UNDERCARRIAGE
LINK GP-TRACKLUBRICATION GP-PIVOT SHAFT
BOGIE GP
FRAME AND BODY
FRAME GPUNDERCARRIAGE
IDLER GPROLLER GP
UNDERCARRIAGE
LINK GP-TRACK
#SEBP23030350
6Y-8193: LINK AS-TRACK
6Y-8193 LINK AS-TRACK
S/N 7TL1-556
SEALED & LUBRICATED - ARCTIC
PART OF 6Y-8194 TRACK GP
AN ATTACHMENT
S/N 7TL1-556
SEALED & LUBRICATED - ARCTIC
PART OF 6Y-8194 TRACK GP
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-0470 | [86] | RING-RETAINING | |
| 2. | 7T-2279 | [1] | LINK-TRACK MASTER (BUSHING END, RH) | |
| 3. | 6Y-2144 | [43] | PIN-TRACK | |
| 4. | 7T-2275 | [42] | LINK-TRACK (RH) | |
| 5. | 9U-8536 | [86] | SEAL AS | |
| 6. | 7G-4332 | [43] | STOPPER | |
| 7. | 6Y-0473 | [43] | PLUG-CLEAR | |
| 8. | 9W-2755 | [86] | RING-THRUST | |
| 9. | 7T-2277 | [1] | LINK-TRACK MASTER (PIN END, RH) | |
| 10. | 7T-2280 | [1] | LINK-TRACK MASTER (BUSHING END, LH) | |
| 11. | 6Y-2142 | [43] | BUSHING-TRACK | |
| 12. | 7T-2278 | [1] | LINK-TRACK MASTER (PIN END, LH) | |
| 13. | 7T-2276 | [42] | LINK-TRACK (LH) |
#SEBP23030351
8E-7962: LINK AS-TRACK
8E-7962 LINK AS-TRACK
S/N 7TL1-556
SEALED & LUBRICATED-POSITIVE PIN RETENTION
PART OF 183-2120, 203-2199, 7T-2289, 7T-2295, 7T-3935 TRACK GP
AN ATTACHMENT
S/N 7TL1-556
SEALED & LUBRICATED-POSITIVE PIN RETENTION
PART OF 183-2120, 203-2199, 7T-2289, 7T-2295, 7T-3935 TRACK GP
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-0473 | [43] | PLUG-CLEAR | |
| 7G-4332 | [43] | STOPPER | ||
| 2. | 6Y-0470 | [86] | RING-RETAINING | |
| 3. | 6Y-2142 | [43] | BUSHING-TRACK | |
| 4. | 6Y-2144 | [43] | PIN-TRACK | |
| 5. | 7T-2275 | [42] | LINK-TRACK (RH) | |
| 6. | 7T-2276 | [42] | LINK-TRACK (LH) | |
| 7. | 7T-2277 | [1] | LINK-TRACK MASTER (PIN END, RH) | |
| 8. | 7T-2278 | [1] | LINK-TRACK MASTER (PIN END, LH) | |
| 9. | 7T-2279 | [1] | LINK-TRACK MASTER (BUSHING END, RH) | |
| 10. | 7T-2280 | [1] | LINK-TRACK MASTER (BUSHING END, LH) | |
| 11. | 9U-8536 | [86] | SEAL AS | |
| 12. | 9W-2755 | [86] | RING-THRUST |
#SEBP23030352
9W-6259: LUBRICATION GP-PIVOT SHAFT
9W-6259 LUBRICATION GP-PIVOT SHAFT
S/N 7TL1-556
PART OF 8E-5438 CHASSIS AR
S/N 7TL1-556
PART OF 8E-5438 CHASSIS AR
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 2. | 153-6237 | [1] | ELBOW AS | |
| 6V-9004 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 4. | 6V-1889 | [2] | CLIP (LOOP) | |
| 5. | 9W-6261 I | [1] | HOSE AS | |
| 6. | 9W-6403 | [1] | PLATE | |
| 7. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 9W-8277 | [1] | CAP AS-OIL FILLER | |
| 9. | 9U-9409 | [1] | TANK (PIVOT SHAFT OIL) | |
| 10. | 5S-7379 | [9] | BOLT (3/8-16X0.875-IN) | |
| 11. | 9W-6402 | [1] | PLATE | |
| 12. | 9W-6260 | [2] | SPACER | |
| 13. | 148-8359 | [1] | ELBOW AS | |
| 6V-9877 | [1] | ELBOW | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 14. | 9W-6262 | [1] | PLATE AS | |
| 9W-3335 | [1] | PLATE | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 15. | 9W-6263 | [1] | PLATE AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 1F-0748 | [1] | NUT-WELD (1/2-13-THD) | ||
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 16. | 9W-1694 | [4] | PAD | |
| 17. | 8T-1786 | [1] | FITTING-90 DEGREE | |
| 18. | 4M-5317 | [1] | BUSHING-REDUCER | |
| 19. | 7K-1181 | [1] | STRAP-CABLE | |
| 20. | 144-0195 E | HOSE (120-CM) | ||
| 21. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP23030353
311-1298: PIN AS-CARTRIDGE
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP23030354
135-6140: REINFORCEMENT GP-ROLLER FRAME
135-6140 REINFORCEMENT GP-ROLLER FRAME
S/N 7TL1-556
INCLUDES PARTS TO REINFORCE BOTH RH AND LH REAR TRACK ROLLER FRAMES FOR ONE MACHINE
Type 1
FIELD INSTALLATION
S/N 7TL1-556
INCLUDES PARTS TO REINFORCE BOTH RH AND LH REAR TRACK ROLLER FRAMES FOR ONE MACHINE
Type 1
FIELD INSTALLATION
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP23030355
135-6140: REINFORCEMENT GP-ROLLER FRAME
135-6140 REINFORCEMENT GP-ROLLER FRAME
S/N 7TL1-556
INCLUDES PARTS TO REINFORCE BOTH RH AND LH REAR TRACK ROLLER FRAMES FOR ONE MACHINE
Type 2
FIELD INSTALLATION
S/N 7TL1-556
INCLUDES PARTS TO REINFORCE BOTH RH AND LH REAR TRACK ROLLER FRAMES FOR ONE MACHINE
Type 2
FIELD INSTALLATION
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP23030356
125-2140: ROLLER & IDLER AR
125-2140 ROLLER & IDLER AR -COLD WEATHER
S/N 7TL1-556
SYMMETRICAL DUO-CONE, NITRILE RUBBER TORICS, SYNTHETIC OIL
PART OF 122-9414 COLD WEATHER AR
AN ATTACHMENT
S/N 7TL1-556
SYMMETRICAL DUO-CONE, NITRILE RUBBER TORICS, SYNTHETIC OIL
PART OF 122-9414 COLD WEATHER AR
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP23030357
139-7704: ROLLER AR-TRACK CARRIER
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-8099 | [1] | FRAME AS (RH) | |
| 155-8100 | [1] | FRAME AS (LH) | ||
| (EACH FRAME AS INCLUDES) | ||||
| 6T-3793 | [2] | SUPPORT (SLEEVE)(OUTER) | ||
| 9P-5708 | [2] | SUPPORT (SLEEVE)(INNER) | ||
| 1A. | 7T-3877 | [1] | HOOK | |
| 2. | 8T-5361 | [16] | WASHER-HARD (28X49X5-MM THK) | |
| 3. | 1Q-3691 | [2] | PLATE AS (RH INNER/LH OUTER) | |
| 4. | 1Q-3690 | [2] | PLATE AS (RH OUTER/LH INNER) | |
| 5. | 7X-0406 | [16] | BOLT (1-8X3-IN) | |
| 6. | 8C-6913 | [8] | WASHER-HARD (24X41.5X4-MM THK) | |
| 7. | 104-3495 Y | [2] | ROLLER GP-TRACK-SINGLE FLANGE | |
| 8. | 6T-4504 | [4] | CAP AS-TRACK ROLLER | |
| (EACH MAY INCLUDE) | ||||
| 1T-0068 | [1] | PIN-SPRING | ||
| 9. | 6T-4376 | [4] | CAP | |
| 10. | 7X-0393 | [8] | BOLT (7/8-9X6.5-IN) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23030358
139-7704: ROLLER AR-TRACK CARRIER
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-3690 | [2] | PLATE AS (RH OUTER/LH INNER) | |
| 2. | 1Q-3691 | [2] | PLATE AS (RH INNER/LH OUTER) | |
| 3. | 6T-4376 | [4] | CAP | |
| 4. | 6T-4504 | [4] | CAP AS-TRACK ROLLER | |
| (EACH INCLUDES) | ||||
| 1T-0068 | [1] | PIN-SPRING | ||
| 5. | 8C-6913 | [8] | WASHER-HARD (24X41.5X4-MM THK) | |
| 6. | 8T-5361 | [16] | WASHER-HARD (28X49X5-MM THK) | |
| 7. | 196-9955 CY | [2] | ROLLER GP-TRACK-SINGLE FLANGE | |
| 8. | 7X-0393 | [8] | BOLT (7/8-9X6.5-IN) | |
| 9. | 7X-0406 | [16] | BOLT (1-8X3-IN) | |
| 10. | 155-8099 | [1] | FRAME AS (RH) | |
| 11. | 155-8100 | [1] | FRAME AS (LH) | |
| (EACH FRAME AS INCLUDES) | ||||
| 6T-3793 | [2] | SUPPORT (SLEEVE)(OUTER) | ||
| 9P-5708 | [2] | SUPPORT (SLEEVE)(INNER) | ||
| 12. | 7T-3877 | [1] | HOOK | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23030359
1Z-0884: ROLLER AR-TRACK CARRIER
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-3692 | [1] | FRAME AS (RH) | |
| 2. | 1Q-3693 | [1] | FRAME AS (LH) | |
| 3. | 1Q-3691 | [2] | PLATE AS (INSIDE) | |
| 4. | 1Q-3690 | [2] | PLATE AS (OUTSIDE) | |
| 5. | 7X-0406 | [16] | BOLT (1-8X3-IN) | |
| 6. | 8C-6913 | [8] | WASHER-HARD (24X41.5X4-MM THK) | |
| 7. | 104-3495 Y | [2] | ROLLER GP-TRACK-SINGLE FLANGE | |
| 8. | 6T-4504 | [4] | CAP AS-TRACK ROLLER | |
| (EACH CAP AS INCLUDES) | ||||
| 1T-0068 | [1] | PIN-SPRING | ||
| 9. | 6T-4376 | [4] | CAP | |
| 10. | 7X-0393 | [8] | BOLT (7/8-9X6.5-IN) | |
| 11. | 8T-5361 | [16] | WASHER-HARD (28X49X5-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
