AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

115-9443 GOVERNOR GP-UNIT INJECTOR S/N 8NM1-272; 8NM1610-UP PART OF 109-4588, 135-7298 GOVERNOR GP-UNIT INJECTOR 3126


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION
LINES GP-FUEL
FILTER GP-FUEL

MARINE ENGINE 3126 MARINE ENGINE 8NM
 3126 Marine Engine 8NM00001-UP SEBP2297 3126 8NM   (1994)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
110-4209 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
113-6174 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-9443 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
135-7298 GOVERNOR GP-UNIT INJECTOR
136-0590 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
119-1705 LINES GP-GOVERNOR OIL
 

#SEBP22970210
 

115-9443: GOVERNOR GP-UNIT INJECTOR

115-9443 GOVERNOR GP-UNIT INJECTOR
S/N 8NM1-272; 8NM1610-UP
PART OF 109-4588, 135-7298 GOVERNOR GP-UNIT INJECTOR
i00474597 SEBP2297
1159443 GOVERNOR GP-UNIT INJECTOR Parts scheme 1159443 GOVERNOR GP-UNIT INJECTOR Parts scheme 1159443 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-6031 [1] HOUSING AS-REAR  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
4. 7E-3216 [1] BLOCK AS-BEARING  
5. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
6. 7C-8854 [1] PIN-CLEVIS  
7. 8T-1460 [1] RING-RETAINING  
8. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
9. 7C-5541 [2] PLATE  
10. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
11. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
12. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 123-6433 [1] ARBOR AS-TORQUE CAM  
15. 108-1612 [1] CLEVIS  
16. 4W-6630 [1] LEVER  
17. 4P-4000 [1] SPRING-LEVER  
18. 128-4794 [1] PLUG  
19. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
20. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
21. 8T-7060 [1] RING-RETAINING  
22. 125-8158 [1] SLEEVE-RACK CONTROL  
23. 5C-2874 M [2] NUT (M5X0.8-THD)  
24. 115-2553 [1] VALVE-GOVERNOR SERVO  
25. 4P-5744 [1] LEVER AS-LIMIT  
26. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
27. 5P-9757 [1] SEAL-O-RING  
28. 6D-9953 [1] PIN-SPRING  
29. 108-1613 [1] PISTON-SERVO  
30. 8C-3312 [1] RING-RETAINING  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 7W-8993 [2] WEIGHT  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7W-5591 [1] SEAT-GOVERNOR SPRING  
39. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
46. 4P-8948 [1] SEAT AS-SPRING  
47. 7W-1440 B [8] SHIM (0.12-MM THK)  
48. 7C-2743 [2] RACE  
49. 7W-5561 [1] BEARING-THRUST  
50. 115-1192 [1] SEAL-GOVERNOR HOUSING  
51. 8C-5061 [1] RING-RETAINING  
52. 7C-5150 [1] PIN  
53. 7C-5480 [1] SPRING-TORSION  
54. 7C-8640 [1] SPRING-CAM  
55. 7W-5594 [1] SHAFT AS-PIVOT  
  8C-5899 [1] PIN-SPRING  
56. 2S-4078 [1] SEAL-O-RING  
57. 7E-3217 [1] LEVER AS  
58. 3P-3547 [1] RING-RETAINING  
59. 114-1803 [1] LEVER AS  
60. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
61. 7N-2171 [1] RING-RETAINING  
62. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
63. 4P-3539 [1] LEVER-THROTTLE  
64. 4P-3537 [1] RING-TOLERANCE  
65. 4W-6010 [1] CLAMP  
66. 6V-5683 M [1] BOLT (M6X1X16-MM)  
67. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
68. 5C-8312 M [1] NUT (M4X0.7-THD)  
69. 5M-2057 [1] SEAL-O-RING  
70. 9Y-1837 [1] SPRING  
71. 8C-6365 M [1] BOLT-SOCKET HEAD (M3X0.5X6-MM)  
72. 9T-0823 [2] WASHER (3.3X7.4X1-MM THK)  
73. 7E-7257 [1] INSERT  
74. 6H-9691 [1] SEAL-O-RING  
75. 6V-8189 [1] NUT (5/16-18-THD)  
76. 7E-7952 [1] SPRING-FLAT  
77. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
78. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970211
 

135-7298: GOVERNOR GP-UNIT INJECTOR

135-7298 GOVERNOR GP-UNIT INJECTOR
S/N 8NM1610-UP
PART OF 136-0590 GOVERNOR GP-UNIT INJECTOR
i00499280 SEBP2297
1357298 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9443 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1441 [1] CAM-TORQUE  
3. 126-6230 [1] SPRING GP-GOVERNOR  
4. 9Y-5805 [1] PLUG-ORIFICE  
5. 4P-5745 [1] CONTROL AS-FUEL RATIO  
  6I-1564 [1] DIAPHRAGM  
  7C-5599 [1] WASHER  
  7W-1691 [1] WASHER (19.15X35X3-MM THK)  
  8T-5447 [1] RING-RETAINING  
6. 9Y-4808 [1] SPRING-DASHPOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970212
 

136-0590: GOVERNOR GP-UNIT INJECTOR

136-0590 GOVERNOR GP-UNIT INJECTOR
S/N 8NM1610-4223
i00500250 SEBP2297
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  135-7298 Y [1] GOVERNOR GP-UNIT INJECTOR  
  119-1705 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970213
 

162-0218: INJECTOR GP-FUEL

162-0218 INJECTOR GP-FUEL
S/N 8NM4257-UP
PART OF 185-2303 PUMP GP-FUEL INJECTION
i01252778 SEBP2297
1620218 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8718 [1] SEAL-O-RING  
 

#SEBP22970214
 

6I-2498: LINES GP-FLEXIBLE FUEL

6I-2498 LINES GP-FLEXIBLE FUEL
S/N 8NM1-4256
FOR USE WITH PIPE THREADS CONNECTOR
AN ATTACHMENT
i00394447 SEBP2297
6I2498 LINES GP-FLEXIBLE FUEL Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8636 [2] CONNECTOR  
2. 3J-1907 [2] SEAL-O-RING  
3. 6V-8397 [6] SEAL-O-RING  
4. 6V-9850 [2] ELBOW  
5. 8C-6869 [2] CONNECTOR  
6. 8W-2522 I [2] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP22970215
 

117-5136: LINES GP-FUEL FILTER

117-5136 LINES GP-FUEL FILTER
S/N 8NM1-4256
FOR USE WITH @@@@@121-6839@@@@@, @@@@@121-6840@@@@@, @@@@@121-6841@@@@@, RH MOUNTED FUEL PRIMING PUMP, OR, WHEN USING
AN ATTACHMENT
i00473218 SEBP2297
1175136 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8490 M [1] BOLT (M6X1X25-MM)  
2. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
3. 5M-5687 [2] CLIP  
4. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
5. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
6. 5P-7970 M [2] NUT (M8X1.25-THD)(M8X1.25 THD)  
7. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
8. 120-0201 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
9. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
10. 104-3987 [2] CLIP  
11. 149-8055 [1] TUBE AS  
12. 119-9293 [1] TUBE AS  
13. 7E-3735 [1] GASKET  
14. 3E-7410 [1] TEE  
15. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
16. 112-5474 [1] STRAP AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
17. 7E-5986 [1] BRACKET AS  
18. 3J-1907 [5] SEAL-O-RING  
19. 6V-8397 [6] SEAL-O-RING  
20. 6V-8636 [2] CONNECTOR (9.27MM ID)  
21. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
22. 6V-9850 [1] ELBOW (11/16-16THD)  
23. 6V-9836 [1] TEE-SWIVEL  
24. 8T-2335 [1] ELBOW  
25. 119-5730 [1] TUBE AS  
26. 3N-3252 [1] SPRING  
27. 5F-7054 [1] SEAL-O-RING (.406IN OD)  
28. 5P-7813 [1] SEAL-O-RING (18.6MM ID)  
29. 7E-5189 [1] VALVE AS (FUEL)(FILTER)  
30. 200-4504 [1] TUBE AS  
31. 8T-0151 [1] ADAPTER  
32. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
33. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
34. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970216
 

119-2259: LINES GP-FUEL FILTER

119-2259 LINES GP-FUEL FILTER
PRIMING PUMP, LEFT HAND
AN ATTACHMENT
i00519193 SEBP2297
1192259 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
  6V-6317 M [2] BOLT (M10X1.5X20-MM)  
2. 8T-0788 [1] ELBOW  
3. 6V-8397 [8] SEAL-O-RING  
4. 119-2257 [1] TUBE AS  
5. 6V-8636 [2] CONNECTOR  
6. 3J-1907 [7] SEAL-O-RING  
7. 119-4312 I [1] HOSE AS  
8. 5F-7054 [1] SEAL-O-RING  
9. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
10. 7E-5190 [1] TUBE AS  
11. 7E-5189 [1] VALVE AS (FUEL)(REGULATOR)  
12. 5P-7813 [1] SEAL-O-RING  
13. 3N-3252 [1] SPRING  
14. 8T-0151 [1] ADAPTER  
15. 7X-2459 [1] ADAPTER-TEE  
16. 6V-9836 [1] TEE-SWIVEL  
17. 3E-7410 [1] TEE  
18. 6V-8724 [1] ELBOW  
19. 7W-0183 [1] TUBE AS  
20. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  9S-1350 [1] CLIP  
21. 110-4394 Y [1] PUMP GP-FUEL PRIMING  
22. 6I-2422 [1] VALVE AS  
  2W-3294 [1] PLUNGER AS-VALVE  
  2W-7400 [1] SPRING  
  3K-0360 [1] SEAL-O-RING  
  6I-2424 [1] PLUG  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970217
 

119-2259: LINES GP-FUEL FILTER

119-2259 LINES GP-FUEL FILTER
S/N 8NM1-4256
PRIMING PUMP, LEFT HAND
AN ATTACHMENT
i00554584 SEBP2297
1192259 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8397 [8] SEAL-O-RING  
4. 119-2257 [1] TUBE AS  
5. 6V-8636 [2] CONNECTOR  
6. 3J-1907 [7] SEAL-O-RING  
7. 119-4312 I [1] HOSE AS  
8. 5F-7054 [1] SEAL-O-RING  
9. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
10. 200-4504 [1] TUBE AS  
11. 7E-5189 [1] VALVE AS (FUEL)(REGULATOR)  
12. 5P-7813 [1] SEAL-O-RING  
13. 3N-3252 [1] SPRING  
14. 8T-0151 [1] ADAPTER  
15. 8T-0788 [1] ELBOW  
17. 3E-7410 [1] TEE  
18. 6V-8724 [1] ELBOW  
19. 7W-0183 [1] TUBE AS  
20. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
22. 9S-1350 [1] CLIP  
23. 7X-2459 [1] ADAPTER-TEE  
24. 141-8288 YC [1] VALVE GP-FUEL RELIEF  
25. 110-4394 Y [1] PUMP GP-FUEL PRIMING  
26. 6V-9836 [1] TEE-SWIVEL  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP22970218
 

119-2260: LINES GP-FUEL FILTER

119-2260 LINES GP-FUEL FILTER
LEFT HAND
AN ATTACHMENT
i00519197 SEBP2297
1192260 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8397 [7] SEAL-O-RING  
4. 119-2258 [1] TUBE AS  
5. 3J-1907 [8] SEAL-O-RING  
6. 119-4312 I [1] HOSE AS  
7. 5F-7054 [1] SEAL-O-RING  
8. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
9. 7E-5190 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)(REGULATOR)  
11. 5P-7813 [1] SEAL-O-RING  
12. 3N-3252 [1] SPRING  
13. 8T-0151 [1] ADAPTER  
14. 6V-8636 [2] CONNECTOR  
15. 6V-8774 [1] TEE  
16. 3E-7410 [1] TEE  
17. 6V-8724 [1] ELBOW  
18. 7W-0183 [1] TUBE AS  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
21. 9S-1350 [1] CLIP  
22. 7X-2459 [1] ADAPTER-TEE  
23. 6I-2422 [1] VALVE AS  
  2W-3294 [1] PLUNGER AS-VALVE  
  2W-7400 [1] SPRING  
  3K-0360 [1] SEAL-O-RING  
  [1] HOUSING-VALVE  
  6I-2424 [1] PLUG  
24. 8T-0788 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP22970219
 

119-2260: LINES GP-FUEL FILTER

119-2260 LINES GP-FUEL FILTER
S/N 8NM1-4256
LEFT HAND
AN ATTACHMENT
i00540980 SEBP2297
1192260 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3126 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
3. 6V-8397 [6] SEAL-O-RING  
4. 119-2258 [1] TUBE AS  
5. 3J-1907 [7] SEAL-O-RING  
6. 119-4312 I [1] HOSE AS  
7. 5F-7054 [1] SEAL-O-RING  
8. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
9. 200-4504 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)(REGULATOR)  
11. 5P-7813 [1] SEAL-O-RING  
12. 3N-3252 [1] SPRING  
13. 8T-0151 [1] ADAPTER  
14. 6V-8774 [1] TEE  
16. 3E-7410 [1] TEE  
17. 148-8378 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING (12.83MM OD)  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING (11.89MM ID)  
18. 7W-0183 [1] TUBE AS  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
21. 9S-1350 [1] CLIP  
22. 7X-2459 [1] ADAPTER-TEE  
23. 141-8288 YC [1] VALVE GP-FUEL RELIEF  
24. 8T-0788 [1] ELBOW  
25. 6V-8636 [2] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/22
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/22
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/22
Low Idle Adjustment, Additional "Buffer" Spring Adjustment Screw Used On Marine Governors{1264}
1997/04/01
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116 and 3126 Engines
Governor - Remove
3114, 3116 and 3126 Engines

Caterpillar Parts SIS Catalog 3126 :

GOVERNOR GP-UNIT INJECTOR
113-6174 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
110-4209 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
109-4588 GOVERNOR GP-UNIT INJECTOR
FITTING GP-FUEL PRESS SENDER
121-2119 FITTING GP-FUEL PRESS SENDER
FITTING GP-FUEL PRESS SENDER
117-4731 FITTING GP-FUEL PRESS SENDER
FILTER GP-FUEL
117-5135 FILTER GP-FUEL
GOVERNOR GP-UNIT INJECTOR
135-7298 GOVERNOR GP-UNIT INJECTOR
136-0590 GOVERNOR GP-UNIT INJECTOR
INJECTOR GP-FUEL
162-0218 INJECTOR GP-FUEL
LINES GP-FLEXIBLE FUEL
6I-2498 LINES GP-FLEXIBLE FUEL
LINES GP-FUEL FILTER
117-5136 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
119-2259 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
119-2259 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
119-2260 LINES GP-FUEL FILTER

Truck sale:

Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
 
Caterpillar B312-60DC, schaufel, Bau-Und Bergbauausrüstung
- bucket
FABICK CAT
Caterpillar 3126B, Construction
On Request 
Caterpillar 3126B, Construction
- Industrial engines
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
CATERPILLAR 3126 1995
 
CATERPILLAR 3126 1995
- MARINE - PROPULSION
BARLOWORLD STET
1999 CAT 3126
USD $14,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
1999 CAT 3126
USD $11,000 
1999 CAT 3126

Milton CAT Power Systems
Milford, Massachusetts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.