7N-2879 PULLEY GP-CRANKSHAFT S/N 6NC1-UP; 08Z75500-UP PART OF 118-9730, 9Y-4134 ENGINE AR 330-A EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	4W-0452	[1]	SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)(REAR)
2.	362-8853 J	[1]	SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)(FRONT)
			-OR-
	9Y-9895	[1]	SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)(FRONT)
	J		HEAVY DUTY SEAL THAT IMPROVES AGAINST CONTAMINATION

#SEBP22920062

4P-5817: SUPPORT GP-ENGINE

SUPPORT GP-ENGINE

4P-5817 SUPPORT GP-ENGINE
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR

i00384446 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1585	[6]	BOLT (1/2-13X1.5-IN)
2.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	4P-5806	[1]	SUPPORT AS-ENGINE

#SEBP22920063

8N-0107: TRUNNION GP-ENGINE

TRUNNION GP-ENGINE

8N-0107 TRUNNION GP-ENGINE
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR

i00157293 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0105	[1]	TRUNNION AS
	2P-1487	[1]	RING
2.	0L-1329 C	[6]	BOLT (1/2-13X3-IN)
3.	2P-1692	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE

#SEBP22920064

7C-7013: VALVE MECHANISM GP

VALVE MECHANISM GP

7C-7013 VALVE MECHANISM GP
S/N 6NC1-UP; 08Z75500-UP
ADDITIONAL CYLINDER HEAD FASTENER BOLTS AND WASHERS CAN BE FOUND IN 7N-9536.
PART OF 7N-8026 VALVE MECHANISM GP

i00122276 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-7012	[1]	SHAFT AS
	3K-8460	[1]	PLUG (1/2-20-THD)
	5M-4606	[1]	DOWEL
	7C-7011	[1]	BRACKET-SHAFT
	8N-3251	[1]	SHAFT-ROCKER ARM
	6V-3508	[2]	PLUG-CUP
2.	5S-5879	[4]	BRACKET-SHAFT
3.	4B-4910	[5]	SPRING
5.	8N-3327	[6]	ROCKER ARM GP (INLET)
6.	8S-1499	[1]	BRACKET AS
	1L-5072	[1]	DOWEL
7.	8N-3325	[6]	ROCKER ARM GP (EXHAUST)
8.	9M-9886	[13]	WASHER (31.75X19.05X0.08-MM THK)
9.	7N-0550	[2]	WASHER-SPRING
10.	9H-1113	[2]	RING-RETAINING
11.	8M-4448	[1]	SEAL-O-RING
12.	1B-7709	[1]	BOLT (5/8-11X8-IN)
13.	2S-0736	[1]	WASHER-HARD (17X27X3.5-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP22920065

7N-8026: VALVE MECHANISM GP

VALVE MECHANISM GP

7N-8026 VALVE MECHANISM GP
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR

i00122392 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-7013 CY	[1]	VALVE MECHANISM GP
2.	7S-3161	[12]	LIFTER-VALVE
3.	5S-5918	[12]	PUSHROD-VALVE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP22920066

4P-8455: BASE GP-OIL FILTER

BASE GP-OIL FILTER

4P-8455 BASE GP-OIL FILTER
S/N 6NC1-UP; 08Z75500-UP
PART OF 6I-0717 COOLER GP-FLTR BASE & ENG OIL

i00157139 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-7149	[1]	BASE AS-OIL FILTER
	3B-0645	[3]	PLUG-CUP
2.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
3.	2P-2537	[1]	STUD-HOLLOW
4.	1P-1367	[2]	PLUNGER (RELIEF VALVE)
5.	2B-2694	[1]	BOLT (5/16-18X2-IN)
6.	8C-3445	[1]	CAP-DUST (ENGINE OIL SAMPLING VALVE)
	3J-7354	[1]	SEAL-O-RING
	8C-3446	[1]	VALVE-SAMPLING (ENGINE OIL)
7.	9Y-6860	[1]	GASKET
8.	1B-2790	[2]	BOLT (5/16-18X1.375-IN)
9.	8M-3182	[2]	SPRING
10.	1B-9575	[1]	BOLT (5/16-18X1.56-IN)
11.	4P-8453	[1]	COVER

#SEBP22920067

1P-4244: BREATHER GP

BREATHER GP

1P-4244 BREATHER GP
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR

i00121939 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3H-3243	[1]	BOLT (5/16-18X4.75-IN)
2.	9N-0869	[1]	WASHER-HARD (8.8X25.5X2-MM THK)
3.	2W-9162 C	[1]	BREATHER AS (CRANKCASE)
4.	8H-2046 C	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE

#SEBP22920068

7Y-1302: BREATHER GP

BREATHER GP

7Y-1302 BREATHER GP
S/N 2ZM1-UP; 5YM1-UP
PART OF 131-8673, 7Y-0865 INSTALLATION AR-ENGINE

i00423733 SEBP2292

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-1359	[1]	HOSE
2.	095-9785	[3]	CLAMP-HOSE
3.	7Y-1419	[1]	TUBE AS
4.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
5.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	7Y-1418 E		HOSE (50 CM)
7.	8T-4956 M	[1]	BOLT (M12X1.75X35-MM)
8.	8T-4244 M	[1]	NUT (M12X1.75-THD)
9.	8T-9393	[2]	BOLT (5/8-11X1.5-IN)
10.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
11.	4I-7448	[1]	PLATE
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP22920069

9Y-6105: GAUGE GP-OIL LEVEL (DIPSTICK)

GAUGE GP-OIL LEVEL (DIPSTICK)

9Y-6105 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR

i00444562 SEBP2292

9Y6105 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme

For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-1380	[1]	GAUGE AS-OIL LEVEL (DIPSTICK)
2.	7E-4505	[1]	TUBE AS-VENT
3.	6I-1381	[1]	TUBE AS-OIL GAUGE
4.	8S-1326	[1]	CONNECTOR AS
	5P-4443	[1]	SLEEVE-AIR BRAKE
	5P-4448	[1]	NUT-AIR BRAKE
5.	6L-3616	[2]	CONNECTOR
6.	6V-1085	[1]	ELBOW-ADAPTER
7.	2M-9780	[1]	SEAL-O-RING
8.	2S-1865	[1]	BRACKET
9.	5P-0537	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
10.	0S-1594	[1]	BOLT (3/8-16X1-IN)
11.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
12.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	7B-7501	[1]	CLIP
14.	1D-4533	[1]	BOLT (1/4-20X2.25-IN)