AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-3227 FASTENER GP-FUEL LINES S/N 8NM1-4256 FOR USE WITH @@@@@117-5136@@@@@, @@@@@120-3865@@@@@, @@@@@117-5129@@@@@ AN ATTACHMENT 3126


FUEL SYSTEM
LINES GP-FUEL
FILTER GP-FUEL
ELECTRICAL AND STARTING SYSTEM
SENDER GP
FUEL SYSTEM
GOVERNOR GP

MARINE ENGINE 3126 MARINE ENGINE 8NM
 3126 Marine Engine 8NM00001-UP SEBP2297 3126 8NM   (1994)

FUEL SYSTEM

LINES GP-FUEL
COOLER GP-FUEL
119-2169 COOLER GP-FUEL
FASTENER GP-FUEL LINES
129-0914 FASTENER GP-FUEL LINES
FASTENER GP-FUEL LINES
129-3227 FASTENER GP-FUEL LINES
FILTER & LINES GP-PRIMARY FUEL
120-3865 FILTER & LINES GP-PRIMARY FUEL
FITTING GP-FUEL PRESS SENDER
117-4731 FITTING GP-FUEL PRESS SENDER
FITTING GP-FUEL PRESS SENDER
121-2119 FITTING GP-FUEL PRESS SENDER
 

#SEBP22970200
 

129-3227: FASTENER GP-FUEL LINES

129-3227 FASTENER GP-FUEL LINES
S/N 8NM1-4256
FOR USE WITH @@@@@117-5136@@@@@, @@@@@120-3865@@@@@, @@@@@117-5129@@@@@
AN ATTACHMENT
i00494743 SEBP2297
1293227 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9297 [1] CLIP (LOOP)  
2. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 5C-7261 M [1] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP22970201
 

120-3865: FILTER & LINES GP-PRIMARY FUEL

120-3865 FILTER & LINES GP-PRIMARY FUEL
FOR USE WITH @@@@@121-6839@@@@@, @@@@@121-6840@@@@@, @@@@@121-6841@@@@@, RH SERVICED ENGINES., OR, WHEN USING
AN ATTACHMENT
i00472189 SEBP2297
1203865 FILTER & LINES GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8490 M [1] BOLT (M6X1X25-MM)  
2. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
3. 5M-5687 [2] CLIP  
4. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
5. 5P-7970 M [2] NUT (M8X1.25-THD)  
6. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
7. 120-0201 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
8. 6V-8397 [7] SEAL-O-RING  
9. 104-3987 [2] CLIP  
10. 149-8055 [1] TUBE AS  
11. 119-9293 [1] TUBE AS  
12. 7E-3735 [1] GASKET  
13. 112-5474 [1] STRAP AS  
  8T-3612 M NUT-WELD (M8X1.25-THD)  
14. 7E-5986 [1] BRACKET AS  
15. 3J-1907 [5] SEAL-O-RING  
16. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
17. 148-8378 [1] ELBOW AS (90 DEGREES)  
  6V-8724 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING (12.83-MM O.D.)  
  3J-1907 [1] SEAL-O-RING (11.89-MM I.D.)  
18. 6V-9850 [1] ELBOW  
19. 3E-7410 [1] TEE  
20. 119-5730 [1] TUBE AS  
21. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
22. 6V-9836 [1] TEE-SWIVEL  
23. 8T-2335 [1] ELBOW  
24. 6V-8636 [2] CONNECTOR  
25. 110-4394 Y [1] PUMP GP-FUEL PRIMING  
26. 3N-3252 [1] SPRING  
27. 8T-0151 [1] ADAPTER  
28. 5F-7054 [1] SEAL-O-RING  
29. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
30. 200-4504 [1] TUBE AS  
31. 7E-5189 [1] VALVE AS (FUEL)  
32. 5P-7813 [1] SEAL-O-RING  
33. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
34. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
35. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970202
 

117-5135: FILTER GP-FUEL

117-5135 FILTER GP-FUEL
S/N 8NM1-4256
CANNOT BE USED WITH FUEL SEPARATOR GP
AN ATTACHMENT
i00473208 SEBP2297
1175135 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
2. 6I-4802 [1] BASE AS  
  6I-4801 [1] INSERT-FILTER  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 6I-4783 [1] FILTER-FUEL  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
  M   METRIC PART
 

#SEBP22970203
 

117-4731: FITTING GP-FUEL PRESS SENDER

117-4731 FITTING GP-FUEL PRESS SENDER
S/N 8NM1-4256
FOR USE WITH @@@@@117-4732@@@@@
AN ATTACHMENT
i00472240 SEBP2297
1174731 FITTING GP-FUEL PRESS SENDER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-2888 [1] CONNECTOR  
2. 3J-1907 [1] SEAL-O-RING  
3. 3B-6552 [1] ELBOW-PIPE  
 

#SEBP22970204
 

121-2119: FITTING GP-FUEL PRESS SENDER

121-2119 FITTING GP-FUEL PRESS SENDER
S/N 8NM1-4256
FOR USE WITH @@@@@117-4730@@@@@, @@@@@117-4732@@@@@, @@@@@117-4733@@@@@, @@@@@117-4734@@@@@, @@@@@117-5136@@@@@, @@@@@120-3865@@@@@, OR, OR, RH MOUNTED FUEL FILTER
AN ATTACHMENT
i00480504 SEBP2297
1212119 FITTING GP-FUEL PRESS SENDER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4487 [1] ADAPTER  
2. 1J-9671 [1] SEAL-O-RING  
 

#SEBP22970205
 

109-4588: GOVERNOR GP-UNIT INJECTOR

109-4588 GOVERNOR GP-UNIT INJECTOR
S/N 8NM1-272
PART OF 113-6174 GOVERNOR GP-UNIT INJECTOR
i00490763 SEBP2297
1094588 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9443 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 126-6230 [1] SPRING GP-GOVERNOR  
4. 9Y-5805 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
6. 9Y-4808 [1] SPRING-DASHPOT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970206
 

109-4588: GOVERNOR GP-UNIT INJECTOR

109-4588 GOVERNOR GP-UNIT INJECTOR
PART OF 113-6174 GOVERNOR GP-UNIT INJECTOR
Type 1
i00490759 SEBP2297
1094588 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4209 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 113-5917 [1] SPRING GP  
4. 9Y-5805 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
6. 9Y-4808 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970207
 

109-4588: GOVERNOR GP-UNIT INJECTOR

109-4588 GOVERNOR GP-UNIT INJECTOR
PART OF 113-6174 GOVERNOR GP-UNIT INJECTOR
Type 2
i00490762 SEBP2297
1094588 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4209 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 126-6230 C [1] SPRING GP-GOVERNOR  
4. 9Y-5805 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
6. 9Y-4808 [1] SPRING-DASHPOT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970208
 

110-4209: GOVERNOR GP-UNIT INJECTOR

110-4209 GOVERNOR GP-UNIT INJECTOR
PART OF 109-4588 GOVERNOR GP-UNIT INJECTOR
i00470545 SEBP2297
1104209 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7039 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. 8C-5899 [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 107-7498 [1] BLOCK AS-BEARING  
27. 7E-3217 [1] LEVER AS  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5744 [1] LEVER AS-LIMIT  
34. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 100-6422 [1] HOUSING AS-REAR  
41. 7W-6104 [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 9T-0823 [2] WASHER (3.3X7.4X1-MM THK)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
83. 5M-2057 [1] SEAL-O-RING  
84. 4P-3537 [1] RING-TOLERANCE  
85. 4P-3539 [1] LEVER-THROTTLE  
86. 7E-7257 [1] INSERT  
87. 6H-9691 [1] SEAL-O-RING  
88. 7E-7952 [1] SPRING-FLAT  
89. 8C-6365 M [1] BOLT-SOCKET HEAD (M3X0.5X6-MM)  
90. 6V-8189 [1] NUT (5/16-18-THD)  
91. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970209
 

113-6174: GOVERNOR GP-UNIT INJECTOR

113-6174 GOVERNOR GP-UNIT INJECTOR
S/N 8NM1-4257
i00477586 SEBP2297
1136174 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
2. 109-4588 Y [1] GOVERNOR GP-UNIT INJECTOR  
3. 119-1705 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Service Letter-NACD
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Australia
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Service Letter-CFEL
Service Letter-CSARL
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Americas
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-Brazil
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Service Letter-Truck/Ag/Marine
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Technical Information Bulletin
Unit Injector Hold Down Bolts
Unit Injector Hold Down Bolts
Specifications
Fuel Filter Lines
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Service Letter-China
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Remove Certain 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On 3100 Engines From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08

Caterpillar Parts SIS Catalog 3126 :

FASTENER GP-FUEL LINES
129-0914 FASTENER GP-FUEL LINES
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL FILTER
121-6840 FASTENER GP-FUEL FILTER
FASTENER GP-FUEL FILTER
121-6839 FASTENER GP-FUEL FILTER
FASTENER GP-FUEL FILTER
117-6831 FASTENER GP-FUEL FILTER
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
COOLER GP-FUEL
119-2169 COOLER GP-FUEL
CONTROL GP-GOVERNOR
7E-5353 CONTROL GP-GOVERNOR
FILTER & LINES GP-PRIMARY FUEL
120-3865 FILTER & LINES GP-PRIMARY FUEL
FILTER GP-FUEL
117-5135 FILTER GP-FUEL
FITTING GP-FUEL PRESS SENDER
117-4731 FITTING GP-FUEL PRESS SENDER
FITTING GP-FUEL PRESS SENDER
121-2119 FITTING GP-FUEL PRESS SENDER
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
110-4209 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
 
Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
- bucket
FABICK CAT
Caterpillar 3126B, Construction
On Request 
Caterpillar 3126B, Construction
- Industrial engines
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
CATERPILLAR 3126 1995
 
CATERPILLAR 3126 1995
- MARINE - PROPULSION
BARLOWORLD STET
1999 CAT 3126
USD $14,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
1999 CAT 3126
USD $11,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.