AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

165-4075 CONTROL GP-MONITOR -PAYLOAD S/N 9JK359-99999 PART OF 112-1572 CONTROL GP-MONITOR 970F WHEEL LOADER


OPERATOR STATION
MONITOR GP
CONTROL GP-PILOT OPERATED HYD
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION

WHEEL LOADER 970F WHEEL LOADER 9JK
 970F Wheel Loader 9JK00359-UP (MACHINE) POWERED BY 3306 Engine SEBP2307 970F 9JK   (1992)

OPERATOR STATION

MONITOR GP
112-1572 CONTROL GP-MONITOR
152-2667 CONTROL GP-MONITOR
CONTROL GP-MONITOR
165-4075 CONTROL GP-MONITOR
MODULE GP-QUAD GAUGE
100-5895 MODULE GP-QUAD GAUGE
MODULE GP-QUAD GAUGE
166-6928 MODULE GP-QUAD GAUGE
MODULE GP-SPEEDOMETER & TACH
100-5888 MODULE GP-SPEEDOMETER & TACH
 

#SEBP23070510
 

165-4075: CONTROL GP-MONITOR

165-4075 CONTROL GP-MONITOR -PAYLOAD
S/N 9JK359-99999
PART OF 112-1572 CONTROL GP-MONITOR
i01112540 SEBP2307
1654075 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3078 [1] SEAL-O-RING  
2. 129-9690 [1] COVER  
3. 101-1785 [1] BATTERY (LITHIUM)  
4. 165-4076 [1] SOFTWARE GP-MONITOR (PAYLOAD)  
 

#SEBP23070511
 

9U-0510: CONTROL GP-PILOT OPERATED HYD

9U-0510 CONTROL GP-PILOT OPERATED HYD -2-FUNCTION
S/N 9JK359-UP
PART OF 106-2355, 106-2435, 117-1400, 117-1405 OPERATOR AR, 106-3059, 121-9295 OPERATOR AR-NON-ROPS
i00188065 SEBP2307
9U0510 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8625 [1] ELBOW  
2. 3K-0360 [1] SEAL-O-RING  
3. 6V-9850 [1] ELBOW (90 DEGREE)  
4. 9X-2040 M [4] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
5. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
6. 6V-8636 C [5] CONNECTOR  
7. 3J-1907 [8] SEAL-O-RING  
8. 6V-8397 [3] SEAL-O-RING  
9. 102-1810 [1] SHEET  
10. 102-1811 [1] GASKET  
11. 6E-5019 Y [1] VALVE GP-PILOT (2-FUNCTION)  
12. 7Y-3173 M [4] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
13. 113-0958 [2] KNOB  
14. 8T-4244 CM [2] NUT (M12X1.75-THD)  
15. 113-0957 [2] ROD  
16. 6V-8724 [2] ELBOW  
17. 102-1953 [1] VALVE-BALL (90-DEG, 3/4-16-THD)  
18. 8C-0564 C [1] CONNECTOR  
19. 9C-1250 I [1] HOSE AS  
20. 113-0905 [1] LEVER  
21. 3S-2093 C [6] STRAP-CABLE  
22. 6V-9492 M [1] SCREW-MACHINE (M4X0.7X25-MM)  
  7Y-3282 [1] WASHER (1.6-MM THK)  
23. 4E-7822 C [1] CONTROL GP-HANDLE  
24. 106-4540 C [1] ROD  
25. 8T-6885 CBE TUBE-HEAT SHRINK (19.05-MM DIA)(7 CM)  
26. 8L-8413 [1] STRAP-CABLE (WHITE)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 8R-7729 [1] HANDLE  
29. 6V-9505 M [2] SCREW-MACHINE (M3X0.5X25-MM)  
30. 138-8140 [1] SWITCH AS-PUSH BUTTON (CAP)(TRANSMISSION DOWNSHIFT)  
31. 4E-3949 [1] BOOT  
32. 159-6166 [1] HARNESS AS  
33. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070512
 

9U-0510: CONTROL GP-PILOT OPERATED HYD

9U-0510 CONTROL GP-PILOT OPERATED HYD -2-FUNCTION
S/N 9JK471-99999
PART OF 117-1400, 117-1405 OPERATOR AR, 121-9295 OPERATOR AR-NON-ROPS
i00998325 SEBP2307
9U0510 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8625 [1] ELBOW  
2. 3K-0360 [1] SEAL-O-RING  
3. 4E-9271 CI [1] HOSE AS  
4. 9X-2040 M [4] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
5. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
6. 6V-8636 C [6] CONNECTOR  
7. 3J-1907 C [10] SEAL-O-RING  
8. 6V-8397 C [4] SEAL-O-RING  
9. 102-1810 [1] SHEET  
10. 102-1811 [1] GASKET  
11. 6E-5019 Y [1] VALVE GP-PILOT (2-FUNCTION)  
12. 4E-7822 [1] CONTROL GP-HANDLE  
12A. 106-4540 [1] ROD  
12B. 8T-6885 BE TUBE-HEAT SHRINK (19.05-MM DIA)(7 CM)  
12C. 8L-8413 [1] STRAP-CABLE (WHITE)  
12D. 8T-4244 M [1] NUT (M12X1.75-THD)  
12E. 8R-7729 [1] HANDLE  
12F. 6V-9505 M [2] SCREW-MACHINE (M3X0.5X25-MM)  
12G. 8R-7730 [1] COVER-HANDLE  
12H. 4E-3949 [1] BOOT  
12I. 9X-4959 [1] SWITCH AS-PUSH BUTTON  
    (TRANSMISSION DOWNSHIFT)
12J. 4E-7462 [1] HARNESS AS (DOWNSHIFT)  
13. 113-0957 [2] ROD  
14. 8T-4244 M [2] NUT (M12X1.75-THD)  
15. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
16. 6V-8724 C [2] ELBOW  
17. 130-4531 C [1] VALVE GP-MANUAL  
18. 8C-0564 [1] CONNECTOR  
19. 9C-1250 I [1] HOSE AS  
20. 113-0905 [1] LEVER  
21. 4B-4276 [1] WASHER (7X16X1.6-MM THK)  
22. 104-3601 M [1] SCREW-MACHINE (M5X0.8X25-MM)  
23. 8T-0286 M [4] BOLT (M5X0.8X8-MM)  
24. 3S-2093 [6] STRAP-CABLE  
25. 113-0958 [2] KNOB  
26. 8T-6876 C [1] ELBOW  
27. 6V-8398 C [3] SEAL-O-RING  
28. 6V-9837 C [1] TEE-SWIVEL  
29. 8T-4896 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070513
 

9U-1434: CONTROL GP-PILOT OPERATED HYD

9U-1434 CONTROL GP-PILOT OPERATED HYD -3-FUNCTION
S/N 9JK359-UP
PART OF 117-1381 HYDRAULIC AR
Type 1
i00188070 SEBP2307
9U1434 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8625 [1] ELBOW  
2. 3K-0360 [1] SEAL-O-RING  
3. 6V-9850 [1] ELBOW (90 DEGREE)  
4. 9X-2040 M [4] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
5. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
6. 6V-8636 C [7] CONNECTOR  
7. 3J-1907 [10] SEAL-O-RING  
8. 6V-8397 [3] SEAL-O-RING  
9. 102-1810 [1] SHEET  
10. 102-1811 [1] GASKET  
11. 6E-5020 Y [1] VALVE GP-PILOT (3-FUNCTION)  
12. 3S-2093 [6] STRAP-CABLE  
13. 113-0958 [2] KNOB  
14. 8T-4244 CM [3] NUT (M12X1.75-THD)  
15. 113-0957 [2] ROD  
16. 6V-8724 [2] ELBOW  
17. 102-1953 [1] VALVE-BALL (90-DEG, 3/4-16-THD)  
  6E-4546 [1] KIT-SEAL  
18. 8C-0564 C [1] CONNECTOR  
19. 9C-1250 I [1] HOSE AS  
20. 4E-7363 [1] LEVER  
21. 7Y-3282 [1] WASHER (1.6-MM THK)  
22. 6V-9492 M [1] SCREW-MACHINE (M4X0.7X25-MM)  
23. 7Y-3173 M [4] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
24. 4E-7822 [1] CONTROL GP-HANDLE  
25. 106-4540 [1] ROD  
26. 8T-6885 BE TUBE-HEAT SHRINK (19.05-MM DIA)(7 CM)  
27. 8L-8413 [1] STRAP-CABLE (WHITE)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 8R-7729 [1] HANDLE  
30. 6V-9505 M [2] SCREW-MACHINE (M3X0.5X25-MM)  
31. 8R-7730 [1] COVER-HANDLE  
32. 4E-3949 [1] BOOT  
33. 9X-4959 [1] SWITCH AS-PUSH BUTTON  
    (TRANSMISSION DOWNSHIFT)
34. 4E-7462 [1] HARNESS AS (DOWNSHIFT)  
35. 6V-8183 C [2] NUT-FULL (3/8-24-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070514
 

9U-1434: CONTROL GP-PILOT OPERATED HYD

9U-1434 CONTROL GP-PILOT OPERATED HYD -3-FUNCTION
S/N 9JK359-UP
PART OF 117-1381 HYDRAULIC AR
Type 2
i00188067 SEBP2307
9U1434 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8625 [1] ELBOW  
2. 3K-0360 [1] SEAL-O-RING  
3. 6V-9850 [1] ELBOW (90 DEGREE)  
4. 9X-2040 M [4] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
5. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
6. 6V-8636 C [8] CONNECTOR  
7. 3J-1907 C [13] SEAL-O-RING  
8. 6V-8397 C [2] SEAL-O-RING  
9. 102-1810 [1] SHEET  
10. 102-1811 [1] GASKET  
11. 6E-5020 Y [1] VALVE GP-PILOT (3-FUNCTION)  
12. 3S-2093 [6] STRAP-CABLE  
13. 113-0958 [2] KNOB  
14. 8T-4244 M [3] NUT (M12X1.75-THD)  
15. 113-0957 [2] ROD  
16. 6V-8724 C [3] ELBOW  
17. 130-4531 C [1] VALVE GP-MANUAL  
  6E-4546 [1] KIT-SEAL  
18. 8C-0564 C [1] CONNECTOR  
19. 9C-1250 I [1] HOSE AS  
20. 113-0905 C [1] LEVER  
21. 7Y-3282 [1] WASHER (1.6-MM THK)  
22. 8T-7500 M [1] SCREW-MACHINE (M4X0.7X35-MM)  
23. 7Y-7388 CM [4] SCREW-BUTTON HEAD (M5X0.8X12-MM)  
24. 4E-7822 [1] CONTROL GP-HANDLE  
25. 106-4540 [1] ROD  
26. 8T-6885 BE TUBE-HEAT SHRINK (19.05-MM DIA)(7 CM)  
27. 8L-8413 [1] STRAP-CABLE (WHITE)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 8R-7729 [1] HANDLE  
30. 6V-9505 M [2] SCREW-MACHINE (M3X0.5X25-MM)  
31. 8R-7730 [1] COVER-HANDLE  
32. 4E-3949 [1] BOOT  
33. 9X-4959 [1] SWITCH AS-PUSH BUTTON  
    (TRANSMISSION DOWNSHIFT)
34. 4E-7462 [1] HARNESS AS (DOWNSHIFT)  
35. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
36. 8T-6876 C [1] ELBOW  
37. 6V-8398 C [3] SEAL-O-RING  
38. 4E-9271 CI [1] HOSE AS  
39. 6V-9837 C [1] TEE-SWIVEL  
40. 8T-4896 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070515
 

9U-1434: CONTROL GP-PILOT OPERATED HYD

9U-1434 CONTROL GP-PILOT OPERATED HYD -3-FUNCTION
S/N 9JK359-99999
PART OF 117-1381 HYDRAULIC AR, 157-2531 HYDRAULIC AR-3 VALVE
i00188068 SEBP2307
9U1434 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8625 [1] ELBOW  
2. 3K-0360 [1] SEAL-O-RING  
3. 6V-9837 [1] TEE-SWIVEL  
4. 9X-2040 M [4] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
5. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
6. 6V-8636 C [7] CONNECTOR  
7. 3J-1907 C [12] SEAL-O-RING  
8. 6V-8397 [2] SEAL-O-RING  
9. 102-1810 [1] SHEET  
10. 102-1811 [1] GASKET  
11. 6E-5020 Y [1] VALVE GP-PILOT (3-FUNCTION)  
12. 3S-2093 [6] STRAP-CABLE  
13. 113-0958 [2] KNOB  
14. 8T-4244 M [3] NUT (M12X1.75-THD)  
15. 113-0957 [2] ROD  
16. 6V-8724 [3] ELBOW  
17. 130-4531 [1] VALVE GP-MANUAL  
  6E-4546 [1] KIT-SEAL  
18. 8C-0564 [1] CONNECTOR  
19. 9C-1250 I [1] HOSE AS  
20. 113-0905 [1] LEVER  
21. 4B-4276 C [1] WASHER (7X16X1.6-MM THK)  
22. 104-3601 CM [1] SCREW-MACHINE (M5X0.8X25-MM)  
23. 8T-0286 CM [4] BOLT (M5X0.8X8-MM)  
24. 4E-7822 [1] CONTROL GP-HANDLE  
25. 106-4540 [1] ROD  
26. 8T-6885 BE TUBE-HEAT SHRINK (19.05-MM DIA)(7 CM)  
27. 8L-8413 [1] STRAP-CABLE (WHITE)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 8R-7729 [1] HANDLE  
30. 6V-9505 M [2] SCREW-MACHINE (M3X0.5X25-MM)  
31. 8R-7730 [1] COVER-HANDLE  
32. 4E-3949 [1] BOOT  
33. 9X-4959 [1] SWITCH AS-PUSH BUTTON  
    (TRANSMISSION DOWNSHIFT)
34. 4E-7462 [1] HARNESS AS (DOWNSHIFT)  
35. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
36. 8T-6876 [1] ELBOW  
37. 6V-8398 [3] SEAL-O-RING  
38. 4E-9271 I [1] HOSE AS  
39. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070516
 

106-2359: CONTROL GP-STEERING

106-2359 CONTROL GP-STEERING
S/N 9JK359-UP
PART OF 106-2355 OPERATOR AR
i00188295 SEBP2307
1062359 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 2T-3360 [1] BUTTON AS-HORN  
3. 8R-2917 [1] STEERING WHEEL  
4. 8Y-7680 Y [1] STEERING COLUMN GP  
5. 4E-0156 [1] BOOT  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 8T-8906 [2] BOLT (3/8-24X0.75-IN)  
8. 4E-0154 [1] BRACKET  
9. 106-2366 [1] SUPPORT AS  
10. 6N-6984 [3] MOUNT-RUBBER  
11. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
12. 8T-4133 M [3] NUT (M10X1.5-THD)  
13. 7X-3183 [2] BOLT (3/8-24X1-IN)  
14. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
16. 4E-0158 [1] PLATE (RH)  
17. 4E-0155 [1] PLATE (LH)  
18. 7X-4797 [1] SEAL-STEERING SHAFT  
19. 5C-9553 M [2] BOLT (M6X1X16-MM)  
20. 4E-0716 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
21. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
22. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
23. 3S-2093 [3] STRAP-CABLE  
24. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070517
 

106-2359: CONTROL GP-STEERING

106-2359 CONTROL GP-STEERING
S/N 9JK359-99999
PART OF 106-2355, 117-1400, 117-1405 OPERATOR AR, 121-9295 OPERATOR AR-NON-ROPS
i00188296 SEBP2307
1062359 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 2T-3360 [1] BUTTON AS-HORN  
3. 8R-2917 [1] STEERING WHEEL  
4. 8Y-7680 Y [1] STEERING COLUMN GP  
5. 4E-0156 [1] BOOT  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 8T-8906 [2] BOLT (3/8-24X0.75-IN)  
8. 4E-0154 [1] BRACKET  
9. 118-1747 C [1] SUPPORT AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  7T-1099 [3] LINK  
  8T-3490 M [9] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [6] NUT-WELD (M8X1.25-THD)  
  9C-8895 M [2] BOSS-TAPPED (M10X1.5-THD)  
10. 6N-6984 [3] MOUNT-RUBBER  
11. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
12. 8T-4133 M [3] NUT (M10X1.5-THD)  
13. 7X-3183 [2] BOLT (3/8-24X1-IN)  
14. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
16. 105-8896 C [2] PLATE  
17. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
18. 7X-4797 [1] SEAL-STEERING SHAFT  
19. 5C-9553 M [2] BOLT (M6X1X16-MM)  
20. 4E-0716 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
21. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
22. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
23. 3S-2093 [3] STRAP-CABLE  
24. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070518
 

111-0480: CONTROL GP-STEERING

111-0480 CONTROL GP-STEERING
S/N 9JK359-470
PART OF 106-2435 OPERATOR AR, 106-3059 OPERATOR AR-NON-ROPS
i00188419 SEBP2307
1110480 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 2T-3360 [1] BUTTON AS-HORN  
3. 8R-2917 [1] STEERING WHEEL  
4. 8Y-7680 Y [1] STEERING COLUMN GP  
5. 4E-0156 [1] BOOT  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 8T-8906 [2] BOLT (3/8-24X0.75-IN)  
8. 4E-0154 [1] BRACKET  
9. 106-2366 [1] SUPPORT AS  
10. 6N-6984 [3] MOUNT-RUBBER  
11. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
12. 8T-4133 M [3] NUT (M10X1.5-THD)  
13. 7X-3183 [2] BOLT (3/8-24X1-IN)  
14. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 7X-4797 [1] SEAL-STEERING SHAFT  
16. 5C-9553 M [2] BOLT (M6X1X16-MM)  
17. 4E-0716 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
18. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
19. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
20. 3S-2093 [3] STRAP-CABLE  
21. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-7547 M [3] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23070519
 

107-6219: CONTROL GP-TRANSMISSION

107-6219 CONTROL GP-TRANSMISSION
S/N 9JK359-682
PART OF 108-3029 CONTROL GP-TRANSMISSION
i00188350 SEBP2307
1076219 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 970F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-3673 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 9G-3668 [1] HOUSING-PLUG  
3. 7N-7779 [6] SOCKET-CONNECTOR (14-GA TO 18-GA)  
4. 7N-7780 [9] PIN-CONNECTOR (14-GA TO 18-GA)  
5. 9G-3695 [4] PLUG-SEAL  
6. 6V-9673 M [4] SCREW-MACHINE (M5X0.8X12-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Technical Information Bulletin
Multiple Registration Messages Occur with Product Link{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Service Magazine
New Gauges Available {7450}
2010/07/08
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/09/11
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

Caterpillar Parts SIS Catalog 970F :

152-2667 CONTROL GP-MONITOR
112-1572 CONTROL GP-MONITOR
CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR
100-5778 CONTROL GP-MONITOR
CONDENSER & MTG GP-REFRIGERANT
6I-0161 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
106-7634 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
106-7634 COMPRESSOR GP-REFRIGERANT
CONTROL GP-PILOT OPERATED HYD
9U-0510 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
9U-0510 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
9U-1434 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
9U-1434 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
9U-1434 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-STEERING
106-2359 CONTROL GP-STEERING
CONTROL GP-STEERING
106-2359 CONTROL GP-STEERING
CONTROL GP-STEERING
111-0480 CONTROL GP-STEERING

Truck sale:

 
 
CAT 970F

RD Williams Parts
2017 CAT 970F
 
2017 CAT 970F

Pickett Equipment Parts
CAT 970F
USD $58,000 
CAT 970F

RP Equipment
Allentown, Pennsylvania
CAT 970F
USD $57,000 
CAT 970F

RP Equipment
Allentown, Pennsylvania
1995 CAT 970F
USD $45,000 
1995 CAT 970F

AAA Machinery Parts & Rentals
Doral, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.