AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-7580 TURBOCHARGER GP S/N 08Z75500-UP PART OF 7W-8581 TURBOCHARGER GP 330-A EXCAVATOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

EXCAVATOR 330-A EXCAVATOR 2ZM
 330, 330L Excavators 2ZM00001-UP (MACHINE) SEBP2292 330-A 2ZM   (1994)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
106-7407 TURBOCHARGER GP
TURBOCHARGER GP
111-8035 TURBOCHARGER GP
TURBOCHARGER GP
7C-7580 TURBOCHARGER GP
TURBOCHARGER GP
7W-8581 TURBOCHARGER GP
 

#SEBP22920130
 

7C-7580: TURBOCHARGER GP

7C-7580 TURBOCHARGER GP
S/N 08Z75500-UP
PART OF 7W-8581 TURBOCHARGER GP
i00157245 SEBP2292
7C7580 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7598 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7W-8842 [1] HOUSING-COMPRESSOR  
3. 7W-9447 [1] HOUSING  
4. 7W-7778 [1] CLAMP AS (COMPRESSOR)  
5. 5S-4517 [1] CLAMP AS (TURBINE)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22920131
 

7W-8581: TURBOCHARGER GP

7W-8581 TURBOCHARGER GP
S/N 08Z75500-UP
PART OF 9Y-4134 ENGINE AR
i00157287 SEBP2292
7W8581 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7580 CY [1] TURBOCHARGER GP  
2. 7L-3195 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
3. 1S-4295 [1] GASKET (TURBOCHARGER)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22920132
 

111-5162: CONTROL GP-FUEL RATIO

111-5162 CONTROL GP-FUEL RATIO
S/N 6NC1-UP; 08Z89730-99999
PART OF 128-8806 PUMP GP-GOV & FUEL INJ
i00123173 SEBP2292
1115162 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9315 [2] WASHER-SPRING  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3E-6760 [1] SEAL-O-RING  
6. 4P-7274 [1] COVER  
7. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
8. 4W-0924 [1] RETAINER  
9. 5P-8210 [1] SEAL-O-RING  
10. 7W-2826 [1] SPRING  
11. 4P-7275 [1] COVER  
12. 106-6493 [1] WASHER  
13. 6I-1564 [1] DIAPHRAGM  
14. 9N-1754 [1] SPRING  
15. 7W-2828 [1] SPRING  
16. 7W-2015 [1] EXTENSION-VALVE  
17. 7N-9035 [1] RETAINER  
18. 7N-9062 [1] HOUSING  
19. 8N-5763 [1] SEAL  
20. 8N-5764 [1] PISTON  
21. 8F-4610 [1] RING-RETAINING  
22. 2W-9316 [1] VALVE AS (FUEL CONTROL)  
23. 9Y-8088 [1] VALVE  
24. 8N-5765 [1] SPRING  
25. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

#SEBP22920133
 

4W-1339: CONTROL GP-FUEL RATIO

4W-1339 CONTROL GP-FUEL RATIO
S/N 08Z75500-UP
PART OF 9Y-4134 ENGINE AR
i00122117 SEBP2292
4W1339 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
2. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 7W-2830 CY [1] CONTROL GP-FUEL RATIO  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS (FUEL)(GOVERNOR HOUSING)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22920134
 

7W-2830: CONTROL GP-FUEL RATIO

7W-2830 CONTROL GP-FUEL RATIO
S/N 08Z75500-UP
PART OF 4W-1339 CONTROL GP-FUEL RATIO
i00122403 SEBP2292
7W2830 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
2. 2W-9315 [2] WASHER-SPRING  
3. 4W-0924 [1] RETAINER  
4. 5P-8210 [1] SEAL-O-RING  
5. 7W-2826 [1] SPRING  
6. 4P-7275 [1] COVER  
7. 106-6493 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
13. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
15. 4P-7274 [1] COVER  
16. 2W-9316 [1] VALVE AS (FUEL CONTROL)  
17. 7N-9036 [1] VALVE (FUEL CONTROL)  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7W-2015 [1] EXTENSION-VALVE  
21. 7W-2827 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 6I-1564 [1] DIAPHRAGM  
24. 3E-6760 [1] SEAL-O-RING  
25. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

#SEBP22920135
 

102-7987: CONTROL GP-GOVERNOR

102-7987 CONTROL GP-GOVERNOR
S/N 2ZM1-UP; 5YM1-UP
PART OF 113-8357, 113-8358 CHASSIS AR
i00466818 SEBP2292
1027987 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0070 [1] SPRING  
2. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
3. 5C-6266 [2] BOLT (5/8-11X1-IN)  
4. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
7. 8T-4224 [16] WASHER-HARD (8.8X16X2-MM THK)  
8. 6D-4246 [2] CLIP (LOOP)  
9. 8T-4189 M [11] BOLT (M8X1.25X20-MM)  
10. 106-0218 [1] BRACKET AS  
11. 102-7991 [1] LEVER AS  
12. 5C-7261 M [1] NUT (M8X1.25-THD)  
13. 9G-9154 [1] CLIP  
14. 106-0097 [1] MOTOR AS-GOVERNOR  
  7N-7779 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7Y-5560 [1] COVER  
  7Y-5561 [1] PACKING  
15. 7Y-5478 [1] COVER AS  
16. 8T-4133 M [1] NUT (M10X1.5-THD)  
17. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
18. 4I-5457 [1] BRACKET AS  
19. 106-0120 [1] BRACKET AS  
  M   METRIC PART
 

#SEBP22920136
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 6NC1-UP; 08Z75500-99999
PART OF 128-8806, 4P-9977 PUMP GP-GOV & FUEL INJ
i00122287 SEBP2292
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22920137
 

2W-1011: FILTER GP-FUEL

2W-1011 FILTER GP-FUEL
S/N 6NC1-UP; 08Z75500-UP
PART OF 118-9730, 9Y-4134 ENGINE AR
i00157121 SEBP2292
2W1011 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG (1/8-27 PTF)  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS (SECONDARY FUEL FILTER)  
6. 030-7947 [2] ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
10. 3J-1907 [2] SEAL-O-RING  
11. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP22920138
 

1W-6351: FILTER GP-PRIMARY FUEL

1W-6351 FILTER GP-PRIMARY FUEL
S/N 08Z75500-82179
PART OF 6I-1003 PUMP GP-FUEL PRM & PRIM FILTER
i00121988 SEBP2292
1W6351 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0803 [1] BASE-FILTER  
2. 7N-1628 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 8H-2778 [1] SEAL-RING  
5. 1L-3769 [1] RING-RETAINING  
6. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
7. 7H-9678 [1] RETAINER-ELEMENT  
8. 7S-9323 [1] SPRING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
11. 7E-5346 [1] VALVE AS (FUEL FILTER)  
12. 2H-3429 [1] RING-RETAINING  
 

#SEBP22920139
 

2W-2410: GOVERNOR GP

2W-2410 GOVERNOR GP
S/N 6NC1-UP; 08Z75500-99999
PART OF 128-8806, 4P-9977 PUMP GP-GOV & FUEL INJ
i00122036 SEBP2292
2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 330-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG  
2. 8N-3259 C [1] COVER-HIGH IDLE  
3. 7N-2594 C [2] SETSCREW-SLOTTED  
4. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
5. 3J-7354 C [1] SEAL-O-RING  
6. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
6A. 4N-5485 C [1] BODY-VALVE  
6B. 6H-9691 C [1] SEAL-O-RING  
6C. 4N-5484 C [1] VALVE-NEEDLE  
6D. 5F-9144 C [1] SEAL-O-RING  
8. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
9. 7N-8780 C [1] COVER AS-CONTROL  
9A. 138-9507 C [1] SEAL-LIP TYPE  
10. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
11. 150-3728 C [1] GASKET  
12. 3P-0009 C [1] INSULATOR  
13. 1P-2497 C [2] BOLT-HEAD (10-24X1-IN)  
14. 8N-3258 C [1] COVER-LOAD STOP  
15. 6D-3897 [1] BOLT (8-32X0.5-IN)  
16. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
17. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
18. 1W-4243 [1] SPRING-BUMPER  
19. 8N-2488 [1] BOLT-LOAD STOP  
20. 8N-3256 [1] COLLAR-LOAD STOP  
21. 8L-5832 [1] NUT-HEX (10-32-THD)  
22. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
23. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
24. 1N-3800 [1] SLEEVE-RACK CONTROL  
25. 6N-3504 [1] SEAT-GOVERNOR SPRING  
26. 2W-2216 [1] SPRING-LINK  
27. 2M-7819 [2] RING-RETAINING  
28. 1N-3802 [1] SEAT-SPRING  
29. 8N-2507 [1] PISTON AS-SERVO  
  7C-0791 [1] CYLINDER AS  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
29A. 8N-2505 [1] VALVE-GOVERNOR SERVO  
29B. 7W-0250 C [1] SLEEVE  
29C. 5P-9757 [1] SEAL-O-RING  
30. 8N-3168 C [1] LEVER-THROTTLE  
31. 2W-6102 C [1] LEVER-SPRING SEAT  
32. 2W-7400 C [1] SPRING  
33. 8N-3087 C [1] STOP-IDLE DETENT  
34. 4N-2953 [1] RING-LOCK  
35. 7E-4892 [2] RACE-THRUST BEARING  
36. 7M-7219 [1] BEARING-THRUST  
37. 4W-6868 [1] RISER-GOVERNOR  
38. 2N-0828 [2] WASHER  
39. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (7.78MM OD X 12.7MM LONG)  
  4F-6024 [2] PIN (6.193MM OD X 8.0MM LONG)  
40. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  7N-7268 [1] SEAT-SPRING  
41. 4N-6408 [1] PISTON AS  
41A. 4N-6404 [1] RING-RETAINING  
41B. 4N-6406 [1] RING-SPACER  
41C. 4N-6407 [1] SPOOL-DASHPOT  
42. 7N-8785 C [1] SHAFT-PIVOT  
43. 150-3730 C [1] GASKET  
44. 7N-7270 C [2] SLEEVE-SPRING  
45. 7N-8821 C [3] RING-RETAINING  
46. 3K-5733 C [1] SPRING  
47. 8N-2501 C [1] HOUSING AS-GOVERNOR  
  8N-3945 [1] BUSHING-TERMINAL  
  7E-5346 [1] VALVE AS (FUEL CHECK)  
47A. 8N-2499 C [1] SPRING-GUIDE  
47B. 3D-8317 C [1] RING-RETAINING  
47C. 4N-0260 C [1] SEAL-LIP TYPE  
47D. 2F-2290 C [1] PLUG-CORE  
52. 2W-9305 C [2] PLATE-THROTTLE  
53. 4N-0432 C [1] BALL BEARING  
55. 7N-2171 C [4] RING-RETAINING  
56. 7N-2172 C [2] PIN  
57. 6I-2003 C [1] GASKET  
58. 7N-8775 C [1] NUT-HIGH IDLE  
59. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
60. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
61. 6I-2004 C [1] GASKET  
62. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Disassembly and Assembly
Turbocharger - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22

Caterpillar Parts SIS Catalog 330-A :

TURBOCHARGER GP
111-8035 TURBOCHARGER GP
TURBOCHARGER GP
106-7407 TURBOCHARGER GP
MUFFLER GP
7Y-0864 MUFFLER GP
MUFFLER GP
118-6037 MUFFLER GP
MOUNTING GP-AIR CLEANER
7Y-0868 MOUNTING GP-AIR CLEANER
MANIFOLD GP-EXHAUST
9L-5805 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
116-7564 MANIFOLD GP-EXHAUST
LINES GP-MUFFLER DRAIN
7Y-0870 LINES GP-MUFFLER DRAIN
TURBOCHARGER GP
7W-8581 TURBOCHARGER GP
CONTROL GP-FUEL RATIO
111-5162 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4W-1339 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
7W-2830 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
102-7987 CONTROL GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
2W-1011 FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
1W-6351 FILTER GP-PRIMARY FUEL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.