AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W2108 COVER GP-CYLINDER BLOCK 322 LN EXCAVATOR


BASIC ENGINE
CYLINDER BLOCK GP
CARRIER GP-SEAL
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

EXCAVATOR 322 LN EXCAVATOR 4RM
 322 L, 322 LN AND 322 N EXCAVATORS 4RM00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2287 322 LN 4RM   (2010)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
 

#SEBP22870010
 

4W-2108: COVER GP-CYLINDER BLOCK

4W2108 COVER GP-CYLINDER BLOCK
c580979 SEBP2287
4W2108 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [10] BOLT  
2. 9M-1974 [20] WASHER-HARD  
3. 7W-3872 [6] SLEEVE  
4. 7W-3871 [3] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 4F-9653 [1] SEAL-O-RING (LARGE)  
7. 6V-5217 M [10] BOLT  
8. 2W-6544 [1] COVER  
9. 9S-4191 [3] PLUG-O-RING  
10. 3J-1907 [3] SEAL-O-RING (SMALL)  
11. 9Y-0747 [1] MANIFOLD-OIL  
12. 6V-5842 M [2] BOLT  
13. 6V-5839 [2] WASHER  
14. 6V-2317 BM [2] BOLT  
  9M-1974 [2] WASHER-HARD  
15. 6V-5217 BM [1] BOLT  
  9M-1974 [1] WASHER-HARD  
16. 110-7618 [4] BOLT AS  
17. 1U-8846 LIQUID GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22870011
 

4W-3462: CARRIER GP-SEAL

4W3462 CARRIER GP-SEAL
c602059 SEBP2287
4W3462 CARRIER GP-SEAL Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3940 M [8] BOLT (M8X1.25X25MM)  
2. 9M-1974 [8] WASHER-HARD (2MM THK)  
3. 2W-6546 [1] COVER  
4. 1U-8846 B GASKET-LIQUID  
5. 6V-3538 [2] DOWEL (20MM(.78IN)LG)  
6. 8C-3091 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22870012
 

7L-0004: COVER GP-FRONT HOUSING

7L0004 COVER GP-FRONT
c596223 SEBP2287
7L0004 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0100 CM [2] BOLT  
2. 106-7920 C [1] COVER AS-FRONT  
3. 6V-2317 CM [10] BOLT  
4. 9Y-4634 [1] GASKET-POWER TAKE-OFF  
5. 6V-8336 M [2] BOLT  
6. 6V-8149 M [2] NUT  
7. 5P-8245 [4] WASHER  
8. 7W-6552 [1] GASKET  
9. 4W-2026 [1] COVER  
10. 6V-2317 BM [2] BOLT (LOCATION A)  
11. 1U-8846 B GASKET-LIQUID  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22870013
 

9Y-7620: COVER GP-VALVE MECHANISM

9Y7620 COVER GP-VALVE MECHANISM
c607376 SEBP2287
9Y7620 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET  
2. 6V-2315 M [14] BOLT (M6X1.0X35MM)  
3. 119-2961 [1] COVER  
4. 5P-0537 [14] WASHER (2MM THK)  
5. 2W-6225 [1] CAP AS-OIL FILLER  
  M   METRIC PART
 

#SEBP22870014
 

4W-2197: CRANKSHAFT GP

4W2197 CRANKSHAFT GP
c728172 SEBP2287
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-5658 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS - 0.5-MM US)  
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE
    IS USED ONLY TO
    SALVAGE (REPAIR) THE
    REAR SEAL SURFACE
    OF THE CRANKSHAFT)
    AVAILABLE REPAIR KIT(S):
  196-9519 [1] BEARING GP-MAIN (CRANKSHAFT)  
    (INCLUDES A COMPLETE SET OF STANDARD MAIN AND THRUST BEARINGS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP22870015
 

7C-5826: CYLINDER BLOCK GP

7C5826 CYLINDER BLOCK GP
PART OF 7E2482 CYLINDER BLOCK
c537336 SEBP2287
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
   
  7C-6208 AF [1] SLEEVE-CYLINDER  
    FOR SALVAGE OF DAMAGED
    CYL. BORES IN BLOCK.
    QUANTITY TO BE
    DETERMINED BY USER.
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP22870016
 

100-4948: CYLINDER BLOCK GP

1004948 CYLINDER BLOCK GP
PART OF 7E2482 CYLINDER BLOCK
c565983 SEBP2287
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
  M   METRIC PART
 

#SEBP22870017
 

129-1095: CYLINDER BLOCK GP

1291095 CYLINDER BLOCK GP
PART OF 7E2482 CYLINDER BLOCK
c625322 SEBP2287
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT  
4. 5P-8247 [14] WASHER-HARD  
5. 9S-8005 [1] PLUG-O-RING  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BEARING-SLEEVE  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG-O-RING  
10. 8T-0293 M [2] BOLT  
11. 6F-7062 [2] WASHER  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG-O-RING  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP22870018
 

7E-2482: CYLINDER BLOCK GP

7E2482 CYLINDER BLOCK GP*R
ENGINE S/N 4TF11600-23954
7C5826-PAGE 12
c537301 SEBP2287
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 Y [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT  
6. 1W-8407 [2] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22870019
 

7E-2482: CYLINDER BLOCK GP

7E2482 CYLINDER BLOCK GP*R
ENGINE S/N 4TF23955-28600
1004948-PAGE 12.01
c607754 SEBP2287
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 322 LN EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL (20MM(.78IN)LG)  
3. 4P-5651 [6] TUBE AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Blowby Values On 3114/3116/3126 Gosselies Built Vehicle Application Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
2000/01/31

Caterpillar Parts SIS Catalog 322 LN :

CAMSHAFT GP
2W-9608 CAMSHAFT GP
BRACKET GP-ENGINE
6C-6614 BRACKET GP-ENGINE
133-8856 ENGINE AR
133-8856 ENGINE AR
113-1724 ENGINE AR-COMPLETE
113-1724 ENGINE AR-COMPLETE
117-7689 ENGINE AR
117-7690 ENGINE AR
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP

Truck sale:

1995 CAT 322LN
Call 
1995 CAT 322LN

Balavto
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.