SLEEVE  
26. 1K-4703 [1] WASHER  
27. 7N-7325 [1] SCREW-ADJUSTING (LOW-IDLE)  
28. 2J-0157 [2] SEAL-O-RING  
29. 8H-9204 [2] WASHER-FELT  
30. 3S-1494 [1] SCREW-ADJUSTING (HIGH-IDLE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22820114
 

4W-2922: GOVERNOR GP

4W2922 GOVERNOR GP-PART 2 OF 2
4W2921-PAGE 82
PART OF 1011665 GOVERNOR, FUEL INJECTION & TRANSFER PUMP
c734441 SEBP2282
4W2922 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
31. 5L-8992 [1] COVER-ADJUSTMENT  
32. 5P-6945 [1] BOLT  
  4B-9747 [1] WASHER  
33. 8L-4155 [1] SETSCREW  
  9S-8748 [1] NUT-FULL  
34. 9M-4704 [1] BOLT  
35. 8L-4154 [1] COLLAR-LOAD STOP  
36. 7C-5279 C [1] COVER  
37. 4B-9365 C [2] BOLT  
  1B-4330 C [2] NUT  
  5P-0537 [4] WASHER  
38. 8L-3873 C [2] GASKET  
39. 2P-8669 [1] GASKET  
40. 2W-1491 [1] LEVER-CONTROL  
41. 9M-9788 [1] PLUNGER-STOP  
42. 7M-7316 [1] SPRING  
43. 5H-1351 [1] PIN-SPRING  
44. 2P-8679 [1] STRAINER AS  
45. 2P-8697 [1] GASKET  
46. 6N-3504 [1] SEAT-GOVERNOR SPRING  
47. 4N-1870 [1] GASKET-HOUSING  
48. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
49. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
   
50. 4W-2921 Y [1] PLATE GP-GOVERNOR ADAPTER  
51. 061-6708 [1] RING-RETAINING  
52. 6N-4158 [1] RING-GOVERNOR DRIVE  
53. 6N-4164 [1] SPRING  
54. 6N-4156 [1] RING-RETAINING  
55. 8H-9181 [1] SPRING-BUMPER  
56. 4W-7654 [1] BOLT  
57. 6N-8793 [1] SPRING  
58. 5L-8991 [1] GASKET-COVER  
59. 1B-9575 [1] BOLT  
60. 6N-4159 [1] DRIVE AS-GOVERNOR  
  2N-5626 [1] YOKE  
61. 6D-9953 [2] PIN-SPRING  
62. 6N-4460 [5] SPRING-LEAF  
63. 6N-4161 [1] COLLAR-GOVERNOR DRIVE  
  6N-4160 [1] PIN  
64. 3L-5987 CB [1] COVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22820115
 

4W-2921: PLATE GP-GOVERNOR ADAPTER

4W2921 PLATE GP-GOVERNOR ADAPTER
6N5314-PAGE 83
PART OF 4W2922 GOVERNOR
c642496 SEBP2282
4W2921 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4641 [1] RISER-GOVERNOR  
3. 1W-4640 [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-THRUST BEARING  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] LOCKRING  
8. 6N-7818 [1] LOCKRING  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING (23.47MM ID)  
11. 4W-2169 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BEARING-SLEEVE  
15. 4N-3702 [1] WASHER  
  8N-6579 [1] SPRING-GOVERNOR  
16. 4W-7653 [1] BOLT-GROUND BODY  
17. 6N-5314 Y [1] PISTON GP-GOVERNOR SERVO  
18. 9N-3323 [1] BRACKET AS-CONTROL  
  2S-7316 C [1] DOWEL  
19. 7W-7129 C [1] LEVER-RACK CONTROL  
20. 7N-2351 [1] PIN-CONTROL  
21. 034-4160 [2] BOLT-LOCKING (5/16-18X1.0IN)  
22. 8M-6393 [1] RING-RETAINING  
   
23. 6N-4157 [1] GEAR AS (42 TEETH)  
  7L-4993 [2] DOWEL  
24. 9L-6509 [1] WEIGHT AS-GOVERNOR  
25. 6H-9691 [1] SEAL-O-RING (2.9MM ID)  
26. 6N-8195 [1] RACE-THRUST  
27. 7N-7783 [1] SLEEVE-VALVE PILOT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22820116
 

6N-5314: PISTON GP-GOVERNOR SERVO

6N5314 PISTON GP-GOVERNOR SERVO
PART OF 4W2921 PLATE-GOVERNOR ADAPTER
c510121 SEBP2282
6N5314 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 [1] SLEEVE  
4. 8N-6978 [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22820117
 

7W-0641: TORQUE CONTROL GP

7W0641 CONTROL GP-TORQUE
PART OF 1011665 GOVERNOR, FUEL INJECTION & TRANSFER PUMP
c328142 SEBP2282
7W0641 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK-NUT  
3. 1P-6452 [1] INSULATOR  
4. 6N-8156 [1] SPRING-TORQUE  
5. 9L-5176 [1] SPRING-TORQUE  
6. 2S-7391 [1] BAR-STOP  
7. 6N-8451 [1] INSULATOR  
8. 8L-8601 [1] SPACER .05MM(.002IN)THK  
  7N-4012 [2] SPACER .30MM(.012IN)THK  
9. 7N-2279 [2] SPACER  
10. 8M-9062 [1] RETAINER-SPRING  
11. 4N-4218 [1] CONTACT  
12. 7N-4318 [1] SPACER  
13. 7N-1795 [2] SPACER  
 

#SEBP22820118
 

8N-7763: PUMP GP-FUEL PRIMING

8N7763 PUMP GP-FUEL PRIMING
c487998 SEBP2282
8N7763 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8389 [1] GASKET  
2. 1B-2790 [1] BOLT (5/16-18X1.375IN)  
  9M-1974 [1] WASHER  
    (8.8MM ID)
3. 7B-2742 [1] BOLT (1/4-20X1.25IN)  
  5P-0537 [1] WASHER  
    (7.2MM ID)
4. 2W-2605 [1] PUMP AS-PRIMING  
 

#SEBP22820119
 

6N-3195: DRIVE GP-GOVERNOR & FUEL PUMP

6N3195 DRIVE GP-GOVERNOR & FUEL PUMP
c541867 SEBP2282
6N3195 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 768C TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5793 [4] BOLT-12 POINT HEAD  
2. 6N-3927 [1] RETAINER  
3. 6N-5654 [1] FLANGE AS  
4. 6N-2533 [1] GEAR AS-ADVANCE (86 TEETH)  
5. 8H-0333 [2] PISTON  
6. 6N-2523 [2] SLIDE  
7. 6N-5156 [2] WEIGHT-ADVANCE  
8. 6N-0493 [1] RING  
9. 6N-3191 [2] SPRING (OUTER)  
10. 6N-3190 [2] SPRING (INNER)  
11. 6N-3189 [2] SPRING (MIDDLE)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Valve Mechanism Covers
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Valve Rocker Arms, Lifters And Bridges
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Automatic Timing Advance Unit
3408 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Injection Nozzles & Adapters
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pumps
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing & Governor
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzles (Direct Injection)
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Transfer Pump
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Automatic Timing Advance
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Pump Housing And Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Shutoff Solenoid
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Governor Control Cylinder
SUPPLEMENT FOR 768C TRACTOR & 769C TRUCK & 771C QUARRY TRUCK
Fuel Injection Valves (Precombustion)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles (Direct Injection - Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Nozzles And Adapters (Later)
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Transfer Pump
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Automatic Timing Advance
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE FOR 768C TRACTOR & 769C TRUCK
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Nozzle Adapters Used{1106}
1983/05/09
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Changes To Fuel Systems{1250,1251,1252,1253,1254,1100}
1985/03/25
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 768C :

101-1666 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
101-1666 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-GOV, FUEL INJ & TFR
101-1665 PUMP GP-GOV, FUEL INJ & TFR
VALVE & MOUNTING GP
101-3431 VALVE & MOUNTING GP
VALVE GP-SOLENOID
101-3430 VALVE GP-SOLENOID
CONTROL GP-GOVERNOR
9D-8905 CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
7N-4574 HOUSING AS-FUEL PUMP
GOVERNOR GP
4W-2922 GOVERNOR GP
4W-2922 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
TORQUE CONTROL GP
7W-0641 TORQUE CONTROL GP
PUMP GP-FUEL PRIMING
8N-7763 PUMP GP-FUEL PRIMING

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.