AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

117-1391 WIRING GP-CAB S/N 9JK471-99999 PART OF 117-1404 CANOPY AR-OPEN ROPS 970F WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEEL LOADER 970F WHEEL LOADER 9JK
 970F Wheel Loader 9JK00359-UP (MACHINE) POWERED BY 3306 Engine SEBP2307 970F 9JK   (1992)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
116-6883 WIRING GP-CAB
WIRING GP-CAB
117-1391 WIRING GP-CAB
WIRING GP-CAB
117-1391 WIRING GP-CAB
WIRING GP-ENGINE
107-0038 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0038 WIRING GP-ENGINE
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
 

#SEBP23070220
 

117-1391: WIRING GP-CAB

117-1391 WIRING GP-CAB
S/N 9JK471-99999
PART OF 117-1404 CANOPY AR-OPEN ROPS
i00685896 SEBP2307
1171391 WIRING GP-CAB Parts scheme 1171391 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-2811 [1] HARNESS AS-CAB (UPPER)  
2. 8T-4133 M [4] NUT (M10X1.5-THD)  
3. 8M-2770 [6] CLIP (LOOP)  
4. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
6. 117-1387 [1] HARNESS AS-CAB (MAIN-LOWER)  
7. 4P-8134 [3] CLIP (LADDER)  
8. 7K-1181 [7] STRAP-CABLE  
9. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
10. 3S-2093 [3] STRAP-CABLE  
11. 4P-7581 [2] CLIP (LADDER)  
12. 112-5148 Y [1] CONTROL GP-AUTOSHIFT  
13. 5C-9553 M [4] BOLT (M6X1X16-MM)  
14. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
15. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES WEDGE)
16. 8T-8737 [14] PLUG-SEAL  
17. 102-4130 [1] GASKET  
18. 102-4129 [1] PLATE AS  
19. 8T-4138 M [4] BOLT (M6X1X20-MM)  
20. 8T-9405 M [12] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
21. 096-6166 [12] WASHER-HARD (4.5X9X1-MM THK)  
22. 5C-8312 M [12] NUT (M4X0.7-THD)  
23. 5P-7657 BD SEAL  
24. 110-0553 [1] WIRE AS  
25. 109-6280 [1] PLUG AS  
26. 9X-2043 M [8] SCREW-TRUSS HEAD (M6X1X14-MM)  
27. 8M-2770 [2] CLIP (LOOP)  
28. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
30. 4P-8134 [1] CLIP (LADDER)  
31. 7K-1181 [4] STRAP-CABLE  
32. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
33. 3S-2093 [6] STRAP-CABLE  
34. 4P-7581 [2] CLIP (LADDER)  
35. 098-8968 [4] WASHER (5X16X1.2-MM THK)  
36. 6D-9331 [6] WASHER (5X9X74-MM THK)  
37. 9D-7303 [2] GROMMET  
38. 9F-8125 [4] LOCKWASHER  
39. 4B-2048 [4] NUT (10-32-THD)  
40. 6D-6146 [2] SCREW-MACHINE (10-32X1.25-IN)  
41. 4V-4164 [4] BUSHING-TERMINAL  
42. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 8T-4244 M [1] NUT (M12X1.75-THD)  
44. 111-9855 [1] BRACKET AS  
  105-2797 [4] BOSS  
45. 4E-4687 [1] PLATE AS  
  3T-0049 [2] CLIP  
46. 4E-4686 [1] PLATE  
47. 9G-3695 [5] PLUG-SEAL  
48. 9G-3672 [1] HOUSING AS-CONNECTOR  
49. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES WEDGE)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070221
 

107-0038: WIRING GP-ENGINE

107-0038 WIRING GP-ENGINE
S/N 9JK359-678
PART OF 105-6031 CHASSIS AR
i00190137 SEBP2307
1070038 WIRING GP-ENGINE Parts scheme 1070038 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2770 [5] CLIP (LOOP)  
2. 9X-3495 [2] CLIP AS  
3. 3E-5370 [1] SENSOR GP-TEMPERATURE (WATER)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  9X-1813 EB SLEEVE  
4. 3J-1907 [2] SEAL-O-RING  
5. 8T-3285 [1] ADAPTER  
6. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
7. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
8. 107-0107 [1] HARNESS AS-ENGINE (RH)  
9. 8M-2773 [1] CLIP (LOOP)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
12. 8T-4835 [1] BOLT (1/2-13X2-IN)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 3S-2093 [2] STRAP-CABLE  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 5K-0906 [1] BOLT (5/16-18X0.625-IN)  
17. 6W-8946 [1] STRIP AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
18. 9G-9150 [1] CLIP  
19. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 9M-8406 [1] CLIP (LOOP)  
21. 3E-5370 [1] SENSOR GP-TEMPERATURE (TRANS)  
22. 8M-2770 [2] CLIP (LOOP)  
23. 3J-1907 [1] SEAL-O-RING  
24. 8T-3285 [1] ADAPTER  
25. 9W-8765 [1] PLATE  
26. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
27. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
28. 8M-2773 [1] CLIP (LOOP)  
29. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
31. 3S-2093 [3] STRAP-CABLE  
32. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
33. 6W-8946 [1] STRIP AS  
34. 9G-9150 [2] CLIP  
35. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 9X-0378 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
37. 4L-6454 [1] BOLT (3/8-16X1-IN)  
38. 6V-8801 [1] NUT (3/8-16-THD)  
39. 9G-9154 [1] CLIP  
40. 6D-4246 [2] CLIP (LOOP)  
41. 9M-8406 [4] CLIP (LOOP)  
42. 6T-2217 [1] RESISTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
43. 108-5617 [1] HARNESS AS  
44. 8M-2771 [1] CLIP  
45. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
46. 107-1007 [1] HARNESS AS-TRANSMISSION  
47. 3E-7886 [1] SENSOR GP-SPEED  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-1386 EB SLEEVE  
48. 1S-6420 [1] CLIP  
  5P-3413 AB SEALANT-PIPE (50-ML TUBE)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP23070222
 

107-0038: WIRING GP-ENGINE

107-0038 WIRING GP-ENGINE
S/N 9JK679-99999
PART OF 105-6031 CHASSIS AR
i00190136 SEBP2307
1070038 WIRING GP-ENGINE Parts scheme 1070038 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2770 [5] CLIP (LOOP)  
2. 9X-3495 [2] CLIP AS  
3. 131-0784 [1] SENSOR GP-TEMPERATURE  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8731 [1] PLUG-CONNECTOR (3-PIN)  
  112-4550 BE SLEEVE  
4. 3J-1907 [2] SEAL-O-RING  
5. 8T-3285 [1] ADAPTER  
6. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
7. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
8. 107-0107 [1] HARNESS AS-ENGINE (RH)  
9. 8M-2773 [1] CLIP (LOOP)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
12. 8T-4835 [1] BOLT (1/2-13X2-IN)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 3S-2093 [2] STRAP-CABLE  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 5K-0906 [1] BOLT (5/16-18X0.625-IN)  
17. 6W-8946 [1] STRIP AS  
  9F-2978 [1] NUT-WELD (3/8-16-THD)  
18. 9G-9150 [1] CLIP  
19. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 9M-8406 [1] CLIP (LOOP)  
21. 3E-5370 [1] SENSOR GP-TEMPERATURE (TRANS)  
22. 8M-2770 [2] CLIP (LOOP)  
23. 3J-1907 [1] SEAL-O-RING  
24. 8T-3285 [1] ADAPTER  
25. 9W-8765 [1] PLATE  
26. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
27. 4M-0061 [2] BOLT (5/16-18X0.75-IN)  
28. 8M-2773 [1] CLIP (LOOP)  
29. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
31. 3S-2093 [3] STRAP-CABLE  
32. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
33. 6W-8946 [1] STRIP AS  
34. 9G-9150 [2] CLIP  
35. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 9X-0378 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
37. 4L-6454 [1] BOLT (3/8-16X1-IN)  
38. 6V-8801 [1] NUT (3/8-16-THD)  
39. 9G-9154 [1] CLIP  
40. 6D-4246 [2] CLIP (LOOP)  
41. 9M-8406 [4] CLIP (LOOP)  
42. 6T-2217 [1] RESISTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
43. 145-0070 [1] HARNESS AS  
44. 8M-2771 [1] CLIP  
45. 4B-4863 [1] WASHER (4.7X11X1.2-MM THK)  
46. 107-1007 [1] HARNESS AS-TRANSMISSION  
47. 3E-7886 [1] SENSOR GP-SPEED  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  9X-1386 EB SLEEVE  
48. 1S-6420 [1] CLIP  
  5P-3413 AB SEALANT-PIPE (50-ML TUBE)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP23070223
 

107-0018: WIRING GP-FRONT

107-0018 WIRING GP-FRONT
S/N 9JK359-470
PART OF 105-6031 CHASSIS AR
i00189350 SEBP2307
1070018 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-5859 [1] HORN  
2. 6D-4246 [2] CLIP (LOOP)  
3. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [7] NUT (3/8-16-THD)  
5. 9X-3495 [1] CLIP AS  
6. 6T-6962 [2] WIRE AS  
7. 3T-3048 [2] CLIP AS  
8. 3S-2093 [6] STRAP-CABLE  
9. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 4K-8864 [8] CLIP (LOOP)  
13. 9G-9152 [1] CLIP  
14. 9D-3769 [4] GROMMET  
15. 7I-3521 [1] HARNESS AS  
16. 4V-1939 [4] CLAMP  
17. 5V-6439 [2] PLATE  
18. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
19. 3T-3045 [2] CLIP AS  
20. 9M-8406 [4] CLIP (LOOP)  
21. 4D-7794 [1] CLIP  
22. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
23. 9K-0700 [2] GROMMET  
24. 111-8986 [1] HARNESS AS-HITCH  
25. 9M-4972 [2] CLIP (LOOP)  
26. 033-8248 [1] CLIP (LOOP)  
27. 092-9741 [3] GROMMET  
28. 6C-1596 [1] HARNESS AS  
29. 6C-1595 [2] HARNESS AS  
30. 111-8983 [1] HARNESS AS-FRONT  
  M   METRIC PART
 

#SEBP23070224
 

107-0018: WIRING GP-FRONT

107-0018 WIRING GP-FRONT
S/N 9JK471-641
PART OF 105-6031 CHASSIS AR
i00189351 SEBP2307
1070018 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-5859 [1] HORN  
2. 6D-4246 C [2] CLIP (LOOP)  
3. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 [7] NUT (3/8-16-THD)  
5. 9X-3495 [1] CLIP AS  
6. 6C-1595 [2] HARNESS AS  
7. 111-8983 [1] HARNESS AS-FRONT  
8. 3S-2093 C [4] STRAP-CABLE  
9. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 4K-8864 [8] CLIP (LOOP)  
13. 9G-9152 [1] CLIP  
14. 9D-3769 [4] GROMMET  
15. 7I-3521 [1] HARNESS AS  
16. 4V-1939 [4] CLAMP  
17. 5V-6439 [2] PLATE  
18. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
19. 3T-3045 [2] CLIP AS  
20. 9M-8406 [4] CLIP (LOOP)  
21. 4D-7794 [1] CLIP  
22. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
23. 9K-0700 [2] GROMMET  
24. 111-8986 [1] HARNESS AS-HITCH  
25. 9M-4972 [2] CLIP (LOOP)  
26. 033-8248 [1] CLIP (LOOP)  
27. 092-9741 [3] GROMMET  
28. 6C-1596 [2] HARNESS AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23070225
 

107-0018: WIRING GP-FRONT

107-0018 WIRING GP-FRONT
S/N 9JK642-99999
PART OF 105-6031 CHASSIS AR
i00189352 SEBP2307
1070018 WIRING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-6559 [1] HORN AS  
2. 6D-4246 [2] CLIP (LOOP)  
3. 8T-4896 C [17] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 C [8] NUT (3/8-16-THD)  
5. 9X-3495 [1] CLIP AS  
6. 6C-1595 [2] HARNESS AS  
7. 111-8983 [1] HARNESS AS-FRONT  
8. 3S-2093 [4] STRAP-CABLE  
9. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [1] NUT (M10X1.5-THD)  
12. 4K-8864 [8] CLIP (LOOP)  
13. 9G-9152 [1] CLIP  
14. 9D-3769 [4] GROMMET  
15. 7I-3521 [1] HARNESS AS  
16. 4V-1939 [4] CLAMP  
17. 5V-6439 [2] PLATE  
18. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
19. 3T-3045 [2] CLIP AS  
20. 9M-8406 [4] CLIP (LOOP)  
21. 4D-7794 [1] CLIP  
22. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
23. 9K-0700 [2] GROMMET  
24. 111-8986 [1] HARNESS AS-HITCH  
25. 3T-0050 C [2] CLIP  
26. 033-8248 [1] CLIP (LOOP)  
27. 092-9741 [3] GROMMET  
28. 6C-1596 [2] HARNESS AS  
29. 9B-7237 C [1] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23070226
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9JK359-UP
PART OF 110-5698 MONITOR AR-PAYLOAD
Type 1
i00189389 SEBP2307
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [2] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-8915 [8] BOLT (3/8-16X3.25-IN)  
10. 4J-0520 [2] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [2] ROD END  
19. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
20. 2M-2292 [1] ROD  
21. 8W-0580 [1] BLOCK  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 110-8190 Y [1] SENSOR GP-POSITION (LIFT)  
39. 111-5684 [1] ADAPTER  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9S-4181 [1] PLUG (1-5/16-12-THD)  
45. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
46. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
47. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
48. 7X-7877 BE STRIP-EDGE  
49. 6C-8636 [1] COVER  
50. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
51. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
52. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
53. 7M-8485 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070227
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9JK359-UP
PART OF 110-5698 MONITOR AR-PAYLOAD
Type 2
i00189390 SEBP2307
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-2040 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [2] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 C [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 C [1] ROD END  
19. 4F-2294 C [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 C [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 CM [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 110-8190 Y [1] SENSOR GP-POSITION (LIFT)  
39. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
45. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
46. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
47. 7X-7877 E STRIP-EDGE (30CM)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
52. 114-1766 [1] ROD  
53. 5P-9683 C [1] ROD END (29.74MM ID)  
54. 8L-4496 C [1] NUT-JAM (5/16-24 LH-THD)  
55. 9W-0202 C [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070228
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9JK471-UP
PART OF 128-3791 MONITOR AR-PAYLOAD
i00189391 SEBP2307
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4672 CY [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 C [3] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [1] ROD END  
19. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 M [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 123-7416 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 109-0235 [1] BOX AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
42. 109-0236 [1] COVER  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 9X-2616 M [4] SCREW-SOCKET (M8X1.25X16-MM)  
45. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
46. 111-3410 [1] CONTROL GP-MONITOR (PAYLOAD CONTROL)  
47. 7X-7877 E STRIP-EDGE (30CM)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
50. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
52. 114-1766 [1] ROD  
53. 5P-9683 [1] ROD END (29.74MM ID)  
54. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
55. 9W-0202 [1] FILM-INFORMATION (PAYLOAD MEASUREMENT)  
56. 122-2222 C [1] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070229
 

110-8674: WIRING GP-PAYLOAD SENSOR

110-8674 WIRING GP-PAYLOAD SENSOR
S/N 9JK359-99999
PART OF 128-3791, 130-5198 MONITOR AR-PAYLOAD
i00189392 SEBP2307
1108674 WIRING GP-PAYLOAD SENSOR Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4672 Y [1] SENSOR GP-PRESSURE (LIFT CYLINDER)  
2. 8W-5641 I [1] HOSE AS  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-8636 [1] CONNECTOR  
5. 6V-8397 [3] SEAL-O-RING  
6. 4E-2448 [1] BRACKET  
7. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 101-3677 [1] ADAPTER  
10. 4J-0520 [1] SEAL-O-RING  
11. 6V-9200 [1] ELBOW  
12. 3J-7354 [1] SEAL-O-RING  
13. 6K-0806 [5] STRAP-CABLE  
14. 6V-8801 [5] NUT (3/8-16-THD)  
15. 5P-1075 [7] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 7I-3235 [1] GUARD  
17. 100-3983 [1] ARM-RAIL  
18. 8K-1253 [1] ROD END  
19. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
20. 4L-6459 [8] BOLT (3/8-16X2.5-IN)  
21. 8T-5005 M [8] BOLT (M10X1.5X70-MM)  
22. 9X-2480 M [3] BOLT (M6X1X45-MM)  
23. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
24. 8C-5607 [6] MOUNT-ISOLATION  
25. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 4E-2250 [1] HOUSING  
28. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
31. 6S-4868 [1] LEVER  
32. 4E-2453 [1] SHAFT  
33. 6D-3025 [2] BALL BEARING  
34. 2L-6726 [2] RING-RETAINING  
35. 2H-3429 [1] RING-RETAINING  
36. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
37. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
38. 123-7416 Y [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4896 C [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 122-2222 [1] ADAPTER  
42. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
43. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
44. 6C-8640 [1] SUPPORT AS  
  7B-2564 [2] LUG  
45. 114-1766 [1] ROD  
46. 5P-9683 [1] ROD END (29.74MM ID)  
47. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
48. 6C-8636 [1] COVER  
49. 4M-5281 [2] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 970F :

WIRING GP-CAB
117-1391 WIRING GP-CAB
WIRING GP-CAB
116-6883 WIRING GP-CAB
WIRING GP-CAB
111-1249 WIRING GP-CAB
WIRING GP-CAB
111-1249 WIRING GP-CAB
WIRING GP-CAB
108-8224 WIRING GP-CAB
WIRING GP-CAB
108-8224 WIRING GP-CAB
WIRING GP-CAB
107-3025 WIRING GP-CAB
WIRING GP-CAB
107-3025 WIRING GP-CAB
WIRING GP-ENGINE
107-0038 WIRING GP-ENGINE
WIRING GP-ENGINE
107-0038 WIRING GP-ENGINE
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-FRONT
107-0018 WIRING GP-FRONT
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR
WIRING GP-PAYLOAD SENSOR
110-8674 WIRING GP-PAYLOAD SENSOR

Truck sale:

 
 
CAT 970F

RD Williams Parts
2017 CAT 970F
 
2017 CAT 970F

Pickett Equipment Parts
CAT 970F
USD $58,000 
CAT 970F

RP Equipment
Allentown, Pennsylvania
CAT 970F
USD $57,000 
CAT 970F

RP Equipment
Allentown, Pennsylvania
1995 CAT 970F
USD $45,000 
1995 CAT 970F

AAA Machinery Parts & Rentals
Doral, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.