AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-6268 PUMP GP-GOV & FUEL INJ S/N 04B26769-UP PART OF 6N-6211 PUMP GP-GOV & FUEL INJ 3304 INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP
SEPARATOR GP-WATER
SHUTOFF GP
ENCLOSURES, GUARDS AND BASES
BASE GP
FUEL SYSTEM
TORQUE CONTROL GP

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 Industrial Engine 04B26769-UP SEBP2306 3304 04B   (1968)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
6N-5356 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-6211 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-6268 PUMP GP-GOV & FUEL INJ
6N-7605 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-7821 PUMP GP-GOV & FUEL INJ
 

#SEBP23060290
 

6N-6268: PUMP GP-GOV & FUEL INJ

6N-6268 PUMP GP-GOV & FUEL INJ
S/N 04B26769-UP
PART OF 6N-6211 PUMP GP-GOV & FUEL INJ
i00768380 SEBP2306
6N6268 PUMP GP-GOV & FUEL INJ Parts scheme 6N6268 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2820 [1] LEVER AS  
2. 2W-1626 [1] GASKET  
3. 3N-9633 [1] LEVER AS  
  5H-8985 [1] PIN-SPRING  
4. 3N-2815 [1] SHAFT-SHUTOFF  
5. 9F-1707 [1] BOLT (10-24-THD)  
6. 3N-2824 [1] LEVER AS  
7. 6N-0265 [1] DOWEL  
8. 4N-4350 [1] COVER-SIDE  
  4N-9056 [1] GASKET-COVER  
9. 2N-2658 [1] BOLT-SOCKET HEAD (8-32X15.88-MM)  
10. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
11. 4N-5490 [1] BASE AS-FUEL FILTER  
12. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
13. 6N-2843 [1] GASKET  
14. 9F-6580 [2] BOLT (1/4-20X1.125-IN)  
15. 4N-9336 [1] DISC  
16. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET-ELBOW  
17. 0S-1615 [11] BOLT (1/4-20X0.75-IN)(1/4-20X.75 IN)  
18. 8S-4710 [1] BOLT (1/4-20X4-IN)  
19. 7N-0450 [1] VALVE AS  
20. 6N-2810 [1] CHANNEL  
  4N-4431 [1] GASKET-CHANNEL  
21. 9S-4180 [1] PLUG  
22. 4J-7533 [1] SEAL-O-RING  
23. 6N-0248 [1] SHAFT AS-CONTROL  
24. 4N-0159 [1] GASKET  
25. 7N-3094 [1] ADAPTER AS  
26. 4N-9467 [2] BEARING  
27. 3N-2813 [1] SEAL-LIP TYPE  
28. 4N-8507 [2] COVER  
  4N-0117 [2] GASKET-SOLENOID  
29. 2A-0762 [4] BOLT (1/4-20X0.625-IN)(1/4-20X625IN)  
30. 6N-4654 Y [1] CONTROL GP-FUEL RATIO  
31. 6L-5773 [1] GASKET  
32. 4N-0444 [2] PLATE-SPACER  
33. 9S-8597 [1] SPRING  
34. 4N-8179 [1] PIN-DETENT  
35. 4L-3776 [1] BOLT (1/4-20X4.75-IN)  
36. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
37. 6N-6597 [1] GASKET  
38. 7N-3096 [1] BASE-ADAPTER  
39. 0S-1615 [1] BOLT (1/4-20X0.75-IN)(1/4-20X.75IN)  
40. 9S-9332 [1] FITTING-ELBOW  
41. 8F-6302 [1] BOLT (1/4-20X3.75-IN)  
42. 6N-5933 [1] COVER-SHUTOFF  
43. 0S-1616 [2] BOLT (1/4-20X1-IN)  
44. 6N-7523 [2] WASHER (6.48X11.9X1.57-MM THK)  
45. 2M-5471 [2] BOLT  
46. 6N-5356 Y [1] PUMP GP-GOV & FUEL INJ  
47. 4F-7957 [3] BOLT (1/4-20X0.875-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23060291
 

6N-7605: PUMP GP-GOV & FUEL INJ

6N-7605 PUMP GP-GOV & FUEL INJ
S/N 04B26769-UP
FIELD REPLACEMENT FOR @@@@@ 6N-6211@@@@@
FIELD INSTALLATION
i00748799 SEBP2306
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-7821 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23060292
 

6N-7821: PUMP GP-GOV & FUEL INJ

6N-7821 PUMP GP-GOV & FUEL INJ
S/N 04B26769-UP
PART OF 6N-7605 PUMP GP-GOV & FUEL INJ
i00773238 SEBP2306
6N7821 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [2] BOLT (1/4-20X4-IN)  
2. 4N-0053 [1] COVER-ADAPTER  
  4N-0159 [1] GASKET  
3. 0S-1616 [1] BOLT (1/4-20X1-IN)  
4. 6N-2843 [1] GASKET  
5. 4N-5490 [1] BASE AS-FUEL FILTER  
6. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
7. 9S-8597 [1] SPRING  
8. 6N-0509 Y [1] TORQUE CONTROL GP  
9. 6N-5356 Y [1] PUMP GP-GOV & FUEL INJ  
10. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
11. 4N-9336 [1] DISC  
12. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET-ELBOW  
13. 0S-1615 [11] BOLT (1/4-20X0.75-IN)  
14. 9F-6580 [2] BOLT (1/4-20X1.125-IN)  
15. 8S-4710 [1] BOLT (1/4-20X4-IN)  
16. 6D-0238 [1] VALVE AS  
17. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
18. 4N-4431 [1] GASKET-CHANNEL  
  6N-2810 [1] CHANNEL  
19. 4N-4350 [1] COVER-SIDE  
  4N-9056 [1] GASKET-COVER  
20. 4N-0443 [1] PIN-LOAD STOP  
21. 4N-4224 [1] SPRING  
22. 6N-0248 [1] SHAFT AS-CONTROL  
23. 4N-0444 [2] PLATE-SPACER  
24. 4N-8179 [1] PIN-DETENT  
25. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23060293
 

2W-4234: SEPARATOR GP-WATER

2W-4234 SEPARATOR GP-WATER
S/N 04B26769-UP
FOR USE WITH MARINE PROPULSION AND MARINE AUXILIARY ENGINES
AN ATTACHMENT
i00359085 SEBP2306
2W4234 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4235 [1] BASE AS  
2. 8N-1590 [1] WASHER  
3. 8F-9206 [1] SEAL-O-RING  
4. 8N-1588 [1] BOLT-SEPARATOR  
5. 2W-4273 [1] VALVE AS-VENT (FUEL, WATER SEPARATOR)  
6. 8N-1589 [1] GASKET-SEPARATOR  
7. 2W-4236 [1] CASE AS  
8. 5B-7890 [1] PLUG-PIPE  
9. 8N-1586 [1] SPRING-SEPARATOR  
10. 4B-4281 [1] WASHER (16.8X33X2.5-MM THK)  
11. 8F-4610 [1] RING-RETAINING  
12. 8N-1587 [1] SUPPORT  
13. 8N-1585 [1] SEAL-SEPARATOR  
14. 8N-0205 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
 

#SEBP23060294
 

5N-5284: SEPARATOR GP-WATER

5N-5284 SEPARATOR GP-WATER
S/N 04B26769-UP
CANNOT BE USED WITH RH OIL FILTER
AN ATTACHMENT
i00385430 SEBP2306
5N5284 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 C [1] CLAMP  
2. 8K-0968 C [1] ELBOW  
3. 2W-4331 CI [1] HOSE AS  
4. 7J-8611 B [1] ELBOW-PIPE (PIPE)  
  032-1268 B [1] CONNECTOR (90-DEG)(FLARED)  
    -OR-
  032-1267 B [1] CONNECTOR (STRAIGHT)  
5. 1J-9671 [5] SEAL-O-RING  
6. 5P-4675 [1] ADAPTER  
7. 5N-5283 [1] BRACKET-SUPPORT  
8. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
9. 6V-2611 C [2] VALVE (DRAIN)(WATER SEPARATOR)  
10. 8N-9801 C [1] BASE-SEPARATOR  
11. 9S-8003 C [1] PLUG (1/2-20-THD)  
12. 8N-9803 C [1] FILTER-FUEL (WATER SEPARATOR)(WATER SEPARATOR)  
13. 5P-5991 G HOSE (28 IN.)  
  6L-8700 [1] CLAMP  
14. 0L-1352 B [3] BOLT (3/8-16X3.25-IN)  
  1M-7163 [3] SPACER  
15. 1D-4717 B [8] NUT (3/8-16-THD)  
16. 5M-2894 BC [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 5M-8429 C [1] CLIP  
18. 0T-0102 C [1] BOLT (3/8-16X0.625-IN)  
19. 0L-1143 B [3] BOLT (3/8-16X2.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP23060295
 

9N-6519: SEPARATOR GP-WATER

9N-6519 SEPARATOR GP-WATER
S/N 04B26769-UP
AN ATTACHMENT
i00439149 SEBP2306
9N6519 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 [1] CLAMP  
2. 8N-9801 [1] BASE-SEPARATOR  
3. 6V-2611 [2] VALVE (DRAIN)(WATER)  
4. 3K-8460 [2] PLUG (1/2-20-THD)  
5. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
6. 5P-4675 [2] ADAPTER  
7. 1J-9671 [6] SEAL-O-RING  
 

#SEBP23060296
 

6N-2554: SHUTOFF GP-MANUAL

6N-2554 SHUTOFF GP-MANUAL
S/N 04B26769-UP
GOVERNOR
AN ATTACHMENT
i00406999 SEBP2306
6N2554 SHUTOFF GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2825 [1] LEVER-SHUTOFF  
2. 7J-9018 [1] BOLT-SOCKET HEAD (10-24X0.625-IN)  
 

#SEBP23060297
 

3N-8066: TANK & BASE GP-FUEL

3N-8066 TANK & BASE GP-FUEL
S/N 04B26769-UP
FOR USE WITH ELECTRIC SET
AN ATTACHMENT
i00366805 SEBP2306
3N8066 TANK & BASE GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [6] BOLT (5/8-11X2-IN)  
  4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
  1D-4720 [6] NUT (5/8-11-THD)  
2. 4B-5441 [1] CAP AS-FILLER (FUEL)  
3. 3F-4134 [1] BAFFLE (FUEL TANK FILL CAP)  
4. 4B-5423 [1] GASKET  
5. 4B-5949 [2] FILTER ELEMENT-FUEL (FUEL CAP)  
6. 3H-8389 [1] SCREW-FILLER CAP  
7. 2A-1763 [1] GASKET-CAP  
8. 7B-2002 [1] WASHER (10.2X44.5X3-MM THK)  
9. 4B-6067 [2] ELBOW-STREET  
10. 4L-2912 [1] TANK & BASE AS-FUEL  
11. 5B-1309 [2] COUPLING-PIPE  
12. 3B-0342 [1] PLUG-PIPE  
13. 5L-8259 [1] TUBE AS-FILLER  
14. 4L-2925 [1] PLUNGER  
 

#SEBP23060298
 

6N-0509: TORQUE CONTROL GP

6N-0509 TORQUE CONTROL GP
S/N 04B26769-UP
PART OF 6N-6211, 6N-7821 PUMP GP-GOV & FUEL INJ
i00405651 SEBP2306
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT (1/4-20X1.25-IN)  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM (1/4-28-THD)  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL (1/4-20-THD)  
 

#SEBP23060299
 

6N-3730: TORQUE CONTROL GP

6N-3730 TORQUE CONTROL GP
S/N 04B26769-UP
AN ATTACHMENT
i00722510 SEBP2306
6N3730 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL (1/4-20-THD)  
2. 4L-7124 [1] BOLT (1/4-20X1.25-IN)  
3. 4N-3882 [1] CONTACT-STOP  
4. 8M-9064 [1] SHIM-SPRING (1.63MM THK)  
5. 1P-6452 [2] INSULATOR  
6. 9L-7235 [3] SHIM (0.040-IN THK)  
7. 4N-7777 [3] SPACER (.26MM THK)  
8. 4N-9098 [1] SPACER (12.7MM THK)  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 9S-9662 [1] SPRING-TORQUE (.46MM THK)  
11. 8L-8601 [6] SPACER (0.058-MM THK)  
12. 9L-9347 [1] SHIM (.51MM THK)  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
1978/05/29
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3304 :

PUMP GP-GOV & FUEL INJ
6N-6211 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5356 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
8N-3569 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
7C-9760 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
6N-0129 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-9615 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7N-8065 LINES GP-FUEL INJECTION
6N-7605 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-7821 PUMP GP-GOV & FUEL INJ
SEPARATOR GP-WATER
2W-4234 SEPARATOR GP-WATER
SEPARATOR GP-WATER
5N-5284 SEPARATOR GP-WATER
SEPARATOR GP-WATER
9N-6519 SEPARATOR GP-WATER
SHUTOFF GP-MANUAL
6N-2554 SHUTOFF GP-MANUAL
TANK & BASE GP-FUEL
3N-8066 TANK & BASE GP-FUEL
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.