AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I2260 TURBOCHARGER GP*R 6I2269-PAGE 42 PART OF 6I2267 TURBOCHARGER 325-A EXCAVATOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
GOVERNOR GP
FILTER GP-FUEL

EXCAVATOR 325-A EXCAVATOR 6RM
 325, 325L EXCAVATOR 6RM00001-UP (MACHINE) POWERED BY 3116 ENGINE SEBP2291 325-A 6RM   (1993)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
7C-2476 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
6I-2269 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
6I-2260 TURBOCHARGER GP
TURBOCHARGER GP
6I-2267 TURBOCHARGER GP
 

#SEBP22910080
 

6I-2260: TURBOCHARGER GP

6I2260 TURBOCHARGER GP*R
6I2269-PAGE 42
PART OF 6I2267 TURBOCHARGER
c565917 SEBP2291
6I2260 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4795 [1] NAMEPLATE  
2. 6I-2269 YR [1] CARTRIDGE GP-TURBOCHARGER  
3. 6I-2262 [1] HOUSING-COMPRESSOR  
4. 6I-2261 [1] HOUSING-TURBINE  
5. 6I-2255 [3] PLATE  
6. 6I-2257 [1] CLAMP  
7. 7X-2536 M [6] BOLT  
8. 8H-3710 [1] SCREW-TAPPING  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22910081
 

6I-2267: TURBOCHARGER GP

6I2267 TURBOCHARGER GP
6I2260-PAGE 50
c640653 SEBP2291
6I2267 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2260 RY [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT  
3. 7C-7431 [1] GASKET-TURBOCHARGER  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22910082
 

7W-6989: CONTROL GP-FUEL INJECTION

7W6989 CONTROL GP-FUEL INJECTION
ENGINE S/N 98Z4000-7746
c619042 SEBP2291
7W6989 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-7459 [1] CONTROL AS  
  ZM [6] NUT (M4X0.7 THD)  
  ZM [4] SCREW-BUTTON HEAD  
    (M4X0.7X10MM)
  ZM [5] SETSCREW-SOCKET  
  ZM [7] BOLT-SOCKET HEAD  
    (M4X0.7X20MM)
  Z [2] RING-RETAINING  
  ZM [1] SETSCREW  
    (POWER SETTING)
2. 6V-5683 M [4] BOLT (M6X1X16MM)  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP22910083
 

105-1695: CONTROL GP-FUEL INJECTION

1051695 CONTROL GP-FUEL INJECTION
ENGINE S/N 98Z7747-UP
c617598 SEBP2291
1051695 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-7459 [1] CONTROL AS  
  5C-8312 ZM [6] NUT (M4X0.7 THD)  
  6V-5698 ZM [4] SCREW-BUTTON HEAD (M4X0.7X10MM)  
  7X-7889 ZM [5] SETSCREW-SOCKET  
  8C-4982 ZM [7] BOLT-SOCKET HEAD (M4X0.7X20 MM)  
  8T-7564 Z [2] RING-RETAINING  
  102-7455 ZM [1] SETSCREW  
2. 6V-5683 M [4] BOLT (M6X1X16MM)  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP22910084
 

114-1956: CONTROL GP-GOVERNOR

1141956 CONTROL GP-GOVERNOR
c574503 SEBP2291
1141956 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-9154 [1] CLIP  
2. 8T-4224 [7] WASHER-HARD  
3. 6D-4246 [2] CLIP  
4. 8T-4189 M [5] BOLT  
5. 7Y-8170 [1] GROMMET  
6. 7Y-5478 [1] COVER AS  
7. 106-0100 [1] MOTOR AS-GOVERNOR  
8. 106-0070 [1] SPRING  
9. 8T-4121 [4] WASHER  
10. 8T-4191 M [4] BOLT  
11. 5C-7261 M [1] NUT  
12. 9X-8256 [2] WASHER  
13. 102-8046 [1] LEVER AS  
14. 8T-4138 M [2] BOLT  
  M   METRIC PART
 

#SEBP22910085
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E8794 DRIVE GP-GOVERNOR & TRANSFER PUMP
PART OF 6I4267 GOVERNOR-UNIT INJECTOR
c572096 SEBP2291
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUT-OFF  
  4P-9489 [1] SHAFT-SHUT OFF  
  4P-9491 [1] SHIM-SHUT OFF  
  4P-9492 [1] BRACKET-SHAFT  
  4P-9493 [1] LEVER-SHUT OFF  
  4P-9494 [1] SPRING-SHUT OFF  
  105-0585 [1] LEVER-SHUT-OFF  
  9X-8902 M [4] BOLT-SOCKET HEAD  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7E-9898 [1] CONNECTOR-ORIFICE  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATING  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP22910086
 

7W-4812: FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
PART OF 7E7660 & 1260457 GOVERNOR-UNIT INJECTOR
c476378 SEBP2291
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 JC [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 M [3] BOLT  
4. 9Y-5295 C [1] TUBE-GOVERNOR CONNECTION  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
   
    J-INSTALL SLEEVE
    IN FRONT HOUSING
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22910087
 

6I-2693: FILTER GP-FUEL

6I2693 FILTER GP-FUEL
c589546 SEBP2291
6I2693 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [1] WASHER-HARD  
2. 6V-9607 MB [1] BOLT  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT  
6. 1R-0751 [1] FILTER AS-FUEL  
7. 9S-4191 [1] PLUG-O-RING  
8. 6I-4802 C [1] BASE AS  
9. 6I-4801 C [1] INSERT-FILTER  
10. 9M-1974 [3] WASHER-HARD  
11. 6V-9607 M [1] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP22910088
 

104-1755: FILTER GP-SECONDARY FUEL

1041755 FILTER GP-SECONDARY
AN ATTACHMENT
c575290 SEBP2291
1041755 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0740 [1] FILTER AS-FUEL  
2. 8T-4138 M [1] BOLT  
3. 9X-8256 [2] WASHER  
4. 5C-2890 M [1] NUT  
5. 2V-3216 [1] CLIP  
6. 103-6174 [1] TUBE AS  
7. 6V-8397 [6] SEAL-O-RING  
8. 9C-7323 I [1] HOSE AS  
9. 104-1734 [1] HOSE AS  
10. 6V-8724 [1] ELBOW  
11. 8T-5043 [1] CONNECTOR  
12. 8T-2556 [1] TEE-FACE SEAL  
13. 3J-1907 [2] SEAL-O-RING  
14. 2T-2310 [1] CONNECTOR-O-RING  
15. 103-6175 [1] BRACKET  
16. 9M-1974 [5] WASHER-HARD  
17. 6V-2317 M [2] BOLT  
18. 5P-7970 M [2] NUT  
19. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW  
20. 6N-4414 [1] COVER-FILTER BASE  
21. 1P-0436 [1] GASKET  
22. 7B-2742 [1] BOLT  
23. 5P-0537 [1] WASHER  
24. 1B-2790 [1] BOLT  
25. 5P-1442 E HOSE  
26. 1J-9671 [1] SEAL-O-RING  
27. 8T-4137 M [2] BOLT  
28. 8T-4121 [2] WASHER  
29. 8T-4224 [1] WASHER-HARD  
30. 8T-4189 M [1] BOLT  
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP22910089
 

119-2980: FILTER & LINES GP-FUEL

1192980 FILTER & LINES GP-FUEL
1418288-PAGE 79.01
c727301 SEBP2291
1192980 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [2] BOLT (M8X1.25X30MM)  
2. 5F-7054 [1] SEAL-O-RING (18.6MM ID)  
3. 4P-9696 [1] TUBE AS  
4. 6V-6317 M [2] BOLT (M10X1.50X20MM)  
5. 6V-5839 [2] WASHER (2.5MM THK)  
6. 7E-5189 [1] VALVE-REGULATOR  
7. 5P-7813 [1] SEAL-O-RING (7.65MM ID)  
8. 3N-3252 [1] SPRING (.406IN OD)  
9. 8T-0151 [1] ADAPTER  
10. 3J-1907 [14] SEAL-O-RING (11.89MM ID)  
11. 115-4184 [1] TEE-O-RING PORT  
12. 6V-9607 M [2] BOLT (M8X1.25X120MM)  
13. 1R-0751 [1] FILTER AS-FUEL  
14. 5P-4961 [4] CLAMP-HOSE  
15. 119-2955 [1] CLIP  
16. 1B-7182 [1] BOLT (5/16-18X1.25IN)  
17. 9M-1974 [10] WASHER-HARD (2MM THK)  
18. 6N-4414 [1] COVER-FILTER BASE  
19. 7B-2742 [1] BOLT (1/4-20X1.25IN)  
20. 5P-0537 [1] WASHER  
21. 1P-0436 [1] GASKET  
22. 068-9526 [1] CAP-TUBE  
23. 5C-7261 M [1] NUT (M8X1.25 THD)  
24. 3S-2093 [1] STRAP-CABLE  
25. 9X-2099 [1] STUD-BOLT  
26. 6V-8397 [7] SEAL-O-RING (9.27MM ID)  
27. 115-4233 [1] TUBE AS  
28. 5P-1046 [1] CONNECTOR  
29. 141-8288 Y [1] VALVE GP-RELIEF  
30. 6V-8774 [1] TEE  
31. 8T-0788 [1] ELBOW-90 DEGREE  
32. 9S-4191 [2] PLUG-O-RING (9/16-18 THD)  
33. 8T-4189 M [2] BOLT (M8X1.25X20MM)  
34. 8T-4224 [2] WASHER-HARD (2MM THK)  
35. 1R-0753 [1] FILTER AS-FUEL  
36. 5P-1318 [1] ADAPTER  
37. 129-1105 [1] BRACKET  
38. 8T-4137 M [2] BOLT (M10X1.50X20MM)  
39. 8T-4121 [2] WASHER (2.5MM THK)  
40. 6V-2317 M [2] BOLT (M8X1.25X30MM)  
41. 5P-7970 M [2] NUT (M8X1.25 THD)  
42. 6V-8724 [1] ELBOW (9/16-18 THD)  
43. 8X-9255 I [1] HOSE AS  
44. 119-2978 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
45. 7X-2459 [2] TEE  
46. 3E-7410 [1] TEE-O-RING  
47. 8C-6867 [2] CONNECTOR  
48. 129-1090 [2] VALVE  
49. 003-7764 [2] END-HOSE  
50. 6V-8636 [1] CONNECTOR  
51. 112-9445 I [1] HOSE AS  
52. 4K-8864 [1] CLIP (14.2MM ID)  
53. 5P-1442 E HOSE (78 CM)  
54. 8L-5449 [1] SPACER  
55. 6V-5219 M [1] BOLT (M8X1.25X40MM)  
56. 1J-9671 [1] SEAL-O-RING (10.52MM ID)  
57. 6I-4802 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER  
58. 7C-1159 [1] GASKET  
59. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
60. 119-6764 [1] CLIP-LOOP  
61. 6V-5215 M [1] BOLT (M8X1.25X16MM)  
62. 3E-4352 [1] WASHER-HARD (2.5MM THK)  
63. 096-0061 [1] STRAP-CABLE  
64. 103-2529 BE HOSE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Testing and Adjusting
Turbocharger - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Turbocharger
SUPPLEMENT FOR 3116 ENGINE 325, 325L, & 325N EXCAVATORS
Turbocharger - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Turbocharger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 325-A :

MUFFLER GP
7Y-1534 MUFFLER GP
MOUNTING GP-AIR CLEANER
7Y-0379 MOUNTING GP-AIR CLEANER
MANIFOLD GP-INLET
4W-3480 MANIFOLD GP-INLET
MANIFOLD GP-EXHAUST
6I-2298 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
7C-2472 MANIFOLD GP-EXHAUST
LINES GP-DRAIN
7Y-1536 LINES GP-DRAIN
LINES GP-AIR
7Y-1284 LINES GP-AIR
LINES GP-AIR
7C-6213 LINES GP-AIR
TURBOCHARGER GP
6I-2267 TURBOCHARGER GP
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
114-1956 CONTROL GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
FILTER GP-SECONDARY FUEL
104-1755 FILTER GP-SECONDARY FUEL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.