COOLING SYSTEM
PUMP GP-WATERRADIATOR GP
COOLING SYSTEM
PUMP GP-WATER#SEBP23060190
7N-5909: PUMP GP-WATER
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-7767 CY | [1] | PUMP GP-WATER | |
| HELICAL TEETH ON THE DRIVE GEAR | ||||
| -OR- | ||||
| 172-7760 Y | [1] | PUMP GP-WATER | ||
| STRAIGHT TEETH ON THE DRIVE GEAR | ||||
| 2. | 5F-3106 | [1] | SEAL-O-RING | |
| 3. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 4. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23060191
7N-6208: PUMP GP-WATER
7N-6208 PUMP GP-WATER
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 1
AN ATTACHMENT
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 1
AN ATTACHMENT
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP23060192
7N-6208: PUMP GP-WATER
7N-6208 PUMP GP-WATER
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 2
AN ATTACHMENT
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 2
AN ATTACHMENT
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP23060193
7N-6208: PUMP GP-WATER
7N-6208 PUMP GP-WATER
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 3
AN ATTACHMENT
S/N 04B26769-UP
NON STANDARD PUMP WHICH HAS SIDE INLET AND SPLINE DRIVE
Type 3
AN ATTACHMENT
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP23060194
9Y-6435: PUMP GP-WATER
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-5929 | [1] | COVER-WATER PUMP | |
| 2. | 4W-3864 | [1] | SEAL AS-WATER PUMP | |
| 3. | 134-7422 | [1] | IMPELLER-PUMP | |
| 4. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 5. | 1W-4619 | [1] | HOUSING-PUMP | |
| 6. | 8C-5210 | [1] | SEAL-LIP TYPE | |
| 7. | 1K-6985 J | [1] | RING-RETAINING | |
| 8. | 6K-3771 J | [1] | BOLT-12 POINT HEAD (7/16-14X1.5-IN) | |
| 9. | 6H-3957 J | [2] | BALL BEARING | |
| 10. | 2W-7255 | [1] | SHAFT-WATER PUMP | |
| 11. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 0S-1594 J | [1] | BOLT (3/8-16X1-IN) | |
| 13. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 2W-7678 | [1] | GEAR AS (40-TEETH) | |
| 15. | 8N-5928 | [1] | GASKET | |
| 16. | 4N-5834 J | [1] | FILTER-FOAM (WATER PUMP HOUSING) | |
| 17. | 9X-6458 J | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 170-0567 J | [1] | KIT-WATER PUMP (REBUILD) | ||
| (INCLUDES SEAL GP, SHAFT, LIP SEAL, BOLT, FILTER & BALL BEARINGS) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP23060195
124-7257: RADIATOR GP
#SEBP23060196
126-1109: RADIATOR GP
126-1109 RADIATOR GP
S/N 04B26769-UP
FOR USE WITH @@@@@ 3N-5626@@@@@, @@@@@ 3N-5618@@@@@
AN ATTACHMENT
S/N 04B26769-UP
FOR USE WITH @@@@@ 3N-5626@@@@@, @@@@@ 3N-5618@@@@@
AN ATTACHMENT
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-7257 Y | [1] | RADIATOR GP | |
| 2. | 8L-4495 | [1] | SHELL AS-RADIATOR | |
| 1F-0750 | [8] | NUT-WELD (3/8-16-THD) | ||
| 3. | 9M-5733 | [24] | RIVET-POP | |
| 4. | 2L-4238 | [6] | MOUNT-FLEXIBLE | |
| 5. | 2A-4639 | [6] | BOLT (3/8-16X1.625-IN) | |
| 6. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 8L-4534 | [1] | GUARD-RADIATOR | |
| 8. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 9. | 0S-1594 | [8] | BOLT (3/8-16X1-IN) | |
| 10. | 3F-1417 | [14] | WASHER (10.3X30.2X3-MM THK) | |
| 11. | 0S-0509 | [8] | BOLT (3/8-16X0.75-IN) | |
| 12. | 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | |
| 13. | 9M-7959 | [6] | CLAMP-HOSE | |
| 14. | 8N-1633 | [1] | GUARD AS-FAN (LOWER) | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 6N-8599 | [2] | CLIP | ||
| 15. | 2W-5643 | [1] | GUARD AS-FAN (UPPER) | |
| 16. | 3H-3338 | [1] | TUBE | |
| 17. | 5P-1262 E | HOSE (15.24 CM) | ||
| 18. | 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | |
| 19. | 4L-2922 | [1] | SUPPORT AS | |
| 20. | 4L-2921 | [1] | SUPPORT AS | |
| 21. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 22. | 3N-2669 | [1] | ELBOW | |
| 23. | 3N-6033 | [1] | HOSE-PUMP INLET (LOWER RADIATOR) | |
| 24. | 8N-3272 | [1] | PLATE-LIFTING EYE | |
| 25. | 4B-3823 | [4] | BOLT (1/2-13X1.25-IN) | |
| 26. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 6N-7870 | [1] | BRACE | |
| 28. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
| 29. | 3N-6036 | [1] | HOSE (UPPER RADIATOR) | |
| 30. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 31. | 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | |
| 32. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23060197
126-8320: RADIATOR GP
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-6188 | [1] | TANK AS-RADIATOR | |
| 2. | 132-6187 | [1] | TANK AS-RADIATOR | |
| 3. | 132-6186 | [2] | BRACKET | |
| 4. | 132-6191 | [1] | GUARD AS-FAN | |
| 5. | 132-6189 | [2] | BRACKET AS | |
| 6. | 132-6185 | [2] | PLATE | |
| 7. | 131-3077 | [1] | CORE AS-RADIATOR | |
| 8. | 0S-1618 | [84] | BOLT (5/16-18X1-IN) | |
| 9. | 5S-0003 | [112] | NUT (5/16-18-THD) | |
| 10. | 0S-1617 | [8] | BOLT (5/16-18X0.75-IN) | |
| 11. | 3B-4505 | [8] | LOCKWASHER (5/16) | |
| 12. | 133-6083 | [2] | GASKET | |
| 13. | 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 1B-7182 | [20] | BOLT (5/16-18X1.25-IN) | |
| 15. | 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) |
#SEBP23060198
126-8324: RADIATOR GP
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-8320 Y | [1] | RADIATOR GP | |
| 2. | 132-9603 | [1] | HOSE (UPPER RADIATOR) | |
| 3. | 9M-7959 | [4] | CLAMP-HOSE | |
| 4. | 133-1367 | [1] | PLATE | |
| 5. | 4B-3823 | [4] | BOLT (1/2-13X1.25-IN) | |
| 6. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
| 8. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| 9. | 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | |
| 10. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 11. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 12. | 4L-2921 | [1] | SUPPORT AS | |
| 13. | 4L-2922 | [1] | SUPPORT AS | |
| 14. | 133-6518 | [1] | HOSE-RADIATOR (LOWER RADIATOR) | |
| 15. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 16. | 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | |
| 17. | 5M-2894 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 1B-2790 | [2] | BOLT (5/16-18X1.375-IN) | |
| 19. | 133-1114 | [1] | BRACKET | |
| 20. | 5M-3062 | [12] | BOLT (3/8-16X0.75-IN) | |
| 21. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 2B-2695 | [10] | BOLT (5/16-18X0.875-IN) | |
| 23. | 5S-0003 | [10] | NUT (5/16-18-THD) | |
| 24. | 132-6190 | [1] | SHROUD AS | |
| 25. | 1W-9829 | [1] | GUARD AS-FAN | |
| 26. | 5P-1075 | [12] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 27. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 28. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23060199
133-7351: RADIATOR GP
Parts for your 3304 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-7352 Y | [1] | RADIATOR GP | |
| 2. | 132-9603 | [1] | HOSE (UPPER RADIATOR) | |
| 3. | 9M-7959 | [4] | CLAMP-HOSE | |
| 4. | 133-1367 | [1] | PLATE | |
| 5. | 4B-3823 | [4] | BOLT (1/2-13X1.25-IN) | |
| 6. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
| 8. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| 9. | 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | |
| 10. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 11. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 12. | 4L-2921 | [1] | SUPPORT AS | |
| 13. | 4L-2922 | [1] | SUPPORT AS | |
| 14. | 133-6518 | [1] | HOSE-RADIATOR (LOWER RADIATOR) | |
| 15. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 16. | 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | |
| 17. | 5M-2894 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 1B-2790 | [2] | BOLT (5/16-18X1.375-IN) | |
| 19. | 133-1114 | [1] | BRACKET | |
| 20. | 132-6190 | [1] | SHROUD AS | |
| 21. | 5M-3062 | [12] | BOLT (3/8-16X0.75-IN) | |
| 22. | 5P-1075 | [12] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 23. | 9M-1974 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 2B-2695 | [10] | BOLT (5/16-18X0.875-IN) | |
| 25. | 5S-0003 | [10] | NUT (5/16-18-THD) | |
| 26. | 1W-9829 | [2] | GUARD AS-FAN | |
| 27. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 28. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
COOLING SYSTEM
PUMP GP-WATER
Engine News
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01
1978/03/01
Special Instruction
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Technical Information Bulletin
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Specifications
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Reuse And Salvage Guidelines
Information Release Memo
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3304 :
Truck sale:
650
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
- Quick connectors
MILTON CAT
17.000
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
- Stationary Generator Sets
EMPIRE MACHINERY



