AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5Y-2571 TACHOMETER GP-ELECTRIC S/N 2DJ1566-UP PART OF 111-2383 CHASSIS AR D4E SR TRACK-TYPE TRACTOR


OPERATOR STATION
TACHOMETER GP
WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

TRACK-TYPE TRACTOR D4E SR TRACK-TYPE TRACTOR 2DJ
 D4E SR Track-Type Tractor Direct Drive 2DJ01400-UP (MACHINE) POWERED BY 3304 Engine SEBP2286 D4E SR 2DJ   (1989)

OPERATOR STATION

TACHOMETER GP
TACHOMETER GP-ELECTRIC
5Y-2571 TACHOMETER GP-ELECTRIC
TACHOMETER GP-ELECTRIC
5Y-2571 TACHOMETER GP-ELECTRIC
 

#SEBP22860280
 

5Y-2571: TACHOMETER GP-ELECTRIC

5Y-2571 TACHOMETER GP-ELECTRIC
S/N 2DJ1566-UP
PART OF 111-2383 CHASSIS AR
i01174724 SEBP2286
5Y2571 TACHOMETER GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3148 [1] TACHOMETER AS  
2. 3E-7886 C [1] SENSOR GP-SPEED  
3. 7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
4. 1V-6341 [1] SEAL  
5. 8E-7950 [1] HARNESS AS  
6. 5D-0019 [1] LAMP (24-VOLT)  
7. 8E-7969 [1] WIRE AS  
  9G-7069 [1] SOCKET AS-LAMP  
  6D-4161 [1] CONTACT  
8. 8E-7967 [1] WIRE AS  
  031-5637 [1] HOLDER-FUSE  
  033-3672 [1] FUSE (5-AMPERE)(5 AMP)  
9. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
10. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 7K-1181 [3] STRAP-CABLE  
12. 3T-3048 [1] CLIP AS  
13. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22860281
 

111-3354: BLADE GP

111-3354 BLADE GP
S/N 9KH1-UP
PART OF 112-1495, 112-1496 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00478839 SEBP2286
1113354 BLADE GP Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-3355 [1] BLADE AS  
  111-3356 [1] MOLDBOARD AS  
2. 6J-2444 [1] PLATE (LH)  
3. 6J-2448 [1] PLATE AS  
4. 6J-2446 [1] SHOE-TRACK  
5. 6J-2443 [1] PLATE (RH)  
6. 6J-2447 [1] PLATE AS  
7. 6J-2445 [1] SHOE-TRACK  
8. 2J-1075 [4] BRACKET  
9. 4H-6984 [4] BEARING  
10. 2J-1070 [1] BRACKET  
11. 5J-4982 [2] REINFORCEMENT  
12. 7J-2777 Y [1] EDGE GP-BIT & CUTTING  
13. 2J-1067 [1] PIN  
14. 4F-0255 [1] PIN  
  3B-4627 [1] PIN-COTTER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22860282
 

2J-1136: BLADE GP-ANGLING

2J-1136 BLADE GP-ANGLING
S/N 33R2820-UP
PART OF 2Y-4043, 2Y-9139 BULLDOZER AR-ANGLING
AN ATTACHMENT
i00355457 SEBP2286
2J1136 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-1093 [1] BLADE AS-ANGLING  
  [1] MOLDBOARD AS  
2. 6J-2444 [1] PLATE (LH)  
3. 6J-2448 [1] PLATE AS  
4. 6J-2446 [1] SHOE-TRACK  
5. 6J-2443 [1] PLATE (RH)  
6. 6J-2447 [1] PLATE AS  
7. 6J-2445 [1] SHOE-TRACK  
8. 2J-1075 [4] BRACKET  
9. 4H-6984 [4] BEARING  
10. 2J-1070 [1] BRACKET  
11. 5J-6942 [1] BIT-END  
12. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
13. 4K-0367 [23] NUT-FULL (5/8-11-THD)  
14. 4F-0255 [1] PIN  
  3B-4626 [1] PIN-COTTER  
15. 2J-1067 [1] PIN  
16. 8J-1490 C [2] EDGE-CUTTING (END)  
  8J-1489 C [1] EDGE-CUTTING (CENTER)  
17. 5J-6941 [1] BIT-END  
18. 3F-5108 [17] BOLT-PLOW (5/8-11X2.25-IN)(57.15MM LG)  
    -OR-
  4F-3654 [17] BOLT-PLOW (5/8-11X2-IN)(50.8MM LG)  
  2M-6831 AF [1] PLATE-NUMBER  
  4B-4159 AF [2] SCREW-DRIVE (NO 4X5/16-IN)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP22860283
 

7J-2777: EDGE GP-BIT & CUTTING

7J-2777 EDGE GP-BIT & CUTTING
S/N 9KH1-UP
PART OF 111-3354 BLADE GP
AN ATTACHMENT
i00405985 SEBP2286
7J2777 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [23] BOLT-PLOW (5/8-11X2.25-IN)  
  4K-0367 [23] NUT-FULL (5/8-11-THD)  
2. 4T-3006 [1] EDGE-CUTTING  
  4T-3005 [2] EDGE-CUTTING  
3. 4T-3043 [1] BIT-END  
  4T-3044 [1] BIT-END  
 

#SEBP22860284
 

8V-3092: MOUNTING GP-RIPPER

8V-3092 MOUNTING GP-RIPPER
S/N 91X1-UP
PART OF 3G-7349 RIPPER AR
Type 1
AN ATTACHMENT
i00430629 SEBP2286
8V3092 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-5347 [1] BAR  
2. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
3. 7F-5227 C [8] BOLT (3/4-10X3.75-IN)  
4. 8V-3089 [1] PLATE AS  
5. 1A-5666 [8] NUT-FULL (7/8-14-THD)  
6. 5P-8249 [12] WASHER-HARD (24X41.5X4-MM THK)  
7. 3K-7776 [8] STUD-TAPERLOCK  
8. 0L-1178 [4] BOLT (3/4-10X2-IN)  
9. 5H-7902 [2] SCREW-LOCK  
10. 4K-6782 [1] BRACKET  
11. 4K-6313 [1] PIN  
12. 3G-7463 [1] DRAWBAR AS  
13. 8J-7008 [2] PIN  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 8S-9191 [2] BOLT (3/8-16X4-IN)  
16. 4K-3150 [2] PIN  
17. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
18. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
19. 1D-4609 [10] BOLT (3/4-10X3-IN)  
20. 5P-8248 [38] WASHER-HARD (20X36.5X3.5-MM THK)  
21. 2J-3506 [18] NUT-FULL (3/4-10-THD)  
22. 1M-4980 [1] PIN-DRAWBAR  
23. 3B-5318 [1] PIN-COTTER  
24. 6V-8199 C [2] BOLT (3/4-10X5.25-IN)  
25. 2Y-5998 [1] PLATE AS  
26. 1D-4630 [4] BOLT (7/8-9X4-IN)  
27. 4K-0367 [8] NUT-FULL (5/8-11-THD)  
28. 3G-7466 [2] PLATE AS  
29. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
30. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
31. 9P-6890 C [2] PLATE AS  
32. 3K-2409 B [1] SHIM (1.52MM)  
33. 4K-8696 B [4] SHIM (.39MM THK)  
34. 4K-8690 B [16] SHIM (.38MM THK)  
35. 2K-5384 B [4] SHIM (1.52MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22860285
 

8V-3092: MOUNTING GP-RIPPER

8V-3092 MOUNTING GP-RIPPER
S/N 91X1-UP
PART OF 3G-7349 RIPPER AR
Type 2
AN ATTACHMENT
i01175158 SEBP2286
8V3092 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-5347 C [1] BAR  
2. 1A-2029 C [2] BOLT (3/8-16X1.125-IN)  
3. 1D-4612 C [8] BOLT (3/4-10X4-IN)  
4. 8V-3089 C [1] PLATE AS  
5. 2J-3505 C [8] NUT-FULL (7/8-9-THD)  
6. 5P-8249 C [12] WASHER-HARD (24X41.5X4-MM THK)  
7. 2D-8156 C [8] STUD-TAPERLOCK  
8. 0L-1178 [4] BOLT (3/4-10X2-IN)  
9. 5H-7902 [2] SCREW-LOCK  
10. 4K-6782 [1] BRACKET  
11. 4K-6313 [1] PIN  
12. 3G-7463 C [1] DRAWBAR AS  
13. 8J-7008 [2] PIN  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 8S-9191 [2] BOLT (3/8-16X4-IN)  
16. 4K-3150 [2] PIN  
17. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
18. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
19. 1D-4609 [10] BOLT (3/4-10X3-IN)  
20. 5P-8248 [38] WASHER-HARD (20X36.5X3.5-MM THK)  
21. 2J-3506 C [18] NUT-FULL (3/4-10-THD)  
22. 1M-4980 [1] PIN-DRAWBAR  
23. 3B-5318 [1] PIN-COTTER  
24. 6V-8199 C [2] BOLT (3/4-10X5.25-IN)  
25. 2Y-5998 C [1] PLATE AS  
26. 1D-4630 C [4] BOLT (7/8-9X4-IN)  
27. 4K-0367 C [8] NUT-FULL (5/8-11-THD)  
28. 3G-7466 [2] PLATE AS  
29. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
30. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
31. 9P-6890 C [2] PLATE AS  
32. 3K-2409 BC [1] SHIM (1.52MM)  
33. 4K-8696 BC [4] SHIM (.39MM THK)  
34. 4K-8690 BC [16] SHIM (.38MM THK)  
35. 2K-5384 BC [4] SHIM (1.52MM)  
  4L-6454 C [2] BOLT (3/8-16X1-IN)  
  8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22860286
 

3G-7349: RIPPER AR

3G-7349 RIPPER AR
S/N 91X1-UP
CANNOT BE USED WITH HITCH
AN ATTACHMENT
i00524866 SEBP2286
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3G-5189 Y [1] CYLINDER GP-RIPPER  
  3G-7474 Y [1] LINES GP-RIPPER  
  8V-3092 Y [1] MOUNTING GP-RIPPER  
  3G-7177 Y [1] RIPPER GP  
  2Y-9790 [1] PLATE-SERIAL NUMBER  
  4B-4158 [1] SCREW-DRIVE (NO 4X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22860287
 

3G-7177: RIPPER GP

3G-7177 RIPPER GP
S/N 91X1-UP
PART OF 3G-7349 RIPPER AR
AN ATTACHMENT
i00365153 SEBP2286
3G7177 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-7178 [1] CARRIAGE AS  
2. 4K-6302 [5] HOLDER-BIT  
3. 6K-3961 [2] BOSS  
4. 8S-9191 [2] BOLT (3/8-16X4-IN)  
5. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
6. 2B-0947 [8] BOLT (1/2-13X2.25-IN)  
7. 1F-7958 [8] NUT-FULL (1/2-13-THD)  
8. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
9. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
10. 3G-6962 [2] LINK-UPPER  
11. 2K-0120 [1] PIN  
12. 2K-0703 [1] BAR  
13. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
14. 4K-3150 [2] PIN  
15. 4K-9923 [1] LINK AS-LOWER  
16. 2K-4233 [8] BOSS  
17. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
18. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
19. 8J-7008 [2] PIN  
20. 2B-2006 [2] BOLT (1/2-13X4.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22860288
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N 91X1-UP
PART OF 3G-7177 RIPPER GP
AN ATTACHMENT
i00125368 SEBP2286
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER (PENETRATION)  
6. 114-0359 [1] RETAINER AS  
 

#SEBP22860289
 

110-9032: FILM GP

110-9032 FILM GP
S/N 2DJ1400-UP
PART OF 5Y-1900 PLATE & FILM GP
i00473498 SEBP2286
1109032 FILM GP Parts scheme
  For full view, you need register

Parts for your D4E SR TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-7376 [1] FILM-IDENTIFICATION (CATERPILLAR)  
2. 5Y-2530 [1] FILM-STRIPE  
3. 5Y-2532 [1] FILM-IDENTIFICATION (CAT, RH)  
  5Y-2531 [1] FILM-IDENTIFICATION (CAT, LH)  
4. 110-9030 [1] FILM-IDENTIFICATION  
  110-9031 [1] FILM-IDENTIFICATION  
 

Information:

Caterpillar Parts SIS Catalog D4E SR :

TACHOMETER GP-ELECTRIC
5Y-2571 TACHOMETER GP-ELECTRIC
SUSPENSION GP-SEAT
9C-7161 SUSPENSION GP-SEAT
9C-3696 SEAT GP-SUSPENSION
SEAT GP
9C-7773 SEAT GP
SEAT BELT GP
8Y-4029 SEAT BELT GP
SEAT & SUPPORT GP
115-3579 SEAT & SUPPORT GP
METER GP-SERVICE
8P-4957 METER GP-SERVICE
HANDHOLD GP
4V-0025 HANDHOLD GP
BLADE GP
111-3354 BLADE GP
BLADE GP-ANGLING
2J-1136 BLADE GP-ANGLING
EDGE GP-BIT & CUTTING
7J-2777 EDGE GP-BIT & CUTTING
MOUNTING GP-RIPPER
8V-3092 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
8V-3092 MOUNTING GP-RIPPER
3G-7349 RIPPER AR
RIPPER GP
3G-7177 RIPPER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER

Truck sale:

1997 CAT D4E SR
USD $38,508 
1997 CAT D4E SR

Birmaq
São José Dos Pinhais, PARANA, Brazil
1995 CAT D4E SR
USD $28,970 
1995 CAT D4E SR

Alipio Maquinas
Belo Horizonte, MG, Brazil
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.