AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-5685 VALVE GP-WITHOUT HITCH S/N 8DN550-849; 1DR1139-1699 PART OF 108-1926 VALVE AR-3 WITHOUT HITCH 45


HYDRAULIC SYSTEM
VALVE GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH GP-3 POINT
HYDRAULIC SYSTEM
CYLINDER GP
DRAWBAR, THREE POINT HITCH AND PTO
DRAWBAR GP
HITCH AR

CHALLENGER 45 CHALLENGER 1DR
 Challenger 35 and Challenger 45 Agricultural Tractors 1DR00001-01699 (MACHINE) POWERED BY 3116 Engine SEBP2304 45 1DR   (1994)

HYDRAULIC SYSTEM

VALVE GP
VALVE GP-WITHOUT HITCH
113-5685 VALVE GP-WITHOUT HITCH
VALVE GP-WITHOUT HITCH
113-5685 VALVE GP-WITHOUT HITCH
VALVE GP-WITHOUT HITCH
113-5685 VALVE GP-WITHOUT HITCH
 

#SEBP23040430
 

113-5685: VALVE GP-WITHOUT HITCH

113-5685 VALVE GP-WITHOUT HITCH
S/N 8DN550-849; 1DR1139-1699
PART OF 108-1926 VALVE AR-3 WITHOUT HITCH
i00476685 SEBP2304
1135685 VALVE GP-WITHOUT HITCH Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-2911 Y [1] VALVE AS-REMOTE  
2. 8F-3469 [6] SEAL-O-RING  
3. 112-8420 M [1] BOLT (M16X2X230-MM)  
4. 6V-5686 M [3] BOLT (M16X2X50-MM)  
5. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
6. 3K-0360 [1] SEAL-O-RING  
7. 6V-8782 [1] TEE  
8. 6V-8398 [2] SEAL-O-RING  
9. 7M-8485 [1] SEAL-O-RING  
10. 6V-8635 [1] CONNECTOR  
11. 5K-9090 [1] SEAL-O-RING  
12. 5M-2057 [1] SEAL-O-RING  
13. 4J-5477 [2] SEAL-O-RING  
14. 132-7026 [3] CAP-DUST (LOWER)  
15. 132-7027 [3] CAP-DUST (RAISE)  
16. 103-2549 BE [2] HOSE (99CM EACH)  
17. 132-5790 M [12] BOLT-SOCKET HEAD (M8X1.25X120-MM)  
18. 137-5752 YC [2] COUPLER GP (WITH CHECK VALVE)  
    (WITH CHECK VALVE)
19. 132-7031 [5] FITTING-HOSE  
20. 132-7029 [2] PLUG  
21. 137-5751 YC [1] COUPLER GP (WITHOUT CHECK VALVE)  
    (WITHOUT CHECK VALVE)
22. 113-8567 [1] FITTING AS  
23. 6V-8554 [1] NUT (13/16-16-THD)  
24. 6V-0852 [1] CAP-DUST  
25. 6V-8397 [1] SEAL-O-RING  
26. 1P-4278 C [8] CLAMP-HOSE  
27. 6V-8936 [1] REDUCER  
28. 132-7030 [2] PLUG-VENT  
29. 132-7032 [1] UNION  
30. 5L-4758 [4] SEAL-O-RING  
31. 2J-0157 [4] SEAL-O-RING  
32. 103-2549 BE [2] HOSE (7CM EACH)  
33. 103-2549 BE HOSE (15CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23040431
 

108-1922: ADAPTER GP-WITHOUT HITCH

108-1922 ADAPTER GP-WITHOUT HITCH
S/N 8DN1-849; 1DR1-1699
i00480107 SEBP2304
1081922 ADAPTER GP-WITHOUT HITCH Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-5495 [1] ROD  
2. 9S-4191 [1] PLUG-O-RING  
3. 3J-1907 [1] SEAL-O-RING  
4. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
5. 112-8253 [2] WASHER  
6. 113-5496 [2] PLATE  
7. 4M-0189 [2] SEAL-O-RING  
  113-5497 FY [1] CAB GP (WITHOUT HITCH)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23040432
 

108-2914: CYLINDER AS-HYDRAULIC

108-2914 CYLINDER AS-HYDRAULIC
S/N 8DN1-214; 1DR1-719
12500 LB. CAPACITY. 101.6MM (4 IN)BORE X 200MM (7.9MM) STROKE
PART OF 108-1918, 108-1919 HITCH AR
i00481648 SEBP2304
1082914 CYLINDER AS-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
  9S-3263 B COMPOUND-THREAD LOCK  
2. 8M-4435 J [1] SEAL-O-RING  
3. 112-8945 [1] ROD AS-PISTON  
  [1] BUSHING  
4. 112-8946 [1] PISTON  
5. 112-8948 [1] CYLINDER AS  
6. 112-8944 [1] CYLINDER HEAD  
7. 112-8374 J [1] SEAL-OIL  
8. 112-8383 J [1] SEAL  
9. 112-8940 J [1] SEAL-O-RING  
10. 112-8479 J [1] RING-WEAR  
11. 112-8480 J [1] SEAL  
   
    AVAILABLE REPAIR KIT(S):
  112-8943 J [1] KIT-REPAIR (HITCH CYLINDER)  
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP23040433
 

108-2915: CYLINDER AS-HYDRAULIC

108-2915 CYLINDER AS-HYDRAULIC
S/N 8DN1-214; 1DR1-719
15000 LB. CAPACITY. 114.3MM (4.5 IN) BORE X 200MM (7.9 IN) STROKE
PART OF 108-1920, 108-1921 HITCH AR
i00481650 SEBP2304
1082915 CYLINDER AS-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-4435 J [1] SEAL-O-RING  
2. 113-5485 J [1] WASHER-BACKUP  
3. 113-5483 J [1] SEAL  
4. 113-5482 J [1] RING-WEAR  
5. 113-5478 [1] PISTON  
6. 112-8318 [1] LOCKNUT  
7. 113-5476 [1] CYLINDER AS  
8. 113-5477 [1] ROD AS-PISTON  
  [1] BUSHING  
9. 113-5474 J [1] SEAL (44.45-MM ID)  
10. 113-5475 J [1] SEAL (44.45-MM ID)  
11. 113-5480 [1] CYLINDER HEAD  
12. 6S-3002 J [1] SEAL-O-RING  
13. 113-5484 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  113-5481 J [1] KIT-REPAIR (HITCH CYLINDER)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP23040434
 

133-2285: CYLINDER AS-HYDRAULIC

133-2285 CYLINDER AS-HYDRAULIC
S/N 8DN215-849; 1DR720-1699
101.6 MM (4 IN.) BORE X 200 MM (7.9 IN.) STROKE
PART OF 108-1918, 108-1919, 132-4665, 132-4666 HITCH AR
i00500608 SEBP2304
1332285 CYLINDER AS-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 027-1287 [1] FITTING-GREASE  
2. 9S-3263 [1] COMPOUND-THREAD LOCK  
3. 112-8946 [1] PISTON  
4. 133-5332 [1] PISTON ROD AS  
  133-5333 [2] BUSHING  
5. 112-8944 [1] CYLINDER HEAD  
6. 112-8948 [1] CYLINDER AS  
7. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
8. 8M-4435 J [1] SEAL-O-RING  
9. 112-8374 J [1] SEAL-OIL  
10. 112-8383 J [1] SEAL  
11. 112-8479 J [1] RING-WEAR  
12. 112-8480 J [1] SEAL  
13. 112-8940 J [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  112-8943 J [1] KIT-REPAIR (HITCH CYLINDER)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP23040435
 

133-2286: CYLINDER AS-HYDRAULIC

133-2286 CYLINDER AS-HYDRAULIC
S/N 8DN215-849; 1DR720-1699
114.3MM (4.5IN) BORE X 200MM (7.9IN) STROKE
PART OF 108-1920, 108-1921, 126-9266, 132-4664 HITCH AR
i00500610 SEBP2304
1332286 CYLINDER AS-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 027-1287 [1] FITTING-GREASE  
2. 9S-3263 B COMPOUND-THREAD LOCK  
3. 113-5480 [1] CYLINDER HEAD  
4. 113-5476 [1] CYLINDER AS  
5. 113-5478 [1] PISTON  
6. 2K-0337 [1] LOCKNUT (3/4-16-THD)  
7. 8M-4435 J [1] SEAL-O-RING  
8. 6S-3002 J [1] SEAL-O-RING  
9. 113-5474 J [1] SEAL (44.45-MM ID)  
10. 113-5475 J [1] SEAL (44.45-MM ID)  
11. 113-5484 J [1] RING-WEAR  
12. 113-5482 J [1] RING-WEAR  
13. 113-5483 J [1] SEAL  
14. 113-5485 J [1] WASHER-BACKUP  
15. 133-5335 [1] PISTON ROD AS  
  133-5333 [2] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  113-5481 J [1] KIT-REPAIR (HITCH CYLINDER)  
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP23040436
 

127-3022: DRAWBAR GP

127-3022 DRAWBAR GP
S/N 8DN1-849; 1DR1-1699
i00516770 SEBP2304
1273022 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-4650 [1] PLATE AS  
2. 140-0982 [1] BRACKET AS  
3. 124-5559 [1] BLOCK  
4. 8T-8894 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
5. 7X-2563 M [6] BOLT (M20X2.5X60-MM)  
6. 8T-4123 [14] WASHER (3.62X5.75X0.375-MM THK)  
7. 129-7279 [4] BLOCK  
8. 145-5960 [1] LOCK AS  
9. 5P-0370 [4] LOCK PIN  
10. 8C-8478 M [2] BOLT (M20X2.5X140-MM)  
11. 8T-4131 M [2] NUT (M20X2.5-THD)  
12. 6K-1510 [4] STOP  
13. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
14. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
15. 113-5519 [1] SHIELD AS  
16. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
17. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 113-5522 [2] SPACER AS  
19. 113-5515 [1] RETAINER  
20. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
21. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
22. 113-5518 [1] PIN AS-HITCH  
23. 113-5514 [1] CLEVIS  
24. 113-8847 [1] TIE DOWN  
25. 7X-2565 M [2] BOLT (M20X2.5X100-MM)  
26. 142-4232 [1] DRAWBAR-OFFSET  
27. 128-6301 [1] SUPPORT AS  
28. 151-5327 [1] PIN-CLEVIS  
29. 151-5329 [1] PLATE  
30. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
31. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
32. 7X-2476 M [2] BOLT (M24X3X220-MM)  
33. 6V-7676 M [2] NUT (M24X3-THD)  
  M   METRIC PART
 

#SEBP23040437
 

108-1923: DRAWBAR GP-SWINGING

108-1923 DRAWBAR GP-SWINGING
S/N 8DN1-849; 1DR1-1699
PART OF 121-6710, 121-6720 SPECIAL AR
i00480110 SEBP2304
1081923 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
2. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
3. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
4. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
5. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
6. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
7. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
9. 6V-5845 M [6] BOLT (M20X2.5X70-MM)  
10. 113-5512 [1] HANGER AS  
11. 151-5329 [1] PLATE  
12. 113-5514 [1] CLEVIS  
13. 113-5515 [1] RETAINER  
14. 151-5327 [1] PIN-CLEVIS  
15. 113-5518 [1] PIN AS-HITCH (DRAWBAR)  
16. 113-5519 [1] SHIELD AS  
17. 142-4232 [1] DRAWBAR-OFFSET  
18. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
19. 113-5522 [2] SPACER AS  
20. 126-9017 [2] PIN-DRAWBAR  
21. 5P-0370 [2] LOCK PIN  
22. 113-8847 [1] TIE DOWN  
  M   METRIC PART
 

#SEBP23040438
 

108-1918: HITCH AR

108-1918 HITCH AR
S/N 8DN1-214; 1DR1-719
12500 LB. CAPACITY. WITHOUT ELECTRONIC DRAFT CONTROL
PART OF 121-6710, 121-6720 SPECIAL AR
i00480052 SEBP2304
1081918 HITCH AR Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-5434 [2] BOLT-SHOULDER  
2. 112-8895 [2] PIN AS  
3. 112-8898 [1] LIMITER-SWAY  
4. 3B-4629 [2] PIN-COTTER  
5. 5D-8159 [2] PIN AS  
6. 116-5617 [2] PIN-CLEVIS  
7. 108-2914 Y [2] CYLINDER AS-HYDRAULIC  
8. 112-8897 [2] BLOCK-GUIDE  
9. 112-8900 [2] SPACER  
10. 7X-2556 M [4] BOLT (M16X2X100-MM)  
11. 9X-8244 M [4] LOCKNUT  
12. 112-8890 Y [1] LINK AS-LOWER (RH)  
13. 112-8892 Y [1] LINK AS-LOWER (LH)  
14. 118-0787 AB SHIM-GUIDE  
15. 112-8899 [1] LIMITER-SWAY  
  112-8889 YF [1] LINK AS-UPPER  
  YF [1] PARTS GP-CAB  
    (WITH HITCH -W/O DRAFT CONTROL)
  112-8901 YF [1] PARTS GP-HITCH  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23040439
 

108-1918: HITCH AR

108-1918 HITCH AR
S/N 8DN215-849; 1DR720-1699
12500 LB. CAPACITY. WITHOUT ELECTRONIC DRAFT CONTROL
PART OF 121-6710, 121-6720 SPECIAL AR
i00480054 SEBP2304
1081918 HITCH AR Parts scheme
  For full view, you need register

Parts for your 45 CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-5434 [2] BOLT-SHOULDER  
2. 112-8895 [2] PIN AS  
3. 112-8898 [1] LIMITER-SWAY  
4. 3B-4629 [2] PIN-COTTER  
5. 5D-8159 [2] PIN AS  
6. 116-5617 [2] PIN-CLEVIS  
7. 133-2285 YC [2] CYLINDER AS-HYDRAULIC  
8. 112-8899 [1] LIMITER-SWAY  
9. 112-8897 [2] BLOCK-GUIDE  
10. 112-8900 [2] SPACER  
11. 7X-2556 M [4] BOLT (M16X2X100-MM)  
12. 9X-8244 M [4] LOCKNUT  
13. 112-8890 Y [1] LINK AS-LOWER (RH)  
14. 112-8892 Y [1] LINK AS-LOWER (LH)  
15. 118-0787 AB SHIM-GUIDE  
  112-8889 YF [1] LINK AS-UPPER  
  YF [1] PARTS GP-CAB  
    (WITH HITCH -W/O DRAFT CONTROL)
  112-8901 YF [1] PARTS GP-HITCH  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of 119-9737 Flow Control Group{5137}
Installation of 119-9737 Flow Control Group{5137}
Service Letter-NACD
Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors
Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Quick-Coupler Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems
Service Letter-APD
Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors
Implement Coupler Load Check Valves On Certain Challenger 35, 45, And 55 Agricultural Tractors
Service Magazine
Hydraulic Valve Groups Use New Implement Quick Couplers {6129,5057,5051}
1996/06/10
New Implement Valve Cables Improve the Resistance to Corrosion {5050, 5054}
2000/07/10

Caterpillar Parts SIS Catalog 45 :

VALVE GP-WITHOUT HITCH
113-5685 VALVE GP-WITHOUT HITCH
VALVE GP-WITHOUT HITCH
113-5685 VALVE GP-WITHOUT HITCH
VALVE GP-SOLENOID
113-3168 VALVE GP-SOLENOID
VALVE GP-REMOTE BYPASS
174-9287 VALVE GP-REMOTE BYPASS
VALVE GP-REMOTE BYPASS
174-9286 VALVE GP-REMOTE BYPASS
VALVE GP-REMOTE BYPASS
174-9180 VALVE GP-REMOTE BYPASS
VALVE GP-REMOTE BYPASS
174-9179 VALVE GP-REMOTE BYPASS
VALVE GP-PUMP CONTROL
127-9465 VALVE GP-PUMP CONTROL
ADAPTER GP-WITHOUT HITCH
108-1922 ADAPTER GP-WITHOUT HITCH
CYLINDER AS-HYDRAULIC
108-2914 CYLINDER AS-HYDRAULIC
CYLINDER AS-HYDRAULIC
108-2915 CYLINDER AS-HYDRAULIC
CYLINDER AS-HYDRAULIC
133-2285 CYLINDER AS-HYDRAULIC
CYLINDER AS-HYDRAULIC
133-2286 CYLINDER AS-HYDRAULIC
DRAWBAR GP
127-3022 DRAWBAR GP
DRAWBAR GP-SWINGING
108-1923 DRAWBAR GP-SWINGING
HITCH AR
108-1918 HITCH AR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.