Pos.	Part No	Qty	Parts name
1.	120-5869	[2]	SPACER
2.	8T-0674 M	[30]	BOLT (M24X3X180-MM)
3.	6V-8237	[54]	WASHER (26X44X4-MM THK)
4.	8T-5397 M	[24]	BOLT (M24X3X280-MM)
5.	120-5868	[2]	SPACER
6.	8T-7811 M	[6]	BOLT-SOCKET HEAD (M12X1.75X50-MM)
7.	119-9698	[2]	COVER-WIRE
8.	118-0735	[4]	CLAMP-PLATE
9.	7X-2436 M	[8]	BOLT (M12X1.75X100-MM)
10.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
	8T-4133 M	[4]	NUT (M10X1.5-THD)
11.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
12.	7K-1181	[4]	STRAP-CABLE
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES

	M		METRIC PART

Pos.	Part No	Qty	Parts name
1.	120-5869	[2]	SPACER
2.	6V-8198 M	[30]	BOLT (M24X3.0X200MM)
3.	6V-8237	[30]	WASHER (4.0MM THK)
4.	8T-5397 M	[24]	BOLT
5.	120-5868	[2]	SPACER
6.	8T-7811 M	[6]	BOLT-SOCKET HEAD (M12X1.75X50MM)
7.	2K-9062	[8]	PIN-SPRING
8.	135-2038	[2]	PLUG-RUBBER
9.	127-9493	[2]	BRACKET
10.	135-2039	[2]	COVER
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES

	M		METRIC PART

Pos.	Part No	Qty	Parts name
1.	116-5630	[2]	SPACER
2.	8T-0674 M	[24]	BOLT (M24X3.0X180MM)
3.	6V-8237	[54]	WASHER (4.0MM THK)
4.	116-5631	[2]	SPACER
5.	8T-0365 M	[30]	BOLT (HEX HEAD)
6.	8T-7811 M	[6]	BOLT-SOCKET HEAD (M12X1.75X50MM)
7.	8T-0664 M	[24]	BOLT (M24X3X70MM)
8.	2K-9062	[8]	PIN-SPRING
9.	127-9493	[2]	BRACKET
10.	135-2038	[2]	PLUG-RUBBER
11.	135-2039	[2]	COVER
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES

	M		METRIC PART

Pos.	Part No	Qty	Parts name
1.	8T-0666 M	[60]	BOLT (M24X3.0X90MM)
2.	6V-8237	[84]	WASHER (4.0MM THK)
3.	116-5633	[2]	SPACER-FRONT
4.	116-5632	[2]	SPACER-REAR
5.	8T-0664 M	[24]	BOLT (M24X3X70MM)
6.	8T-0674 M	[24]	BOLT (M24X3.0X180MM)
7.	2K-9062	[8]	PIN-SPRING
8.	135-2038	[2]	PLUG (TRADEMARK)
9.	127-9493	[2]	BRACKET
10.	135-2039	[2]	COVER
11.	193-7311	[6]	PLUG (PROTECTIVE)
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES

	M		METRIC PART

Part No	Qty	Parts name
8T-0668 M	[30]	BOLT (M24X3.0X110MM)
6V-8198 M	[24]	BOLT (M24X3.0X200MM)
127-9493	[2]	BRACKET
135-2039	[2]	COVER
2K-9062	[8]	PIN-SPRING
135-2038	[2]	PLUG
124-3679 Y	[2]	SPACER (REAR)
124-3678 Y	[2]	SPACER (FRONT)
6V-8237	[30]	WASHER (26X44X4MM THK)

		(QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

Pos.	Part No	Qty	Parts name
1.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
2.	114-9426	[1]	STEP
3.	113-2001 M	[3]	BOLT-SOCKET HEAD (M12X1.75X25-MM)
4.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
5.	171-7184	[1]	STEP AS
6.	128-4817	[1]	BRACKET AS
	1F-0750	[4]	NUT-WELD (3/8-16-THD)
	8Q-6908 M	[2]	NUT-WELD
	M		METRIC PART

Pos.	Part No	Qty	Parts name
1.	108-6195	[2]	ROD AS
2.	4D-4431	[2]	BEARING-ALIGNING
3.	108-2571	[2]	GUIDE
4.	6V-1657	[2]	SEAL-RECTANGULAR
5.	108-2570	[2]	CYLINDER
6.	121-4588	[2]	FILM-WARNING (HIGH PRESSURE CYLINDER)
7.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
	8T-4132 M	[2]	NUT (M16X2-THD)
8.	109-0910	[2]	HARNESS AS-SWITCH (TRACK TENSION)
9.	1H-7459	[2]	GROMMET
10.	119-9718	[1]	MANIFOLD
	1P-3704	[2]	SEAL-RECTANGULAR
11.	8T-5668	[4]	RING-WEAR
12.	108-6194	[2]	SPACER (24.5X73X16-MM THK)
13.	8T-5379 M	[2]	BOLT (M24X3X50-MM)
14.	108-6213	[2]	SEAL-LIP TYPE
15.	108-7839	[2]	SEAL-U-CUP
16.	108-7841	[2]	SEAL AS-ROD
17.	3K-0360	[2]	SEAL-O-RING
18.	119-9738 B	[2]	SHIM (0.13-MM THK)
19.	6I-0149	[2]	STRAP
20.	119-9708	[4]	VALVE-NEEDLE
	5M-6708	[4]	WASHER (0.609X1.25X0.219-IN THK)
21.	107-6328	[2]	ACCUMULATOR AS
22.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
23.	8T-7547 M	[4]	BOLT (M8X1.25X30-MM)
24.	108-5985	[2]	VALVE (RUPTURE DISC-CHARGE MANIFOLD)
25.	2K-4973	[4]	LOCKNUT (3/8-16-THD)
26.	7X-2550 M	[8]	BOLT (M12X1.75X110-MM)
	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	108-7928	[2]	SUPPORT AS
28.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
	1L-1486	[2]	SPACER (0.5X0.875X0.5-IN THK)
	7X-0618	[2]	WASHER-HARD (13.5X40X5-MM THK)
29.	108-6591	[2]	PLUNGER
30.	108-6188	[2]	PIN AS
31.	108-7102	[4]	SPACER
32.	108-6191	[2]	GUARD AS
33.	8T-1447 M	[8]	BOLT-SOCKET HEAD (M16X2X70-MM)
34.	6V-0852	[2]	CAP-DUST
	6V-3966 B	[2]	FITTING AS
35.	3J-1907	[4]	SEAL-O-RING
36.	8B-6349	[4]	DOWEL
37.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
38.	6Y-4638	[2]	PLUG-HEX SOCKET (1-5/16-12-THD)
39.	6V-6757	[2]	ELBOW-PIPE
40.	108-6593	[4]	PLATE
41.	108-6594	[2]	BLOCK
42.	7X-1886	[2]	SWITCH AS-BALL
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
	7B-8451	[8]	SHIM (0.01-MM THK)
43.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
	7X-7729	[4]	WASHER (11X25X3-MM THK)
44.	9X-8257	[16]	WASHER (17.5X30X3.5-MM THK)
45.	8T-4779 M	[8]	BOLT (M16X2X35-MM)
46.	8T-4193 M	[8]	BOLT (M16X2X50-MM)
47.	108-6590	[2]	PIN
48.	108-6589	[2]	PLATE
49.	7P-7736	[2]	BUSHING
50.	108-6588	[2]	PLATE
51.	108-6592	[2]	BAR
52.	7K-9202	[2]	SEAL-LIP TYPE
53.	7S-9847	[4]	WASHER-CONICAL
54.	119-9711	[1]	MANIFOLD
55.	5P-6442 BE	[2]	HOSE (30CM EA)
56.	1P-4278	[2]	CLAMP-HOSE
57.	4S-6797	[2]	CONNECTOR
58.	7M-8485	[4]	SEAL-O-RING
59.	2S-4078	[2]	SEAL-O-RING
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH AND RH SIDES

	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

119-9697 SPACER GP S/N 8DN1-594; 1DR1-1315 1727.2 MM (68 IN.) GAUGE 45 CHALLENGER

FRAME AND BODY

119-9697: SPACER GP

Parts for your 45 CHALLENGER:

135-7840: SPACER GP

Parts for your 45 CHALLENGER:

135-7843: SPACER GP

Parts for your 45 CHALLENGER:

135-7844: SPACER GP

Parts for your 45 CHALLENGER:

135-7846: SPACER GP

Parts for your 45 CHALLENGER:

135-7847: SPACER GP

Parts for your 45 CHALLENGER:

138-0458: SPACER GP

Parts for your 45 CHALLENGER:

138-0459: SPACER GP

Parts for your 45 CHALLENGER:

104-2278: STEP GP

Parts for your 45 CHALLENGER:

104-2330: BELT TENSIONER GP

Parts for your 45 CHALLENGER:

Information:

Caterpillar Parts SIS Catalog 45 :